Help me update the firmware on my linksys...PLEASE!

okay, i currently have the WRT54G model, and i have to update it to play on xbox live.... i understand how to do all this....and i did, i put in my ip address on the address bar, all that, and a window pops up asking for my password, and my username. WHERE would i find those?! i never remember putting any of that in....and i followed direction and left username blank and put in admin, but that didn't work. help please?

yes, no username make sure the use lowercase admin ... if its now working then your only option is to reset the router ... press the reset button on the back of your router and hold it for just 10 seconds...

Similar Messages

  • I am using an iphone 3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.

    HEY GUYS I AM USING AN IPHONE  3g and when i connect my device to my laptop a dialog box appears saying that an update of 4.2 is available so went for it.after the firmware is downloaded via itunes it shows that the firmware is invalid!.please help.
    AND ALSO I HAVE HEARD THAT THE IPHONE 3G CANNOT BE UPDATED TO IOS 4.2!IS IT TRUE???
    PLEASE HELP ME.

    This means that the phone you have was software unlocked to use on any carrier, or hacked. When you installed the update it restored the lock that originaly came with your phone. Not much you can do now. Apple will not support hacked phones. You will need to find out the carrier your phone is locked to and see if they offer official unlocking, or start googling to see if you can find a way to unlock 4.2.

  • Need help - Error while updating the firmware of Muvo Slim using the recovery t

    Hi ,
    While I am trying to update my Muvo slim firmware using the recovery tool it throwd up an error. And from then onwards if I am trying to power it up it won't.
    If I again try to update the firmware, it throws up the error that "Unable to Write to Device: Device Time out".
    I am afraid that my Muvo slim got bricked. Can you please help me in recovering the same.
    PS: My PC OS is Windows XP.
    Thank & Regards
    ksraghava?

    On my XP system, the last time I wanted to reload the firmware, I had to remove all of my Creative software programs,?and then revert my Windows Media Player back to 0 and then use The Recovery Tool. It is a bit of a pain, but does seem to work when you are getting errors with the firmware download.
    luvmyrescuedogs
    Almost forgot. Make sure your player is fully charged or has a fresh battery before starting any firmware download.
    Message Edited by luvmyrescuedogs on 06-4-2008 :6 AM

  • How can I update the firmware all at once

    I'm a tech support in a school, approximately our school has over 500 laptops, how can I update the firmware on all laptops at once?

    Apple Configurator is the software you want - and it's free from Apple. However, I'm dubious that firmware can be updated all at once.
    http://help.apple.com/configurator/mac/1.4.1/

  • Error while updating the firmware

    I have X4500 running solaris 10 OS with software version 5.10. The ILOM version is 1.1.1. I tried to update the firmware but I cannot do that because I am getting an error. This is how I setup everything and I get the error mentioned below.
    C H A P T E R 1 - Flash Upgrading Your Server to Software Release 1.2
    I referred to the above link to do so. But, I do not understand what is the tftpserver that I need to mention here. I get an error message saying gethostbyname() failed. I also setup tftp server on my solaris machine using the following link.
    A P P E N D I X C - Updating the Firmware
    Please, help me.

    ILOM <1.1.8 was pretty flaky. 1.0 was described to me by a Sun CSE as the worst piece of software they ever released. I beg to differ, having been forced to use YP and rpc.lockd in the past but I digress ...
    o) Are you sure that you're getting the right firmware image? You want the x4500-specific images here: http://www.sun.com/servers/x64/x4500/downloads.jsp Be careful not to mix up x4100/x4200, x4100m2/x4200m2, x4600, x4500, etc. files as they are different
    o) Do a "show /SYS/MB" before updating your firmware and stash the output. Updates from 1.x versions of ILOM have a way of wiping the system serial and part numbers. If you record that info first you can repair after the fact.
    o) Do a "reset /SP" to reset the service processor before attempting the update. 1.x versions of ILOM, especially <=1.1.1, seem to upgrade more reliably when they're freshly booted
    o) Be sure that /SYS is stopped before you update ILOM
    o) You don't specify what command you're using to try to update, but I suspect that you're trying something like
    load -source tftp://some.host.domain/file.ima
    given the gethostbyname error. Give it the ip address of the tftp server not the FQDN.

  • IMac G3 won't boot after updating the firmware and upgrading the OS!

    Hi! Everyone,
    I have an iMac G3 333MHz (five flavors) which comes with 192MB of RAM and 6GB of hard drive. Originally, it was OS 8.5.1 installed, later upgraded to OS 9.2.2. Of course, the firmware has been updated by the appropriate method provided by the on-screen instructions before the installation of 9.2.2. After successfully updating the firmware and installing Mac OS 9.2.2, the system booted up and worked fine. However, after shutting it down and powering it up a few days later, I have encountered a critical problem:
    1. At first, the iMac would chime and displayed a smiley-mac finder face.
    2. No question mark appeared and the system halted because it stayed at the same screen for about 5 minutes! Also, the keyboard wouldn't respond. For instance, the LED signal light wouldn't light on when Caps Lock was pressed.
    3. I assumed that this is just a typical crash and rebooted the machine via the "reset" button on the right side of the machine.
    4. After restarting, well, no luck, the same condition. Therefore, I rebooted it again by using the method mentioned above.
    5. The condition of sticking at the smiley-mac finder face occurred again! However, this time the iMac wouldn't chime and just displayed the mac face.
    6. Another restart, well, it was getting worse... no chime and no smiley-mac finder face but a white screen.
    7. I was frustrated then and shut the machine down forcefully by rebooting it again and pressing on the power bottom quickly before the screen appears. Also, I unplugged the power cord.
    ---------- After a few hours later ----------
    8. Okay, I then plugged the power cord in and booted it up again, this time, it would chime but stuck at the white screen. => No smiley-mac finder face appeared!
    9. Rebooted it again, the result was as same as step 8.
    10. Another restart, the smiley-mac face finally appeared but still... stuck here and this time, no chime.
    11. I then shut the machine forcefully by using the method mentioned above and let the machine rest for about a day with the power cord unplugged.
    ---------- After resting for a day ----------
    12. I booted it up and it would chime, but no screen (the power button was orange, not green). I then forcefully shut down the machine.
    13. Waited for about a minute and powered it up. This time, I tried to clear the PRAM, but no chime and gave me a white screen. => No luck! As mentioned, the keyboard's LED signal light wouldn't light on even though the Caps Lock key has been pressed.
    *Note: The keyboard has been tested on the other computers and it worked. Also, I tried different USB ports to plug the keyboard in. => The USB ports were all in working condition， as I can know from the last successful start up.
    14. Forcefully shut the machine down and tried to enter the Open firmware, no luck. It didn't enter and gave my a white screen.
    15. Conclusion:
    1) After resting for a while, the iMac would chime.
    2) Rebooting too much times would cause the machine not to chime and leaded the screen to become white instead of the smiley-mac finder face.
    3) However, rebooted the machine when the screen became white, the smiley-mac finder face would appear again without chime.
    By the way, I could hear the hard disk spinning up so that means the hard disk is working.
    Can anyone help me solve this problem? Is it related to the firmware update? Any suggestions will be appreciated! Thanks!
    Andy

    OK, I will try replacing the PRAM battery. Also, the PowerMac G3 and the other iMac 233MHz had the dead batteries. They are still working though... Should I replace them along with the iMac 333MHz? In case of not replacing, will they malfunction in future times? There are some symptoms on this two machines: 1. iMac 233MHz - No chime and no sound when adjusting system volume (the bi sound is not available), but iTunes and other applications can still use the audio device and output the sound via internal speakers; 2. PowerMac G3 450MHz - Will chime but sometimes hard to boot: 1) Chime but no screen; 2) No respond after pressing the power button => the power signal light won't light on. Every time I experienced this, I would open its case, pressing a small button (not quite understand what it does... anyway, just works if system halted.) near the PRAM battery and wait for about a minute, then close the case, and it boots. However, I have to reset "Date & Time"...

  • I updated the firmware to 5.0.1, then began a problem with my gadget I try to restore from a backup firmware, Itunes an error 3194, if I can, and if I do get to shsh ios 5?

    I updated the firmware to 5.0.1, then began a problem with my gadget I try to restore from a backup firmware, Itunes an error 3194, if I can, and if I do get to shsh ios 5?

    Good morning
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3125
    Hope this helps
    Cheres

  • Updating the firmware of a DVR-112D

    I have been searching the discussions here and in other places trying to find a way to update the firmware that my DVR-112D uses...eventhough I am running Lion.
    The actual Firmware that my original drive has is BC-14 / MMC-3 and I have read that there are ways to update the drive....but I wonder if anyone here can help me to solve this issue...
    thanks

    Hello mooblie....thanks for your kind answer but the fact of the matter is that doing it using a pc is a no go for me. I don't have one, and even more, doing the procedure in a pc requires first to get the driver out of the mac and then with the internal drive (which is without an external enclosure) somehow open, trying to connect it to the pc....it is both risky and it's a lot of work.
    Wile searching for answers that could be implemented for the Mac, well, I even found the recipe as to hows athis can be achieved via Terminal. So as you can see, que purpose of posting this topic here has been hoping that maybe within mac there was another way of accomplishing the task without soo much strugle.
    Cheers

  • Updating the firmware Router WRT-54G ver2

    Good morning guys!
    Im trying to update the firmware of my router WRT-54G Ver 2. But when I selection the version of my hardware, the FW file is this one:
    WRT54G_v4.21.1_fw.zip
    Is it the right file? Im scared cuz my hardware is ver 2, and this v4.21.1 looks like for a v4 version... Can any1 help me?
    Thx
    Solved!
    Go to Solution.

    Thx guys
    I'll flash it now

  • Updating the firmware on my 9500

    does anyone know how to update the firmware on the 9500 commincators? i do know that nokia uk does it over the air, but not with this unit. the version i have currently is 4.44. as i am in the US, is there another, newer version that is available to download or be sent to my phone without sending my phone oversees? and if it is, will it bring it to the current version of 5.22 that is on my US version 9500?
    thanks for your help.
    -chris

    http://discussions.europe.nokia.com/discussions/board/message?board.id=swupdate&message.id=3243
    N95 v 21.0.016 14-02-08 RM-159 (03.01).
    N93 v 20.0.058. 21-10-06 RM-55 D211 card-phone
    -Android Hero :-)

  • Help after updating the OS to 4.3.3 none of the 3rd party app work

    Help after updating the OS to 4.3.3 none of the 3rd party apps work at all they just flash up on the screen and then die.

    install a free app (or any other app) from the app store, then the problem will be fixed.

  • My 160 classic wil not update the firmware 1.0.1  ?

    hi al my 160 classic wil not update the firmware 1.0.1 what do do rong also after sync not al my covers ar on my ipod

    Hi hrcpinfreak,
    What exactly happens when you try updating your iPod's firmware? If you're getting an error message while syncing your iPod, then please quote what that precisely says.
    You could try these five iPod steps, as a start:
    The Five Rs
    But we won't really be able to give you specific instructions unless we know some more details, so please let me know what's going on!
    -Kylene

  • Updating the firmware of an older airport extreme

    I have an early version of the Airport extreme and, probably 1st gen airport express.  Is there anyway to update the firmware on these devices so that they have the most recent firmware versions available to those devices. The only identifying info on them is their model numbers.
    On the express it is Model# A1084 and on the Extreme it is Model # A 1034.  I realize that these are older units and don't expect much from them, just would like to be able to do it.

    The most recent firmware update for both devices that you mention was 8+ years ago, so you likely already have the most up to date firmware that the devices can handle.
    5.7 would be the latest firmware for the AirPort Extreme and 6.3 would be the latest for the Express.
    AirPort Extreme Firmware Update 5.7 for Mac OS X - Support - Apple
    AirPort Express Firmware Update 6.3 for Mac OS X - Support - Apple

  • Updating the Firmware?

    Can this be done on a Mac yet?
    Or is it still a pc only option.. As i'd love to update my external pioneer drive firmware.. Come to think of it, i'd love to update the internal one too.. But Matshita never seem to update the firmware :o(
    Regards
    Chipster

    Well if that was the case.. I would of had one by now.. The only time Apple updates the firmware for the superdrive.. If a problem occured.. The firmware updates corrects new types of media and so on.. or new types of dyes used in different media.. Something that shouldn't really concern Apple
    But Superdrive makers.. It should concern them.. But they aint interested one bit.. Thats why when you contact them, you never get a reply.. But if you had a Pioneer Drive they are most aware that having the most up to date firmware is important, to both their drives that the users of their drives
    Regards
    Chipster

  • Hi anyone. Can I buy an SD card reader for my old Powerbook G4, OSX, 10.4.11 and it's only USB. I've never needed one previously but I now need to update the firmware on my camera. Can I get one, if so which one's best? Many thanks.

    Hi anyone.
    Can I buy an SD card reader for my old Powerbook G4, OSX, 10.4.11 and it's only USB.
    I've never needed one previously but I now need to update the firmware on my camera.
    Can I get one, if so which one's best? Many thanks.

    Hello,
    If it is a PowerBook G4 with a PC Card slot, you have two possibilities. You could buy a USB card reader for SD, or a PC Card adapter (such as SanDisk's 6-in-1adapter). Please note that you are or may be limited to plain SD (that is, not SDHC) unless otherwise noted. For a USB reader, make sure that it has Mac support. BTW, is an SD card absolutely necessary for the firmware update; is there not a way of updating via cable? If you post back with the camera model, someone may be able to provide additional information.
    Jan

Maybe you are looking for