HELP: modification date/time of Indesig changes afther copy files to server

When i copy a folder witch some Indesign documents from my iMac (10.6.1) to our Apple xServe (10.6.1) its happens often that the Indesign documents on the server ands up with a changed modification date/time. It's changes the date/time in the date/tim when the copy to the server found place! We use 18 iMac's and encountered this problem daily on several iMac's
I hope someone can help me with this weird problem!

I am also experiencing this problem. I have done further testing and found that only one of my shared volumes (all on the same RAID) is having this issue, and further - that operations with package (collect for output) are also affected. If anyone has any info, it would be welcome!

Similar Messages

Hardcoding/superimposing the date/time-of-day on to video file?

Hello,
I've been working with a Panasonic AVHCD HDC-TM900 camera for a while and I need the date/time to display on my video files when I edit them in the source monitor and to display in the final product. There is no way to do this on the camera itself (according to Panasonic tech support), however I have found that VLC/Media Player Classic are able to display the information during playback. I think that it's using the subtitle track to pull the information out of the file, as it appears when I enable subtitles in VLC so I know the info is there.. Is there a tool in Premiere which would allow me to incorporate this information on to my project without having to spit out another file? Worst case scenario, I would also be open to a solution using Media Encoder as I use it for footage from other cameras but would like to avoid that if possible..
Thank you in advance for your suggestions,
AY9999

I'm not sure if this works for AVCHD, but I know it does for DV: DVdate x64 for Adobe Premiere CS5
Also, if the above doesn't work for AVCHD directly in Pr, you might look at this: Visual AVCHD Time Stamp

Date & Time won't change

I tell the date & time preference panel to set the clock to current Pacific Time. Yet when I close the panel, the date & time reverts to GMT current time. Is there a plist that may be corrupted and I have to delete?

Thanks for the tip. I'll have to print it out as the Mac involved is at my sister's house, 70 miles away.
BTW, I determined that it only changed to GMT if I enabled "Set date & time automatically. From your referenced post, it sounds like there may be a mismatch between what the Date & Time Control Panel says and what is actually set.
So if com.apple.preferences.timezone.selected_city shows GMT, then I should delete that pref, restart and let a new one be created, correct?

HELP - no date/time and clip order is weird

Hello,
I have a feeling I have seen people with the same problem as I have now but I haven't found a good answer on what to do. First of all, after having capture my clips into Premiere CS3, the date/time of the clips are obviously not in the app - can't find them anywhere so a workaround is to use paper and pen and look at the timestamp of the camera when a shot was taken. Not so good. It is weird that I can't make this date/time marking of clips work - even KISS apps like WMM does this very easily. Anybody?
But last time I run into a tricker problem. After capture I had a greater number of clips, and now I can't sort them in any sensible order. Maybe they were initally sorted chronologically but after having reordered for some other reason the chronological order seems impossible to revert to.
Also the automatic clip naming seem to be of no help:
Untitled Clip 01 01 9
Untitled Clip 01 01 10
Untitled Clip 01 01 11
Untitled Clip 01 01 12
Untitled Clip 01 02 7
Untitled Clip 01 02 8
Untitled Clip 01 02 9
Untitled Clip 01 02 10
Untitled Clip 01 03 4
Untitled Clip 01 02 5
seems to have the cronological order
Untitled Clip 01 01 9
Untitled Clip 01 02 7
Untitled Clip 01 03 4
Untitled Clip 01 01 10
Untitled Clip 01 02 8
Untitled Clip 01 02 5
etc
Anybody who can give me some advice about this. This is very time consuming and annoying...
Thanks
/D

Sorting by media start assumes all on the same tape and only one tape per bin. Might not be the case always, especially if you want to match up shots from several cameras using datacode. That's why I use Scenalyzer to put date/time in the filename.
Adobe didn't mention displaying datacode in their spec, so it shouldn't really be too much of a surprise to find it isn't included.
Since I don't use PPro's capture, I don't know the subtleties of the results of opting to split capture files into scenes. Does that give any hints in filename or logging etc?
If you want extra datacode facilities in CS5 (gossip says CS4 is beyond the new feature stage), then best submit a request via
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

To retrive data from Al11..with modification date, time...

hello All,
With the FM :- ADS2KIPUPL_GET_FILE_ATTRIBUTES I am able to get dir name, modification date, modification time .
But the problem is that I am only able to receive a single row. Please suggest how to retrieve data from AL11 for multiple row including the   dir name, modification date, modification time .

Hello Brad,
I have attached the FM below, As i applying any loop it is only retrieving the first row, Please suggest. I am not able to get the logic of do loop in al11. Please suggest with a sample...
CALL FUNCTION 'ADS2KIPUPL_GET_FILE_ATTRIBUTES'
EXPORTING
    i_filepath                = '/WIN/CZSKDAMBCMZD/MZD/SE2/300/PP/BESI/ARCHIV'
IMPORTING
   E_FILE_NAME               = file_name
    E_DIR_NAME                = dir_name
E_FILE_TYPE               =
E_FILE_LEN                =
E_OWNER                   =
   E_MODIFICATION_DATE       = m_date
   E_MODIFICATION_TIME       = m_time
E_PERMISSIONS             =
E_ERRNO                   =
E_ERROR_MESSAGE           =
EXCEPTIONS
   FAILED                    = 1
   OTHERS                    = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Date / Time In SAP ... is it the server Date / Time ?

Hi,
If my understanding is all right, the date/time in SBO application is the date/time on the server...
If I have many offices in the world and they wish to manage BP activities... Does that mean that the reminders will come
up when the SERVER will be at the date / time of the activity and not when the local time will be the time of the activity ?
Can I change the way things work ?
I've been told that the whole issue of time zones was discussed and this is resolved in the next release 8.8. But Of course, it does not help right now...
Do you think there is a workaround by the time we get upgraded to 8.8... ?
thanks,
Luce

You are right, the date/time in SBO application is the date/time on the server. As for the topic, you may check this thread:
Re: Time Zone Differenz between users and SQL Server (Citrix)
Thanks,
Gordon

Export Column help, ntext data doesn't export as a usable file

Hello, I'm failing at exporting what appears to be blob data in a database. I setup a data flow task that is pretty simple,
OLEDB SOURCE
     |
DERIVED COLUMN
     |
EXPORT COLUMN
Source is sql server 2000 db in 2005 instance with mode (80)
Derived column is simple expression that parses a path and filename together
Export column uses the blob column (which is unicode text stream plus new filename), Truncate and BOM are checked
This process seems to work successfully, but the resulting files are garbage. For example, one is a .txt file when opened, it contains exactly the contents of the database column for this row which looks like this excerpt:
begin 660 Call # 8114 Modules for METRO1 CU.txt
M34544DaQ($-5("`-"D1!5$$N0U4Q*#$I.E)53
Obviously I would expect real text here. Can someone help me understand what I am not doing correctly?
Let me know if you need more information.

I just went through the list, and tried several files, they are all garbage. a .jpg opened in paint can't open, a .doc file in word doesn't open, and .xls in excel doesn't open.
Contrast the two databases:
Adventure works Document column contains entries that look like this:
0xD0CF11E0A1B11AE1000000000000000000000000000000003E000
The magic database has entries that look like this:
begin 660 so60680.xls MT,a1X*&Q&N$`````````````````````/@`#`/[_"0`&
once exported through SSIS, the adventure works files look like this:
ÐÏà¡±á                > þÿ               5        7
The magic database files look like this:
begin 660 so60680.xls
MT,a1X*&Q&N$`````````````````````/@`#`/[_"0`&
I used the same 2 files for each databases both times.
From what I can tell sql server doesn't know what the magic db blob data is. So how is the magic user interface making the attachments available to the end user?

Help! Error 36 When I try and copy files to my external drive

Yesterday morning I discovered that I can't copy files from my desktop to my external hard-drive. The last time I performed this action was Saturday afternoon were all worked as normal, and to the best of my knowledge I've changed nothing on my system since then.
When I try to drag a file from the desktop to a folder on the external drive I get the message
The Finder can’t complete the operation because some data in “X” can’t be read or written. (Error code -36)
The external drive is the drive I use for my iTunes music files, and I've discovered this morning that I cannot import a CD to iTunes, however I can burn a playlist from iTunes to a CDr.
I'm using an iMac, and the external drive is a Western Digital 1TB (Journaled HFS+) connected via firewire.
I've seen references to similar issues through Google searches, but no definitive answer, can anyone help?

I/O error -36 bummers!
It could mean that there are bad blocks on the disk. Backup everything on that external disk now, if you don't already have it. Unmount and disconnect the external. A -36 error could also be just a poorly connected cable, or a bad cable or port. Remove all cables and reconnect making sure the connections are tight.
-mj

'Finder wants to make changes' when copying files between two Macs

Hey all,
I've read a few versions of this problem on the forums here but haven't tracked down a solution.
I have two Macs on the same network – I recently got a second-hand Mac Pro, and my Macbook Air. The computers are both on the network and can browse their respective folders and the like, but when I go to copy or sync files between the computers, I get a file permission issue.
Finder on either computer prompts: 'Finder wants to make changes. Enter your password'. At the same time a corrupted version of the file copies to the other computer but with 0 bytes that doesn't open...
Has anyone solved this issue before – it'd be greatly appreciated to hear any approaches!

On the laptop I got 513
Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Time Capsule - Network Error when copying files

Hi
I'm trying to copy files over to my Time Capsule, the drive is recognised and I can access it, and create folders inside it, but as soon as I start copying files, it tries to copy and sometimes copies 1 or 2 files and then an error message pops up saying
'Network Error
There is a problem accessing Z:\Backup'
where Backup is the folder I'm trying to transfer and Z:\ is the TC drive.
Please can someone help?
Thanks

Hi
I have solved this by rolling back firmware to 7.3.2 Looks like anything later, and I get this problem.........hope Apple fixes this.

How can I change database date/time(Sysdate) without changing OS date

Hello all,
I have a need to change the sysdate on a database for testing purposes and need to set the database date to a future date(ex. 6/30/2009). I have 2 other instances on the same server so changing the OS date is not an option. I'm familiar with setting the sysdate to a fixed value, but doing so changes the date to a constant because I still need the time to elapse. I've searched the forum and cannot find a way to do this. Any help would be greatly appreciated.
Thanks,

Write your own sysdate function in pl/sql and create public synonym.
Sorry, It doesn't work.
create public synonym sysdate from my_sysdate
ERROR at line 1:
ORA-00995: missing or invalid synonym identifierBartek
Edited by: brtk on 2009-05-14 15:54

Date & Time: Can't Change Year on a User Profile

I have multiple profiles on my Mac. One of the profiles has a year of "2556," even though I have it set to sync automatically via time.apple.com. Now when I log into a different user profile, the year is current "2015." I've unchecked to "set date and time automatically" and tried to change it manually on the user profile in question, but unable to change it.
Any suggestions on how to force a change on a profile?

Good link. The Language & Region was a good place to look. Attempting to restore defaults was not an option. However the Region was pointing to Africa. Once I changed that, everything else fell in place.
Thanks!

Help with Date/Time Field

Hi,
I'm very new at using Adobe LiveCycle Designer 7.0. For the past little while I've been using it to create a bunch of interactive forms. The only problem I've run into so far is a date and time stamp I've put in that is a Calculated - Read Only field. Only users with Adobe Reader and Professional can see this field. All other users with Adobe Standard can not see this field. Has anyone run into this same problem and know what I'm doing wrong?
The field is using a Runtime Property for the current date and time, instead of a Calculation Script

Thanks Niall,
The format of date and time is fine. When I open the file up myself (in Adobe Professional, not Designer), the form looks great and when others who only have Reader can also see this form fine. For some reason, it's only people with Adobe Standard that don't see this field and this field only in the form. Btw, we are all running Adobe 7.0 currently, but have plans in the future (hopefully soon) to upgrade.
Thanks again.
Rowena

Help With date/time

In need a time box that will convert “8pm” or “8 pm” or “8:00pm” or “8:00 pm” to military time. I tried some javascript on exit but it doesn’t quite work.
if (this.rawValue.length <= 5){
            var space = this.rawValue.indexOf(" ")
            this.rawValue = this.rawValue.substr(0,space) + ":00" + this.rawValue.substr(space,10)

This is not a trivial problem. I started coding some regular expressions to parse the date string but I quickly realized how difficult it is. The attached contains some of that code. I ended up using drop downs and a radio button to calculate military time (I think it works correctly). It is easier (somewhat).
// form1.page1.subform2.militaryTime::calculate - (JavaScript, client)
if (!(form1.page1.subform2.hrs.isNull || form1.page1.subform2.mins.isNull || form1.page1.subform2.meridiem.isNull)) {
var hrsStr = form1.page1.subform2.hrs.rawValue;
if (form1.page1.subform2.meridiem.rawValue == "AM") {
    if (hrsStr == "12") {
      hrsStr = "00";
else {
    var hrs = parseInt(hrsStr);
    if (hrs == 12) {
      hrs = 0;
    hrs = hrs + 12;
    hrsStr = hrs.toString();
this.rawValue = hrsStr + form1.page1.subform2.mins.rawValue;
Steve

Help with saving time stamps to "write to measurement file" excel format.

I am having problems saving the timestamps from my data to the write to measurement express vi for excel. My incoming data is converted from dynamic data to a 1d array for processing, which I understand you lose the time stamp data. I added a new array for time stamps but this array then cannot be converted back to the dynamic data that is requested to go into the write to measurement file express vi. I would prefer to leave the data in an array to be saved rather than converting it to a waveform so is there any way to add the time stamps from my 1d array back into the write to measurement file?

I set it up to build a waveform now but I am still having issues with it saving the correct timestamp. The time just incriments for every second (as it did before converting the dynamic data to the waveform). I attached a screenshot.
Attachments:
waveform.png ‏36 KB

HELP: modification date/time of Indesig changes afther copy files to server

Similar Messages

Maybe you are looking for