Help me to solve My A135 - 4257

I had bought A135-4257 a round year ago and now have a problem which is when i turn on the button only power light is display and the disk light only blink for once time, a hear the fan running and no display on the monitor..kindly please help me to solve this problem

Unplug the AC adaptor, remove the battery, then press and hold the power button down for a minimum of 30 seconds. Now replace the battery and see if it boots. If not repreat the process but this time leave the battery out and only plug in the AC. If it still doesn't boot repeat the process again and this time replace the battery and plug the AC back in. If it still doesn't boot it's time to start checking the hardware. Remove the ram and try it with only one stick. You might need to try each one individually to see if either works. If that doesn't help remove the hard drive and see if it will post to the Toshiba screen. If that doesn't help you'll probably need to take it to a service center.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Similar Messages

Please help me to solve the issue in my query.

Hi All,
Please help me to understand the mistake what i did in below query and help to resolve that.
Actually i am trying to create a query to filter the records from db based on my input parameter.
If my input parameter is 1(@showallrecords) then i need to show all the records which has the IsLatest as 1
If my input parameter is 0(@showallrecords) then i need to show all the records which has the IsLatest as 0
select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
and (@showallrecords = 1 and tabel1.IsLatest = 1 )
and (@showallrecords = 0 and tabel1.IsLatest = 0 )
when i am executing the above query with the parameter @showallrecords = 1 ,db is returning 0 rows.If i am executing the above query after removed the last line and (@showallrecords = 0 and tabel1.IsLatest = 0 ) then records are coming.
i understand that 1=0(last line) and the condition is not true.So its affecting the result.
Please help me to solve this.

select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
WHERE (tabel1.IsLatest = @showallrecords Or @showallrecords=0)

RFC Receiver adpater Connection problem , Help us to solve ?

Hi Friends ,
 Our scenarilo is Mail to RFC. It was running fine. In RFC Receiver adapter i have given Maximium connection property to 1 .
 While multiple set data passed to rfc will connection problem will come ?
 Most data not uploaded . I am getting the following error.
 If i set max connection to 5 . It is 5 times or more than that it is pusing the data .
 i am getting the following error while i set the Max connection to 1 . . Any other place i need to change configuration ?
 - Error: 2007-09-24 10:51:22 GMT-05:30: Message processed for interface YRFC_EXT_WARR: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[CC_EXTE_WAREN_2W_RFC_RECEIVER]e7fa21f86ec535e883636c0beffc0f0c is exhausted. The current pool size limit (max connections) is 1 connections.
 Please give the description . I have referred many likns . Help us to solve this problem .
Regards.,
V.Rangarajan
Message was edited by:
 ranga rajan

Hi,
Have a look at this.This will help you.
1.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
2. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Message was edited by:
 Akshay Jamgaonkar

Help me to solve this

I can't view My JSP file I am getting Error Message
Java Compile not Found
Unable to Compile the Source file for JSP
I copied tools.jar to servers lib dir
But Yet i get the same message
Pls help me to Solve this Problem

Most common cause of the problem: JAVA_HOME environment variable not set, or set incorrectly.
It should point to your java directory: ie C:\java1_4\ NOT C:\java1_4\bin
Another possible cause is spaces in the path names where you have installed applications.
Check out this page: http://www.coreservlets.com/Apache-Tomcat-Tutorial/ for a tutorial on installing tomcat.
If you can't sort it out on your own, we need more info:
Where have you installed Java?
Where have installed Tomcat?
What is the value of JAVA_HOME environment variable?
Good luck,
evnafets

Help me to solve this assignments...

1. Write a program to print a triangle multiplication table as shown below:
0
0 2
0 3 6
0 4 8 12
0 5 10 15 20
0 6 12 18 24 30
0 7 14 21 28 35 42
2.Write a Java program that will display the factorial of the number 10.
3.Write a Java Program to display a four by four identity matrix
4.Write a program to calculate the sum of the odd integers between 1 and 99 using for loop.
kindly help me to solve this assignment.

Am I correct in all???
class Assignment
 public static void main(String args[])
 //This is to print the numbers in triangle
 for(int i = 1; i < 8; i++)
 for(int j = 0; j < i; j++)
 System.out.print(" " + i*j);
 System.out.println("");
 //print value for 10 factorial
 int factorialvalue=1;
 int f=6;
 for(int l=f;l>1;l--)
 factorialvalue*=l;
 System.out.println("F values is "+factorialvalue);
 //4 x 4 Matrix
 for(int s=0;s<4;s++)
 for(int m=0;m<4;m++)
 System.out.print("("+s+","+m+") ");
 System.out.println("");
 //sum of odd numbers up to 99
 int h=0;
 for (int b=1;b<10;b+=2)
 h+=b;
 System.out.println("Sum is "+h);
selva.

Can you help me to solve this problem (user-exit for xd02)

Hi!
can you help me to solve this problem?
transaction XD02
To pass the length of the field to 7 max for KNA1-SORT (Search criterion 1 )
To pass the length of the field to 4 max for ADRC-SORT2 (Search criterion 2)
It is not possible to save the customer card as long as the search criterion is not univocal
I seek one to use-exit .
Thanks.

Hi,
Check the exit SAPMF02D.
Regards,
Surinder

Dear , please help me to solve my problem in activating my iPhone Where I lost it since 3 months and when found it cannot activating my ID Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at

Dear , please help me to solve my problem in activating my iPhone
Where I lost it since 3 months and when found it cannot activating my ID
Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
My iPhone data
Ime: ****
Model: A1332
FCC ID : BCG-E2380A
IC: 579C-E2380A
MY id at cloud ****
Password ( ****)
My country : Egypt
MY EMAIL : ****
Tell no: ****
<Personal Information Edited By Host>

The following may help:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
If you didn't receive your Apple ID verification or reset email - Apple Support

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring,so i open cimcas now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and Network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.

Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.

Please can you help me to solve my problem ( I have iphone is linked with Apple ID and I forgot that Apple ID and I can't remember it , I need thats Apple ID to activate my iphone ,,, what should I do ?

please can you help me to solve my problem ( I have iphone is linked with Apple ID and I forgot that Apple ID and I can't remember it , I need thats Apple ID to activate my iphone ,,, what should I do ?

mohammed aljasim wrote:
there are many people that error is happened with them and one of this people is me ,, Apple must be find the solution for this problem
You are absolutely WRONG. Apple bears no responsibility in this at all. YOU purchased a STOLEN phone. You are guilty of receiving stolen property at best. Take it back to wherever you bought it and demand a refund. Failing that, turn it over to the police. You got ripped off. I'm sorry you wasted your money, but there is NOTHING Apple or anyone else can do for you. Only the rightful owner of the phone can unlock it.

Please help me to solve error: Split mapping created no messages

Hi Experts,
I am facing Split mapping created no messages when i run my scenario.
My Scenario is : Proxy to FILE.
I am triggering Proxy and based on one condition i am generating different Flat Files.
Now when i do this i am getting error :Split mapping created no messages in SXI_MONITOR.
When i check this in Message Mapping by taking data from SXI_MONI its working fine...
but when i trigger the data from RUNTIME WORKBENCH its throughing the error.
When i remove the NameSpaces <ns0:message>
and <ns0:messages1> its working fine.
How can i solve this issue.
Even though i removed Namespace in Message Type, i am getting the error.
I changed occurance of Target message to O..unbounded both in Message Mapping and Interface Mapping.
Its working fine in Message Mapping, problem occurs only when i run end-to-end scenario.
So please help me to solve this issue.

I think there might be mismatch between your name spaces.
may be this link might help you
Split mapping created no messages -Mluti Mapping
are you getting the same structure from your proxies whatever structure you have in your XI structure(sender) and NS should match.
but I dont have exp with proxies.
Sri

Please help me to solve the problem ---it's urgent

hi everybody
my application is deployed on the weblogic 9.0. I am using the VB DLL through which i am sending the request to the servlet.
When i am pressing the "Color" button in VBDLL to retrieve the color information, server takes the long time nearly 10-12 minutes to return back the color information but it throws the following error
<Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "621" seconds working on the request "Http Request: /sales/appFindSize.jsp", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
java.lang.Object.wait(Native Method)
java.lang.Object.wait(Object.java:474)
javelin.client.JobWaiter.blockUntilFinished(JobWaiter.java:45)
javelin.client.ClientUtilsImpl.build(ClientUtilsImpl.java:838)
weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:244)
weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:200)
weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:164)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:224)
weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:383)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:298)
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3022)
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1925)
weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1848)
weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1288)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
please help me to solve this error it is urgent.
Thanks in advance
Pandurang S. Pokharkar

Exchange rates can be entered as a direct or indirect quotation. You can maintain two prefixes that
can be used to differentiate between direct and indirect quotations exchange rates during input and
display. If you don´t set up a prefix, the standard setting is valid:
 (blank, without a prefix) for direct quotation exchange rates
 / for indirect quotation exchange rates
n Scenario 1: If you use mainly direct quotation exchange rates and indirect quotation occurs seldom,
use the default configuration. In this way you can enter direct quotation exchange rates without a
prefix.
n Scenario 2: If, in addition to direct quotation exchange rates, the handling of indirect quotation is
required, you should define a prefix that is not blank for both quotation types, e.g.:
 * for direct quotation exchange rates, / for indirect quotation exchange rates
 If you follow this suggestion, the configuration does not allow exchange rates to be entered
without a prefix, an error message occurs. Thus users are forced to consider which the correct
quotation is and enter the rate with a valid prefix.
n Scenario 3: If indirect quotation is the major notation at your company, you can configure the
settings this way:
 * for direct quotation exchange rates, (blank) for indirect quotation exchange rates
 This configuration allows indirect quotation exchange rates to be entered without a prefix whereas
the less used direct quotation exchange rates have to be entered with a prefix.

Hello Experts Please help me to solve this problem.

Hello Experts,
I am getting a problem while installing the SOLUTION MANAGER 4.0.
in step 17/45 IMPORT ABAP :
the problem is :
ERROR 2008-04-29 03:10:28.110
CJS-30023 Process call '/usr/sap/SLM/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
when i saw R3load.exe.log file it has the following contain :
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SLM/SYS/exe/run/R3load: START OF LOG: 20080428095833
/usr/sap/SLM/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
/usr/sap/SLM/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jul 14 2007 02:19:03
/usr/sap/SLM/SYS/exe/run/R3load -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/SLM/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SLM/SYS/exe/run/R3load: END OF LOG: 20080428095834
Please can any body help me to solve this problem.
waiting for fast response, as my installtion is pending due to this problem.
have a nice day.
Regards,
Shivendra.

Hi,
The following should be verified:
(1) check what DB instances the listener currently is aware of. This can be done with the command 'lsnrctl services'.
(in case you listener does not have the default name LISTENER, then use 'lsnrctl services <listener name>' )
(2) Perhaps there is an issue with the dynamic instance registration, even though the error code is different, you should nevertheless check the points from note #563574.
(3) Verfiy the value of the parameter local_listener (see mentioned note). Since you have changed the listener, the parameter might still be wrong.
In case local_listener is correcly set you should give the command
ALTER SYSTEM REGISTER;
a try.
Best Regards,
Michael

Please help me to solve this problem.

Hi , can someone help me to solve the following problem:
1) I wrote two different client and server program, (Using UDP)
2) In the server side for testig I wrote some code like when a client sending message to server
a) server find on the database only senders IP address then server return the message to sender
b) Again if server find out other IP address too then it returns to them too
3) but it working for (a) , but not for (b)
4) Actually, its sending message but client not getting it
So, can some tell me, how to modify server or client side
Server wont reply the msg to the same IP address/ Sender who sent the message.
Server will reply the message to other person..
For example, Alace, Bob and Carrry are three clients. Alace, Bob, and Carry are online now. When they get online server save there IP address.
Now, Bob sends a message to server , then server will send the message to Alace and Carry. Not to the sender Bob.
Thanks]
I am giveing a pice of coding of server side
else
IPAddressObject addressObjectt;
onlineUserList.reset();
for(int i=0; i<onlineUserList.lengthIs(); i++)
addressObjectt=(IPAddressObject)onlineUserList.getNextItem();
IPAddress=addressObjectt.getAddress();
System.out.println("\n this is not same : "+IPAddress);
if(addressObject.compareTo(addressObjectt)!=0)
System.out.println("\n this is not same : "+sentence);
String cSentence=sentence.toUpperCase();
sendData=cSentence.getBytes();
DatagramPacket sendPacket= new DatagramPacket(sendData, sendData.length, IPAddress,port);
System.out.println("\n aaaaaaa : "+IPAddress);
client.send(sendPacket);
else
System.out.println("\n this is same : "+sentence);
String cSentence= sentence.toUpperCase();
sendData=cSentence.getBytes();
DatagramPacket sendPacket= new DatagramPacket(sendData, sendData.length, IPAddress,port);
client.send(sendPacket);
System.out.println("\n this is same : "+cSentence);
}//for
}//else
Edited by: kidylimp on Apr 8, 2008 12:16 PM

This looks suspiciously like a cross-post
[http://forum.java.sun.com/thread.jspa?threadID=5283608]

Please help me to solve this date comparision issue..

Please help me to solve this issue..
If i have some data like the following..
ID START DATE END DATE
1 20080101 20080501
1 20080502 20080630
2 20080631 20080801
2 20080802 20080901
 ---------------> There is a break in date over here
2 20080930 20081029
2 20081030 20081130
I need to compare the End Date with the start date (These data will not be in order)
and find out if there is any break and should get the output date : *20080930*
I am trying to do this in SQL or PL/SQL.Please help me .
Thanks in advance.
phani

Hi Frank ,
Sorry to bug you again. I ran your code on my actual data but not gettting the expected output.Here i am posting the actual code and the output that i got when i ran your code.Please bear with me and help me to solve this..
/* Formatted on 5/25/2009 2:27:24 PM (QP5 v5.115.810.9015) */
SELECT member_nbr,
 aff_nbr,
 ymdeff,
 ymdend,
 gap_before,
 COUNT (gap_after)
 OVER (PARTITION BY member_nbr, aff_nbr ORDER BY ymdend DESC)
 AS gap_cnt
FROM (SELECT member_nbr,
 aff_nbr,
 ymdeff,
 ymdend,
 CASE
 WHEN ymdeff >
 LEAD(ymdend)
 OVER (PARTITION BY member_nbr, aff_nbr
 ORDER BY ymdend DESC)
 + 1
 THEN
 1
 END
 AS gap_before,
 CASE
 WHEN ymdend <
 LAG(ymdeff)
 OVER (PARTITION BY member_nbr, aff_nbr
 ORDER BY ymdend DESC)
 - 1
 THEN
 1
 END
 AS gap_after
------------I need this SQL to filter the whole data to the data that i posted in previous post -----
 FROM ( SELECT ms1.member_nbr,
 ms1.aff_nbr,
 ms1.ymdeff,
 ms1.ymdend,
 ms1.void
 FROM (SELECT ms.member_nbr,
 ms.aff_nbr,
 ms.ymdeff,
 ms.ymdend,
 ms.void
 FROM MEMBER mb, member_span ms
 WHERE mb.member_nbr = ms.member_nbr
 AND (20090523 BETWEEN ms.ymdeff
 AND ms.ymdend
 AND TRIM (void) IS NULL)
 AND mb.member_nbr = 'A1000073000 ')
 eff_pcp,
 member_span ms1
 WHERE ms1.member_nbr = eff_pcp.member_nbr
 AND (SUBSTR (eff_pcp.aff_nbr, 1, 6) =
 SUBSTR (ms1.aff_nbr, 1, 6))
 ORDER BY ms1.ymdeff DESC)
---------- end of my part ----------
 table_x) got_gaps;Outputs that i got when i ran that code for each individual members..
Sorry to bug you frank and thanks for all the help.I will post here if i get any other data.
Thanks
phani

Help me to solve My A135 - 4257

Similar Messages

Maybe you are looking for