Help MM-SUS!

Hi :
 I met a problem about MM-SUS scenario.
 It's ok ,when I send a supplier master data from R3 to SRM.
 But i send a PO there is a error about XI mapping in SRM(T-code:SXMB_MONI)
 Below is error information in XML file trace:
 <?xml version="1.0" encoding="utf-8" ?>
- <nr1:StandardMessageFault xmlns:nr1="http://sap.com/xi/SRM/Basis/Global">
- <standard>
<faultText>An error occured within an XI interface: Exception occurredA:BBP_BUPA:263 -Ordering party has to be a company Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
</standard>
</nr1:StandardMessageFault>
 Anybody give me a solution?Thank you so much
Best Regards

Hi
In this dump, its already clear the details are not getting passed over correctly.
NB. Ordering party has to be a company
Instead of Vendor ID, company ID (Organizational Unit maintained in SRM) should be used.
Hope it will help.
Pls reward suitable points.
Regards
- Atul

Similar Messages

MM-SUS Scenario---Error while posting the PO in SUS System from R/3 system.

Hi All,
An error occurred within an XI interface: Exception occurred:BBP_PD:004 -Partner 0000003000 not found E:BBP_PD:147 -Enter a country for partner 0000003000 with type 'Sold-to Party' Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57
The above is problem occurred in SUS system. I have checked the message SXMb_MONI Tcode for XML message.
Can any one suggest what could be the problem and the solution for the same.
we are working on MM-SUS scenario (Plan Driven Procurement).
Thanks
Jagan

Hi
Please go through the links below ->
purchase order doesn't create in srm sus
purchase order not create in sus
Enter a country for partner with type 'Sold-to Party'
BBP_BUPA_SUPPLIER:101
Unable to determine logical system of sender
Help MM-SUS!
SUS-MM:PO not transferred to SUS--message:'sold to party'
Error in SUS PO creation
Re: PO error in SUS-MM Scenario
Cancellation from SUS hangs in XI interface
Regards
- Atul

SUS Purchase order

Hello,
We are in SRM 5.0 and ECC 6.0 with plan driven procurement scenario. I
am creating a PO and sending the IDOC to XI and I get this error
message in SXMB_MONI in SUS.
"An error occured within an XI interface: Exception
occurredA:BBP_BUPA:263 -Ordering party has to be a company Programm:
CX_BBP_BD_ERROR===============CP; Include:
CX_BBP_BD_ERROR===============CM002; Line: 57"
I don't have any Business partner with role BBP004. Company that is replicated using BBP_SUS_BP_ADM has the roles CRM008 and BUP004 (Marketplace customer and Organizational Unit).
Secondly we have SUS and SRM in the same system but separate clients. Again we are facing the issue in Plan driven procurement scenario.
Thanks for your help.
Regards,
Bejoy

Hi
Please go through these pointers ->
Transfer PO from EBP to SUS (one client)
SUS - PO XML message error
Re: Help MM-SUS!
Few SAP OSS Notes to check out ->
Note 890260 Contact person not replicated from SUS to EBP
793118 Date check in XML inbox less strict
799072 ROS: Releasing a supplier fails
744635 POR XML inbound, problem with leading zeros in PO number
Note 735590 ERS from EBP is processed incorrectly in SUS
Note 357681 Additional documentation Enterprise Buyer 2.0
Note 524549 Sending bill-to address with XML P.O. from the EBP
Regards
- Atul

SUS - Supplier Self Reg and Vendor Connectivity

Hello Gurus,
Could you pls help on SUS and R/3 MM Business process. If anybody have documents, Pls send asap.
We are implementing SUS and MM process. I have couple of things on my mind.
1. Can we enhance SUS - Registration Page. I know its BSP Pages. Can we enhance with new fields, Pls give me the structures to Enhance.
2. How to the BP will create with the above enhanced fields.
3. How to Create Vendor in MM with the corresponding BP (Business Partner).
4. Vendor creation process is Mannual (Development) or through Config can we do this?
Appriciate for the immediate help.
Thanks,
Ram

Hi
1. You can configure the questions as part survey under SUS configuration.
2. SUS vendor transfer to MM can be done by developing content in XI. In std system u have to create manually in MM for vendors accepted in SUS.
Regards,
NNK.

Urgent - SUS with multiple company scenario

Hi all,
We are using the same client for EBP & SUS & we are on SRM5.0 & ECC 6.0.
My question is, do we need to maintain multiple companies as separate nodes in the Org structure.
The problem is, we are able to transfer a R/3 PO to SUS for 1 company code, wheras when we issue the PO for other company codes, the PO errors out in SUS with the message "maintain country for sold to party' .
As this is urgent, any help / input is highly appreciated.
Regards,
Aakash

Hi
No... you do not need to maintain multiple comapnies as seperate nodes in the Org Structure.
Please refer to the links below ->
Error Sending SRM PO Change to SUS-Different Country field contents deleted
Transfer PO from EBP to SUS (one client)
R/3 MM /SRM PO's not in SUS
Re: OSS note 961363 - for SUS MM order change scenario
Re: What are the steps to me followed to get the vendors from R/3 to SUS
Re: SUS documents
Re: Help MM-SUS!
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

ROS - External supplier directory -- Conversion of Business partner

Hi ROS gurus,
We are working on a ROS scenario with SRM 5.0 and the backend as the ECC6.0
We send a link to the supplier and the supplier sends us back the details and then the detailed questionaire, he answers.
The supplier is accepted and through transfer it has created a BP in both the SUS and the EBP system.
The SAP doc says that this BP needs to be converted to ur purchasing organization thru Manage organization data.
Manage Organizational Data will be displayed. In register Company Data scroll down to the area Address Data of Business Partner and in field Tax Jurisdictn enter the code: 3306120101
I dont find any with the admin login.
I tried to add manage business partner but no help in SUS.
I am little bit confused how to proceeed from here.
This a BP number in both the EBP and SUS system which I can see from the monitor business partner in EBP system. If I tried to change data there it says that this BP cannot be changed in the EBP system.
Any clues/ thoughts/links of what all the steps involved in bringing the external business partner to SUS.
Best regards,
Sridhar.

Hi,
The conversion can be done from Manager Business Partner --> enter the BP number in the EBP --> Copy as Vendor (in the dropdown) and execute.
After this the vendor has to be added to the purchasing organization.
But I am getting an error while doing this.
Organizational unit 00000000 does not exist; check entries
Message no. BBP_BUPA034
Any thoughts/suggestions/links please.
Thanks in advance.
Best regards,
Sridhar.

Third Party Order/STO

Hi Gurus,
I have a nice scenario here in my project. We are working in project system and plant and maintenance modules in ECC 6.0. The PS netwrok order is created with either of the options-network or third party. Now the scenario for third party is like this- The project wants the vendor to send the the material to directly to the project site and they mention project site address in the network order. Once they release the order- reqs are generated with item category as third party. We are working in extended classic scenario SRM 5.0. so reqs are to be tranfered to SRM and create PO further. My problem is these reqs are getting failed in SRM. These gives an error in SRM in SLG1- "ordering party does not exist".
Note that in network order they don't specify vendor but they only choose option third party and enter the address of the project site. How can I resolve this problem?
2. We are making material tranfers from one plant to another using stock transport order and the plants are assigned to one company only. within the company they are doing tranfer beacuse the plant sites are at different locations. Now for stock trannsport order they create plant as vendor in ECC using XK01 and assing supplying plant to this vendor. Then they create a work order in PM using iw01. In this work order they add componets and assign the this plant which is created as vendor to this componet in the field fixed vendor. Reqs are generated thru this work order but gets failed in SRM. SLG1 error i don't exactly remember now, but it gives an error related to the vendor..Please let me know how do I work for this scenario?
Thanks and Regards
Kapil

Hi
Please go through the links, which will help you ->
Contract Source of Supply Not Populating in SC
Contract: "Ordering Part could not be determined"
Re: Help MM-SUS!
Re: SUS - PO XML message error
Re: SRM Contract Catalog - Creation
Re: Creating an Invoice from XI doesn't work
SUS Purchase order
Transfer PO from EBP to SUS (one client)
Do let me know.
Regards
- Atul

Ordering party has to be a company

Hi All,
I have the following error when i post PO from R/3 to SUS.
An error occured within an XI interface: Exception occurredA:BBP_BUPA:263 -Ordering party has to be a company Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57
But intrestingly when i reprocess it SXMB_MONI in SUS system with out changing anything it gets posted...and PO gets created in SUS.
Can any one tell us what could be the reason.
Thanks
Jagan

Hi
Have you defined a purchasing company in SUS ?
Transaction BBP_SUS_BP_ADM:
1. Expand the Business partner folder.
2. Choose Business partner as company code.
3. In the selection screen, enter the following data:
The company code (corresponding company code in MM system)
Address and tax information
Other information if required
4. Choose Execute.
Related SAP OSS notes ->
Note 954410 - Error creating SUS Admin user in SUS-EBP one client system
Note 890260 - Contact person not replicated from SUS to EBP
Note 735590 - ERS from EBP is processed incorrectly in SUS
Note 947161 - SRM-SUS user management: Password needs to be entered
Related links ->
SUS Purchase order
Help MM-SUS!
Transfer PO from EBP to SUS (one client)
Hope this will help. Do let me know.
Regards
- Atul

I cannot update my Xperia U

I cannot update my xperia U by PC Companion as there is an update available. I do everything with the instuction but it doesn't want to go to update. I push the volume down button and connect the usb cable, the light becomes green and there happens nothing. I'm sorry but it's in polish but I hope you know it in English. Please, help!

SUS ( Sony Update Service) ... download and install it on pc and follow the on-screen instructions http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
or
http://www.sonymobile.com/global-en/tools/update-service/
Both the links are same
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

PS Network & activity Table related with PO

Hello experts ,
I need a table name which will give me the details of
1) Network is a primary key and related to it the list of activity numbers .
2) now I also need to link these with PO number ???
Please help
Murali.s

Use below link for table linkage. From Proejct You should get WBS from WBS you should get Network activity via Counter SAP Project System - A ready Reference ( Part 2 )
Pass this network NPLNR (Network Number for Account Assignment ) and AUFPL in to table EKKN. Check flag for that Purchase document is not deleted via field LOEKZ
With Regards
Nitin P.

Help: can not install ODI on SuSE Enterprise 10

I'm trying to install ODI 10.1.3.2.0 on SuSE Enterprise 10
Linux bottrop 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39 UTC 2006 i686 i686 i386 GNU/Linux
but i get the following error:
oracle@bottrop:~/tmp/setup/linux_i386> ./setup.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.17655/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
If i activate the LAX_DEBUG environment variable i get
oracle@bottrop:~/tmp/setup/linux_i386> LAX_DEBUG=TRUE ./setup.bin
Preparing to install...
Checking for POSIX df.
Found POSIX df.
Checking tail options...
Using tail -n 1.
True location of the self extractor: /home/oracle/tmp/setup/linux_i386/setup.bin
Creating installer data directory: /tmp/install.dir.17799
Creating installer data directory: /tmp/install.dir.17799/InstallerData
Gathering free-space information...
Space needed to complete the self-extraction: 620529 blocks
Available space: 162608560 blocks
Available blocks: 162608560 Needed blocks: 620529 (block = 512 bytes)
Computed number of blocks to extract: 1025
Extracting the JRE from the installer archive...
Extracting JRE from ./setup.bin to /tmp/install.dir.17799/Linux/resource/jre_padded ...
Extracting done, exit code = 0
Extracting JRE from /tmp/install.dir.17799/Linux/resource/jre_padded to /tmp/install.dir.17799/Linux/resource/vm.tar.Z ...
Extracting done, exit code = 0
Unpacking the JRE...
Unpacking the JRE...
gzip is /usr/bin/gzip
GZIP done.
TAR done.
Extracting the installation resources from the installer archive...
Extracting install.zip from ./setup.bin to /tmp/install.dir.17799/InstallerData/installer.padded ...
Extracting to padded done, exit code = 0
Extracting from padded to zip done, exit code = 0
Creating disk1 data directory: /tmp/install.dir.17799/InstallerData/Disk1
Creating instdata data directory: /tmp/install.dir.17799/InstallerData/Disk1/InstData
Extracting resources from ./setup.bin to /tmp/install.dir.17799/InstallerData/Disk1/InstData/Resource1.zip ...
Extracting done, exit code = 0
Configuring the installer for this system's environment...
========= Analyzing UNIX Environment =================================
Setting UNIX (linux) flavor specifics.
Importing UNIX environment into LAX properties.
Checking for POSIX awk.
========= Analyzing LAX ==============================================
LAX found............................ OK.
LAX properties read.................. OK.
========= Finding VM =================================================
Valid VM types.......................... J2
Absolute LAX_VM path.................... /tmp/install.dir.17799/Linux/resource/jre/bin/java
Expanded Valid VM types................. JRE_J2 JDK_J2
* Using VM.....(lax.nl.current.vm)...... /tmp/install.dir.17799/Linux/resource/jre/bin/java
checking for NPTL + JVM vulernability...
NPTL detected! checking for vulnerable JVM....
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
major :
minor :
patch :
vendor:
Vulnerable JVM detected... implementing workaround
========= Virtual Machine Options ====================================
LAX properties incorporated............. OK.
classpath............................... "/tmp/install.dir.17799/InstallerData:/tmp/install.dir.17799/InstallerData/installer.zip"
main class.............................. "com.zerog.ia.installer.Main"
.lax file path.......................... "/tmp/install.dir.17799/temp.lax"
user directory.......................... "/tmp/install.dir.17799"
stdout to............................... "console"
sterr to................................ "console"
install directory....................... ""
JIT..................................... none
option (verify)......................... off
option (verbosity)...................... none
option (garbage collection extent)...... none
option (garbage collection thread)...... none
option (native stack max size).......... none
option (java stack max size)............ none
option (java heap max size)............. 50331648
option (java heap initial size)......... 16777216
option (lax.nl.java.option.additional).. none
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
========= Display settings ===========================================
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
X display............................... remote
WARNING: The name of this host () and the setting
of this shell's DISPLAY (localhost:10.0) variable do not match.
If this launcher is being displayed to a Microsoft Windows desktop
through X Windows the Java Virtual Machine might abort. Try running
this installer locally on the target system or through X Windows to
another UNIX host if the installer unexpectedly fails.
UI mode................................. gui
Launching installer...
========= VM Command Line ============================================
options: -Djava.compiler=NONE -Xmx50331648 -Xms16777216
CLASSPATH:/tmp/install.dir.17799/InstallerData:/tmp/install.dir.17799/InstallerData/installer.zip:
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
========= Forking JAVA =============================================
/tmp/install.dir.17799/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Did not found any information/help about this issue! Can somebody help?

i am getting the same thing but with my ipad. i've successfully downloaded the siriusxm internet radio app to my iphone, but i can't to my ipad. just like you, the app is greyed out on my ipad. any suggestions?

Help!PO inbound ERROR in SRM SUS when create a PO from R/3

Hi All:
 I met a problem in SRM SUS,when create a po in R/3 and send this PO to SRM SUS,but there was a error in XI monitor t-code:SXMB_MONI, i have created the buyer via t-code: BBP_SUS_BP_ADM,and sent the vender from R/3 that is ok.
 check this xml.plesse take a look at error information.
 <FAULT_TEXT>An error occured within an XI interface: Exception occurredA:BBP_BUPA:263 -Ordering party has to be a company Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
 <FAULT_URL />
 I am used SRM server 5.5, package level is SAPKIBKT06.
 Plesse help....
Thanks
Best Regards

At least i did it.
The solution was in the transaction BUPA_TAXNUMTYPE. Here you can define wether you want to check the duplicated TAXNUMBERS or not. After applying some patches we think the value of the entry corresponding to our country, changed. So we put the value to OFF and everything worked fine again.
Thank you.

Need help setting up UML290 4g modem on SuSE Linux 11.3

greetings,
   I have been digging through this forum and found other users that have had success in setting up their UML290 with both Mac and Linux. Ref: http://community.vzw.com/t5/4G-Discussion/4G-LTE-Data-stick-Mac-Linux-Windows-other-authentication/td-p/347794/highlight/true/page/3 I took the plunge and signed for the new device. It has been activated and initialized using windows XP Pro. I have installed the modem device using YaST2 (configuation tool), set as /dev/ttyASM0 , set to #777 [email protected], etc. I am using Qinternet to make the connections. Below is the log, as it won't connect.
Qinternet.logSuSE Meta pppd (smpppd-ifcfg), Version 1.60.46 on linux-ib6d.Status is: disconnectedtrying to connect to smpppdconnect to smpppdStatus is: disconnectedStatus is: connectingpppd[0]: Plugin passwordfd.so loaded.pppd[0]: speed 480000000 not supportedpppd[0]: --> WvDial: Internet dialer version 1.60pppd[0]: --> Initializing modem.pppd[0]: --> Sending: ATZpppd[0]: ATZpppd[0]: OKpppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0pppd[0]: OKpppd[0]: --> Sending: ATM0pppd[0]: ATM0pppd[0]: OKpppd[0]: --> Sending: ATX3pppd[0]: ATX3pppd[0]: OKpppd[0]: --> Modem initialized.pppd[0]: --> Sending: ATDT#777pppd[0]: --> Waiting for carrier.pppd[0]: ATDT#777pppd[0]: NO CARRIERpppd[0]: --> No Carrier! Trying again.pppd[0]: --> Sending: ATDT#777pppd[0]: --> Waiting for carrier.
Basically, what am I doing wrong, and how do I correct it? I have been using the Pantech UM175 over the past years with success. There is also reference in the other post that this can or should be set up as an ethernet device. How can that be done?
4G LTE GSM General Device Settings-Phone Number: PhoneNumberAccount name: [email protected]: vzwAdvanced Settings-Carrier: GenericModel: GPRS (GSM/3G)APN: vzwinternetCID: 1
thanks in advance for any help,
idee

OK, I have tested about all I care to at this point. I have a g3 connection on Linux using the Pantech UML290 from Verizon.
Open SuSE 11.3
Kernel Linux 2.6.34.7-0.7 desktop
Gnome 2.30.0 (using LXDE)
QInternet for connections
Modem installed as /dev/ttyACM0
Tone Dial, Speaker Off, Detect Tone Dial Off
Details (default settings)
Buad Rate - 480000000
Init 1 - ATZ
Init 2 - AT Q0 V1 E1 S0=0 & C1 &D2 +FCLASS=0
Enable Device Control Via Qinternet
Provider information:
   Name: vzw4g #777
   Phone Number: #777
   User Name: [email protected]
   Password: vzw
Manual (defaults for all of the rest of the settings)
#777 provided the quickest (almost instant) connection to the carrier.  *99# & *99***3# also worked, but after a 60 second or longer wait.
The primary reason for the successful 3g connection seems to be the use of the Pantech Tool posted by Toughbook (linked here) at the Verizon forum. This process is all done under windows. Be advised, if you have the tool "read" your device, you must write, even if you made no changes. If you don't it won't work under the VZAccess Manager.
The default settings (AT+CGDCONT?) on your UML290 should be:
+CGDCONT: 1,"IPV6","vzwims","0:0:0:0:0:0:0:0",0,0
+CGDCONT: 3,"IPV4V6","vzwinternet","0.0.0.0",0,0
+CGDCONT: 4,"IPV4V6","vzwapp","0.0.0.0",0,0
It seems that the modem might connect directly under SuSE Linux without any complications using the modem configurations and provider information above. I am in a 3g area right now (4g is support to be here this summer) and when I try to connect with the unit straight out of the box, everything connected, but it found no carrier. I'll know more once 4g is in our area. There were a couple of other posts mentioning a direct hook up in Fedora. I could not find any direct posts confirming that, but I am guessing this is the case.
Willzzz suggested various options and tests (here post #12) on the Ubuntu forum. I set up and tried all. The test was to see if I could force the APN to see the 3g system under the 4g settings (out of the box, without the Pantech Tool alteration). I was not successful with any. I tried using all three of the AT+CGDCONT versions above in the Init3 setting. Phone numbers of *99#, *99***3#, and #777. Even though both options (within the init string & in the dial-up number) are supposed to change the APN, neither worked for me.
Many of these items have been discussed before in various posts in this forum. I don't claim credit for anything, but trying various options. Thanks to Neander, Willzzz88, Irieblue and Toughbook, among the others that added to those posts. The reason for the detail in this post is simply to document what I tried, what worked and what didn't hoping it might help others connect. Thank you all for your expertise on this forum.
idee

IAS 10.1.2.0.2 on SUSE 10 SP1 Help with FormBuilder

Hi all.
I have this scenario, I kown it´s not supported, but I´m almost arrive to put on line one IAS that I need, I´m realy need that IAS on SUSE because I need put on Virtual Server on Windows 2008 and SUSE it´s te only SO thats supported.
I try to show my configuration, SUSE 10 SP 1, IAS 10.1.2.0.2, all its working, and all servervices started, see Processes in Instance: ias_admin.iassuse32
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | 5315 | Alive
LogLoader | logloaderd | 5316 | Alive
dcm-daemon | dcm-daemon | 5307 | Alive
OC4J | home | 5371 | Alive
OC4J | OC4J_BI_Forms | 5372 | Alive
OC4J | OC4J_Portal | 5374 | Alive
WebCache | WebCache | 5344 | Alive
WebCache | WebCacheAdmin | 5784 | Alive
HTTP_Server | HTTP_Server | 5311 | Alive
Discoverer | ServicesStatus | 5312 | Alive
Discoverer | PreferenceServer | 5314 | Alive
open_report_suse | ReportsServer | 5962 | Alive
My problem its when we try to compile a form, when I call a formbld.sh frin Cygwin y have this
FRM-91111: Internal Error: window system startup failure.
FRM-10039: Unable to start up the Form Builder
I´m setting ok the Display, I see xclock.
I hope I can explain my problem, any help it´s great for us.
Thanks from Argentina.
Victor

I did start from Builder with this
I do this, but now when I try compile forms I receive error frm-91111: unable to start/complete the build. So I go back to old libXm.so.2 and compile complete.
But I have another problem
I can´t browsing any file under the compilebiulder, when I click to select any file or any directory the formbuilder back to home/oracle and I cant change directory or file, the ok buton no funcition.
Thanks

Help in installing Oracle Xe in suse 10.2

I have successfully installed Oracle XE in suse linux 10.2.(my laptop)
The place I had installed had a Lan network available.
Now I usually work in a location where there is no network.
after I get the message that oracle XE is succesfully installed, I tried to open the oracle home page, but i was getting an error, that there is no network,
I followed the instructions to give no proxies for my oracle home page address, etc.but to no avail.
Can someone help me in this.
Do reply to [email protected] incase you need more information, or reply to this thread.

Ok..
This is not a network issue at all..
I am unable to connect to oracle even though there is network..
I was wrong.
Now here is the scenario..
I downloaded the rpm for oracle XE
i ran this command
rpm -ivh downloads/oracle-xe-univ-10.2.0.1-1.0.i386.rpm
then i ran the command for configuring
$ /etc/init.d/oracle-xe configure
gave the default settings
then I went to
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin
and from there ran the script file
. ./oracle_env.sh
the instruction says....
You may also want edit your login or profile files so that these environment variables are set properly each time you log in or open a new shell.
For Bourne, Bash, or Korn shell, enter the following line into the .bash_profile (to log in) or .bashrc file (to open a new shell):
. /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh
For C or tcsh shell, enter the following line into the .login file (to log in) or .cshrc file (to open a new shell):
source /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.csh
Where do I find the .bash_profile file in suse 10.2?
is this the final step to start working on my database...?
has anyone worked on this before?
It also says...
You can find the database creation logs in $ORACLE_HOME/config/log/*.
I cant find this path in my system...
Someone help me..

Help MM-SUS!

Similar Messages

Maybe you are looking for