HELP ME TO LAUNCH J2SE 1.4.1_02

GOOD MORNING
MY NAME'S WALTER PORCELLINI AND I'M A PLC PROGRAMMER
IN ITALY WE'RE STUDING THIS SySTEM (TINI)
AFTER SOME RESEARCH I DOWNLOADED THIS VERSION OF SOFTWARE:
-J2SE SDK1.4.1 _02
FINISH TO DOWNLOAD I HAD INSTALL ALL WITH SUCCESSFULL
BUT WHEN I OPEN THE COMMAND PROMPT A WRITE :
C:\>JAVA (AND THE ANSWER IS)
USAGE :...............
(AFTER I WRITE)
C:\>JAVA C ( TO LAUCNH )
(Or=
C:\>JAVAC ( TO LAUNCH)
(THE ANSWER IS ):
Exception in thread "main" java.lang.NoClassDefFounfError:C
how can i open the compiler???
my system is windows2000 prof.
and i downloaded NEtbean 3.4.2 too and installed it
in italy is impossible to find this system TINI
and by other europe sites is very difficult to have informations
please help i like this system
thank you for help me
walter

About TINI DOWNLOADS
http://www.ibutton.com/TINI/downloads.html

Similar Messages

Need help FLASH not launching and not uninstalling "licensing for this product has stopped working".

Need help FLASH not launching and not uninstalling "licensing for this product has stopped working" and " you can only install one adobe product at a time please complete the other installation" Flash was working absolutely fine before, I have no idea why this happened.

I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?

Help, Where can I download J2SE 1.3.1_02 API Docs?

I've been looking thru Sun's Docs, but I can't find the Source API of all classes of 1.3.1_02 for reference and usage. Could someone point me to the correct web site for this?
Tks Ran

You can download all documents include tutorial.
http://java.sun.com/docs/index.html

HELP Itunes wont launch after upgrading

I downloaded the latest Itunes, and then tried to launch it.
I keep getting the following message
"error getting file security :\C\program files\get last error 5
I have even tried to remove I tunes through the add & remove section in the control panel, but this also does not allow me to do this and i get the same message.
Can someone help ???

I just bought a new iPod Nano and installed iTunes 7.02 sucessfully and it wont launch at all...it simply sits there.
some preliminary questions.
are you getting an error message? if so, what does it say? include error message numbers if you're getting any.
or are you getting no error messages whatsoever when you try to launch itunes?
if you're getting no error messages whatsoever, do you just see the wee hourglass for a few seconds, and then nothing? if so, do you also have Norton Internet Security 2005 installed on that PC?
also, reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds?

Acrobat X - Online help does not launch

I'm using Acrobat X, version 10.1.0 on Windows XP and IE 8.
When I click Help, the browser window opens, but the help does not load. How do I fix this?

Thanks - Note that I did try searching for a solution on the Internet and in the forums, but didn't find the article because I used "launch" instead of "display".
I'll have to use one of the workarounds in the article because I cannot open the help from the Acrobat Help menu.

Just installed J2SE 1.3.1_02, want Java Swing

I installed version 1.3.1_02 SE and tried a simple application using Swing extentions. Received compiler errors for Swing classes. Something like can't resolve JLabel, JFrame, etc. Also, I can't find swing.jar on my system. Can someone help me resolve this?
my email adr is: [email protected]
Tks Randy

He is trying to get the archive with the JavaDocs, they were removed from the site.
Try downloading and using the javadocs from the JDK 1.4 instead (and get a lot of compilation errors when using new APIs - check the @since tags in the javadoc... )
Another alternative is:
Unzip the 1.3 sources (they are in src.zip) and use the javadoc tool (preferably from the 1.4 version, because the javadoc tool from the 1.3 can not recursively get the packages - you will have to specify the packages yourself if using the javadoc tool from 1.3) to regenerate the HTML files. (You will need a machine with 512MB of memory or more, and some CPU hours.) The src.zip has not the package.html files, so the generated javadocs will not be exactly equal to the original javadoc files.
I believe that some IDEs like Oracle jDeveloper 9 have the javadocs from 1.3. Maybe someone has archived the javadocs from 1.3.

Help on Linux with JRE 1.3.1_02!!!

Well..hello.
Here is my Problem:
I Dloaded the JRE 1.3.1_002.bin file and instaled it. No Problems, nu Errors, nothing.
But for Example, Limewire still doesn't work! It says that
"No Java Viritual Machine could be found from your Path Enviroment.
Youmust install a VM prior to use this Programm."
Well, sounds like Limewire is too stupid, I know. BUT: Other Programs like "Go ICQ"
( http://go.icq.com ) aren't working too, so there is definitivley a Prob wit my java.
There is a jre 1.3.1_02 directory in my /home directory, and I can run the Control Panel. I told him to use the RE in my /home directory...and I told Konqueror to use the Ns4 Plugin...But nothing works!
I am runing Mandrake 8.2 on a i386 class system....
Please help, I really need ICQ and Limewire...

Ok, I had the same problem! Goto settings>Configure Konqueror>Konqueror Browser>Java; and enable java globally! (however, the icq is just sooo slow and it "I don't know how to say it in english" all the time, then I have to Ctrl+Alt+Esc all the windows...)

BT Broadband Desktop Help suddenly stopped launchi...

Broadband Desktop Help has been working fine for 3 months but I have been unable to launch it for the last 3 days. I have uninstalled and re-installed it but to no avail. I'm a broadband novice so woulkd welcome any help or suggestions.

You may like to try the instructions on the link below, which was written by one of the support people.
Problems with Desktop Help
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

HELP HELP HELP - Itunes wont launch

Everytime i try to Launch itunes, i get an error message saying 'Itunes has encountered a problem and needs to close - sorry for any inconvienience caused'. I have tried re-installing and all kinds of stuff. Am now at the point of smashing my pc as i cant update my ipod and i hate windows media player !!! Help Help Help !!
My firewall software is Panda Platinum Internet Security 2006 - does this affect it as i have read that some firewall programmes are not compatible with itunes (although it worked fine before).
PC Windows XP

In windows goto control panel> add and remove and uninstall iTUnes AND quicktime. You will not loose any music or playlist. THen go here and roll down to "Clean up iTunes installer files on the computer" http://docs.info.apple.com/article.html?artnum=93976
Now scan your system for malware woth Ewido http://www.ewido.com
Once thats done disable antivirus and security programs then goto apple.com to download/install the latest version of iTUnes

Help, address book launches firefox

Everytime I launch address book, firefox boots too. I believe address book thinks Firefox is my default browser, and I'm guessing the "Add URL to <browser>" menu item in Address book wants to connect to Firefox even though it isn't running, because my menu item says "Firefox". However, Firefox is no longer my default browser, Chrome is. Firefox hasn't been my default browser for months, and I keep setting Chrome to be my default browser, but the Address Book just doesn't listen.
I hate having to wait for Firefox to book just to find an address. Help please.

Gaygilmore, have you had any additional insights into your problem, which I share? In my case I sync my address book through MobileMe and have the same data on two different computers. What's puzzling is that one computer launches Firefox when Address Book is launched but on the other I don't see this behavior. The two computers run the same OS X version, both have Chrome as the default browser and both have Firefox installed. Of course there are other variations with the apps, plug-ins and extensions installed on each computer so this is not a completely same to same comparison.
And are you really still running OS X 10.4.7?
Steps I've taken: 1) uninstalled Firefox and deleted the Firefox prefs file and emptied Trash. In this case when Address Book launches it is apparently still looking for Firefox so I get a dialog box asking me to indicate where Firefox is. 2) Deleted Quicksilver. No change. 3) checked selected URLs in the address book contacts after uninstalling Firefox. Clicking on a URL opens the page in Chrome. No love so far.

BT Broadband Desktop Help - Failure to launch

I have been trying to access my desktop help (initially installed from BT Infinity Disc) wtih no success, it would launch but several aspects would not permit me to see the relevant pages of help. So I checked online and saw I could download the program which I have now done. The new version won't launch at all. I get a script error coming up asking if I want scripts to run but when I click yes nothing happens.
I am running 64-bit windows 7 on my laptop which is having the desktop problems. On our main pc (windows XP) we have no issues at all.
This has all come to a head as I'm trying to network the printers on the pc with the laptop and I can't use the Broadband help wizard to connect them all together.
Any advice on how to resolve the help installation/launch would be apprieciated. I am going to try reloading it all from the disc to see if that makes any difference.

try completing the steps below :-
Click start - All programs - BT Broadband Desktop Help - Uninstall (also look in add/remove programs)
Open task manager, check and if found:
remove BTHelpNotifier.exe
remove McciServiceHost.exe
remove McciTrayApp.exe
stop McciCMService.exe in services (control panel - Administrative Tools - Services)
In registry, delete the following (start - Run - Regedit)
HKEY_LOCAL_MACHINE\SOFTWARE\Motive
HKEY_CURRENT_USER\Software\Motive
delete the following folders if still present
C:\Program Files\Common Files\Motive
C:\Program Files\BT Broadband Desktop Help
Important - RESTART YOUR PC
Download the latest Desktop help client from www.bt.com/help/broadbandhelp

Help does not launch after upgrading from RH5 to RH7

My problem is similar to CaroMe1's. Topics within chm files
created using RH5 and integrated into our software product launch
correctly when a Help button is clicked on a dialog. After
upgrading to RH7, using the the same project files, chm files
created using RH7 do not launch at all; that is, nothing happens
when a Help button is clicked on any dialog.
Thanks in advance for any advice!

The .chm filename and the .xpj filename are the same.
Sorry if I was swerving and incoherent! I probably shouldn't
have posted after traveling and no sleep!
Here is how I tested for the source of this problem:
1. I created a .chm file using RH 5, integrated it into our
product, clicked on the Help button on any of our dialogs, and the
appropriate Help topic displayed.
2. I created a .chm file using RH 7 (using the exact same
project files as in the previous step), integrated it into our
product, clicked on the Help button on any of our dialogs, and
nothing happened. No topic, no Help. Nothing.
Is that a better description of the problem? (I hope)
Thanks again!

Help--Mac Help won't launch.

My Mac Help application (G4 Powerbook, OS 10.3.9) has stopped launching. When I lick on the Help menu, the life preserver icon briefly appears in the Dock, then disappears again.
I had this problem once before when the machine was still under warranty, and I remember that the Apple techie had look in a folder nd discard several things--I think it involved a com.apple.something folder and a plst, but not certain--and after that Help worked fine again, but I can't find my notes. Would be most grateful if anyone could tell me how to fix this--thanks!

hi,
you're right. you have to delete all the helpviewer preference files. here's how it works:
launch the find window (command f)
search on your local HD for files containing helpviewer in its name
in the search result window select all files with the .plist ending (located in the preferences folder) and delete them
relaunch helpviwer application, it should work properly again
i did it on my mac serveral times and it worked fine.
hope it helps
Message was edited by: Matthias Schulz

Help fails to launch in Adobe Reader X

I've installed Adobe Reader X on an Windows XP SP3 PC. When I press <F1> or choose in the menu Help F1, help doesn't start but a error box pops up:
I'll try to translate it: "The content off the online help can not been shown. Check if you can start the web browser or if you have authorization te the internet".
All the other help have not this issue. When I click for help | Online support ... the web browser will start and show the webpage.
This problem occurs on our “closed” PC and also on an Windows 7 PC. When I run it on an stand-alone PC with Internet connection it works perfectly.
By the way, the protected mode is disabled.
Who can help me?
With kind regards,
Johan de Man

That's the problem. When saving MS Word 2007 documents that had headings in them as PDFs, the headings were converted to bookmarks. I can go back and open documents prior to mid-December 2011 and they have their bookmarks, but PDFs created in Word 2007 after that period (about the time I upgraded my Adobe Reader from 9 to X), do not have their headings converted to bookmarks.

Flash Help Won't Launch from Sharepoint

The Flash Skin Elements won't lauch when open from a
sharepoint site. Is there a Flash Secruity Issue.

Hi RoboHelp Newbie
Perhaps the following Technical Note will help?
Click here to read the
Technical Note
Cheers... Rick

HELP ME TO LAUNCH J2SE 1.4.1_02

Similar Messages

Maybe you are looking for