HELP. More RAM installed, more RAM is used!

I installed 1GB RAM on my computer, so now I have 1.25GB.
I noticed that frequently the computers takes all the available RAM, even when I just use one or two applications. The actually used RAM is maybe a third of the "allocated" RAM.
Is this normal? Or is there an issue with this particular stick?
Regards

If you haven't already, you should read this Apple article on memory usage: http://docs.info.apple.com/article.html?artnum=107918
As a related aside, while you're in the activity monitor, as you look at the system memory tab, note the page ins/outs. The numbers reset when you reboot, however, what's important is the relationship between the two. Page outs are when the system has to write part of memory to the hard drive, which reduces overall performance. In a perfect world full of memory, page outs would be zero. But, the world isn't perfect, so depending on the tasks you run, you'll have page outs. Generally, if the page outs are 10% or greater of page ins, you can use more memory (In your case, you've maxed out your memory). With your larger memory, your page outs should be reduced, so you may see better performance.

Similar Messages

HELP can't install lion can't use the recovery HD

After lion has sat there for an hour installing with the installation bar and after it had completed installing and restarted. When it boots back up it just sits there with a grey screen, apple logo and a little rotating circle. I have let that rotating circle sit there for an hour and nothing is happening. I did a force shut down and booted it up in the recovery HD. I went to reinstall lion, everytime there is nothing left on the bar a message pops up "Do you want to cancel this download?" and I never touched anything. After pressing cancel twice to continue the reinstallation it goes back to the menu it start with. What can I do?
Thanks for any help

I was too optimistic. Now I was able to install PS again from the Download link in the CC website.
I followed as PS was installed in CC console's "Find new apps" section. Everything OK here.
I can see "You installed Photoshop CC" in CC console/home. Everything OK here.
I can't fint the actual program anywhere. Nothing on Launchpad. Theres a folder "Adobe photoshop CC" in Finder/Applications. But it's relatively empty. Nothing to start the actual program with.
I restarted already. Problem remains.

Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!

4) When my computer crashes, once it starts again, it says "repairing" ... but I am not familiar with reparing permissions -- can you explain how I might do that?
If you are running OS X Lion, then you can restart your computer and then press and hold the 'Option' key immediately after you hear the start up 'gong' (usually heard when grey screen shows as it restarts).
You should see at least two Disks to choose from. Choose 'Recovery Disk' and wait for it to load, then choose 'Disk Utility' option in the Utilities dialog.
Once Disk Utility loads, do the following:
1 - In the left hand pane, choose your system partition (usually called either 'Macintosh HD' or 'Macintosh SSD'). Note - don't choose the actual hard drive listed above the partition when using Disk Utility in OS X Lion as this doesn't offer options for repairing due to it including the Recovery Disk you have loaded in memory.
2 - Click the 'First Aid' tab
3 - Click the 'Repair Disk Permissions' button in lower portion of main pane and allow to complete. Ideally, you will get a final message in main pane saying Disk Permissions are repaired.
4 - At lower right of same pane, click the 'Repair Disk' button and allow to complete. Ideally, you will get a final message indicating that Disk Repair is completed and all appears to be good.
5 - Quit Disk Utility > Close Utilities dialog window > Click 'Restart' button (confirm as needed).
You should boot straight into the system partition when complete.
Note - any red text in the main pane text while running the repairs will be issues and you will need to follow the advice given or post back.
If you are running Snow Leopard; then (as David mentions) boot from your first OS X reinstall disc and run the Disk Utility the same way; except you select the actual hard drive listed at top of left pane (not the partition below it). This is because Snow Leopard does not use a 'Recovery Disk' partition and repairs can be run on the HD or SSD itself.
Hope that helps.

HT1423 i am replacing ram in an early 2009 imac. easy - right? but the pulling on the tabs didn't work. i have had the ram sticks out before; but now they don't budge. should i apply more pressure? use a tool to pull harder? will the tabs break off?

i am replacing ram in an early 2009 imac. easy - right? but the pulling on the tabs didn't work. i have had the ram sticks out before; but now they don't budge. should i apply more pressure? use a tool to pull harder? will the tabs break off?
sorry for the format - my 1st question...

thanks Kappy.
the computer has beem working for years after my 1st ram removal; but i may have pushed them back too hard. i did pull firmly - tried pulling up slightly; tried tugging on the sides of the stick; pulling in pulses. the only thing i have not tried is using needle nose plyers with protection on the tab film itself.
have you had the pulling harder ever work? or break the tab?

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

When starting Window XP on my laptop (which was connected, in the past, in a wi-fi network now no more available) appears immediatly this allert: "iTunes Helper was not installed correctly. Please reinstall iTunes. ERROR 7." Reistallation impossible!

When starting Window XP on my laptop (which was connected, in the past, in a wi-fi network now no more available) appears immediatly this allert: "iTunes Helper was not installed correctly. Please reinstall iTunes. ERROR 7."
Reistallation of older or up to date iTunes versions is impossible because: "Installation package iTunes.msi is located on a network resource not available" and because "It is impossible to remuove thew previous verson of iTunes. Impossible fto find the path."
Someone can help me ???
Thank,
Gerald

Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

When i try to install my copy of photoshop elements 1.0.1 , get the answer to install internet explorer 4.0 or more, but i use the firefox browser. by the way, the internet explorer installation was not successful with my windows 8. What can I do?

when i try to install my copy of photoshop elements 1.0.1 , get the answer to install internet explorer 4.0 or more, but i use the firefox browser. by the way, the internet explorer installation was not successful with my windows 8. What can I do?

Photoshop Elements 1.0.1 seems like very old software 2001 I believe. Try asking in the Elements maybe someone there will be able to answer your question. Photoshop Elements

Is there offline mavericks help? There should be an option to get it installed. We need help more often than we are online. The idea of only online help is lazy and uncaring of the dealer to clients.

Is there offline Mavericks help? There should be an option to get it installed. We need help more often than we are online. If there isn't, then idea of only online help is lazy and uncaring of the dealer to clients.

I've done just that.
And another on the finder column bug in list mode.
And a few more in the pipeline if I find the motivation: I'm afraid my long relationship with Apple is flagging. They are excessively focussed on consumer goods and leaving their core business to wither away.
Maybe more serious users aren't profitable to them, and they are happy to let it wither.
So presumably they are happy if we wander off and start focussing on all the open source unixes out there.
p.s. not happy with general Apple trends since about 10.6.8, can anyone tell ?

HELP!!! Message - (One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) How do I get this to stop?

I bought a new Sony Vaio Laptop running Windows 8, 64bit, i7 processor. Everytime I open iTunes and then close out, the following message occurs: (i-tunes message - One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) Then it starts counting down from 20 seconds unless I just click on the (Quit) button. How do I get this to stop? Please be specific, I am challenged when it comes down to computers.
Thank You

This was extremely annoying for me, also. I started uninstalling unneeded Sony applications to try to narrow down the problem. It turned out not to be a Sony application... it is some functionality built into the bluetooth driver software package by Broadcom. Uninstalling the bluetooth package (via the control panel) takes care of the problem. Itunes also boots up way quicker. But uninstalling it will remove features related to bluetooth and nfc. For me, that isn't an issue, since I don't use them. Since you said you're "computer challenged" I would probably just send an email to sony complaining about the problem. They'll get in touch with Broadcom eventually (the manufacture of the drivers) and get the problem fixed.
Side note: the Broadcom package is huge... nearly 1GB in size. Which is crazy. I can't imagine what it does considering the size of it. Entire operating systems can take up less storage. Also, I have no idea how it starts an itunes plugin without placing it into the standard plugin directories.

Need help with ram on bootcamp

hey guys i need help with getting more ram on the pc side of bootcamp.
it says i have 1.99 of ram on the pc side
then on the mac i got this
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 4 GB
wanting to know how to get more ram over to boot camp

Rodney:
You cannot physically or via software add/move RAM from OSx side to Windows side. This is because you run Leopard and Windows separately and therefore when one is running the other is not active. The only thing that controls how much RAM Windows sees/uses is determined by the type of Windows you have installed (32BIT or 64BIT). Please do not confuse that with Gigabytes of RAM or disk space.
32BIT Windows has a maximum limit of 3GB of RAM (it often uses only around 2GB of RAM when it is sharing the system RAM with your video card. I believe this is the case with you.
64BIT Windows will be able to sees/use all of your 4GB of RAM.
Leopard sees/uses all of your 4GB of RAM.
If you have installed Windows XPSP2 and it is working properly on your boot camp partition then I can assure you that it is the 32BIT version.
FYI - The only time that one can select/decide how much RAM Leopard uses and how much RAM Windows uses is when one is running Windows as a Virtual Machine under software such as Fusion or Parallels. I have assumed that you are running windows on a boot camp partition (from your posts) and therefore this does not apply to you.
Axel F.

Ram all used up?

So about a month ago, i started noticing that all of my ram was used up. I have 8 GB, and i have like 1% available at all time.
I today decided to format my 256 SSD harddrive, and reinstall Mavericks - and i then installed "Memory Clean" from App Store, and it tells me the same. As soon as i launch the program, it tells me i have about 10-300 MB Memory available.
What can this be? I'd rather try and fix this problem my self, as the nearest authorised Apple store is a very far away.
The computer can actually be used pretty normally, but as soon as i launch Netflix, Youtube videos in full screen etc. it just starts lagging really bad.
Programs open when i took the screenshots were Mail, iTunes, Chrome, Calender and Notes.. Nothing else
It looks like Google Chrome is taking up a ton of activity on my computer - what can it be?
After re-installing my computer, i restored all my Chrome extensions, bookmarks etc.
EDIT: I just tried closing chrome and it immidieatly gave me more GB. So what do i have to clean out in Chrome? Right now i have Chrome open with hthis forum, and i still got like +3GB available..

From what I read, this is normal for Mav OS. Just because it is using this ram, doesn't mean it isn't free to be allocated somewhere else.
Mav uses ram better than any other Mac OS previous. It does however appear to allways run you low on ram but in fact, its the opposite. It pumps ram into the apps you currently have open becuase it knows you will be swapping back and forth.
Once you open another program, tab in chrome, etc the allocation will be there. Mavericks now has a memory compression feature that will compress the memory occupied by applications that aren't being actively used and give the freed up RAM to the application that needs it the most. The result is a much more responsive system and less memory being dumped to a swap file to the HDD which is what reduces the performance of your Mac.
http://www.apple.com/osx/advanced-technologies/
Resources:
https://discussions.apple.com/thread/5470580?tstart=0
https://discussions.apple.com/message/23749393#23749393
http://arstechnica.com/apple/2013/10/os-x-10-9/17/#compressed-memory

Which RAM U use to overclock ?

Hey guys,
I wanna ask you, which RAM you use to overclock.
I wanna buy a new Kit, but i cannot decide me.
2x512mb OCZ EL 4000 Gold Rev. 2
or
2x512mb Crucial Ballistix
can anyone help me to choose?
bevore i had 2x512mb OCZ Platinum EB 3500@ 245 with 2,5-4-4-9 1T they worked great but my K8N Diamond can not more vdimm than 2,85
i wanna overclock my 3700+ San Diego (he make 2902mhz)
Thanks Kai

Here is a link to MSI's list of supported memory for your motherboard.
http://www.msi.com.tw/html/products/mainboard/testreport_pdf/7100/memory.pdf
Here is a link to the forum that can also furnish you info on different memory that can be used on your motherboard.
https://forum-en.msi.com/index.php?topic=81611.0

SQL query returns few rows, but holds on with several Gbs of RAM memory used

If I perform the following query:
SELECT d.DocumentGUID, d.DocumentID
FROM ImportDataBase.dbo.Document d
LEFT OUTER JOIN ContentDataBase.dbo.Document d2 ON (d.DocumentGUID = d2.DocumentGUID)
WHERE ( d2.DocumentGUID IS NULL ) -- new document in the ImportDB
OR ( d2.DocumentGUID IS NOT NULL AND d.QueryContent <> d2.QueryContent ) -- modified document in the ImportDB
It returns around 1000 rows and takes about 3 minutes to complete
It also raises up the RAM memory used from 2GB to 9GBs.
This memory used will remain used untill I restart the server. I have no need to make use of that memory, I already copied the returned rows of that query into a note pad for example. And any other reason of SQL has to to keep that memory stored by
that query, I dont want it.
Is there a way to release that memory I really dont need my SQL server to keep, without having to restart the SQL server?
and without topping the max memory the sql server uses, since I need my SQL server to use as much as it needs in other tasks(I dont think it needs to hold on to the above query memory used)
Thank You very much.

Is there a way to release that memory I really dont need my SQL server to keep, without having to restart the SQL server?
and without topping the max memory the sql server uses, since I need my SQL server to use as much
A query can be resource intensive even if it returns a single row. Generally it is a good idea to set SQL Server MAX memory.
BOL: "Optimizing Server Performance Using Memory Configuration Options
The memory manager component of Microsoft SQL Server eliminates the need for manual management of the memory available to SQL Server. When SQL Server starts, it dynamically determines how much memory to allocate based on how much memory the operating system
and other applications are currently using. As the load on the computer and SQL Server changes, so does the memory allocated. For more information, see Memory Architecture.
The following server configuration options can be used to configure memory usage and affect server performance:
•min server memory
•max server memory
•max worker threads
•index create memory
•min memory per query
The min server memory server configuration option can be used to ensure that SQL Server does not release memory below the configured minimum server memory once that threshold is reached. This configuration option can be set to a specific value based on the
size and activity of your SQL Server. If you choose to set this value, set it to some reasonable value to ensure that the operating system does not request too much memory from SQL Server, which can affect SQL Server performance.
The max server memory server configuration option can be used to specify the maximum amount of memory SQL Server can allocate when it starts and while it runs. This configuration option can be set to a specific value if you know there are multiple applications
running at the same time as SQL Server and you want to guarantee that these applications have sufficient memory to run. If these other applications, such as Web or e-mail servers, request memory only as needed, then do not set the max server memory server
configuration option, because SQL Server releases memory to them as needed. However, applications often use whatever memory is available when they start and do not request more if needed. If an application that behaves in this manner runs on the same computer
at the same time as SQL Server, set the max server memory server configuration option to a value that guarantees that the memory required by the application is not allocated by SQL Server."
LINK:
http://technet.microsoft.com/en-us/library/ms177455(v=sql.105).aspx
Memory configuration:
http://www.sqlusa.com/bestpractices/memory-configuration/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Can I set Acrobat X to increase the proportion of my PC's RAM it uses?

Can I set Acrobat X to increase the proportion of my PC's RAM it uses, in order to speed up OCR processing? Currently, it uses up to 25% of my PC's RAM when OCR processing but I would like to increase this in order to complete OCR jobs more quickly.

Short answer: no.
Long answer: a very few programs can use multiple cores. To do this, they have to split up and run themselves as multiple separate programs (in effect). This is only really suitable when either
(a) two entirely different things need to be done or
(b) a job can be split up into a lot of identical jobs, and all done at the same time.
Photo editing and video editing are the obvious cases of (b), since they have to repeat the same stuff over each bit of a picture, and a picture could be done in slices. Making programs run on multiple cores is awesomely complicated (especially if they previously didn't) but it's no coincidence that Adobe Photoshop and (I think) Adobe Premiere Pro - being image and video editors - are out there using multiple cores.
OCR doesn't lend itself to this terribly well (since the entire page is context), but what could work well is a program which is designed to do OCR on multiple files; it could split up and do them at the same time. Acrobat isn't that kind of high end program, however, it's meant for desktop users doing one thing at a time.

A little help with RAM please...

Okay, I'm just going to say - I'm noobing this up and can't figure out what to buy, or do, to get what I want.
I just picked up a cheap Intel Core Duo 2 E8200 for my office PC:
MSI Neo3 P45 FR
(old CPU) Intel Pentium Dual Core E2180
OCZ Reaper HPC Edition 2x1GB DDR2800 4-4-4-15 @ 2.1v (stock settings)
http://www.ocztechnology.com/products/memory/ocz_ddr2_pc2_6400_reaper_hpc_edition
Seagate 500GB 7200.12 SATA II HDD
Radeon HD 4850 512MB
(that should be all the info needed for my problem.)
When I had the E2180, I ran the RAM fine at 800mhz in Dual Channel. I got a WEI of 5.0 for the CPU and 5.0 for the RAM. When I upgraded my processor, the processor runs at 1333FSB (333mhz) and my WEI jumped for the CPU 6.2 and 5.5 for the RAM. I'd like (if possible) to get this RAM to run a bit faster, or buy RAM that will match my CPU 1:1 if possible.
I read the stickie above about DDR2 1066 RAM and how some is OC'ed DDR2 800. I take it my RAM is OC'ed stock because of the 2.1v requirement. What RAM would you guys recommend to reach 1333mhz to match my CPU? And how can I determine for future reference what RAM would be able to match it since I saw they don't sell DDR2 1333?

Hey guys, hey.
I've been away and sort of busy, but have tried some of the recommendations about using my RAM.
I ran into another wall. I guess my motherboard is designed for 1.8v RAM, I have 2.1v RAM. I can't seem to mess around with the timings or stuff without it BSODing, not posting, or not booting into Windows 7.
Is there any info on 2.1v RAM being used on a 1.8v motherboard? I wanted to upgrade the RAM, had a spare set of 2x1GB RAM, but I can't get it to post with more than 3 sticks, and I can't get windows to boot with more than 2 sticks. At this point it more of an experiment than raw performance.
RAM:
Set 1 (currently in, working fine no issues, timings set manually, voltage set manually)
OCZ 2x1GB DDR2 800 2.1v 4-4-4-15
Set 2 (just lying round, it use to BSOD me a lot, never figured out why, swapped it out, PC worked fine, RAM was used in another computer worked fine, timings/volts always set manually)
Corsair 2x1GB DDR2 800 2.1v 4-4-4-12
Note: I tried this RAM by itself again, it posted, loaded up Windows, but I didn't try it long enough to see if it would BSOD me. Without settings set manually or all on auto, system wouldn't POST just endless on-off cycle.
System:
Windows 7 HP
Intel E8200 - Stock
Seagate 7200.12 500GB
MSI HD 4850 512mb (first revision)
MSI P45 Neo3-FR r1.0 Bios 1.9
Antec 12EPV TruPower 550 (33A @ single rail 12v)
Onboard audio/LAN
Lite-On SATA multi-drive
Like I said, at this point it is an experiment. With the economy I'd like to squeeze a little more juice if possible out of my Rig, if not it will have to wait till I can upgrade to a Lynnfield.

My iPhone 4s keeps showing more space being used for photos than i have - i have deleted cache folders, unselect and reselect in iTunes and nothing appears to work my iPhone still shows 6.5 gig use of photos when i only have the camera roll listed

my iPhone 4s keeps showing more space being used for photos than i have -
i have deleted cache folders, unselect and reselect in iTunes I read one post
where they said keep syncing and in a couple days it would correct itself, that
hasnt happened. I have see others have the same issue but no solution and nothing
appears to work my iPhone still shows 6.5 gig use of photos when i only have the camera roll listed

i thought the photo stream only holds 1000 i usuaaly take each month and save them to iphoto but if thats the my ipad should say the same amount and it doesnt - it shows 2.5 gig which is correct for iphoto. and i havent ever had that much but if for some reason icloud has that much saved how do i delete and again if it does why doesnt ipad show that amount _ HELP!

HELP. More RAM installed, more RAM is used!

Similar Messages

Maybe you are looking for