Help me with GSOD and kernel panic on 24" imac!

im sorry if this is the wrong place for this.
also sorry if the answers to my questions are somewhere on this board.
However, i have looked all over the internet and everywhere and found no solution.
it seems simple enough.. here goes!
one day, computer freezes, i get a msg saying please restart your computer blah blah in the middle of the screen
looked like this from memory
http://i44.tinypic.com/2n1gvf4.jpg
then it wouldnt turn on at all.
a few days later it turned on, power on, but didnt load up.
just the grey screen with the apple and the spinning wheel.
i dont know what version os i was running but it must be something 10.5 something?
i went out and purchased snowleopard as i dont have any of my original cd's
hoping it cud help me install a new os.
put the cd in but it didnt run, tried pressing c after turn on but wudnt boot from cd drive.
and the cd wont eject either.
please help me! i need my computer back for uni asap!
Message was edited by: wonkaa

HI,
Go here for help to Resolving Kernel Panics
To eject the disc, try starting up while holding down the mouse. If that doesn't help, startup while holding down the Eject key ⏏
Try starting up while holding down the Option key which should prompt the Startup Manager window. Select MacintosHD 10.x.x
Carolyn

Similar Messages

  • Will the USB debug kit help me with the USB kernel panic?

    Hi.
    Some time ago I posted a question regarding USB trouble and got the answer that I have a 'kernel panic' (Thanks for that!). I did not do anything about it, I just did not use Memory Sticks etc. Now I want to try and solve the problem, because I hate it when things does not work.
    I searched for 'kernel panic' to learn more, but I must admit that I did not understand much of it
    Apple has something called 'mac OSX USB debug kit'. Can that solve the problem? Is it safe to run?
    Any help will be greatly appreciated!
    Regards, Littaol
    iMac G4 Flat screen   Mac OS X (10.3.9)  

    Hello again Littaol,
    After a brief read of this page, I would not start messing with developer tools, scripts, programs and "kits", before having explored every other "human" solutions.
    Firstly, I would simply try again to use my Memory Sticks.
    Perhaps this model was not yet handled properly, but now causes no problem after you updated Mac OS X or after you installed a Security Update.
    Secondly, do you have other problems with your USB ports?
    Keyboard, mouse, printer, etc, all is going well?
    Kernel Panics:
    Yes, they are caused by a problem, not always but often a hardware problem.
    Sometimes though, they come for "no reason" and never show up again.
    However, they have almost completely disappeared now from our Mac OS X users' lives, or?
    If they occur only one or two times a year, there's nothing to worry about.
    Let us know.
    Hopefully this first answer will wake some good ideas from one of the many helpful and knowledgeable members of these Discussions!
    Axl

  • Mac freezing and kernel panics

    Please help if anyone can. I'm not much of a computer expert.
    I apologize in advance if I'm not asking this question in the right forum or topic- I haven't ever posted before today.
    I have a PowerMac G5 dual 2 GHz processor machine running 10.4.9. Lately I have had problems with freezing and kernel panics, especially at startup or soon after startup.
    I have 1 GB RAM, 150 GB hard drive with 117 GB free space. I have no peripheral devices hooked to my computer- just an Apple USB mouse and keyboard that came with my computer.
    Panics occur at startup usually, and require a restart using the power button.
    Sometimes the system profiler shows that I have only 1 CPU.
    I've run all the Apple hardware diagnostic stuff, Disk Utility, Disk Warrior, etc, and it comes up clean- no problems. I've run fsck -fy, and I've done a full erase and reinstall, then update to 10.4.9. Problem persists.
    Sometimes I don't get the startup sound, and then everything freezes.
    Sometimes it freezes on the blue screen and shows the prohibitory sign.
    Sometimes when it freezes, the fans go wild and just keep increasing in speed until I force restart.
    Recent kernel panic log reads as follows:
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000070000200 PC=0x000000000003FE3C
    Latest crash info for cpu 0:
    Exception state (sv=0x303BE280)
    PC=0x0003FE3C; MSR=0x00009030; DAR=0x70000200; DSISR=0x00200000; LR=0x0003FE24; R1=0x17903470; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x020B9E40 0x0002BC34 0x002FE1CC 0x002FE3E4 0x002D64D4 0x002D5DD0
    0x00502ED0 0x00500E00 0x004FFE98 0x0010916C 0x000D601C 0x000FE6C4 0x000DBF0C 0x000DC74C
    0x0022D248 0x000FDEE0 0x002A5F94 0x00089D0C 0x00061340 0x00063258 0x000A84F0 0x000AB980
    backtrace terminated - frame not mapped or invalid: 0xF0080DE0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.iokit.IOStorageFamily(1.5)@0x4ee000
    Proceeding back via exception chain:
    Exception state (sv=0x303BE280)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x2FA43C80)
    PC=0x00044398; MSR=0x4000F030; DAR=0x01597000; DSISR=0x40000000; LR=0x0001670C; R1=0xF0080DE0; XCP=0x00000010 (0x400 - Inst access)
    Kernel version:
    Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
    Proceeding back via exception chain:
    Exception state (sv=0x303BE280)
    PC=0x0003FE3C; MSR=0x00009030; DAR=0x70000200; DSISR=0x00200000; LR=0x0003FE24; R1=0x17903470; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x020B9E40 0x0002BC34 0x002FE1CC 0x002FE3E4 0x002D64D4 0x002D5DD0
    0x00502ED0 0x00500E00 0x004FFE98 0x0010916C 0x000D601C 0x000FE6C4 0x000DBF0C 0x000DC74C
    0x0022D248 0x000FDEE0 0x002A5F94 0x00089D0C 0x00061340 0x00063258 0x000A84F0 0x000AB980
    backtrace terminated - frame not mapped or invalid: 0xF0080DE0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.iokit.IOStorageFamily(1.5)@0x4ee000
    Exception state (sv=0x2FA43C80)
    PC=0x00044398; MSR=0x4000F030; DAR=0x01597000; DSISR=0x40000000; LR=0x0001670C; R1=0xF0080DE0; XCP=0x00000010 (0x400 - Inst access)
    Kernel version:
    Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
    Model: PowerMac7,3, BootROM 5.1.8f7, 2 processors, PowerPC G5 (2.2), 2 GHz, 1 GB
    Graphics: GeForce FX 5200, GeForce FX 5200, AGP, 64 MB
    Memory Module: DIMM0/J11, 512 MB, DDR SDRAM, PC3200U-30330
    Memory Module: DIMM1/J12, 512 MB, DDR SDRAM, PC3200U-30330
    Modem: Jump, V.92, Version 1.0
    Network Service: Built-in Ethernet, Ethernet, en0
    Serial ATA Device: ST3160023AS, 149.05 GB
    Parallel ATA Device: PIONEER DVD-RW DVR-107D
    USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
    USB Device: Apple Optical USB Mouse, Logitech, Up to 1.5 Mb/sec, 100 mA
    USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
    USB Device: Hub, Up to 12 Mb/sec, 500 mA
    USB Device: Studio Display, Up to 1.5 Mb/sec, 500 mA
    I don't know enough to be able to interpret this.
    Can anyone help.
    Thank you very much.
    PowerMac G5   Mac OS X (10.4.9)  

    Based on that info, it sounds like either the optical or hard drive is beginning to go bad and perhaps the CPU on the logicboard. The fact it mentions iostorage, that typically deals with the storage devices on the computer. The fact that the CPU disappears is not good. Backup your data and try to replace the hard drive. See my FAQ* on backing up:
    http://www.macmaps.com/backup.html
    A G5 takes SATA hard drives, and won't work with the Parallel ATA drives. SATA drives take the connectors shown here:
    http://en.wikipedia.org/wiki/Serial_ATA
    The drive may still be under warranty even if the computer is not. Look on the sticky label on the outside of the drive.
    * Links to my pages may give me compensation.

  • Gratuitous kernel panic on my iMac G3 running Tiger. How can I prevent this

    Ok, I know I probably shouldn't have installed Tiger on my G3 iMac so you don't need to remind me. However, it runs pretty good and I hardly ever even see the beachball spinning when I ask it to do something. What I am shocked, shocked by is the ridiculous amount of frequency that I end up with a kernel panic that gives me the 'gray screen' telling me I have to restart my Mac. I have been able to keep this down to a minimum by pointedly only running programs and commands one at a time with a good sized pause in between but even with that I am diappointed with how often it happens. Call me a heretic, but I think it would have killed Apple to stick with their classic OS framework rather than go to UNIX. I would like some tips about things I could do to minimize this occurence above what I already do. It really ***** to have had to reinstall Tiger about 3 or 4 times since I upgraded and have to change up the screen position, dock, desktop, mouse, screen saver, and reinstall all my programs after my iMac has croaked and finally accepted another reload of Tiger.

    I'll ignore the major portion of your post which comes across as a rant and try to stick with the title: "kernel panic on my iMac G3 running Tiger. How can I prevent this?"
    Kernel panics are usually caused by bad or marginal RAM or RAM that isn't seated properly, or by buggy or damaged software or drivers. In the past, problems with marginal RAM for Macs has shown up when people upgraded to new versions of the OS -- which might fit your situation.
    Although your CPU is slow, you have lots of RAM, so Tiger should run OK, if the RAM is not defective. You don't mention how much free space you have on your hard drive. Typically you're going to need at least 5 Gig free to give Tiger breathing room.
    Running a system maintenance utility like Yasu would probably also be beneficial:
    http://jimmitchell.org/projects/yasu/
    What does the hardware test for your Mac say about your system? This might help us determine if there is a hardware cause for the kernel panics.

  • Known issues with CUDA 5.0.17 and 5.0.24 driver (including crashes and kernel panics) on Mac OSX

    We have recently learned of some issues with the new CUDA drivers from Nvidia that cause crashes and kernel panics in some circumstances, including when switching between applications that use the GPU.
    See this page for details.

    You are experiencing a page fault (reference to an area outside of what is owned by the software in question) in the AirPort driver, in a Mac OS X kernel that does not have obvious third-party modifications to it.
    This should not be happening. Your Mac OS X image may be Bad.
    If you do not already have a Trusted Backup, that should be your Top Priority.
    If this is a new MacBook, and it is within the first 90 days of ownership, contact telephone support and ask them to help you. They will likely suggest a re-Install, right over the Mac OS X you have in place now. This is intended to do no damage, but you should always have a Backup.

  • Known issues with CUDA 5.0.17 driver (including crashes and kernel panics) on Mac OSX

    We have recently learned of some issues with the new CUDA drivers from Nvidia that cause crashes and kernel panics in some circumstances, including when switching between applications that use the GPU.
    See this page for details.

    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
    If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

  • Help!!!  Brand new MBP with Santa Rosa Kernel Panics when started with...

    Help!!! Brand new MBP with Santa Rosa Kernel Panics when started with external HD firewire 800 after 20 sec...
    I don't know what it could be???
    Do you???
    Thanx
    Jay

    I'm actually having a similar issue and I don't think its related to networking at all.
    I'm currently working in a corporate environment where we deploy pre-built OS X images to machines. I recently upgraded my images to 10.4.10 before we got our first Santa Rosa machine. This image was built on a MacPro and worked on all Intel Macs down to a MacMini CoreSolo. When I deployed my prebuilt image to the SR MBP, it caused a kernel panic immediately.
    Further investigation revealed previous builds of OS X, including 10.4.10 upgraded from any other model Intel Mac will kernel panic the SR MBP. Going backwards the SR Build of OSX will not work on any previous model Mac, as any other build typically does, but causes severe graphical distortion, as if it does not have the display drivers for the other Macs.
    To make a long story short, I think your issue comes from the fact that your external hard drive has an older build of OS X 10.4 than the SR MBP will run (even though you may have upgraded it to 10.4.10). Anyone who can corroborate my story with some more testing, please chime in.
    I haven't found a solution for this issue yet other than keeping a seperate Santa Rosa Core 2 Duo image for my deployments.

  • Panic.log and Kernel Panic issues

    Can anyone help me out with deciphering this kernel panic log. I've had about 4 KP's in the last couple months. I only have one in my log because I think that is the only one I have had since I did an erase and install. I checked it in for repair at an Apple Store where they ran a high load test on it and found no hardware problems nor could they determine the source of the KP's.
    I have plently of disk space and a third party graphics card bought and installed at the Apple Store. The computer was used in a professional creative environment every day, 10 hours a day for a year and a half and was rarely shut down overnight. It was pushed pretty hard, was kept in an area that allowed for dust accumulation and the area below the desk where it was kept had pretty poor air flow. It was probably moved around a bit while running. All a recipe for disaster, but I figure it's better to be up front about it's condition before one were to help me out.
    Beside the couple KP's I've had, it will occasionally hang up while switching into a different user while using "Fast User Switching". Aside from distinguishing what this log might mean, I am also curious to what degree a KP can have on further corruption of data. Data corruption concerns me more than the occasional KP that would force me to revert to my last save.
    Here is the log file. Any help you can give would be appreciated.
    -Tim
    --------begin of panic.log-----------
    Sat Jul 21 14:38:32 2007
    Unresolved kernel trap(cpu 1): 0x300 - Data access DAR=0x0000000000000008 PC=0x000000000053FB4C
    Latest crash info for cpu 1:
    Exception state (sv=0x5F6BA500)
    PC=0x0053FB4C; MSR=0x00009030; DAR=0x00000008; DSISR=0x42000000; LR=0x0053FD60; R1=0x459DB900; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0053FBF4 0x0053F9E0 0x00551658 0x0052EBC4 0x0052DE08 0x005532DC
    0x0053FA90 0x0055190C 0x002D3B50 0x0003C884 0x000A9514
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.iokit.IOFireWireFamily(2.2.5)@0x527000
    Proceeding back via exception chain:
    Exception state (sv=0x5F6BA500)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x5FC55000)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.10.0: Wed May 23 16:50:59 PDT 2007; root:xnu-792.21.3~1/RELEASE_PPC
    panic(cpu 1 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 1:
    Backtrace:
    0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
    Proceeding back via exception chain:
    Exception state (sv=0x5F6BA500)
    PC=0x0053FB4C; MSR=0x00009030; DAR=0x00000008; DSISR=0x42000000; LR=0x0053FD60; R1=0x459DB900; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x0053FBF4 0x0053F9E0 0x00551658 0x0052EBC4 0x0052DE08 0x005532DC
    0x0053FA90 0x0055190C 0x002D3B50 0x0003C884 0x000A9514
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.iokit.IOFireWireFamily(2.2.5)@0x527000
    Exception state (sv=0x5FC55000)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 8.10.0: Wed May 23 16:50:59 PDT 2007; root:xnu-792.21.3~1/RELEASE_PPC
    --------end of panic.log-----------

    Since it references com.apple.iokit.IOFireWireFamily, I suspect that some FW device is causing the panic. Disconnect all of them and see if that stops the problem. As for general KP stuff, start with http://www.thexlab.com/faqs/kernelpanics.html

  • Programs Quitting (without errors) and kernel panics!

    I think my iBook is dying! I recently switched over to a G4 iBook, 1.42Ghz with 1.5GB RAM. I am running 10.4.9 and keep it consistently updated.
    Starting two nights ago, Safari, Mail, and Roxio's Toast have all quit instantly, out of the blue, with no error message popping up. At some points, I click on the icon in the dock, it bounces, then it stops and never opens. Sometimes it opens for .5 seconds and then closes again. Sometimes it opens just fine!
    On top of that, I had a kernel panic this afternoon as well. I am afraid of this being on its last legs!!! Any help? Here is the kernel panic info:
    panic(cpu 0 caller 0x0021C8F4): btreejournal_modify_blockend: about to write corrupt node!
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000952D8 0x000957F0 0x00026898 0x0021C8F4 0x0021CA9C 0x002431EC 0x00244C04 0x00241BAC
    0x0021F148 0x0023B72C 0x0023AE4C 0x000FC92C 0x000EE3FC 0x002AB7F8 0x000ABB30 0x00000000
    Proceeding back via exception chain:
    Exception state (sv=0x38D07500)
    PC=0x9001B7CC; MSR=0x0200F930; DAR=0xE02F5000; DSISR=0x42000000; LR=0x0000E9B4; R1=0xBFFFE790; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPCModel: PowerBook6,7, BootROM 4.9.3f0, 1 processors, PowerPC G4 (1.2), 1.42 GHz, 1.5 GB
    Graphics: ATI Mobility Radeon 9550, ATY,M12, AGP, 32 MB
    Memory Module: DIMM0/BUILT-IN, 512 MB, built-in, built-in
    Memory Module: DIMM1/J7, 1 GB, DDR SDRAM, PC2700U-25330
    AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
    Modem: Jump, V.92, Version 1.0
    Bluetooth: Version 1.7.14f14, 2 service, 1 devices, 2 incoming serial ports
    Network Service: AirPort, AirPort, en1
    PCI Card: pci106b,4318, sppci_othernetwork, SLOT-B
    Parallel ATA Device: MATSHITADVD-R UJ-845E
    Parallel ATA Device: FUJITSU MHV2060AT, 55.89 GB
    USB Device: OneTouch II, Maxtor, Up to 480 Mb/sec, 500 mA
    USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
    USB Device: Apple Internal Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
    USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
    USB Device: Apple Optical USB Mouse, Mitsumi Electric, Up to 1.5 Mb/sec, 100 mA
    USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
    HELP! I would love to go buy a MacBook now, but I can't afford it quite yet.

    Thanks John!
    I am having the original install discs sent my way - I am a current college student so I did not have them with me! (Go figure!)
    I will definitely attempt this.
    I have now, however, found one more thing that is wrong. My audio is not working! When I go to change the volume, the speaker icon comes up, does nt change the level and also now has a new circle with a line through, indicating there is no audio? I checked the Audio settings in System Prefs and it is showing there as being no Audio Output. Again...HELP!
    Thank you again, John, for being kind and helpful!

  • CrashPlan and Kernel Panics

    Ever since I updated to 10.7.4 I have been having problems with CrashPlan 3.2 and kernel panics. I use CrashPlan on a MacMini 3,1 w/ 2 GHz Core 2 Duo processor and 8 GB of memory. I have several external drives that contain a large collection of photos and home movies connected to the system. There is also a large external disk that I use as a local CrashPlan backup of other computers on my home lan. The system serves mostly as a backup and file server. There are a total of over 1 million files and over 1.3 TB of data that is backed up from this computer.
    After the 10.7.4 upgrade I started getting regular kernel panics when the system was running only CrashPlan. The crash report usually indicated that java was the active process, pointing to CrashPlan as the culprit. To verify that 10.7.4 was the culprit I did clean installs of 10.7.3 and 10.7.4 on an external disk, installed CrashPlan on each of them, and alternately booted from them. I was able to run 10.7.3 for long periods of time (days/months) without crashes while 10.7.4 resulted in a crash, usually within an hour of enabling CrashPlan but never more than a day or so. The crashes seemed to correspond to CrashPlan having high levels of activity. I verified the file systems of all the external drives. In August I finally got around to updating to ML, and by then 10.8.1 was out. I did a clean install on an external drive, installed CrashPlan, crossed my fingers, and, to my disappointement, ..., crashes continued. It may just be my imagination, but I would say if anything the crashes happened sooner.
    I had a several month running discussion with CrashPlan support, which by the way was very responsive and gave good suggestions. I tried many things including 32 bit Java instead of 64 bit. All of this was to no avail until this past week. It was suggested that I increase the limit on the memory. Instructions fro doing this are to edit /Library/LaunchDaemons/com.crashplan.engine.plist (need root permissions to do this), search for the line that contains -Xmx512m and increase 512 to something larger. It was suggested that I start with 1024, but since I have a lot of memory on the system I used 2048. Of course CrashPlan has to be stopped and restarted for this to take effect.
    Perhaps I am being premature in writing this post, but the backup has been running for over 12 hours and seems to be working fine. I noticed that the java process is using 870 MB of real and 1 GB of virtual memory. So, this could explain why CrashPlan had trouble when it was limited to 512 MB of memory. I do not know why this was not a problem under 10.7.3. I did notice under 10.7.3 that CrashPlan reported using 650 MB of real memory for the same backup set. So, for some reason it uses more under 10.8.1. It may also be that 10.7.4 and 10.8.1 have stronger memory protection, but I am not sure. I am posting this information in the hopes that it will benefit someone else having similar problems.

    Start with http://docs.info.apple.com/article.html?artnum=106417
    AFAICTL, these are the fonts that should be in /System/Library/Fonts/:
    Apple LiGothic Medium.dfont
    AppleGothic.dfont
    AquaKanaBold.otf
    AquaKanaRegular.otf
    Courier.dfont
    fonts.cache-1
    Geeza Pro Bold.ttf
    Geeza Pro.ttf
    Geneva.dfont
    Hei.dfont
    HelveLTMM
    Helvetica LT MM
    Helvetica.dfont
    Keyboard.dfont
    LastResort.dfont
    LucidaGrande.dfont
    Monaco.dfont
    Osaka.dfont
    OsakaMono.dfont
    Symbol.dfont
    Times LT MM
    Times.dfont
    TimesLTMM
    ZapfDingbats.dfont
    ヒラギノ丸ゴ Pro W4.otf
    ヒラギノ明朝 Pro W3.otf
    ヒラギノ明朝 Pro W6.otf
    ヒラギノ角ゴ Pro W3.otf
    ヒラギノ角ゴ Pro W6.otf
    ヒラギノ角ゴ Std W8.otf
    儷黑 Pro.ttf
    华文细黑.ttf
    华文黑体.ttf

  • Hard Feezing and Kernel Panics - Early 11 MBP

    Hey just wondering if anyone has any insight into this...
    I've been experiencing hard freezing and kernel panics on my Early 11 Macbook Pro for several months.  The hard freezing only happens when I wake up my system from sleep.  I'll open the lid and when it happens, within seconds, everything locks up.  No spinning wheel, just frozen machine and I have to do a hard reboot.  I also get random kernel panics as well.
    I took it in the the Genius Bar a few weeks ago, they ran tests and said the hardware was all fine and that I should reinstall Lion after a clean format.  Well I did that and still having issues.  Not sure if it's being caused by a 3rd party app...or if I really do have bad hardware after all.
    When they did a diagnostic they said that 'soundflower' was showing up in my kernel panic log and that I should find what that is and delete it, so I did.  In my most recent and only kernel panic, shown below, I don't see any 3rd party language anywhere.
    Anyone have an idea of what might be causing this?
    Interval Since Last Panic Report:  534787 sec
    Panics Since Last Report:          1
    Tue Jul 24 00:30:37 2012
    panic(cpu 4 caller 0xffffff80002c473a): Kernel trap at 0xffffff7f816eb67c, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0xffffff83a69dd370, CR3: 0x0000000040436042, CR4: 0x00000000000606e0
    RAX: 0x0000000080000000, RBX: 0x00000000cccccccc, RCX: 0x00000000cccccccc, RDX: 0x00000000cccccccc
    RSP: 0xffffff807f363860, RBP: 0xffffff807f363880, RSI: 0xffffff80736aa040, RDI: 0xffffff800be74600
    R8:  0x0000000000000000, R9:  0x0000000000000000, R10: 0xffffff7f8191dd70, R11: 0x0000000000000002
    R12: 0x000000000000000f, R13: 0xffffff800be74600, R14: 0xffffff80736aa040, R15: 0xffffff800be74600
    RFL: 0x0000000000010206, RIP: 0xffffff7f816eb67c, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0xffffff83a69dd370, Error code: 0x0000000000000002, Faulting CPU: 0x4
    Backtrace (CPU 4), Frame : Return Address
    0xffffff807f363510 : 0xffffff8000220792
    0xffffff807f363590 : 0xffffff80002c473a
    0xffffff807f363740 : 0xffffff80002da0cd
    0xffffff807f363760 : 0xffffff7f816eb67c
    0xffffff807f363880 : 0xffffff7f816ec061
    0xffffff807f3638d0 : 0xffffff7f816f76d3
    0xffffff807f3638f0 : 0xffffff7f816f7b2c
    0xffffff807f363910 : 0xffffff7f816d53c4
    0xffffff807f363960 : 0xffffff7f816d6852
    0xffffff807f3639b0 : 0xffffff7f816d3f2c
    0xffffff807f363a00 : 0xffffff7f81695829
    0xffffff807f363a40 : 0xffffff7f816d7d85
    0xffffff807f363a90 : 0xffffff7f81698d64
    0xffffff807f363b60 : 0xffffff7f81695ecb
    0xffffff807f363bc0 : 0xffffff800065501e
    0xffffff807f363be0 : 0xffffff80006558fa
    0xffffff807f363c40 : 0xffffff800065609b
    0xffffff807f363d80 : 0xffffff80002a3f08
    0xffffff807f363e80 : 0xffffff8000223096
    0xffffff807f363eb0 : 0xffffff80002148a9
    0xffffff807f363f10 : 0xffffff800021bbd8
    0xffffff807f363f70 : 0xffffff80002aef20
    0xffffff807f363fb0 : 0xffffff80002daa33
          Kernel Extensions in backtrace:
             com.apple.ATIRadeonX3000(7.1.8)[BB62D2AF-725C-3D33-8009-C51F397EBB72]@0xffffff7 f8168c000->0xffffff7f81926fff
                dependency: com.apple.iokit.IOPCIFamily(2.6.8)[06C77CAA-586C-3AA7-94B7-A544F470025E]@0xffff ff7f80858000
                dependency: com.apple.iokit.IONDRVSupport(2.3.2)[D05CFB53-FB72-3613-8162-2D188DB04738]@0xff ffff7f80cff000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[2D2A4A31-EB4F-3730-BE3A-76C061685FC5]@0 xffffff7f80cc7000
    BSD process name corresponding to current thread: Twitter
    Mac OS version:
    11E53
    Kernel version:
    Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
    Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
    System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
    System uptime in nanoseconds: 1401075635774
    last loaded kext at 162719058388: com.apple.filesystems.smbfs    1.7.2 (addr 0xffffff7f80791000, size 241664)
    last unloaded kext at 99396494277: com.apple.driver.AppleUSBUHCI    4.4.5 (addr 0xffffff7f80ad6000, size 65536)
    loaded kexts:
    com.apple.filesystems.smbfs    1.7.2
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AppleMikeyHIDDriver    122
    com.apple.driver.AudioAUUC    1.59
    com.apple.driver.AppleUpstreamUserClient    3.5.9
    com.apple.driver.AppleMCCSControl    1.0.26
    com.apple.driver.AppleHDA    2.2.0f3
    com.apple.driver.AppleMikeyDriver    2.2.0f3
    com.apple.driver.AppleIntelHD3000Graphics    7.1.8
    com.apple.driver.AGPM    100.12.42
    com.apple.kext.ATIFramebuffer    7.1.8
    com.apple.driver.SMCMotionSensor    3.0.2d6
    com.apple.driver.AppleSMCPDRC    5.0.0d0
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager    4.0.5f11
    com.apple.driver.AppleSMCLMU    2.0.1d2
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AudioIPCDriver    1.2.2
    com.apple.driver.AppleMuxControl    3.0.16
    com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d0
    com.apple.ATIRadeonX3000    7.1.8
    com.apple.driver.AppleLPC    1.5.8
    com.apple.filesystems.autofs    3.0
    com.apple.driver.AppleUSBTCButtons    225.2
    com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.5f11
    com.apple.driver.AppleUSBTCKeyboard    225.2
    com.apple.driver.AppleIRController    312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    33
    com.apple.iokit.SCSITaskUserClient    3.2.0
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCISerialATAPI    2.0.3
    com.apple.iokit.IOAHCIBlockStorage    2.0.3
    com.apple.driver.AppleUSBHub    4.5.0
    com.apple.driver.AppleSmartBatteryManager    161.0.0
    com.apple.driver.AppleFWOHCI    4.8.9
    com.apple.driver.AirPort.Brcm4331    530.4.20
    com.apple.driver.AppleSDXC    1.2.0
    com.apple.iokit.AppleBCM5701Ethernet    3.1.2b2
    com.apple.driver.AppleEFINVRAM    1.5.0
    com.apple.driver.AppleAHCIPort    2.3.0
    com.apple.driver.AppleUSBEHCI    4.5.8
    com.apple.driver.AppleACPIButtons    1.5
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.6
    com.apple.driver.AppleSMBIOS    1.8
    com.apple.driver.AppleACPIEC    1.5
    com.apple.driver.AppleAPIC    1.5
    com.apple.driver.AppleIntelCPUPowerManagementClient    193.0.0
    com.apple.nke.applicationfirewall    3.2.30
    com.apple.security.quarantine    1.3
    com.apple.driver.AppleIntelCPUPowerManagement    193.0.0
    com.apple.driver.DspFuncLib    2.2.0f3
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.iokit.IOSurface    80.0.2
    com.apple.iokit.IOSerialFamily    10.0.5
    com.apple.iokit.IOFireWireIP    2.2.4
    com.apple.iokit.IOAudioFamily    1.8.6fc17
    com.apple.kext.OSvKernDSPLib    1.3
    com.apple.driver.AppleHDAController    2.2.0f3
    com.apple.iokit.IOHDAFamily    2.2.0f3
    com.apple.driver.ApplePolicyControl    3.0.16
    com.apple.driver.AppleGraphicsControl    3.0.16
    com.apple.driver.AppleSMC    3.1.3d8
    com.apple.driver.IOPlatformPluginLegacy    5.0.0d0
    com.apple.driver.AppleSMBusPCI    1.0.10d0
    com.apple.driver.AppleBacklightExpert    1.0.3
    com.apple.iokit.IONDRVSupport    2.3.2
    com.apple.driver.IOPlatformPluginFamily    5.1.0d17
    com.apple.kext.ATI6000Controller    7.1.8
    com.apple.kext.ATISupport    7.1.8
    com.apple.kext.triggers    1.0
    com.apple.driver.AppleIntelSNBGraphicsFB    7.1.8
    com.apple.iokit.IOGraphicsFamily    2.3.2
    com.apple.driver.AppleThunderboltDPInAdapter    1.8.2
    com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.2
    com.apple.driver.AppleThunderboltPCIDownAdapter    1.2.4
    com.apple.driver.AppleUSBBluetoothHCIController    4.0.5f11
    com.apple.iokit.IOBluetoothFamily    4.0.5f11
    com.apple.driver.AppleUSBMultitouch    227.1
    com.apple.iokit.IOUSBHIDDriver    4.4.5
    com.apple.driver.AppleUSBMergeNub    4.5.3
    com.apple.driver.AppleUSBComposite    4.5.8
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.0
    com.apple.iokit.IOBDStorageFamily    1.6
    com.apple.iokit.IODVDStorageFamily    1.7
    com.apple.iokit.IOCDStorageFamily    1.7
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.0
    com.apple.driver.AppleThunderboltNHI    1.5.5
    com.apple.iokit.IOThunderboltFamily    2.0.0
    com.apple.iokit.IOUSBUserClient    4.5.8
    com.apple.iokit.IOFireWireFamily    4.4.5
    com.apple.iokit.IO80211Family    420.3
    com.apple.iokit.IOEthernetAVBController    1.0.1b1
    com.apple.iokit.IONetworkingFamily    2.1
    com.apple.iokit.IOAHCIFamily    2.0.8
    com.apple.iokit.IOUSBFamily    4.5.8
    com.apple.driver.AppleEFIRuntime    1.5.0
    com.apple.iokit.IOHIDFamily    1.7.1
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    177.5
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.DiskImages    331.6
    com.apple.iokit.IOStorageFamily    1.7.1
    com.apple.driver.AppleKeyStore    28.18
    com.apple.driver.AppleACPIPlatform    1.5
    com.apple.iokit.IOPCIFamily    2.6.8
    com.apple.iokit.IOACPIFamily    1.4
    Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 4 GB, SMC 1.69f3
    Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.198.4.20)
    Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0xfa100000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 5
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 7
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3

    BSD process name corresponding to current thread: Twitter
    Try either uninstalling Twitter or just don't use it. See if this stops the kernel panics.
    Clinton

  • I want to transfer pictures from my iphone 4 to a hardrive, but the problem is i dont know how. Can the genius bar help me with that, and can they possibly do this for me if i bring my iphone and hard drive with me there. Also if there is a cost, how much

    I want to transfer pictures from my iphone 4 to a hardrive, but the problem is i dont know how. Can the genius bar help me with that, and can they possibly do this for me if i bring my iphone and hard drive with me there. Also if there is a cost, how much?

    iOS: Importing personal photos and videos from iOS devices to your computer

  • Temp and kernel panic relation?

    Is there a relationship between temperature and kernel panic?
    I've spent the day restarting the computer trying everything I've found at apple discussions and support to fix the nonstop kernel panic restart requests.
    After I Left the thing off for an hour - I gave up after my husband said my ranting caused Ga Tech to lose the Gator Bowl- I was able to get almost through the OS reinstall, which was about step number 45 in my restarts for the day.
    so is this a temp problem? Is this chance or related to the cool down? Cannot wait for tomorrow to talk to someone at apple!

    After you talk to them be sure to post back ...it may very well be related and if so indicates a hardware issue - meaning you may have to send it in for repairs.
    When you mention it's a week old then I'm assuming it's a Core2Duo and not just a refurbished orig. Macbook.

  • Help needed with header and upload onto business catalyst

    Can someone help with a problem over a header please?
    I have inserted a rectangle with a jpeg image in  background, in the 'header' section, underneath the menu. It comes up fine on most pages when previsualised, going right to the side of the screen, but stops just before the edge on certain pages. I have double checked that I have placed it in the right place in relation to the guides on the page.
    That's one problem.
    The second problem is that I tried to upload onto business catalyst, which got to 60% and refused to go any further, saying it couldn't find the header picture, giving the title and then u4833-3.fr.png. The picture is in the right folder I have double checked. And it isn't a png. Does it have to be ?
    And the third problem is that I got an email following my upload from business catalyst in Swedish. I am living in France.
    Can anyone help ? Thanks.

    Thanks for replying,
    How can I check the preview in other browsers before I publish a provisional site with BC?
    The rectangle width issue happens on certain pages but not others. The Welecom page is fine when the menu is active, also the contact page, but others are slightly too narrow. Changing the menu spacing doesn’t help - I was already on uniform but tried changing to regular and back.
    In design mode the rectangle is set to the edge of the browser, that’s 100%browser width right?
    Re BC I have about 200 images on 24 different pages and it seems to be having difficulty uploading some of them. But it has managed a couple I named with spaces but not others I named with just one name.
    Is there an issue on size of pictures ? If I need to replace is there a quick way to rename and relink or do I have to insert the photos all over again?
    I’m a novice with Muse with an ambitious site !
    Thanks for your help.
    Mary Featherstone
    Envoyé depuis Courrier Windows
    De : Sanjit_Das
    Envoyé : vendredi 14 février 2014 22:15
    À : MFeatherstone
    Re: Help needed with header and upload onto business catalyst
    created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion 
    Hi
    Answering the questions :
    - Have you checked the preview in Muse and also in other browsers ?
    - Does the rectangle width issue happens when menu is active , or in any specific state , Try to change the menu with uniform spacing and then check.
    - In design view the rectangle is set to 100% browser width ?
    With publishing :
    - Please try to rename the image file and then relink
    - If it happens with other images as well , see if all the image names includes strange characters or spaces.
    - Try again to publish
    With e-mail from BC :
    - Under preferences , please check the country selected.
    - If you have previously created partner account in BC and selected country and language then it would follow that, please check that.
    Thanks,
    Sanjit
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6121942#6121942
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6121942#6121942
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6121942#6121942. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Pls help me with  Mac and had a trial  serial number problems

    Hi,
    I downloaded first the trial version of Photoshop, after 30 days finished but the icon still remained.
    Now, when purchased a creative suite 4 Designe premium, installed, all programs are fine, just the photoshop not working, asking for serial number but when I type the right numbers, doesn`t accept.
    What can I do? any idea?
    to uninstall the photoshop and install again?
    but if I have the other programs working and installed?

    Hi,thank you, that is fine, just not so quick but I resolved the problem alone.Thanks anyway you helped me.Eva
    Date: Sat, 1 Aug 2009 11:53:58 -0600
    From: [email protected]
    To: [email protected]
    Subject: Pls help me with  Mac and had a trial  serial number problems
    Hello, Eva. For CS4 problems, you need to ask in the Photoshop forum (this is the Photoshop Elements forum). It's here:
    http://forums.adobe.com/community/photoshop/photoshop_macintosh
    Good luck!
    >

Maybe you are looking for