Help me with my activation password and activation server address

hei.. yesterday i tried to wipe my blackberry.. and then all of my data lost.. when I open my setup wizard, then open my email set up, i need activation password and activation server address.. but i don't know what mine.. how is it?
please help me..

Hi hikarisora
Welcome to BlackBerry Support Forums
Before going to email setup , try registrating your device with your wireless sevice provider .For that :
On the Home screen of the BlackBerry smartphone, click Options, or click Settings > Options
For BlackBerry Device Software 4.1 to 5.0, Advanced Options > Host Routing Table >
Press the Menu key and click Register Now
Wait till a Registration messages comes in your message box.
KB00510 How to register a BlackBerry smartphone with the wireless network
After getting the registration message on your device try setup wizard again.
Good Luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

Hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the

hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the help

What I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work

I reset the ipad. hoping it would help. but still it needs password for activation. the owner already forgot password for icloud as well as password of the email since it was not used since 2011. help please.

I reset the ipad. hoping it would help. but still it needs password for activation. the owner already forgot password for icloud as well as password of the email since it was not used since 2011. help please.

Your sister can go to https://iforgot.apple.com/ and see if she can recover her password.
There is nothing anybody else can do.

I've had an Apple ID under an old email address. I have a new Apple ID under my current email. Is there a way to link or merge the two together? I don't remember the old password and that email address is no longer active.

I've had an Apple ID under an old email address. I have a new Apple ID under my current email. Is there a way to link or merge the two together? I don't remember the old password and that email address is no longer active. If I cannot link or merge the two, how can I activate the old ID on the new computer if that email account is no longer active?? Any advice would be great. Thanks in advance!!

You cannot merge accounts.
You need to sign into the old account on your computer.
iTunes Store: Retrieving and changing passwords (Apple ID)

How do I remove an email account from iPhoto on an iMac? I set it up with the incorrect password and can no longer send photos, please help!

"Removing email account from iPhoto"
How do I remove an email account from iPhoto on an iMac? I set it up with the incorrect password and can no longer send photos, please help!

To follow Larry's advice, select your email account in the list of accounts and click the "-" button to remove the account:

How to : Active/Passive and Active/Active Enterprise manager R3 (10.2.0.3)

Soon I will implement the above named version of EMR3 on a AIX 5.3.3 platform. I have a couple of questions about active/passive and active/active implementations. These are the questions I have:
Basic install:
Implementing 10.2.0.2 and upgrading to 10.2.0.3 works fine on host 1234 (already done that).
Does anyone have experience with an implementation on host 1234', in other words, a virtual host (different IP-numbers on the same ethernet adapter)?
Active/passive
Lets assume that the implementation on server 1234' works fine, how can I realise a cold failover situation? On AIX you can move/transport the volume group to the failover server, activate the volume group, mount your filesystems and the application is running again. This is the theory but ....
Active/Active
If this 'basic' install is done, can someone briefly tell me how to migrate the OMS repository to a RAC implementation? Is this possible or do I need to setup the repository for the OMS at the start of the implementation. Has anyone experience with using virtual hostnames, RAC and EMR3.
Can anyone tell me where I can find some good documentation instead of reading all these thousands of pages of Oracle's guides.
Help would be appreciated.
Message was edited by:
Jeroen Udo

Soon I will implement the above named version of EMR3 on a AIX 5.3.3 platform. I have a couple of questions about active/passive and active/active implementations. These are the questions I have:
Basic install:
Implementing 10.2.0.2 and upgrading to 10.2.0.3 works fine on host 1234 (already done that).
Does anyone have experience with an implementation on host 1234', in other words, a virtual host (different IP-numbers on the same ethernet adapter)?
Active/passive
Lets assume that the implementation on server 1234' works fine, how can I realise a cold failover situation? On AIX you can move/transport the volume group to the failover server, activate the volume group, mount your filesystems and the application is running again. This is the theory but ....
Active/Active
If this 'basic' install is done, can someone briefly tell me how to migrate the OMS repository to a RAC implementation? Is this possible or do I need to setup the repository for the OMS at the start of the implementation. Has anyone experience with using virtual hostnames, RAC and EMR3.
Can anyone tell me where I can find some good documentation instead of reading all these thousands of pages of Oracle's guides.
Help would be appreciated.
Message was edited by:
Jeroen Udo

Difference between refresh of Report in Active Viewer and Active Studio BAM

We use the Oracle SOA Suite with BAM (on Linux) 10.3.2.0.
I have 2 questions:
1. We have made a report with several items and in Active Studio --> Select Report --> Edit mode --> I see the correct values for my report. When I open my report in Active Viewer I see data from yesterday. The report is not being refreshed. How can I change this, what is causing this difference between Active Viewer and Active Studio in Edit mode??
2. One of my items in my report always gives the message: opening (only in Active Viewer, in Active Studio/edit mode I can see the correct data).

Is your popup blocker turned off? I can only imaging that the popup blocker may be keeping the Live Data window from appearing and updating the dashboard. Active Studio doesn't do a Live update, but an update on report load.

When am trying to download acrobot standard its prompting with user login password and its not getting downloaded.

Hi
When am trying to download acrobot standard its prompting with user login password and its not getting downloaded.

When you (or someone) first switched on your computer, you (or someone) had to choose a password. This protects your computer, and you need it to install most software or change the system. We can't help you if you forget it, sorry.

Can i use iCloud keychain with my own passwords and not with what is assigned and stored?

Can i use iCloud keychain with my own passwords and not with what is assigned and stored?

tammersalem wrote:) <-HDMI-> (HDTV)
My main concerns are:
-If I use iTunes on my main computer, will it then be available to Apple TV?
-If I use Apple TV to download will it be available to my Main computer?
-Can the Apple TV use a media server for storage over LAN (using NTFS Samab or otherwise)?
Basically iTunes feeds AppleTv with media either syncing (copying to it) or streaming live.
Media must be compatible with AppleTV.
AppleTV requires a proper iTunes instance running - it cannot access a NAS directly.
If you store media in a folder on a NAS and it's part of the computer iTunes library (just stored on the NAS vs internal/external drive), then when running iTunes makes this content available to AppleTV.
Data will travel:
NAS > network > iTunes > network to AppleTV
As the path is potentially slower than internal/external attached drive > iTunes > network > AppleTV, it may or may not work robustly for streaming.
If AppleTv is set to sync (it can also stream in this mode), when you purchase direct on AppleTV, the media should sync back to where the itunes library is stored (via iTunes) to keep things in sync and to allow you to backup the media.
You cannot drag/drop media to/from AppleTv across the network, nor can it directly access storage itself - iTunes is an essential cog in the wheel.
The majority of commercial 'in-built iTunes media servers' will not work directly with AppleTV as it has to be 'paired' with iTunes by entering a numerical code in iTunes and does not simply see 'shared libraries'.

Project Centre - Active Issues and Active Risk columns always show 0

Hello,
We have created a number of Project Centre views to which we have added the "Active Risks" and "Active Issues" columns against projects. No matter how many active issues or risks a project has, these columns are always showing 0 for each
and every project.
The reminders web-part on the PWA home page, and the Issues and Risks page (/PWA/IssuesAndRisks.aspx) correctly show these counts for a user, but Project Centre does not show the values correctly for projects.
We have not changed the values in the "Status" column of either list - they're still the default "(1) Active", "(2) Postponed" and "(3) Closed".
All issues and risks are correctly promoted to the reporting database on publish or when a list item is added/updated/deleted etc.
Our environment was upgraded from Project Server 2010 to Project Server 2013 and we're running service pack 1.
If not now, when?

Hello,
There fields don't actually work, if you want to see the active risks or active issues per projects in a summary row, create a report from the Reporting schema in the Project Web App database.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

When I go to update my apps and it asks me to login with my daughters password and on her phone it ask her for my id

when I go to update my apps, it asks me to login with my daughters password and on her phone it ask her for my id & password .
Well our names pop up and it ask for the password. But when we enter them it wont work. But if an app is downloaded, the
correct name and password shows up. We both have Iphone 6 plus. She downloaded her information on my computer when she
did her first restore. Do we have to restore them all over again?

Go to Settings>iTunes & App Store
Click on the Apple ID that appears and select Sign Out
Regards,
Steve

I forgot the icloud password and the email address to recover it is not working anymore plz help me

i forgot the icloud password and the email address to recover it, is not working anymore plz help me
i want to erase the iphone but i cant without writing the i cloud password

iForgot iCloud Password

Key Board Shortcut for toggling between Activity table and Activity Detail

Is there any keyboard shortcut for toggling between Activity table and activity detail windows. It if frustrating to use mouse while tweaking relationships of activities.

Unfortunately, there are no shortcuts for this. Prior to the Oracle acquisition, Primavera had it as a goal for R7 to allow the operator to keep their hands on the keyboard most of the time, but this feature didn't make it into the final code. I feel your pain!

After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for hel

After I updated user for i phone 4 s iCloud password is no way I can not phone and e-mail address has been blocked. I did not bring the solution to Turkey APPLE chief BILKOM is forgotten the password and e-mail address in the e-mail address asking for help from you I will make the iphone does not open e-mail address associated with it @hotmail.com mail to this address icloud iphone phone's password is forgotten, I want to thank you in advance for your help tell a method of opening up again.
<Email Edited by Host>

Welcome to the Apple Community.
I have asked for your email address to be edited out. Posting your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
If you want people to contact you, enable others to see your email address in your profile.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
Apple Topluluk hoş geldiniz.
Ben düzenlenebilir için e-posta adresi için istedi. Açık bir konu adres gönderme istenmeyen e-posta ile bombardıman bir emin yoludur, bulmak için otomatik algılama yazılımı için, size sorunu giderilmiştir sonra burada uzun olacak unutmayın.
Eğer insanlar sizinle iletişim istiyorsanız, başkalarının profilinizde e-posta adresinizi görmelerini sağlar.
Bu özellik onları çalıntı olduğunu bu işe yaramaz çalıntı telefonları için getirilmiştir.
Ancak aynı zamanda kullanıcı Apple ile Apple ID ayrıntıları değişti ve iCloud hesabı için aynı değişiklik yapmamış ortaya çıkar / iOS 7 yükseltmeden önce cihaz üzerinde My Phone bul olabilir.
Tek çözüm My Apple ID de Apple ile önceki durumuna geri Apple ID değiştirmek için, değişiklikleri doğrulamak cihazınızda talep olarak, şifreyi girin ve sonra kapatın "benim telefon bulmak".
Daha sonra tekrar bugünkü durumuna Apple ID değiştirmek gerekir, bir kez daha doğrulamak cihazınızdan iCloud hesabı silmek ve daha sonra mevcut Apple kimliği kullanarak oturum açın. Son olarak, geri bir kez daha üzerinde "benim telefon bulmak" açın.

I want to change my Apple ID for IPad because forgot password and all email addresses changed so cannot get informations for password reset. What can I do?

I want to change my Apple ID for IPad because forgot password and all email addresses changed so cannot get informations for password reset. What can I do?

I was wondering if you ever figured this out. I have the same issue. When I try to use the support communities, there are so many with the same problems and never seem to be any replys?? Not very helpful and I can not get Apple to return my emails.

Help me with my activation password and activation server address

Similar Messages

Maybe you are looking for