Help!{module_catalogue,15999,} Catalogue module is not showing up at all. Thoughts?

Followed all the steps in Dreamweaver to insert the Catalogue Module and nothing happens. I can see the module code, but when I preview the page nothing. I have added products to the catalogue, and tried adding multiple modules, still nothing. It's got to be something simple, but im missing it. What do you think? .......
http://nextlevelclinicstest.businesscatalyst.com/store.html

Hello Nxt_Lvl2012,
Two things I seen might be giving you hassle:
One - Your div class="shop-catalogue clear" --- The clear class is making this div hidden. In the skeleton.css line 300, it has visibility: hidden and height: 0.
Two: Your image path seems to be wrong, /_images/thumbs/ZipHood_Cat.jpg, give me a 404.
Hope that helps you out!
Chad Smith | http://bcgurus.com/Business-Catalyst-Templates for only $7

Similar Messages

HELP, please! iWeb Album Pages not showing up at all

My ftp uploaded pages are not showing up on either safari or firefox! I tried to fix the javascript via Wyodor's previous posts, but it's still not showing anything.
http://www.lakewilde.com
Thank you!

Yay, that was it! Thanks Roddy, I appreciate it. Have a great day

Some Devices are not showing up at all in the Discovery reports

Hi all,
The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
My question is:
Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
Your kindly respond is highly appreciated.
Thanks in advance.

I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice] : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice] : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice] : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
2. in the CSDiscovery.log:
Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
I checked the file and the casusers has a Modify permission
My Question is:
1. what is the meaning of those output exactly?
2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
Many thanks for your help.

Calculate result as average in the report not showing average for all

Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
Vijaya

SAP note solved the purpose.
Thanks & Regards,
Vijaya

HT4759 change do not show up on all my divices like contacts

change do not show up on all my divices like contacts

Are you saying that changes to your contacts are not syncing to your other devices? If so, you need to make sure that the contacts you are changing belong to the iCloud account. To do this, open the contacts app on your device and tap Groups. Do you have any non-iCloud accounts listed, such as On My iPhone, Gmail, Yahoo or an exchange account?
Also go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section). Do you have the Default Account setting there, and if so, what is selected as your default account.

Why is my website not showing up AT ALL in Google?

I uploaded my website at the beginning of this week and it's working OK, but not showing up at all in Google. It is not so much an SEO question, because even if I google the exact website, it still doesn't show.
I have no idea what I did wrong, but I assume it's a meta data issue. What should I have filled out in the HTML for <head> box? It's blank now.
Thanks!!!

You didn't do anything wrong most likely. It takes time to get indexed. Could be months depending on how your site is optimized, your content and traffic you generate to it.

Accordion not showing up at all in IE6

I have a standard accordion set up at
www.taradeal.com/pow.html
and it works fine in Safari and Firefox, but does not show up at
all in IE6 (the initial load of the text bits flashes up, but the
Spry re-work of the code seem to fail). I'm using Spry 1.6.1,
freshly updated for DW CS3.
The accordion display a standard RSS XML.
Here's some code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html; charset=iso-8859-1"
http-equiv="Content-Type">
<link rel="alternate" type="application/rss+xml"
title="RSS" href="pow-rss.xml">
<script src="SpryAssets-xpath.js"
type="text/javascript"></script>
<script src="SpryAssets-SpryData.js"
type="text/javascript"></script>
<script src="SpryAssets-SpryAccordion.js"
type="text/javascript"></script>
<script type="text/javascript">

</script>
<link href="SpryAssets-SpryAccordion.css" rel="stylesheet"
type="text/css">
</head>
<body>
... some table code
<div id="poems" spry:region="powrss" align="left">
<div id="Accordion1" class="Accordion" tabindex="0" >
<div class="AccordionPanel" spry:repeat="powrss">
<div class="AccordionPanelTab">{title}</div>
<div
class="AccordionPanelContent">{description}</div>
</div>
</div>
<script type="text/javascript">

</script>
</div>
...some more simple display, and a Google tracker
</body>
</html>
Thanks for any pointers on what's wrong.
-dan

Well, it seems to be a bug in the handling of the XML file
contents. I fixed it by changing the code in SpryData.js to force a
"manual" parse of the XML code. Not a good solution, but I don't
know the codebase well enough to find the root of the problem. I
know that the firstChild.nodeValue is "Object required" but I can't
figure out who sets that and why. Maybe no ActiveX object?
http://www.taradeal.com/pow2.html
still broken in IE6 if you want to check it
http://www.taradeal.com/pow.html
uses changed code and dynamic-data accordion works
Spry.Data.XMLDataSet.prototype.xhRequestProcessor =
function(xhRequest)
// XMLDataSet uses the responseXML from the xhRequest
var resp = xhRequest.responseXML;
var manualParseRequired = true; /*** DC for IE6 **/

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
Power off the AirPort by pulling the power cord
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
Release the reset button and allow a full minute for the AirPort to restart
Now try to configure the AirPort again. If you continue to see the same symptoms as before, the AirPort will need to be replaced.

The default wallpapers are not showing up. All I see is a black screen. How do I get back default wallpapers?

Hello,
I have a problem with my iPhone. The default wallpapers are not showing up. All I see is a black screen. Can someone tell me what has to be done?

Go to the Home screen with one press of the home button. Then double press the Home button. When the Dock raises, tap and hold one of the app icons untill they all start jiggling and a red X appears. Tap the red X on the video app to quit the app.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

It's a bit hit and miss, Walter. Sometimes the box to enter text shows up straight away in the inspector under "text". Other times, although you click "text" in the inspector, there's nowhere to actually write anything.... then what you have to do is move the trackbar over the Title Box until you see the text boxes in the main Viewer. In the Viewer, double click a text box.... you can enter text there, but it's a bit flaky, but when you've clicked in it, you'll find that under "Text" in the inspector, the box for inputting text has magically appeared!
I'm not sure if anyone else has this trouble, but it is a bit of a pain!

Insert into viewobject in app module does not show entity validation errors

Hi everybody,
I am using JDeveloper 10.1.3 and ADF BC/ADF Faces. I want to have a button on one of page and I want that whenever user clicks on this button a records is inserted in a table. so I created an application module service method and exposed it on the client interface and the put it on my page using Data Controls Tab.
Here is some part of my code in application module :
public void setMember() {
HrMembershipsViewImpl membershipView = (HrMembershipsViewImpl)am.findViewObject("HrMembershipsView1");
HrMembershipsViewRowImpl newRow =(HrMembershipsViewRowImpl) membershipView.createRow();
newRow.setAttribute("MemberId",memberID); //this.getCode());
newRow.setAttribute("MembState","1");
newRow.setAttribute("CardState","1");
membershipView.insertRow(newRow);
trans.commit();
When this method tries to insert a record which violates a validation rule in the Base Entity Object, the screen does not show any error regarding to violating the business rule but nothing is inserted. I changed my code and captured the exception around the commit and I found that a JBO-27023 Exception happened after commit ( which was very surprise since the page does not show any error).
Now I can change my code to to the following to show that error happened.
public void setMember() {
try {
trans.commit();
catch (JboException ex) {
getDBTransaction().rollback();
throw new JboException ("There is an error during commit");
throw ex;
But I believe it shouldn't be like this. Normally, we should be able to insert programmatically in a view and if the business rules are violated we should get the violation error messages. If I use the above mentioned method we can not understand what business rules are violated.
Does anybody know what is wrong with my solution? I have seen a lot of times that using application module is the best way for adding functionality to the application pages but I really feel that something should be wrong if we can not get business rule violation messages.
Any help or references would be highly appreciated.
Thanks in advance,
Navid

Hello Navid,
it should work without try-catch.
1. When you add try-catch, does your error message appear on the page?
2. Does your page contains af:messages component?
3. Does your button have any navigation to another page?
Rado

Preview module does not show ajustments

Hi everyone
This is a problem that has arisen very recently.
When carrying out adjustments in the develop module the preview image does not show the changes however the thumb nail in the filmstrip at the bottom of the screen does.
Can anybody help please as it is rendering the programme unusable.
Many thanks

Sorry Keith details as follows
What version of Lightroom? 5.4
Have you installed the recent updates? Yes
What operating system? Win 7 x64
Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive? Intel I7, 16GB ram, runs from 1TB D drive with 580GB of space
Has this ever worked before? If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? Recently added the following Dr Brown services, Adobe paper textures pro, Adobe watermark, Adobe emailer
Thanks

[Help] Password input box NOT showing up at all.

The actual box used to type the password in just will not show up. My phone can only be turned on my swiping the screen up. Everything else shows up, the time, email and text noticications, but when I swipe the screen up all the way I am left with a dimmed background and the black bar that goes across the top of the screen. I've had a password on my phone for over 3 months and haven't turned it off.
I can't restart my phone because the power button is broken and sticks if pressed... meaning it will turn itself on and off continuously for hours on end until I wiggle it out of place.
Is there any way to fix this other than waiting... a full 24 hours, probably, since I just charged my phone, for the battery to die?
Solved!
Go to Solution.

NotApplicable wrote:
I can't restart my phone because the power button is broken and sticks if pressed... meaning it will turn itself on and off continuously for hours on end until I wiggle it out of place.
Is there any way to fix this other than waiting...
Reboot: With the BlackBerry device POWERED ON, using the side edge volume keys, press and hold down both of the Up and Down volume keys for about 20 seconds, ignoring the initial screenshot message... the screen will go black and reboot.
Try that and see if you password screen then appear correctly.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS1591 I followed all the steps and everything but my ipod is still not showing up at all. Help Please!!!

I have looked at everyones comments and everything. When i plug in my ipod the usb works and everything because my ipod is charging. It will not show up anywhere in iTunes at all. Anyone help please?!

Have you tried another cable and USB port?
If you have OSX 10.6.8 on the computer did you look at the Additional Information paragraph of the article you cited?
Try on another computer to help determine if yo have an iPod or computer problem

Function module u0091GET_PRINT_PARAMETERSu0092 Not showing all columns

Hello all,
I am using function module GET_PRINT_PARAMETERS
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      DESTINATION    = LOC_DEST
      COPIES         = WF_COPIES
      LIST_NAME      = WF_LISTNAME
      LIST_TEXT      = WF_LISTTEXT
      IMMEDIATELY    = ' '
      RELEASE        = ' '
      NEW_LIST_ID    = 'X'
      EXPIRATION     = WF_DAYS
      LINE_SIZE      = 132
      LINE_COUNT     = 65
      LAYOUT         = 'X_65_132'
      SAP_COVER_PAGE = 'X'
      RECEIVER       = 'SAP*'
      DEPARTMENT     = ''
      NO_DIALOG      = 'X'
    IMPORTING
      OUT_PARAMETERS = WF_PARAMS
      VALID          = WF_VALID.
NEW-PAGE PRINT ON PARAMETERS WF_PARAMS NO DIALOG.
    PERFORM WRITE_PDF_SUMMARY USING P_VALID P_COND P_ZMGC P_ZOGC P_PDF.
    NEW-PAGE PRINT OFF.
But in my report there are 10 columns and in download file its showing only 6 columns .If I increase that size to X_65_200 Then it shows all columns But its not readable. Please tell me how can I use that fix size X_65_132 & it will show all columns .
Message was edited by:
        megha waykar

You r right,But that program is already developed in following sequence
*==> 1. Create Virtual Spool
            using FUNCTION 'GET_PRINT_PARAMETERS'
*==> 2. Write Report to Virtual Spool. Use NEW-PAGE PRINT ON option.
            NEW-PAGE PRINT ON PARAMETERS WF_PARAMS NO DIALOG.
            PERFORM WRITE_PDF_SUMMARY USING P_VALID
            NEW-PAGE PRINT OFF.
*===> 3. Prepare Path and set spool number.
*===> 4. Convert List to PDF format.
             Use function 'CONVERT_ABAPSPOOLJOB_2_PDF'
*==> 5. download PDF file
            CALL FUNCTION 'GUI_DOWNLOAD'.
and it's not showing readable download file.
I don't have to change whole coding. I just want to increase that font.

Help!{module_catalogue,15999,} Catalogue module is not showing up at all. Thoughts?

Similar Messages

Maybe you are looking for