Help - Missing: Tempo Value Slider, Time Signature Slider

I'm assuming I'm missing something really basic here but I can't for the life of my find an answer.
How do I set which controls appear in the project controls area at the top of Soundtrack Pro?
I see Sample Rate but I do NOT see the Tempo Value Slider, the Time Signature Slide, the Key Pop-Up Menu. Where in the menus do I control what does and doesn't appear in that top bar under the project name?

One note of clarification. I do understand that I can find the tempo slider and time signature slider (or even the button to change the timeline from beats to seconds) under the project tab in the left-hand pane. But I seem to remember all of these controls being conveniently located at the top of the timeline. Is this just a change with the new version of Soundtrack? Is there no way for me to restore those controls to the top of timeline alongside the sample rate and read/latch/touch button as I believe used to be the case?
Message was edited by: ahossain

Similar Messages

How do you set up tempo for compound time signatures? ie if I have a song that starts in 4/4 then goes to 12/8 but I want the same tempo

Logic doesn't let you set a bpm based on a compound time signature
So for 12/8 it gives the tempo for the 8s not for the dotted 4s
In order to get Logic to deal with this, I had to manually increase the tempo from say 90 for 4/4 to 135 for 12/8
Am I missing something?
Thank you
David

Hi
Yep... Logic's tempo display in the Transport etc. is always based on 1/4 notes (crochets), regardless of time signature.
You can get the "correct" tempo to display in the Score by using "dotted crochet=" or "quaver=" symbols, which may help with the necessary tempo calculations.
HTH
CCT

Metronome Click for 6/8 Time Signature

Forgive me if this is a really basic question, but how do you get the metronome to click only twice per bar for a 6/8 time signature? I'm writing a piece in a quick 6/8 and I don't want 6 ridiculously fast clicks per bar while I'm recording. I searched the discussion forums but didn't see any answers. Thanks!
iMac G5 Mac OS X (10.4.6)

...if you have a piece in 6/8 you should record it in
6/8 without having to resort to something as drastic
as changing the tempo and the time signature just to
get a metronome beat right. logic ought to be able to
do a dotted value beat, but as it can't, we will have
to write them for the klopfgeist AI.
This should be on the "short list" for the next update. Digital Performer allows you to choose dotted values for tempo and meter settings. There is no reason that Logic shouldn't have this capability. Especially with the new DP 5, there are some amazing new Click and Count-off features, especially for film scoring.
Having said that, you can do many of the same things in Logic (manually) by using the Klopfgeist instrument plug-in. Overall, an annoyance, but not a deal-breaker by any means.
PM Quad G5; PB 17" G4; iMac 15" G4; PM 500MHz G4 Mac OS X (10.4.5) PTLE7; Digi002R; Mbox; DP4.61; MachFive; Komplete2; EWQLSO Gold; MemoryMoog+

Help! I have to keep entering my wifi WEP password every time I slide my iphone 4S on again. It doesn't store the password as it should.

Help! I have to keep entering my wifi WEP password every time I slide my iphone 4S on again. It doesn't store the password as it should.

The use of WEP is not recommended for compatibility, reliability, performance, and security reasons; WEP is insecure and functionally obsolete. Any reason you're using WEP? I ask, because you might as well not have any security at all, & this is most likely your issue.
More info here:
http://support.apple.com/kb/HT4199

6/8 time signature - tempo calculation

Hi,
I have a project in 6/8, the tempo is 54.
I want to write in my score the metronome indication: dotted quarter note=
Which is the calculation I have to do because I've tried 54/3 which gives dotted quarter note=18, but this is not correct.
Thanks in advance.

Since when are all values interpreted, read, tapped, understood, and experienced as CROTCH values????
I think the underlying reason for this has to do with the way midi works. A standard midi file can contain a set-tempo meta-event, which is used to communicate tempo information. The set-tempo meta-event defines tempo in terms of microseconds per quarter note (see here or here). This means that quarter notes are the basis for defining tempo, at least as far as standard midi files are concerned. So I think Logic does it this way because midi does it this way, and Logic wants to be compatible, with regard to importing and exporting standard midi files.
Logic does provide a way to see the 'correct' tempo in the Score, as siderealxxx pointed out above. This is explained (albeit superficially) in the manual (pdf, pp. 886-7): "The tempo indicators in the Transport bar and the Tempo List always refer to quarter notes, even if a time signature with another denominator is used. As such, the displayed tempo differs, depending on the symbol being used."

I am trying to link slides, a specific slides to specific lines. Every time I attempt to link, Keynote automatically links me to slide 10, despite my attempt to link to a slide other than slide 10

I am trying to link slides, a specific slide to a specific slide. Every time I attempt to link, Keynote automatically links me to slide 10, despite my attempt to link to a slide other than slide 10; any ideas why? Thanks

create a shape on the slide e.g. a circle
right click the shape and select Add Link
make sure you select a specific slide number (don't select first previous or next)

Passbook causing iphone to restart each time I slide to view banner alert

Trying to figure out if it's the application that is causing the crash or new 5S or both.
Downloaded AMEX app and added a pass book scan through the app for one of my cards. Every time I use it the pass book displays a banner alert and it says " Slide to view details" EVERY single time I slide my phone displays the apple logo and automatically returns to lock screen without the banner alert like it restarted really quick.

Hi Rackham12!
I have a couple of troubleshooting suggestions for you regarding this issue. First, simply attempt to reset your phone according to the instructions in this link:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
If you are still experiencing the issue after attempting the troubleshooting step above, you may need to make a backup of your iOS device and restore it according to the steps in this article:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Take care, and thanks for visiting the Apple Support Communities.
-Braden

How do you edit date/time title slide???

I've used date/time title slides in my movie, but I can't edit the date/time. I want the time of the clip, instead it just shows the date/time I inserted the title into the movie. On other title slides, you just click on the info to edit but it doesn't seem to work???
Thanks

It will pick up the metadata from the clip.
So the first thing to check is whether your clip has metadata. Click VIEW/PLAYHEAD INFO and skim your mouse over the clip. Do you see any data and time info?
You can add date and time info in iMovie by right-clicking on the Event clip and editing the date and time. i am not sure if this will populate the title, but it might. In older versions of iMovie, it would not.
A better solution (assuming you know the date and time) is to select that clip in the Event.
Then right-click on the clip and select Reveal in Finder.
In the Finder, right-click/COPY. Go to your desktop and right-click PASTE. On this copy of the clip, change the name of the clip to clip-yyyy-mm-dd hh;mm;ss;ext where hh is hours in 24 hour time, ext is the current extension, and the rest should be self explanatory.
Once you have done this, import it into iMovie using FILE/IMPORT/MOVIES...
It is OK to import it into the same Event.
Now it should have the correct date and time metadata.

When installing maverick mailboxes disappeared, only have current emails. All the folders and content missing. Could anyone be of help. I do have Time Machine for backup.

When installing maverick mailboxes disappeared, only have current emails. All the folders and content missing. Could anyone be of help. I do have Time Machine for backup.

Solved the problem by clicking the gray triangle next to "On My Mac" and drilled down!

Wierd Time Signature Changes Within Song - HELP!!

Hey all, I am recording a song with a combo of real vocals & instruments, some loops, and some parts played via soft synth. Many of the recorded parts were originally recorded in Ableton Live, but I slaved it to Logic and re-recorded the parts in Logic tracks so I can continue and finish the song in Logic. It's all been done to a click track at 127 bpm. Between bars 17-20, the time signature changes radically, and it shows in the display at the top above the tracks. I don't know how this happened, or how to change it. Everything gets condensed to a smaller signature, although I cannot think of a better way to explain it. I took a screen shot and would be happy to email it to anyone (I don't know how to embed images in these posts). I am in desperate need of help here as this little glitch throws off the click for the remainder of the song. Thanks in advance for your help!!

Just position the playhead to bar 17 and change the time signature in the transport window to how it should be (e.g. like the rest of the song). Do the same in the following bars if needed. This actually deletes the "wrong" time signatures and sets everything back to "normal".

Time Between Slides In A Program - Captivate 7

I need to know where to look to lessen the time between slides in the program I am developing.

Hi there
Slide duration is configured in the properties panel.
Can you be more specific about what you are trying to do?
Cheers... Rick

Slide time DOES include transition

When using the Ken Burns effect (which can be gorgeous on certain pictures) the time used to display the slide INCLUDES the time used to accomplish transition. The net effect is that sometimes not even the whole pictures displays, as the transition starts running before the Ken Burns effect arrives at the END point!!!
anyone can confirm this?
it is annoying. I guess I don't want the transition time be included in the show slide time.
And obviously it would be really nice to have a "pause" between any Ken Burns effect and the start of the actual transition (so one can contemplate the actual picture shown in its last "mode"). This pause should be "customizable"

Problem solved. It was the avi file being placed on the
slide. Even though it was configured to end with the slide, because
it was created from a gif image that was configured to loop
continuously, it forced the slide to remain open. I opened the
original gif and saved it as a run-once avi, and then imported it
into the slide over the old looping gif-turned-avi, and now my page
transitions work exactly as they should.
I find it peculiar (read: annoying) that this program allowed
the animation to override the timing of the slide, in spite of all
settings to the opposite effect.

IMac 20-inch on OSX 10.7.4 running iphoto 11, my photos from my iphoto library have been deleted. I have time machine but the iphoto library file is missing when I access time machine, help please.

I have an imac 20-inch Late 2006 model on OSX 10.7.4 running iphoto 11, somehow the application ccleaner has deleted my photos from my iphoto library. I have time machine but the iphoto library file is missing when I access time machine.
To restore photos I have followed the steps below
Quit iPhoto.
Connect your Time Machine drive.
In the Finder, open the folder containing your iPhoto Library. Unless you've moved your iPhoto Library, it can be found in Home/Pictures/iPhoto Library.
Enter Time Machine. (Time Machine can be found in the Dock or in the /Applications folder.)
Choose your desired backup. The timeline on the right side of the screen displays a purple tick mark for each of the backups stored on your Time Machine drive.
Select the iPhoto library you would like to restore, and click the Restore button.
I dont get the option in step 6 as I dont have an iphoto library file to choose? Does anyone know why?

Hi Barry
Thanks but as mentioned all is intact, even at step 3 I can see the current library in Home/Pictures/iPhoto Library which has no photos, but when I access time machine any point before the NOW option the iphoto library in Home/Pictures/iPhoto Library is missing from the finder window.
As you can see here it is
and now its gone. I have no explanantion.
How do I go about moving this question as you suggested.

I'm working with a Mac, with 10.10.2 system. My Audition program has been working fine for years now. But, there is a problem I can't solve. All my markers on a given piece of audio allows me to left click to highlight the time signature until my audio

I'm working with a Mac, with 10.10.2 system. My Audition program has been working fine for years now. But, there is a problem I can't solve. All my markers on a given piece of audio allows me to left click to highlight the time signature until my audio reaches the one hour point. From there on, the left click will not give me the drop down menu in order to copy and then paste into an Excel sheet I then have to submit for the proofing purposes. After the one hour mark, I can only control/c in order to highlight, then when I slide up to my Excel sheet, I'm able to right click and paste. Why is the program not, all of a su allowing me to left cllick the mouse and have a drop down menu give me the option to "copy, " as it does for any time signature markers up to 1:00:00.000?

Which version of Audition? With the latest version of Audition running on a Windows 7 machine I can't get a dropdown menu at all when I left click on the time in Markers List. The only way to do it is with cntrl-c.

Why do I get Missing Parameter Values error from CrystalReportViewer in VS2005

Post Author: eseidel
CA Forum: .NET
Hi everyone,
I have spent way to much time trying to figure this problem out and am getting no where now. I was hoping someone with more experience in CR for VS2005(I think v.9) and VS2005 may be able to help. I have a report with 10 parameters that Im setting in code. I have another 3 parameters in a subreport(with same names as 3 in main report) that are being pushed in(I hope) through my ApplyParams() method. I have checked the output of each parameter before and after it is assigned in ApplyParams. All values are being set....So why do I keep getting an error when I run it for Missing Parameter Values no matter what I do? The error comes after SetDBLogonForReport(myConnectionInfo). I have been struggling with this problem for almost 3 days now and have tried numerous approaches. If I remove the subreport it works ok. Why is subreport not getting parameters(I think this is where the problem stems from)? Please any advice would be greatly appreciated. Thank you. If need be I can e-mail the report but I don't know how much that will help without being able to access the datasources.
Eric
Code Snippet
Private _Parameters As New System.Collections.Specialized.StringDictionary
Public Property Parameters() As System.Collections.Specialized.StringDictionary
     Get
         Return (_Parameters)
     End Get
     Set(ByVal Value As System.Collections.Specialized.StringDictionary)
        If (Value Is Nothing Or _Parameters Is Nothing) Then Exit Property
        For Each entry As DictionaryEntry In Value
            _Parameters.Add(entry.Key, entry.Value)
        Next
   End Set
End Property
Private Sub SetParameters()
    Parameters("kiPerformance") = rptKi.ToString
    Parameters("PreparedBy") = rptPreparedBy
    Parameters("SupplierName") = rptSupplierName
    Parameters("Supplier") = rptSupplier 'Param in subreport too
    Parameters("ApprovedBy") = rptApprovedBy
    Parameters("kiPerformanceGoal") = rptKiThisGoal.ToString
    Parameters("kiForecastGoal") = rptKiForecast.ToString
    Parameters("kiNextGoal") = rptKiNextGoal.ToString
    Parameters("kiBegRange") = rptBegDate.ToString("d") 'Param in subreport too
    Parameters("kiEndRange") = rptEndDate.ToString("d") 'Param in subreport too
End Sub
Public Function ApplyParams()
    Me.SuspendLayout()
    Dim rpt As CrystalDecisions.CrystalReports.Engine.ReportDocument = _
    crv.ReportSource
    If (rpt Is Nothing OrElse _Parameters Is Nothing) Then Return False
    Dim crParameterFieldDefinitions As ParameterFieldDefinitions = rpt.DataDefinition.ParameterFields
     If (crParameterFieldDefinitions Is Nothing) Then Return False
     For Each crParameterFieldDefinition As ParameterFieldDefinition In crParameterFieldDefinitions
         If ((Not crParameterFieldDefinition.IsLinked) And _
             _Parameters.ContainsKey(crParameterFieldDefinition.Name)) Then
               Dim crParameterValues As ParameterValues = _
               crParameterFieldDefinition.CurrentValues
               If Not (crParameterValues Is Nothing) Then
                     Dim crParameterDiscreteValue As New ParameterDiscreteValue
                     crParameterDiscreteValue.Value = _Parameters.Item(crParameterFieldDefinition.Name)
                     crParameterValues.Add(crParameterDiscreteValue)
                     'Console.WriteLine(crParameterFieldDefinition.Name & ": " & crParameterDiscreteValue.Value)
                    crParameterFieldDefinition.ApplyCurrentValues(crParameterValues)
              End If
          End If
       Next
       crv.ReportSource = rpt
       Me.ResumeLayout()
       Return Nothing
End Function
Private Sub ConfigureCrystalReports()
        Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo
        Dim pFields As New ParameterFields()
         Dim pField As New ParameterField()
         Dim disVal As New ParameterDiscreteValue()
         'Connection stuff,sorry I can't show you this part
         'Bind report
        rptCard = New ReportCard
       LoadDataSource()
       rptCard.SetDataSource(dsOcc)
       rptCard.Subreports("FailOcc").SetDataSource(dsOcc) 'Ive tried without this line as well
       rptCard.PrintOptions.PaperSize = PaperSize.Paper11x17
       rptCard.PrintOptions.PaperOrientation = PaperOrientation.Landscape
       crv.ReportSource = rptCard
       'Load parameters for report
       SetParameters()
       crv.RefreshReport()
       SetDBLogonForReport(myConnectionInfo)
End sub
Private Sub SetDBLogonForReport(ByVal conn As ConnectionInfo)
         Dim tableLogOnInfos As TableLogOnInfos = crv.LogOnInfo
         For Each myTableLogOnInfo As TableLogOnInfo In tableLogOnInfos
              myTableLogOnInfo.ConnectionInfo = conn
         Next
End Sub
Private Sub crv_Error(ByVal source As Object, ByVal e As CrystalDecisions.Windows.Forms.ExceptionEventArgs) Handles crv.Error
      MsgBox(e.Exception.Message)
      e.Handled = True
End Sub
Private Sub crv_ReportRefresh(ByVal source As Object, ByVal e As CrystalDecisions.Windows.Forms.ViewerEventArgs) Handles crv.ReportRefresh
       ApplyParams()
End Sub

Post Author: mewdied
CA Forum: .NET
By any chance are the parameters in your subreport stored procedure parameters?
There was a specific fix for stored procedure parameters available from:ftp://ftp1.businessobjects.com/outgoing/CHF/crnet20win32x86_en_chf.zip
The specific fix is described in the readme under Problem ID # ADAPT00532856

Help - Missing: Tempo Value Slider, Time Signature Slider

Similar Messages

Maybe you are looking for