Help me with transformation
I need to read the incoming field value COST_ITEM data source. The following table consists of two columns - № 1 and № 2, using this value to find a match in column № 2. Next, based on the detected line read column value № 1 and put into RESULT.
These steps must be repeated for each record in SOURCE_PACKAGE.
Help me
Hi,
Assume I_ZTABLE is the internal table with your column no1 and no2 data and the records have been inserted to I_ZTABLE in start routine.
Try this in your field routine:
DATA: WA_ZTABLE LIKE LINE OF I_ZTABLE.
SORT I_ZTABLE BY COLNO2.
READ TABLE I_ZTABLE INTO WA_ZTABLE WITH KEY COLNO2 = SOURCE_FIELDS-COST_ITEM BINARY SEARCH.
IF SY-SUBRC EQ 0.
RESULT = WA_ZTABLE-COLNO1.
ENDIF.
Thanks.
Regards,
Keng Haw
Similar Messages
-
Help with Transformation routine
Hi,
I have a transformation routine from a DSO to a cube. The DSO contains two infoobjects ( Form, Brand ) which are mapped to infoobject Material in the cube. My requirement is that i need to populate the material number based on the brand and form available in the DSO. Can you please help me with the routine to be written for material ?
Regards
Snehith.Hi,
perform below steps in start routine .
create one internal as t_material having 3 fields
and then write select query as :
SELECT material
brand
form
FROM /BIC/PGPUMATL
INTO TABLE t_material
FOR ALL ENTRIES IN SOURCE_PACKAGE
WHERE brand EQ SOURCE_PACKAGE-brand
form EQ SOURCE_PACKAGE- form
In transformation routine of material:
write below logic :
FIELD-SYMBOLS :<fs_ t_material > TYPE y_ t_material .
*" Get material class value from table /bic/agpud009900
READ TABLE t_material
ASSIGNING <fs_ t_material >
WITH KEY brand = SOURCE_FIELDS-brand
form = SOURCE_FIELDS- form
IF sy-subrc EQ 0
AND <fs_ t_material > IS ASSIGNED.
MOVE <fs_ t_material >material TO RESULT.
ENDIF.
Hope this helps you
Thanks . -
Pls Help me with steps to add data from xml file to SAP B1 through B1iSN.
Pls Help me with steps to add data from xml file to SAP B1 through B1iSN. I am getting stuck in xsl transformation. not able to understand where the mapping code needs to be added.
Pls explain me the steps for adding data from xml to B1 quotation step by step.
thanks and regards
PriyaHi,
Have you checked this: https://sap.na.pgiconnect.com/p45508295/?launcher=false&fcsContent=true&pbMode=normal ?
Thanks,
Gordon -
I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul -
Problem with transforming coordinate systems
Hiho,
i've got a problem with transforming coordinate systems.
When I'm trying to transform a sdo_geometry object to another coordinate sytem and then back to the old system, the coordinates are not the same.
Here's an example:
StartSystem SRID is 8220 (Longitude / Latitude (DHDN))
TargetSystem SRID is 8307 (Longitude / Latitude (WGS84))
Original object:
Polygon: {ExteriorRing: LineString: { (0.0, -90.0) (1.5, 0.0) (0.0, 90.0) (4.5, 0.0) (0.0, -90.0)} }
Transformed object:
Polygon: {ExteriorRing: LineString: { (0.0, -5156.620156177403) (85.94366926962347, 0.0) (0.0, 5156.620156177403) (257.8310078088704, 0.0) (0.0, -5156.620156177403)} }
Transformed back to old system:
Polygon: {ExteriorRing: LineString: { (0.0, -5156.620156177403) (4924.209525017614, 0.0) (0.0, 5156.620156177403) (14772.628575052844, 0.0) (0.0, -5156.620156177403)} }
Any ideas what to do?
Thanks for the help in advance.
DirkHi Dirk
Since the transform you are trying to do is just a datum conversion of lat./long. coordinates, even the first transform yields obvious rubbish. What you have provided here does not illustrate how you submitted your polygon to CS_TRANSFORM.
Provide the syntax of your construction of the corresponding SDO_GEOMETRY object and your SQL select statement that gave these results.
Bruce -
Please help me with portfolio.I am new in graphic design.I need portfolio done immediately soon as possible otherwise my design advisor will not let me register for fall. I need 15 or 10 artworks to show.Please help me.
Farooq,
If you look at the first one, you should be able to align quite easily as follows, View>Smart Guides being your friends:
1a) ClickDrag the top flower with the Selection Tool (black arrow) so it is clear of the pointy part;
1b) Click an empty spot on the Artboard to deselect, then ClickDrag the top flower by its bottom Anchor Point (Smart Guides say anchor when you are close enough to grab it) down to snap to the top Anchor Point on the pointy part (Smart Guides say anchor when you are close enough);
1c) Do the same for the boroom flower.
If you look at the third one, to get the triangles and the hexagon sized and aligned precisely, you may, creating them with stroke and no fill:
3a) Click with the Polygon Tool and select a suitable/chosen Radius and 6 Sides, then Object>Transform>Rotate by 30 degrees (or use the Rotate option in the Transform palette), you may Object>Transform>Reset Bounding Box to have it look nicer;
3b) Click with the Polygon Tool and select the same Radius and 3 sides, then deselect and ClickDrag the top Anchor Point to snap to the top Anchor Point of the hexagon;
3c) Object>Transform>Rotate by 180 degrees clicking Copy, deselect, and ClickDrag the bottom Anchor Point to snap to the bottomAnchor Point of the hexagon;
3d) Select all and Ctrl/Cmd+G to Group (for alignment purposes, you will know why if you try without grouping, see below).
To create full symmetry, you may use circles rather than almost circular ellipses; you may:
3d) Click with the Ellipse Tool and select a suitable/chosen Width = height;
3e) Object>Transform>Move a copy vertically by the Height (= Width) twice (or you may Ctrl/Cmd+D to repeat), to get three circles over one another with no gaps;
3f) Select the topmost and bottommost ones and Object>Transform>Rotate a copy by 120 degrees twice, to have all the seven circles precisley touching one another; you may Group them, but it is not necessary.
To have everything aligned, just:
3g) Select everything and click Vertical Align Center and Horizontal Align Center in the Align palette; you may click the pointy group or the circles ojnce more before aligning if you want to keep it in place (that will make it the key object that the other set is aligned to).
These ways may also help you further.
Edit: About half an hour after midnight here. High time to attend to other duties, before the sun is up. -
HI everybody i want to ask if you come me in help, i want to draw paths but when i use stroke options with pen or brush settings i loose quality when i zoom in , can someone help me with pen settings???
The work path is a vector object, and infinitely scalable, but when you stroke it, Photoshop lays pixels on a layer that follow the path. These pixels are raster based and can not be scaled without loosing quality. You do have options. If you want to make the raster layer bigger, transform the work path and stroke it again. Or work at a higher resolution in the first place.
Incidentally, you can't stroke a Path with the Pen, because it is a Vector based tool, and stroking is a raster based function. -
Could someone help me with a Runtime Error while saving a PDF file?
While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
PamIt is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
I open the pdf file
A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
I select ok
then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam -
Can someone pls help me with this code
The method createScreen() creates the first screen wherein the user makes a selection if he wants all the data ,in a range or single data.The problem comes in when the user makes a selection of single.that then displays the singleScreen() method.Then the user has to input a key data like date or invoice no on the basis of which all the information for that set of data is selected.Now if the user inputs a wrong key that does not exist for the first time the program says invalid entry of data,after u click ok on the option pane it prompts him to enter the data again.But since then whenever the user inputs wrong data the program says wrong data but after displaying the singlescreen again does not wait for input from the user it again flashes the option pane with the invalid entry message.and this goes on doubling everytime the user inputs wrong data.the second wrong entry of data flashes the error message twice,the third wrong entry flashes the option pane message 4 times and so on.What actually happens is it does not wait at the singlescreen() for user to input data ,it straight goes into displaying the JOptionPane message for wrong data entry so we have to click the optiion pane twice,four times and so on.
Can someone pls help me with this!!!!!!!!!
import java.util.*;
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.text.*;
import java.util.*;
public class MainMenu extends JFrame implements ActionListener,ItemListener{
//class
FileReaderDemo1 fd=new FileReaderDemo1();
FileReaderDemo1 fr;
Swing1Win sw;
//primary
int monthkey=1,counter=0;
boolean flag=false,splitflag=false;
String selection,monthselection,dateselection="01",yearselection="00",s,searchcriteria="By Date",datekey,smonthkey,invoiceno;
//arrays
String singlesearcharray[];
String[] monthlist={"Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sept","Oct","Nov","Dec"};
String[] datelist=new String[31];
String[] yearlist=new String[100];
String[] searchlist={"By Date","By Invoiceno"};
//collection
Hashtable allinvoicesdata=new Hashtable();
Vector data=new Vector();
Enumeration keydata;
//components
JButton next=new JButton("NEXT>>");
JComboBox month,date,year,search;
JLabel bydate,byinvno,trial;
JTextField yeartext,invtext;
JPanel panel1,panel2,panel3,panel4;
JRadioButton single,range,all;
ButtonGroup group;
JButton select=new JButton("SELECT");
//frame and layout declarations
JFrame jf;
Container con;
GridBagLayout gridbag=new GridBagLayout();
GridBagConstraints gc=new GridBagConstraints();
//constructor
MainMenu(){
jf=new JFrame();
con=getContentPane();
con.setLayout(null);
fr=new FileReaderDemo1();
createScreen();
setSize(500,250);
setLocation(250,250);
setVisible(true);
//This is thefirst screen displayed
public void createScreen(){
group=new ButtonGroup();
single=new JRadioButton("SINGLE");
range=new JRadioButton("RANGE");
all=new JRadioButton("ALL");
search=new JComboBox(searchlist);
group.add(single);
group.add(range);
group.add(all);
single.setBounds(100,50,100,20);
search.setBounds(200,50,100,20);
range.setBounds(100,90,100,20);
all.setBounds(100,130,100,20);
select.setBounds(200,200,100,20);
con.add(single);
con.add(search);
con.add(range);
con.add(all);
con.add(select);
search.setEnabled(false);
single.addItemListener(this);
search.addActionListener(new MyActionListener());
range.addItemListener(this);
all.addItemListener(this);
select.addActionListener(this);
public class MyActionListener implements ActionListener{
public void actionPerformed(ActionEvent a){
JComboBox cb=(JComboBox)a.getSource();
if(a.getSource().equals(month))
monthkey=((cb.getSelectedIndex())+1);
if(a.getSource().equals(date)){
dateselection=(String)cb.getSelectedItem();
if(a.getSource().equals(year))
yearselection=(String)cb.getSelectedItem();
if(a.getSource().equals(search)){
searchcriteria=(String)cb.getSelectedItem();
public void itemStateChanged(ItemEvent ie){
if(ie.getItem()==single){
selection="single";
search.setEnabled(true);
else if (ie.getItem()==all){
selection="all";
search.setEnabled(false);
else if (ie.getItem()==range){
search.setEnabled(false);
public void actionPerformed(ActionEvent ae){
if(ae.getSource().equals(select))
if(selection.equals("single")){
singleScreen();
if(selection.equals("all"))
sw=new Swing1Win();
if(ae.getSource().equals(next)){
if(monthkey<9)
smonthkey="0"+monthkey;
System.out.println(smonthkey+"/"+dateselection+"/"+yearselection+"it prints this");
allinvoicesdata=fr.read(searchcriteria);
if (searchcriteria.equals("By Date")){
System.out.println("it goes in this");
singleinvoice(smonthkey+"/"+dateselection+"/"+yearselection);
else if (searchcriteria.equals("By Invoiceno")){
invoiceno=invtext.getText();
singleinvoice(invoiceno);
if (flag == false){
System.out.println("flag is false");
singleScreen();
else{
System.out.println("its in here");
singlesearcharray=new String[data.size()];
data.copyInto(singlesearcharray);
sw=new Swing1Win(singlesearcharray);
public void singleinvoice(String searchdata){
keydata=allinvoicesdata.keys();
while(keydata.hasMoreElements()){
s=(String)keydata.nextElement();
if(s.equals(searchdata)){
System.out.println(s);
flag=true;
break;
if (flag==true){
System.out.println("vector found");
System.exit(0);
data= ((Vector)(allinvoicesdata.get(s)));
else{
JOptionPane.showMessageDialog(jf,"Invalid entry of date : choose again");
public void singleScreen(){
System.out.println("its at the start");
con.removeAll();
SwingUtilities.updateComponentTreeUI(con);
con.setLayout(null);
counter=0;
panel2=new JPanel(gridbag);
bydate=new JLabel("By Date : ");
byinvno=new JLabel("By Invoice No : ");
dateComboBox();
invtext=new JTextField(6);
gc.gridx=0;
gc.gridy=0;
gc.gridwidth=1;
gridbag.setConstraints(month,gc);
panel2.add(month);
gc.gridx=1;
gc.gridy=0;
gridbag.setConstraints(date,gc);
panel2.add(date);
gc.gridx=2;
gc.gridy=0;
gc.gridwidth=1;
gridbag.setConstraints(year,gc);
panel2.add(year);
bydate.setBounds(100,30,60,20);
con.add(bydate);
panel2.setBounds(170,30,200,30);
con.add(panel2);
byinvno.setBounds(100,70,100,20);
invtext.setBounds(200,70,50,20);
con.add(byinvno);
con.add(invtext);
next.setBounds(300,200,100,20);
con.add(next);
if (searchcriteria.equals("By Invoiceno")){
month.setEnabled(false);
date.setEnabled(false);
year.setEnabled(false);
else if(searchcriteria.equals("By Date")){
byinvno.setEnabled(false);
invtext.setEnabled(false);
monthkey=1;
dateselection="01";
yearselection="00";
month.addActionListener(new MyActionListener());
date.addActionListener(new MyActionListener());
year.addActionListener(new MyActionListener());
next.addActionListener(this);
invtext.addKeyListener(new KeyAdapter(){
public void keyTyped(KeyEvent ke){
char c=ke.getKeyChar();
if ((c == KeyEvent.VK_BACK_SPACE) ||(c == KeyEvent.VK_DELETE)){
System.out.println(counter+"before");
counter--;
System.out.println(counter+"after");
else
counter++;
if(counter>6){
System.out.println(counter);
counter--;
ke.consume();
else
if(!((Character.isDigit(c) || (c == KeyEvent.VK_BACK_SPACE) || (c == KeyEvent.VK_DELETE)))){
getToolkit().beep();
counter--;
JOptionPane.showMessageDialog(null,"please enter numerical value");
ke.consume();
System.out.println("its at the end");
public void dateComboBox(){
for (int counter=0,day=01;day<=31;counter++,day++)
if(day<=9)
datelist[counter]="0"+String.valueOf(day);
else
datelist[counter]=String.valueOf(day);
for(int counter=0,yr=00;yr<=99;yr++,counter++)
if(yr<=9)
yearlist[counter]="0"+String.valueOf(yr);
else
yearlist[counter]=String.valueOf(yr);
month=new JComboBox(monthlist);
date=new JComboBox(datelist);
year=new JComboBox(yearlist);
public static void main(String[] args){
MainMenu mm=new MainMenu();
public class WindowHandler extends WindowAdapter{
public void windowClosing(WindowEvent we){
jf.dispose();
System.exit(0);
}Hi,
I had a similar problem with a message dialog. Don't know if it is a bug, I was in a hurry and had no time to search the bug database... I found a solution by using keyPressed() and keyReleased() instead of keyTyped():
private boolean pressed = false;
public void keyPressed(KeyEvent e) {
pressed = true;
public void keyReleased(KeyEvent e) {
if (!pressed) {
e.consume();
return;
// Here you can test whatever key you want
//...I don't know if it will help you, but it worked for me.
Regards. -
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
Thank youPlease refer to Creative Cloud Help | Creative Cloud / Common Questions
CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
Regards
Rajshree -
HELP me with my K7N2 delta ilsr
Can anyone help me with this problem. I have just upgraded to MSI's K7N2 delta ilsr motherboard. Its all working quite well apart from the fact that the pc wont start up from cold....at all.
When I start the pc from an off state, it runs up the fans and drives, but does not post.
The diagnostic led pannel on the back of the pc shows that the cpu is faulty or not installed correctly.
If I then press the reset button, the pc posts, and boots up just fine.
It does this EVERY time I start up.
I have tried re installing the cpu, which is an XP 2800+ 333 barton, but to no avail.
I have asked a few questions on other forums, but I cant solve it.
These are the suggestions so far.
1. the psu (I have a Tsunami 400 atx psu) could not be giving out enough power on initial startup, but once the pc is running, it has enough to boot the pc from a reset.
2. The mobo or the bios could be at fault. I have not flashed the bios, or upgraded it in any way from original, so is there an issue with the original bios on these boards, and 2800 barton chips??? Could it be a mobo fault? The pc runs fine once the machine is booted.? how do I test it?
3. The cpu could be faulty? but would this not stop it running fuull stop?
4. my ram. I have a single stick of OCZ 512mb pc3200 ddr, which I was told would make the pc fly. Not shure on that statement, but is this ram compatible?? could this be the problem?
Im fairly new to the upgrade side of things, and I need some help with this one.
Also, Id be really greatfull if some one could talk me through flashing my bios to the latest version, as the thought of doing this narks me a bit...I dont want to mess it up and get a dead pc...
HELP+3.3v 14A
+5v 28A
+12v 16A
+5vsb 2A
-5v 0.5A
-12v 0.8A
Hope this helps, as my pc seems to be living with its case off a lot these days..haha -
First of all, I live in Ho Chi Minh City, Vietnam. Sometimes, I use a VPN to search on the web here. I purchased Toy Story 3 on my MacBook Pro 2011 OS/X - Lion through iTunes. I initially had trouble downloading it which may be due to being on and off the VPN but after a while it finally downloaded and shows up in my iTunes library on my MacBook.
Under my Apple ID account (which is the only Apple ID account I have), I look under purchase history and it shows that I paid for Toy Story which is where I got my Order # from. But if you go to the iTunes Store then to the Quick Links then click on Purchased, under all my Movies, it does NOT show Toy Story 3 as one of my movies.
Now when I go to my iPad (3rd gen.), Toy Story 3 does not show up under purchased movies (all or not on my iPad). It does not show up on my Apple TV as well. If I want to have Toy Story 3 on my iPad or Apple TV, then it says I have to purchase it again.
I have searched for help via Apple support communities but so far none of their solutions have worked for me. I have tried logging off iTunes & App Store on iPad and also shutting down the iPad. I also made sure that under iTunes Preferences>Store that iTunes in the Clouds purchases is checked. Can someone please help me with this? Your consideration is greatly appreciated. Thanks.Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items. -
HELP NEEDED WITH ADDAPTER-DVI TO VGA.
PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me. -
Help needed with Vista 64 Ultimate
"Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
-The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
once I set this to enabled Dolby and DTS went acti've.
I also have a question on 5. and Vista 64
-When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
How do I make 5. render properly on vistaWe ended up getting iTunes cleanly uninstalled and were able to re-install without issue. All is now mostly well.
Peace...
Maybe you are looking for
-
Reduced images when viewing a forum with safari
Hello all, I was trying to view an image that had been posted on a forum that I am subscribed to, using safari on my iPhone. I know that the image is 800x600 because I saw it full size with my office computer BUT when I try to view the same image on
-
Check Values....F4 functionality
Hi all PARAMETERS:code LIKE bkpf-bukrs OBLIGATORY . PARAMETERS:year LIKE bkpf-gjahr OBLIGATORY. PARAMETERS:pernr1 LIKE zissue_master-pernr OBLIGATORY. PARAMETERS:bookn LIKE zissue_master-bookno OBLIGATORY. PARAMETERS:new LIKE zissue_master-pernr OBL
-
I created a calendar in the wrong calendar year. I need to change it from 2012 to 2013. Help!!!
-
Submit button in Webdynpro tab
hi, I am new to Adobe forms, i am using WDJ. Does the submit button in the "web dynpro tab" call the onSubmit action mentioned in the interactive form UI element? do we have to write any script to perform the above requirment.? Also the button name i
-
Simple script help - Can you tell me how I can do this?
tell current application display dialog "Enter you name:" default answer "" buttons {"OK"} default button 1 {text returned:"Paul", button returned:"OK"} display dialog "I don't care about your name, bye." buttons {"Fine"} default button 1 {button ret