Help me to solve my problem.

Sir,
I want to overlay a transparent image over my website post .
On clicking this transparent png image , it should be removed .
how is it possible with dreamweaver cs5.5.

OK, it's not very complex in principal - here's a bare example (click on the image):
http://www.materiaprima.co.uk/dev/test/image-overlay.html
Hope you get the idea
Kenneth Kawamoto
http://www.materiaprima.co.uk/

Similar Messages

Can you help me to solve this problem (user-exit for xd02)

Hi!
can you help me to solve this problem?
transaction XD02
To pass the length of the field to 7 max for KNA1-SORT (Search criterion 1 )
To pass the length of the field to 4 max for ADRC-SORT2 (Search criterion 2)
It is not possible to save the customer card as long as the search criterion is not univocal
I seek one to use-exit .
Thanks.

Hi,
Check the exit SAPMF02D.
Regards,
Surinder

Dear , please help me to solve my problem in activating my iPhone Where I lost it since 3 months and when found it cannot activating my ID Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at

Dear , please help me to solve my problem in activating my iPhone
Where I lost it since 3 months and when found it cannot activating my ID
Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
My iPhone data
Ime: ****
Model: A1332
FCC ID : BCG-E2380A
IC: 579C-E2380A
MY id at cloud ****
Password ( ****)
My country : Egypt
MY EMAIL : ****
Tell no: ****
<Personal Information Edited By Host>

The following may help:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
If you didn't receive your Apple ID verification or reset email - Apple Support

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring,so i open cimcas now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and Network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.

Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.

Please can you help me to solve my problem ( I have iphone is linked with Apple ID and I forgot that Apple ID and I can't remember it , I need thats Apple ID to activate my iphone ,,, what should I do ?

please can you help me to solve my problem ( I have iphone is linked with Apple ID and I forgot that Apple ID and I can't remember it , I need thats Apple ID to activate my iphone ,,, what should I do ?

mohammed aljasim wrote:
there are many people that error is happened with them and one of this people is me ,, Apple must be find the solution for this problem
You are absolutely WRONG. Apple bears no responsibility in this at all. YOU purchased a STOLEN phone. You are guilty of receiving stolen property at best. Take it back to wherever you bought it and demand a refund. Failing that, turn it over to the police. You got ripped off. I'm sorry you wasted your money, but there is NOTHING Apple or anyone else can do for you. Only the rightful owner of the phone can unlock it.

Hello Experts Please help me to solve this problem.

Hello Experts,
I am getting a problem while installing the SOLUTION MANAGER 4.0.
in step 17/45 IMPORT ABAP :
the problem is :
ERROR 2008-04-29 03:10:28.110
CJS-30023 Process call '/usr/sap/SLM/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
when i saw R3load.exe.log file it has the following contain :
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SLM/SYS/exe/run/R3load: START OF LOG: 20080428095833
/usr/sap/SLM/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
/usr/sap/SLM/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jul 14 2007 02:19:03
/usr/sap/SLM/SYS/exe/run/R3load -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/SLM/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SLM/SYS/exe/run/R3load: END OF LOG: 20080428095834
Please can any body help me to solve this problem.
waiting for fast response, as my installtion is pending due to this problem.
have a nice day.
Regards,
Shivendra.

Hi,
The following should be verified:
(1) check what DB instances the listener currently is aware of. This can be done with the command 'lsnrctl services'.
(in case you listener does not have the default name LISTENER, then use 'lsnrctl services <listener name>' )
(2) Perhaps there is an issue with the dynamic instance registration, even though the error code is different, you should nevertheless check the points from note #563574.
(3) Verfiy the value of the parameter local_listener (see mentioned note). Since you have changed the listener, the parameter might still be wrong.
In case local_listener is correcly set you should give the command
ALTER SYSTEM REGISTER;
a try.
Best Regards,
Michael

My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china. But I can not use it in the USA, so could you mind help me to solve that problem. I think someone of you must help me to

My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
But I can not use it in the USA, so could you mind help me to solve that problem.
I think someone of you must help me to solve this problem !
Details:
SN:F2*****FDR
<Edited by Host>

See the response in your other thread:
https://discussions.apple.com/message/24641427#24641427

HT4993 My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china. But I can not use it in the USA, so could you mind help me to solve that problem. I think someone of you must help

My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
But I can not use it in the USA, so could you mind help me to solve that problem.
I think someone of you must help me to solve this problem !
Details:
<Edited by Host>

xinyi93 wrote:
My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
But I can not use it in the USA, so could you mind help me to solve that problem.
Yes, the iPhone 5S is a global phone. However, Sprint will only unlock phones for use on GSM networks outside of the U.S. In the U.S., that phone can only be used on Sprint's network.

ýesterday my iphone 5c screen suddendly shows connect to itune and i try to restore it using itune but halfway i got a message error occured (14). please help me in solving this problem.

ýesterday my iphone 5c screen suddendly shows connect to itune and i try to restore it using itune but halfway i got a message error occured (14). please help me in solving this problem.

what did you learn when you search the internet for iPhone error 14?

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004 Please help me in solving this problem.

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004
Please help me in solving this problem.

Make sure Java is enable in your browser's security settings.
Open Java Preferences (in Utilities folder)
Make sure Web-start applications are enabled.
Drag Java 32-bit to the top of the list.
jnlp isn't an audio file format. It's just a java web-start program (Java Network Launching Protocol).

An error encounter on test devise (real devise) i.e "apple mach -o linker error linker command failed with exit code 1", please any body help me to solve the problem

Hello, I am using tesseract api in my app, which run perfectly on simulator but on test devise (real devise) it is showing an error i.e "apple mach -o linker error linker command failed with exit code 1", please any body help me to solve the problem

if you can't compile the webutil.pll in your forms developer you need to set the forms_builder_classpath in you windows registry. You have to add the frmwebutil.jar,jacob.jar to the registry key. The configuration files you mention are for running the forms.

We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...

We have 'CS6' version of Adobe. We are facing a problem with 'Acrobat Pro'. Every month that is stop working and everytime need to install. Kindly help us regarding solving this problem...

Your Acrobat is running in Trial Mode. Try this KB: Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
If it doesn't work you need to contact Adobe Support for assistance.

My iphone 3gs is upgraded to ios 6.1.3 from ios 5.0.1 then it continues to shutting down then turning on i think that ios 6 is cannot carry by my iphone help me to solve this problem tnx

my iphone 3gs is upgraded to ios 6.1.3 from ios 5.0.1 then it continues to shutting down then turning on i think that ios 6 is cannot carry by my iphone help me to solve this problem tnx

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Pay particular attention to Steps 3 and 4.
When prompted... Choose Restore as New ( not from backup.)

Thank you for providing immediate feedback. bt that solution did not help me to solve the problem.still am nt able to make outgoing calls. i dont find any problem in recieving calls also right. bt i dont have any problem in recieving calls.

Thank you for providing immediate feedback. bt that solution did not help me to solve the problem.still am nt able to make outgoing calls. i dont find any problem in recieving calls also right. then i dont what is wrong with my iphone.The same sim which i used in iphone4s is working in all other phones.its not the problm of carrier.
Iphone 4s Black 16gb

Rather than starting a new thread every time it would be easier to follow you if you stick to the one thread

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Help me to solve my problem.

Similar Messages

Maybe you are looking for