Help me with this error please. 0xe800065

This error drives me nuts. When i plug in my iphone 4s the error 0xe800065 pops up in the itunes saying it cant connect. My iphone is also in a bad shape because it just updated from ios 6.0.1 to 6.1 without me knowing it. My iphone needs to activate with wifi connection but then it fails every time or connect with itunes but....  Can somebody please help me?

There are troubleshooting steps for 0xE errors here: http://support.apple.com/kb/TS3221.

Similar Messages

  • Please help me with this error: "Apple application support was not found... Error 2"

    Can anyone please help me with this error: "Apple application support was not found... Error 2"
    I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
    "Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
    Thank you

    iTunes "Apple Application Support is required... Error 2" and possible fix.
    I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
    I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
    Problems:
    The initial error during the installation of iTunes was:
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
    The error (after installing iTunes) when trying to run iTunes was:
    Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
    After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
    http://support.microsoft.com/kb/2688946
    This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
    Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    Note: The installation of VC++ rolls back when it fails.
    Solution:
    Through this error I found this MSKB article:
    http://support.microsoft.com/kb/946414
    The Automated MS "Fix It" msi package didn’t work.
    Note: Please backup your registry first (see the above MSKB article for instructions).
    I opened the registry and (as instructed in the MSKB article) deleted the following keys:
    HKEY_LOCAL_MACHINE\COMPONENTS\
    PendingXmlIdentifier
    NextQueueEntryIndex
    AdvancedInstallersNeedResolving
    Reboot and reinstall iTunes.
    If it helps you please like this so others can find it.

  • TS1424 I get "We could not complete your iTunes Store request. An unknown error occurred (4002)  Can any person help me with this on, please?

    I get "We could not complete your iTunes Store request. An unknown error occurred (4002)  Can any person help me with this on, please?

    Turning off iTunes Match and Genius and then turning them back on appears to have worked for some people e.g.
    https://discussions.apple.com/message/22059685#22059685
    https://discussions.apple.com/message/18427550#18427550

  • Itunes could not connect to the iphone an unknown error occurred 0xE8000003 please help me with this error any one have idea ?

    itunes could not connect to the iphone an unknown error occurred 0xE8000003 please help me with this error any one have idea ?

    http://support.apple.com/kb/ts3221

  • Please help me with this error I keep getting for attachments

    please help me with my error message as I can't download attachments

    Some information would be helpful...  operating system, email client, Reader version, error message, ...

  • Hey guy can you please help me with this issue PLEASE!

    Hey Apple can you please help me with this issue, i have a iPhone 3gs and when i put my sim card into the iPhone it makes iphone 3gs shut down suddenly how do i fix that?
    iPhone version: 6.0.1
    service provider: Vodafone nz

    You could restarting your phone that sometimes fixes issues
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).

  • Please help me with this error message on my lost Crashed Thread:  1  Dispatch queue: NSOperationQueue Serial Queue  Exception Type:  EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000

    I was organizing my contatcs when suddenly it disappeared and got this error message.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Please help me with this error i see when i open firefox on my android phone after installation !

    after i install any version of firefox on my htc chacha (android 2.3),when i open firefox,in some versions of firefox i get this error: "the application firefox (process org.mozilla.firefox) has stopped unexpectedly.please try again."
    and when i try again i get the same error again and again
    in some other versions i get this error: " this device does not meet the minimum system requirements for firefox"
    btw i can not install any program from android market so i have to download files through my pc and install them on my phone

    The reason why your phone will not install Firefox from Market is because it has a older ARMv6 cpu when ARMv7 is required.
    The good news is that Mozilla is looking to try and have ARMv6 builds of mobile Firefox releases in future. Your phone looks to have reasonable specs to run it then.
    Another option is to try the third-party builds from http://forum.xda-developers.com/showthread.php?p=25855563

  • Please help me with this error message

    when I try to restore/update my iPod I get this error message:
    "There was a problem downloading the iPod software for the iPod "_______". You do not have enough access priviledges for this operation.
    Make sure your network settings are correct and your netwrok conection is active, or try again later."

    when I try to restore/update my iPod I get this error message:
    "There was a problem downloading the iPod software for the iPod "_______". You do not have enough access priviledges for this operation.
    Make sure your network settings are correct and your netwrok conection is active, or try again later."

  • HELP Needed with this error:   Exception in thread "main" java.lang.NoClass

    Folks,
    I am having a problem connecting to my MSDE SQL 2000 DB on a WindowsXP pro. environment. I am learning Java and writing a small test prgm to connect the the database. The code compiles ok, but when I try to execute it i keep getting this error:
    "Exception in thread "main" java.lang.NoClassDefFoundError: Test1"
    I am using the Microsoft jdbc driver and my CLASSPATH is setup correctly, I've also noticed that several people have complained about this error, but have not seen any solutions....can someone help ?
    Here is the one of the test programs that I am using:
    import java.sql.*;
    * Microsoft SQL Server JDBC test program
    public class Test1 {
    public Test1() throws Exception {
    // Get connection
    DriverManager.registerDriver(new
    com.microsoft.jdbc.sqlserver.SQLServerDriver());
    Connection connection = DriverManager.getConnection(
    "jdbc:microsoft:sqlserver://LAPTOP01:1433","sa","sqladmin");
    if (connection != null) {
    System.out.println();
    System.out.println("Successfully connected");
    System.out.println();
    // Meta data
    DatabaseMetaData meta = connection.getMetaData();
    System.out.println("\nDriver Information");
    System.out.println("Driver Name: "
    + meta.getDriverName());
    System.out.println("Driver Version: "
    + meta.getDriverVersion());
    System.out.println("\nDatabase Information ");
    System.out.println("Database Name: "
    + meta.getDatabaseProductName());
    System.out.println("Database Version: "+
    meta.getDatabaseProductVersion());
    } // Test
    public static void main (String args[]) throws Exception {
    Test1 test = new Test1();

    I want to say that there was nothing wrong
    with my classpath config., I am still not sure why
    that didn't work, there is what I did to resolved
    this issue.You can say that all you like but if you are getting NoClassDefFound errors, that's because the class associated with the error is not in your classpath.
    (For future reference: you will find it easier to solve problems if you assume that the problem is your fault, instead of trying to blame something else. It almost always is your fault -- at least that's been my experience.)
    1. I had to set my DB connection protocol to TCP/IP
    (this was not the default), this was done by running
    the
    file "svrnetcn.exe" and then in the SQL Server Network
    Utility window, enable TCP/IP and set the port to
    1433.Irrelevant to the classpath problem.
    2. I then copied all three of the Microsoft JDBC
    driver files to the ..\jre\lib\ext dir of my jdk
    installed dir.The classpath always includes all jar files in this directory. That's why doing that fixed your problem. My bet is that you didn't have the jar file containing the driver in your classpath before, you just had the directory containing that jar file.
    3. Updated my OS path to located these files
    and....BINGO! (that simple)Unnecessary for solving classpath problems.
    4. Took a crash course on JDBC & basic Java and now I
    have created my database, all tables, scripts,
    stored procedures and can read/write and do all kinds
    of neat stuff.All's well that ends well. After a few months you'll wonder what all the fuss was about.

  • Can someone help me with this Error ?

    When I start up my Thinkpad 600E it shows 301 on the first screen and then it goes to the diagnostic/Test screen.
    I run a test on the system board and it comes up with this :
    FRU 0086
                 22
             0010
    I know that there is some issue with the Harddisk. The trackpoint is broke so I have disabled and use an external mouse.
    When I do the keyboard test, the key for F8 keeps blinking (even without pressing it). Could this be an issue ? Is there a work around like disabling the keyboard and using an external one ?
    Or could it be because of the hard disk ?
    Pls help
    Thanks
    Alex

    Is your datacontrol being called? I'd pad it with logs and see if maybe that's throwing an exception and causing a jsf error stack to be generated.

  • Can anyone help me with this error?

    http://prntscr.com/5uou9e
    Getting this error trying to use an intro template. Help?

    Layer 4, 3, and 6 have expressions that are not written correctly. If you select those layers and press the U key twice to reveal all properties, then expand the expressions so we can read them maybe we can figure out the error and help you correct it. The error is telling you that the first line is the problem so the first line is probably pointing to something with the wrong name. Without the details of the expressions it's impossible to tell what's wrong.

  • Help needed with this tutorial please

    Hello in this InsertUpdateDelete tutorial at:
    http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/index.jsp
    or
    http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/inserts_updates_deletes.html
    and in this paragraph:
    Changing the Column Components
    and this statement
    In the Visual Designer, select the top Drop Down List component in the Table.
    "It's pretty confusing because there isn't a Drop Down List component in the Table as far as i can tell. There is a Drop Down List on the canvas up above this data table, but that has already been bound in a previous process, here is that previous proces:"
    Configuring the Drop Down List
    Select the Drop Down List in the Visual Designer and, in the Properties window, change its General > id property to personDD.
    Right-click the personDD Drop Down List in the Visual Designer and choose Bind to Data from the pop-up menu. The Bind to Data dialog box appears.........
    Can anyone tell me where i can get help with this tutorial or where i can download the finished program so i can sync up with what is actually being referenced in the questional statement that i mentioned above please?
    Thanks very much!
    BobK

    In Step 5 of "Changing the Column Components" you change the Trip Type column to a drop-down list.
    5. Select TRIP.TRIPTYPEID from the Selected list and make the following changes:
    * Change the Header text field from TRIPTYPEID to Trip Type.
    * Using the drop-down list, change the Component Type from Static Text to Drop Down List.
    6. Click OK to enforce your changes and dismiss the window. If the table columns are too wide after performing the above steps, you can resize them by selecting the first component in each column and dragging its selection handles.
    7. In the Visual Designer, select the top Drop Down List component in the Table. Right-click and choose Bind to Data from the pop-up menu. The Bind to Data dialog box opens.

  • Help me with this error: .cfr appears to be malformed or contain errors.

    Hello All,
    I am so new in ColdFusion. I'm trying to move one website (coldfusion) to another hosting.
    I have a problem in cfr pages. I don't know how do I have to see them?
    I couldn't open them in any editor?
    Do I have to install any spesefic software in the destination hosting in order to run them?
    this is the error that I got :
    "some address in the hosting ex: d:/file:report/fff.cfr"  .cfr appears to be malformed or contain errors.
    If any one can help me, I really appreasiate
    thanks you in advansed
    bahar

    I had this issue with some CFR reports that were developed under CF7 and recently (now using CF9/10) we wanted to change a column heading and doing so resulted in this error.
    I made a copy of the file, opened it with Report Builder, ran the Report Wizard which re-styles the report using the in-built styling themes, but then select everything in all the report bands and delete - so now you essentially have a blank report. Then open the original CFR and copy and paste the content of each report band back into the respective bands in the new document and save.
    This got the file working for me. I had to tweak a couple of margins and sizes to make it look the same as the original, but I was back up and running in less than 30 minutes.
    Hope this helps.

  • Help me with this error msg, crash!

    Premiere crashed on me today, twice in fact when I tried to make a specific edit.
    Any help?

    Can you please provide more details on your system and the steps you took that lead to this error message. Please refer to this page for guidance.
    http://forums.adobe.com/message/4200840#4200840
    Best,
    Peter Garaway
    Adobe
    Premiere Pro

Maybe you are looking for