Help, missing pefas.dll and epitx.dll since installing itunes

Ever since installing iTunes, every time I start up my lap top I get the following two error messages:
RunDLL
Error loading C:\Users\Caroline\AppData\Local\Temp\pefas.dll
The specified module could not be found.
RunDLL
Error loading C:\Users\Caroline\AppData\Local\Temp\epitx.dll
The specified module could not be found.
Itunes does seem to work okay though.
Thanks in advance for your help
Caroline

Click here and follow the instructions.
(98808)

Similar Messages

Missing "CoreVideo.dll" and "CoreAudiotoolbox.dll"

I use Windows XP Pro and Safari for Windows. Everything has worked fine until I downloaded itunes for windows.
Since then, every time I browse through Safari, I get the messages "CoreVideo.dll and CoreAudioToolbox.dll were not found". In spite of this, Safari works well and itunes works perfectly. The two "missing files" are not missing at all, I found them in the C\Program Files\Common files\Apple\Apple application support folder. It's just that these error messages appear every few minutes and are very annoying.
Can you help?

i'm using Windows XP SP3 and Safari 4.0, and I got that message error too("CoreVideo.dll and CoreAudioToolbox.dll were not found"), but if I upgrade Safari with version 5 or 5.1, safari cannot load any pages. sometime show up error message that safari cannot communicate with server or cannot locate the server etc. so I uninstall and reinstall again safari with version 4 or 3. any suggest ?
Message was edited by: naning.go.blog

After an update itunes will not open. there is a missing msvcr80.dll i tried to re install itunes and now it says check system services. I have full admin to pc

after an update itunes will not open. there is a missing msvcr80.dll i tried to re install itunes and now it says check system services. I have full admin to pc

turingtest2 post 01/2014: MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776
iTunes for Windows: Missing MSVCR80.dll - https://sites.google.com/site/appleclubfhs/support/advice-and-articles/itunes-wi ndows-missing-msvcr80-dll - install as administrator.

TS1277 Unable to launch itunes from my PC. Get an error stating MSVCR80.dll is missing and need to re-install itunes. I've reinstalled numerous times...still not working. What should I do?

I'm currently unable to launch itunes from my PC. I get an error message stating that MSVCR80.dll is missing. It recommends that I re-install itunes and that may correct the issue. I've re-installed numerous times and nothing seems to be working. What should I do?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99968)

When trying to down load new itunes version, I get airtraffichost.dll, and itnunes will stop installing. HELP ME

when trying to down load new itunes version, I get airtraffichost.dll, and itnunes will stop installing. HELP ME

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find AirTrafficHost.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2

When I try to open FireFox it says I am missing nspr4.dll and mozqlite3.dll. How do I fix this?

I downloaded FireFox 8.0 not too long ago, and when I launched it, it said nspr4.dll and mozqlite3.dll were not found on my computer. I've used FireFox for a long time, and this has never happened before.

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup

Illustrator CS6 64-bit dvaui.dll and msvcr100.dll crashing problem, any solution?

First things first, trying to find a tech support Email address or phone number has been infuriating. The "3-step support wizard" which results in "go to the forums" is also infuriating and insulting.
I have a Windows 7 64-bit PC running CS6 64-bit (updated/current), and it's crashing at random (2-3 times per day). I see events recorded in the event log showing dvaui.dll and msvcr100.dll as the source. Other people have raised this as an issue, and all I see are guesses. Does Adobe have a credible solution for this yet?
I've tried running as a domain admin, which did not help.
Illustrator CS6 32-bit seems to be working perfectly (4 days straight, no crashing).
It seems to currently affect only one computer (5 others are fine). It's not repeatable, and has no discernible cause.
Also, format and reinstall is neither a solution nor an option.
To be honest, I'm looking for Adobe to address this directly: do you know why this is happening, and how long until it is solved? If an Adobe tech support will open a case, I have a file that the designer (I'm not the designer) was using during one of the crashes. I don't know if the crashing will be related (to the file), but I have the file just in case.
David.

Hi Larry,
Thank you for responding.
> CS6 is current in that it is still available for purchase and in the CC but it is now two versions behind.
I'm not quite sure what you are trying to say. Can you be explicit, please?
> As to your problem have you tried downloading the .dll files from Microsoft and reinstalling them?
I have copied and re-registered the DLL files from a known-good machine (that is to say that the machine doesn't exhibit any of the symptoms as the above machine), which did not help.
I'm really interested in having Adobe respond directly to this issue. I know they are aware of it.
It's clear that Adobe doesn't actually want to support this program, but people rely on it for their economic success. Both my client and his employees need this program to function properly and reliably, and I think anyone would agree that it's reasonable to expect that a problem like this (that affects more than just us) be, at a minimum, addressed. Adobe has my client's money, they had no problem accepting it. With that acceptance comes a duty to be responsive.
Thanks,
David.

TS3074 im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

Try the following user tip:
" ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows

What are analogous shared libraries that can be called using a call library function to user32.dll and lvtoolbox.dll when using Linux and Mac?

I am wondering if anyone is familiar with how to get similar information with a LV program using a Linux shared library as well as the corrolate Mac library to the Windows user32.dll and lvtoolbox.dll. I specifically am trying to get system metrics such as screen resolution information and cursor information as well as being able to set mouse position. I am trying to convert a LV Windows program to these other operating systems and I am unfamiliar with these platforms.
Thanks for your time - I really appreciate it.

There is no simple answer to that. On Linux you will likely have to call into X Server, which would be a pain to do, due to various versions and implementations of that. On the Mac there would be the difficulty that you can't call into the native ObjectiveC API but would need to find a Carbon API or something like that to do what you want.
If you seriously want to do something like this for multiplatform, you should bite the bullet and start coding an intermediate shared library in C. This library would export a LabVIEW friendly C API and access whatever system API you need to have for the particular functions. But multiplatform programming on this level is a pain in the ass, no matter what.
Message Edited by rolfk on 04-21-2010 08:26 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

QtCore4.dll and QtGui4.dll

Hello,
I have a question about Qt dll's. We createad a plugin for CS4 and CS5 using Nokia Qt 4.7.1 framework. It works fine, but we have to distibute our plugin with two dll's: QtCore4.dll and QtGui4.dll. We cannot put them next to .prm plugin file, because Premiere Pro will not try to find these dll's there - they should be in the same folder as "Adobe Premiere Pro.exe". With CS4, we didn't have any problems with that, but we are having trouble with CS5. CS5 already has QtCore4.dll and QtGui4.dll, but they are old versions.
Our questions are - why does CS5 use Qt, for what purposes, and is it ok if we overwrite these dll's with new ones? Also, when we update PP CS5, it looks like it overwrites Qt dll's with old versions again. Is there any way to avoid it? Or is there any way to store and load dll's that we need from some other place (without using Qt static compilation, of course) ?
Thank you.

I would recommend that you ship the Qt.dll files with their version on them... eg Qt1.2.3.4.dll and then install them in your distribution.
On Windows the place that is supposed to be is...
C:\Program Files\Common Files\[Company Name]\*.dll
It's then your responsibility during installation of the plugin (eg in InstallShield) to make a system environment variable
eg %COMPANYNAME_BIN%= C:\Program Files\Common Files\[Company Name]\
and append ";%COMPANYNAME_BIN%" to the %PATH% so that the .prm dll can find it during launch.
Then you shouldn't get version clashes any more.
e.

Get a license for using craxdrt.dll and crpe.dll

Hello,
I posted a question about the difference between the .Net Runtime and Crystal Report print engines :
Print in text mode to detect escape sequences
The response was : the .Net Runtime print engine can't print in text mode and you're not licensed to use the craxdrt.dll.
We need to print in text mode.
So, is there a way to get a license for the use of craxdrt.dll and crpe.dll ?
Or any suggestion ?

Hello Philippe,
The RDC COM components (craxdrt.dll is one part) were retired after CR XI R2 (v11.5). Unfortunately, you can't get a license for the CRAXDDRT.dll that is part of CR2008. The CRAXDDRT.dll is used for report previewing from with the Visual Studio IDE.
The CRPE is the underlying engine, and there's no public API for making direct print engine calls.
As for your underlying question - printing in "text mode" with the CR.NET SDK - I don't have any suggestions. Maybe others can respond to that on your original thread.
Sincerely,
Dan Kelleher

Access Denied AcroIEHelper.dll AcroPDF.dll and pdfshell.dll

I have bits and pieces of earlier versions of Adobe Reader on my computer, so before I downloaded the latest version, version 9, I tried to remove the earlier versions. I had to do it manually and seem to have removed all the bits and pieces recommended in the tech notes but I CANNOT REMOVE AcroIEHelper.dll AcroPDF.dll and pdfshell.dll from Program files\common files\Adobe\Acrobat\ActiveX I can see that other people have had this problem but there doesn't seem to be an obvious and foolproof way of doing it. (I tried the Microsoft Installer Cleanup Utility and nearly wrecked my computer - Word froze and disappeared altogether off my list of programs!)

Could not delete pdfshell.dll, but this worked (in Win XP):
1. Close all programs.
2. Open a command prompt window: Start > Run. Enter cmd.
3. Open Task Mgr.
4. Select explorer.exe and End Process. Yes to Warning. Desktop goes away.
5. In the command prompt window (remember your DOS commands) and go to the directory and delete the file. Apparently this works because explorer.exe is not running.
6. Restart Explorer: In the Task Mgr., File > New Task. Type explor.exe.

Difference between wtuxws32.dll and LIBFML32.DLL

Hi, I am trying to write a Tuxedo client application in Powerbuilder. I found that most of the functions are available in both dlls(wtuxws32.dll and LIBFML32.DLL). I am confused to which one to use. Moreover I could find the userlog() function only in wtuxws32.dll.
Please advice
JK

I find that the best way to work out what to link your program to is to look at what the BEA supplied buildclient does. So open up a DOS box and run:
buildclient -w -o x
buildclient lists all of the libraries it would link with in order to create a client. If you have the development SDK installed then try:
buildclient -o x
This shows the difference between a workstation and a native client. You can do exactly the same with buildserver as well.

How do you fix a msvcr80.dll error when trying to install itunes 11.1.4

How do you fix a msvcr80.dll error when trying to install itunes 11.1.4?

This also work100%
Removing and reinstalling iTunes and other software components
If applicable, disconnect any iPod or iOS device and close Microsoft Outlook.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later).
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (see note 1 below)
iCloud (if present)
MobileMe (if present) (see note 2 below)
Bonjour
Apple Application Support
Reboot your computer. Delete any of the following folders where they can be found: (see note 3 below)
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iPod
C:\Program Files\iTunes
also on 64-bit systems:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple
C:\Program Files (x86)\iPod
C:\Program Files (x86)\iTunes
Download the iTunes setup file and run it to install. Use an account with administrative rights. This can usually be achieved by right-clicking on the downloaded file and selecting Run as... or Run as Administrator. In some cases a combination of Shift or Ctrl keys may be required for the option to show, or it may not be necessary.
If you deleted iCloud and reinstalling iTunes doesn't automatically reinstall it visit iCloud Control Panel.

Can't add itunes library to my ipod etc since installing itunes on my new computer. HELP!

I have just installed itunes on my new PC and am trying to add some songs onto an ipod. The songs were purchases from the Itunes store. I go through the process of drag and drop onto the device (its the same with my ipad and iphone) but it won't work. Since installing itunes on my new computer I have bought an album off itunes and it downloaded with no problems - but any of my old purchases won't transfer over. Not sure what I am doing wrong. I haven't as yet transferred over my music libray from my old PC (songs that I burnt ) so not sure if it would be the same. I would have thought that songs that have been purchased in itunes should easily transfer. Help please?

Move the files for your new purchases out to the desktop.
Migrate your library properly from your old computer as given below.
Move the files stored on the desktop into the Automatically Add to iTunes folder.
Migrate iTunes Library
These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

Help, missing pefas.dll and epitx.dll since installing itunes

Similar Messages

Maybe you are looking for