Help me with this error: .cfr appears to be malformed or contain errors.
Hello All,
I am so new in ColdFusion. I'm trying to move one website (coldfusion) to another hosting.
I have a problem in cfr pages. I don't know how do I have to see them?
I couldn't open them in any editor?
Do I have to install any spesefic software in the destination hosting in order to run them?
this is the error that I got :
"some address in the hosting ex: d:/file:report/fff.cfr" .cfr appears to be malformed or contain errors.
If any one can help me, I really appreasiate
thanks you in advansed
bahar
I had this issue with some CFR reports that were developed under CF7 and recently (now using CF9/10) we wanted to change a column heading and doing so resulted in this error.
I made a copy of the file, opened it with Report Builder, ran the Report Wizard which re-styles the report using the in-built styling themes, but then select everything in all the report bands and delete - so now you essentially have a blank report. Then open the original CFR and copy and paste the content of each report band back into the respective bands in the new document and save.
This got the file working for me. I had to tweak a couple of margins and sizes to make it look the same as the original, but I was back up and running in less than 30 minutes.
Hope this helps.
Similar Messages
-
I get "We could not complete your iTunes Store request. An unknown error occurred (4002) Can any person help me with this on, please?
Turning off iTunes Match and Genius and then turning them back on appears to have worked for some people e.g.
https://discussions.apple.com/message/22059685#22059685
https://discussions.apple.com/message/18427550#18427550 -
Can someone help me with this 201435 Error during Signal Express signal generating?
I built this signal generation tast to generate a voltage waveform. The wave form is loaded from a lvm file. (as shown in attachment pic). The waveform can be correctly viewed in preview window, so i suppose nothing wrong with the file. but when i clkick the run button, error 201435 pops up, tell me "no samples provided to DAQmx Write to initialize buffered generation".
i dont know what step do i missed in this task. can anyone help me with this problem?the attachment picture
Attachments:
task.PNG 9 KB -
I cannot install Itunes and Icloud on my Sony Vaio Laptop - Window 7. Error says " computer/system not modified". Please help me with this problem.
Hello there, jag123059.
The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
(The iPhone "Named" cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.)
can anyone help me with this issue, every time i try to restore it will come up like this error message.Restore the iPhone when connected to iTunes by cable.
Still the same TS1275?
Is your iPhone jailbroken?
Or
Has your computer ever been used to jailbrake or downgrade (Tinyumbrella) any iPhone? -
Can anyone please help me with this error: "Apple application support was not found... Error 2"
I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
"Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
Thank youiTunes "Apple Application Support is required... Error 2" and possible fix.
I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
If it helps you please like this so others can find it. -
I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard
Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!? -
Hi, I'm using a white iPhone 4s with 16gb memory and having some problems. Whenever I use earphones the sound will be heated when the volume is at the highest if I turn it down any lower all I hear is static. Can anyone help me with this problem as I would appreciate it much.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset. -
Everything on my macbook air 10.7.5 appears blurred. I tried searching a few things but didnt get any success.
Can anybody please help me with this ?Nothing looks blurred to me on the screen shot you posted. However, I did notice that some of the fonts in the tabs are faded. Which browser are you using? You should post in a browser forum about that and also the blurring that you see.
Since your Finder fonts looks blurry to you, go to System Preferences/Personal/Appearance - play around with the text smoothing setting. If that does not work, play around with the resolution settings - System Preferences/Displays/Display -
Can anyone Help me with this message? We could not complete your itunes store request an uknown error occurred (-1201)?
You have to unplug your ipod and reload the page.
-
I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???
You didn't say what you have already tried, but if you haven't already done so, power-cycle your router (unplug it for 15 seconds then plug it back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, then try joining your wifi again.
-
I downloaded Lightroom CC through the creative cloud where I have a paid plan, everything works except that when I click on it Develop instead of appearing the photo you want to work, appears a blue frame ..like to help me with this problem
thanks a lot Jim..its work ..problem solved
-
the title pretty much has my question i guess. it's my first post so i'm not sur if you'll see all of it. I'll just copy paste it anyhow.
i've bought the first season of Death Note on itunes, and i've was never able to download the 11th episode (Assault), it gives me error -50 each time I try. Can anyone please help me with this?Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
itunes could not connect to the iphone an unknown error occurred 0xE8000003 please help me with this error any one have idea ?
http://support.apple.com/kb/ts3221
-
I am trying to install lightroom on a new computer and am getting error message 2203.database Cannot open database file system error 2147287037. Can anyone help me with this?
This site has some info
Error 2203 | Install | Creative Suite 4, 5, or 5.5 products or updates
Maybe you are looking for
-
Message on 10.9.1 can't login / activate - Can on other computers.
Hi all, I'm having an issue with Messages.app, and Facetime.app (Although I don't use the latter). Messages either completely fails to login, or appears to login but remains inactive. This is on my early 2011 MBP on 10.9.1. I've done some trouble sho
-
Can't bind to color anymore. Solutions?
I'm new to JavaFX and it seems whenever I find example code like what I want to do, the new release has completely destroyed the functionality. Drag/Drop was one thing and now I find I can't bind to the red,blue,green attributes of the Color object.
-
Can anyone provide some guidance or perhaps a working solution to this problem as I need this very urgently: Implement an animation program based on Java 2D which simulates the navigation of a tiled maze by a robot. The maze should be splitted into N
-
This only happens when online using Firefox. And seems to happen more often when transferring a document or picture to my Document file. By the way, I am using Windows XP. I have tried a fix called Script Stop, but the problem persists. Aside from go
-
Scroll up and down through apps (grid view) rather than side to side?
Is there a way to scroll through your apps up and down instead of side by side while in grid view (not list view)?