Help me with this spastic problem on my 5610

I have not used a nokia phone for the past 5 years.
Recently I got a Nokia 5610 becasue I need something small for work and can use it for music.
But I have this irritating problem - If I store a contact (let's say 91234567 under the name Spastic) without the +65 prefix, the sms will not show the associated name. IE, the sms will show its from +6591234567 and not Spastic.
However, if I store the number as +6591234567, the sms will show the associatd contact name. But when 91234567 calls me, the phone will just show 91234567 and not the name
Its driving me nuts. Help!!
How do I get the phone to display the name in both sms and call display?
Thanks

I bet you have to live with that. The problem is, that your provider is sending you the Caller ID in a different way then the sender of text messages (as you might know +65 is the international code). One thing you could try is calling your provider.
Sometimes the solution is closer than you think... sometimes farther

Similar Messages

Could Anybody help me with this Mail problem? (Screenshot attached)

Hello dudes,
Is there anychance anyone could help me out with this slight problem? Everytime i try to take my accounts online i get 'Connection Failed' This only started happening yesterday and i just can't seem to get it fixed.
Thank you!
Jamie Wright

Hi Linc,
I have tried doing that with no luck, I just tried receiving mail through another account on my system and for some reason that seems to be fine. It looks like it is just my Admin account that cannot receive mail.
Anything you could help me with?
Thank you.

Please help me with this strange problem again!

Hi gurus,
I can't, for the life of me, figure out why this does not work in a procedure but works in an anonimous block.
The XML is like this (part of it),
<CaseNotification messageProducedDateTime="2005-07-20T13:58:11-05:00" xmlns="http://www.courts.state.mn.us/CourtXML/2.0.0">
               <NotificationAdminHeader caseNumberKey="87CR0569" xmlns="http://www.courts.state.mn.us/CourtXML/2.0.0">
                    <CaseCountyIdentifier>87</CaseCountyIdentifier>
                    <CaseLocationText>Yellow Medicine County</CaseLocationText>
                    <BaseCaseTypeText>Adult</BaseCaseTypeText>
                    <CaseCategoryText>Criminal</CaseCategoryText>
                    <PartyIdentifier partyKey="854">
                         <PartyCaseAssociationText>Jurisdiction</PartyCaseAssociationText>
                    </PartyIdentifier>
                    <PartyIdentifier partyKey="123637">
                         <PartyCaseAssociationText>Defendant</PartyCaseAssociationText>
                    </PartyIdentifier>
               </NotificationAdminHeader>
               <InterimConditionsNotification>
                    <TriggeredDateTime>2005-07-20T13:57:53-05:00</TriggeredDateTime>
                    <NotificationEvent>InterimConditionsDeleted</NotificationEvent>
                    <InterimConditionsOrder orderEventKey="1760110">
                         <OrderDate>2005-07-20</OrderDate>
                         <OrderedBy judgeKey="00001J">
                              <JudgeName>
                                   <PersonGivenName>John</PersonGivenName>
                                   <PersonMiddleName>P.</PersonMiddleName>
                                   <PersonSurName>Smith</PersonSurName>
                                   <PersonFullName>Smith, John P.</PersonFullName>
                              </JudgeName>
                              <JudicialAgencyIdentifier>MN011015J</JudicialAgencyIdentifier>
                         </OrderedBy>
                         <CourtCaseNumber documentVersion="1" effectiveDateTime="2005-06-06T00:00:00-06:00">
                              <MNCISCaseNumber>
                                   <CountyNumber>87</CountyNumber>
                                   <CaseType>CR</CaseType>
                                   <YearFiled>05</YearFiled>
                                   <SequenceNumber>69</SequenceNumber>
                              </MNCISCaseNumber>
                              <CaseNumberIdentifier caseNumberKey="87CR0569">87-CR-05-69</CaseNumberIdentifier>
                         </CourtCaseNumber>
                         <ConditionSubject>
                              <Party partyKey="123637" currentNameIndicator="true">
                                   <StandardName>
                                        <PersonGivenName>Clanry</PersonGivenName>
                                        <PersonSurName>Ogavitz</PersonSurName>
                                        <PersonFullName>Ogavitz, Clanry</PersonFullName>
                                   </StandardName>
                                   <PartyCaseAssociationText>Defendant</PartyCaseAssociationText>
                              </Party>
                         </ConditionSubject>
                         <InterimConditions>
                              <InterimConditionText>Anger management</InterimConditionText>
                              <InterimConditionAmount>0</InterimConditionAmount>
                         </InterimConditions>
                         <InterimConditions>
                              <InterimConditionText>Attend AA (Alcoholics Anonymous)</InterimConditionText>
                              <InterimConditionAmount>5000</InterimConditionAmount>
                         </InterimConditions>
                    </InterimConditionsOrder>
               </InterimConditionsNotification>
          </CaseNotification>
The code is basically the same except that in the procedure the passing clause gets a differnt param, which is the passed in param from the procedure.
xmltable
                         xmlnamespaces
                         ---     'http://schemas.xmlsoap.org/soap/envelope/' as "saop",
                              'http://www.courts.state.mn.us/CourtXML/2.0.0' as "ic"
                         'for $ics in //ic:CaseNotification/ic:InterimConditionsNotification/ic:InterimConditionsOrder[@orderEventKey = $val/oeKey]/ic:InterimConditions
                         return
                         <ic:ICS>
                              <ic:ICSText>{$ics/ic:InterimConditionText}</ic:ICSText>
                              <ic:ICSAmount>{$ics/ic:InterimConditionAmount}</ic:ICSAmount>
                         </ic:ICS>'
                         passing p_XMLDoc, xmlelement("oeKey", v_OEKey) as "val"
                         columns
                         ICSText          varchar2(100)      path '/ic:ICS/ic:ICSText',
                         ICSAmount     number           path '/ic:ICS/ic:ICSAmount'
The strange thing is the procedure gets the ic:ICSText with the namespace value, which is http://www.courts.state.mn.us/CourtXML/2.0.0, so the finaly result is
the whole thing: <InterimConditionText xmlns="http://www.courts.state.mn.us/CourtXML/2.0.0">Anger management</InterimConditionText>.
I get the correct values when testing with the anonimous code!
What did I do wrong? Please help!
Thank you.
Ben

Hi gurus,
OK, I did another test. I ran the same PL/SQL anonymous block that gets the correct element value in 10.2.0.3.0 and it gets the same wrong value: the element name plus the namespace value and the data itself. It gets the correct element value in 10.2.0.1.0 (my local database).
Could anyone help me with this?
Thanks!
Ben

Someone please help me with this sync problem

Ok here we go. I have had my laptop for a little over two years. Ever since i got my iphone 4 last summer it has been such a pain. I have backed up my phone and synced it multiple times on my computer. Every so often though i plug my iphone into the computer and it recognizes it in itunes but asks me to either set as new iphone or restore from back up. I have tried to restore from back up and it says that the back up has failed even though there is obviously a back up on the computer. I have set as new and it works fine for a day or two and then i got to resync and same problem. I have completly unistalled itunes and all its files and redownloaded it and it worked for a week or so and then same problem. I have also had my computer reset to factory settings (for an unrelated issue) and it worked the first time but then stopped working. I have tried everything i can imagine and am at the end of my rope with this phone. im so ready to call it quits and get something different cause this is so frustrating.

How do you do what? Plug the iPhone into a USB port directly on your computer, or disconnect other USB devices? To disconnect a USB device unplug it from the computer. If it is a disk drive eject it first using the Eject icon in the System Tray. To plug the iPhone into a USB port directly on the computer insert the USB end of the sync cable into a USB port on the computer.
If you are using all of the ports on your computer get a hub and plug low power devices into the hub (e.g., keyboard, mouse). Or get a hub with its own power supply and plug your high power devices (disk drives, DVD drive) into it.

Pls help me with this installation problem. Your advice is highly needed.

I am installing oracle 11.1.6.0 on windows xp professional everything was going fine untill there was a pop up that reads below
INFO: exit-tool: Launch browser
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 1
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat /orahome c:\app\doN H\home /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile c:\app\doN H\home\network\install\netca_typ.rsp
Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat has failed
Execution Error : 'c:\app\doN' is not recognized as an internal or external command,
operable program or batch file.
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to c:\app\doN H\home
Configuration directory is set to c:\app\doN H\home\cfgtoollogs. All xml files under the directory will be processed
INFO: The "c:\app\doN H\home\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is C:\app\doN H\home\oui\bin\runConfig.bat ORACLE_HOME=C:\app\doN H\home MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home C:\app\doN H\home we use the runConfig Command instead of the plugin's command
INFO: Created a new file C:\app\doN H\home\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\app\doN H\home\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\app\doN H\home\cfgtoollogs\configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat /orahome c:\app\doN H\home /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile c:\app\doN H\home\network\install\netca_typ.rsp
Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat has failed
Execution Error : 'c:\app\doN' is not recognized as an internal or external command,
operable program or batch file.
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to c:\app\doN H\home
Configuration directory is set to c:\app\doN H\home\cfgtoollogs. All xml files under the directory will be processed
INFO: The "c:\app\doN H\home\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is C:\app\doN H\home\oui\bin\runConfig.bat ORACLE_HOME=C:\app\doN H\home MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home C:\app\doN H\home we use the runConfig Command instead of the plugin's command
INFO: Since the option is to overwrite the existing C:\app\doN H\home\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\app\doN H\home\cfgtoollogs\configToolFailedCommands.bak.1
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: No
1...The Netmgr and the ODCA was not properly configured and they are not opening on the windows enviroment.
2...The sqlplus, whenever called up, aooears and disappears in 1 second
3...I can not connet to the database. Says adapter error
4...Will 1 start the listner before i can connect and how?
Ur contribution is highly needed. TNX

I am installing oracle 11g on windows xp, everything installed suceessfully except the enterprise control. the error reads
Jan 14, 2011 5:32:30 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:32:40 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:32:51 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:01 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:11 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:21 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:31 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:41 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at G:\app\doN_H\cfgtoollogs\dbca\orcl1\emConfig.log for more details.
Jan 14, 2011 5:33:41 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:869)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:250)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:213)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:235)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
at java.lang.Thread.run(Thread.java:595)
Jan 14, 2011 5:33:41 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\app\doN_H\product\11.1.0\db_1\oui
It also told me that i can configure it later by running G:\app\doN_H\product\11.1.0\db_1\BIN\emca.script
Pls help me. I appreciate ur help so far.

Please please please help me with this bizarre problem!!!

Hi there,
I am not an expert on web design and I am also not a complete newbie. I have built web designs before - and used frames and done it all on dreamweaver - however my target frames aren't working on this website and I'm not sure why???
I have two frames on my index page - one left and one right - the left is the menu and the right is the content of which ever button is selected from the menu in the left frame. However the targets don't work - when clicking on the buttons (links) it makes a new window pop up.
I have named the frames and saved the frame set as index.html.
The coding says for the shop button:
<td><a href="Shop.html" target="_right" onmouseover="MM_swapImage('Image4','','Images/Shop Button RO.jpg',1)" onmouseout="MM_swapImgRestore()"><img src="Images/Shop Button.jpg" name="Image4" width="163" height="56" border="0" id="Image4" /></a></td>
I have tried renaming the frames - tried a different computer - tried just about everything I can think of - it has always worked for me before but since building this site it doesn't! Have I missed something????
Please please help me - it's been driving me up the wall for 2 weeks!!!
Thanks in advance for yourhelp.
Pink
xxx

I haven't used frames since the late 1990s, so can't be of much help :-)
Here's a tutorial that may help:
http://www.dwfaq.com/tutorials/Frames/framesets1.asp
Page 4 shows how to link pages correctly
Is there a specific reason why you are still using frames... they are very old hat and hardly used anymore these days :-)
Here's the reason why frames are evil:
http://apptools.com/rants/framesevil.php
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Please help me with this mac problem

I bought a mac pro without any applications installer (iPhoto, iMovie etc.) Is it really like that? Or there should be one? Btw, i bought OS X v10.

deggie wrote:
Did you purchase this computer from an authorized Apple dealer (or Apple Store) new or did you buy it from an individual?
Yeah that is my question also.
If bought Used from a Private person then you need to Register it with Apple on the Apple Website.
You should also check that it is a Late 2011 model as if it is an early 2011 model it may of originally came with Snow Leopard Pre-Installed and that means that is should not of been sold with Lion installed. As if it is a early 2011 model that did come with SL installed then Lion is regisrted to the original buyer of Lion and not to the serial # of that Mac.

Please Help me with this flash problem, my life is depending on this!

If you visit www.fishtv.tv there is a flash document on the
left side, it is a box with pictures scrolling. I NEED to know how
what to open it with, and how to add a picture into it. Please if
you have any information how to accomplish this task reply to this
thread, OR send me an email at [email protected] It will be
very much appreciated, thanks.

SWF is to FLA the same way JPG is to PSD. SWF is the compiled
(think flattened) format. Like urami
once said, you can't get the egg back after making the
omelette. There are SWF decompilers (search
google or this forum) out there but most will (if not all)
will merely allow you to obtain the
"guts" of an swf - you will not really end up with the
original FLA again. MUCH easier to try and
locate the FLA or rebuild the site. Surely there's a back-up
of the source somewhere?
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
willager wrote:
> i have the swf file, and i open it in flash and it shows
the final product, I dont know how to get it back to its orginal
file.

Please help me with this ipad problem

it like some kind of ios error it like it turned in to ipod,iphone ios
and i cant restore when i try it said an error occured 3194 or 1601 or 1600
and i try to restore in my ipad it didnt finish yet it is in progress for 1 day now!!!!!!
and my device is jailbreak but i didnt use installous i only use it for like winterboard and gravipad or barrel i buy all the app
PLEASE PLEASE HELP ME!!!!!!!!!!

I'm not good at English (i am thai) and what is op mean and yes you are right this is my other account.
Next time I will do better แบบทำเนี่ยนเนี่ยนอะไอ้เฟยเรามาขอให้ช่วยอแปไรเราก็ซื้อเองหมดอยากสนับสนุน apple ไม่เคยไช้เลยไอ้app cake ไรนั่นเราใช้แต่โปรแกรมเสริมเช่นwinter board barrel folder lock ไรเงี้ยเพราะ apple ไม่สามารถทำได

Pleas help me with this printing problem

Hey
I have an application that add pages to a serten class, that holds up to 4 pages per obj.
this class is printable and it is the obj of this class that i add to a book.
this book i then print out to the printer.
All things is working fine, the positioning, printing 1-4 pages on one paper and so on.
but the problem is when a page is bigger then the are, then it will only print that area that fitts on a paper.
Say we whant to print 4 pages on one paper, one of the pages that we add is containing so much information that it need not only one page but several. The problem is that the program will only print out the first area that fits into the page are, after this page have been printed, it goes on to the 3 other pages on the sam paper.
am i doing any wrong? do i have to keep track of this thing my self, i mean do i have to theck the size of the page and then add it to so many pages in the book that it requaries, or shold the printer self manage this?
I am not using any standard printing option where you chose page nrs and so on. Maby this is the problem?
//Jimmy

Read the API documentation section java.print.Printable
int the printing method you can get the maximum prontable area if you draw something outsite the area it will not be printed.

Help me with this messaging problem

I was using a SIM card of Airtel. i recently switched to Vodafone but the problem is that every 3rd or 4th message now goes undelivered. The Vodafone SIM works fine on other phones and the Airtel runs fine on mine. But i want to use the Vodafone on mine . What to DO?

if your sim card is older perhaps it would not be a bad idea to get a new one from your provider.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Can anybody help me with this quiz problem?

Hi everybody,
I'm newer on Presenter, but I can tell you that I've understood very well how to use it.
Well, I've finished my presentation on Power Point, created all quizzes and questions.
After I record the audio, the quizzes have problems. The answers didn't appear, the button labels also.
It's very strange because, before to record the audio, I've tested the presentation publishing on HTML5 and SWF and all quizzes were fine.
See the image:
I've tried many things: deleted all questions, cleared the temp files and also created new questions and nothing solved this problem.
It occurs in a preview mode and publishing in HTML5 and SWF too.
What's happening?
Should I re-install Adobe Presenter 10?
(UPDATED: I've re-installed it and the same problem happen).
Thanks.
Rafael Bohrer.

Hi Rafel,
PLease apply the following fix and check if it resolves the issue:
1. Click on the below link to download the patch :
Shared Files - Acrobat.com
2. Please download the zip file and extract it.
3. Please check the version of Presenter installed on your machine.
4. For 32bit: Please copy the PptImgExporter.dll from 32 bit folder and paste it under “C:\ProgramFiles (x86)\Adobe\Adobe Presenter 10.0”.
5.For 64bit: Please copy the PptImgExporter.dll from 64 bit folder and paste it under “C:\Program Files\Adobe\Adobe Presenter 10.0”.
6. Try to publish the project now and check.
Regards,
Mayank

My Wi-Fi works, but after a while not anymore. Then I've to turn of on the Wi-Fi and turn it on after a few seconds. Can anybody help me with this annoying problem?

Hello,
My Wi-Fi doesn't work good. After a while it doesn't work and then I've to turn of the Wi-Fi and turn it on after a few seconds. Does anybody has this same annoying problem?
Jelle van Blokland.

Hi Jelle van Blokland,
Here is an article that has troubleshooting for Wi-Fi connections in iOS, including disconnecting:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Cheers!
- Ari

Help me with this simple problem

class Sample
     static String m(float i)
          return "float";
     static String m(double i)
          return "double";
     public static void main (String[] args)
          int a1 = 1; long b1 = 2;
          System.out.print(m(a1)+","+ m(b1));
}On running the above program, it responds with float,float .
Can anyone tell why ???
Regards,
Pradhip

there are specific rules for finding the right type, i think it might be under "conversions" in the JLS? You can find the JLS here:
http://java.sun.com/docs/books/jls/third_edition/html/j3TOC.html

Help me with this java problem plz

this is my interface:
public interface Lockable
    public void setKey (int key);
    public int lock (int key);
    public int unlock (int key);
    public boolean locked();
}and i implemented it in another program, can someone tell me what's wrong? i keep getting the error "int cannot be dereferenced." thx
public void setKey(int newkey){
       int key = newkey;
   public int lock(int key_lock){
       key = key_lock;
       return key;
   public int unlock(int key_unlock){
       key = key_unlock;
       return key;
   public boolean locked(){
       if (key.lock() == key)
            return true;
       else
            return false;
        }

if (key.lock() == key)key is an int. Ints are primitives, not references, so they don't have methods. A Lockable has a lock() method.

Help me with this spastic problem on my 5610

Similar Messages

Maybe you are looking for