Help, mostly with rendering size, not file size, actual size

I made a short 4 second movie in after effects cs5, there are really no fancy effects, just a car with wheels turning driving across the screen, the size is super small at 167px width x 315px height. It's 30 fps. It's from a set of three, I have no major issues with the other two but for some reason, when I render this one, it comes out super blurry/pixelated and the size is twice of what it should be, it's not too size of how I built it, and I can't resize it. I think it looks so bad because it isn't coming out the right size, but I can not for the life of me figure out why. This is for my job, and I have to show it to the higher ups so I need it to look as crisp as possible. Any ideas what would make this happen? I've rendered so many different times, i brought it into Adobe media encoder, I feel like I am just missing some little switch, but can't find it. I render quicktime as an animation, it's so small, it doesn't matter if I do animation. I've tried at the default settings of best and lossless, I've changed things, I am not sure what else I should do, anybody have any insight? I can provide more info if needed, thanks so much in advanced!

167x315 is your comp size for all three comps and you know this absolutely.
Your render settings are exactly the same for each of the three comps and you know this absolutely.
You shoudl be able to examine the properties of the output movies by either brining them back into AE or using the inspector in QT. Each will show a movie size and a display size. A tiny movie, like 167x315, will look awful if played at normal viewing size of 640x480 because it will be scaled up by twice, each pixel will be four times its native size. That can happen when a flag gets set in QT to display a movie at full screen size which is different from the falge that sets it to display full size.
Double check everything.
You shoudl be able to render out comp 1, which is good, and then dleete everything in comp 1 and fill it up with stuff copied and pasted out of comp 3. Then you use the exact same render settings again.

Similar Messages

Can you guys help me with a size issue?

I have problems with the size of the letter, when I put for example 3 pt it changes to 300.000 pt, and I don't know what to do. Plis HELP ME

niza,
You may try the list:
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Help needed with layers and project files....

Hello
I am new to after effects so this might be a simple issue for most. I am having an issue with my layers not matching the files in my project window. I accidently deleted a comp file the other day so I had to remake a few layers but they are not showing up in the project window/solids folder. I have 5 layers on my timeline and only 4 files in the project/solids folder. Some of the files names do not match the ones in the timeline. Is there a way to create a new comp with the files that I have open in my timeline or to replace the ones in the project window? I started a project a few days ago, Im trying to make a few partical orbs dancing on there own path then they will come together and then creates a few smaller ones. Im at the point where I want to copy one comp to another or copy the layers over but the particals follow one light instead of the original light from its own comp. I think the file names in the project window might be the issue but I really don't know. Any help or comments would greatly be appreciated
Thanks a million
Adam
Using trapcode particular and AE CS6
Windows system

Layers on the timeline are just instances of the source footage. If you rename them on the timeline, that won't affect the number or naming of the sources in the project window. Toggle the column header in the TL to see which laywer uses which source.
Mylenium

Need help in URI scheme is not ¨file¨ error in uploading .PDF file

I am getting the URI scheme is not file error when I am uploadin a .PDF file
I am using the following piece of code
String lPathPrefix = "gopher://muceap10.muc.amadeus.net/User Step Folders/BPS_Files/Outlooksoft CPM/01 - Production Environment/01 - Documentation Library/01 - Documents/Daily_Checks/";String lPath = (lPathPrefix + doccolvalue).replace(" ", "%20");
URI lURI = new URI(lPath);String lPathPrefix = "file://muceap10.muc.amadeus.net/User Step Folders/BPS_Files/Outlooksoft CPM/01 - Production Environment/01 - Documentation Library/01 - Documents/Daily_Checks/";
String lPath = (lPathPrefix + doccolvalue).replace(" ", "%20");
URI lURI = new URI(lPath);
Can anyone please help me in solving this problem
I will be very much greatful to you,
Thankx.

Did you get to resolve this error? We are also getting the same error and not able to figure out.
Edited by: Joe A on Nov 10, 2008 5:09 PM

NEED HELP: Problem with Canvas Size in Crystal design/report.

Hello,
I am having some trouble with one of my reports, the canvas size is so much bigger than my design/report, which is causing it to preview really small. I have gone into the document properties and tried to change those settings, I have also used the tools to try to make the canvas size smaller, it seems as thought nothing is really working. When I use those tools it cuts off part of my report and also adds huge scroll bars into my design... Does anyone have any insight on this? It would be a great help.
Thank you,
Kerry Jenkins
Harte-Hanks Analyst

Hi Kerry,
Are you using Crystal Reports Designer or BusinessObjects designer ( what ever it was called ) Crysstal Reports 5 was released in the summer of 1997 and definitely did not support a flash file.
Need more info and details on the versions you are using and info on the Clients portal, Is it Businessobjects Enterprise 5.1?
Thank you
Don

Urgent Help Wanted With My Presentation - Mov Files Will Not Open

I am a retired lifeboatman, and have developed a fund raising talk focusing on my 35 year involvement with saving lives off the UK southern coast. I use Keynotes and have never had a problem, until now. I have another talk next week and thought I would update the presentation. I have updated to Mavericks and also the latest Keynotes 6.0.1. When I went to play the presentation, it informed me that some of the .mov files needed to be updated to run on QuickTime. I pressed the convert button, only to be informed that most of the files could not be upgraded. When I try to play again, all I get is a blank black screen. I closed Keynotes and reopened the file in version 5.3, but still the same problem occurred . Most of my video files are of actual rescues and have been transferred from old VHS tapes. and are invaluable to me. It also means my presentation next week will be without the powerful impact these rescue videos present. I have searched through the support communities and also on the web, and have tried various suggestions and trial programs for converting the files, but none have been able to provide me with any playable video. Can anyone please help me to overcome this problems? Any help would be gratefully received.

It's never a good idea to change operating systems and applications without fully testing over a period of time with existing work files first. As Mavericks is such a new operating system, there are a few quirks that are still in place compared to its predecessors.
Many video types do not play in the new Quicktime 10 player that is included with Mavericks, but version 7 should play any type. Down load and install QuickTime player version 7 for Mavericks, this is a much better movie player than the simple version now included with Mavericks from here: Download Apple QuickTime Player version 7
Open the video file in QT 7 and check the video plays correctly.
Let me know the CODEC used, it is listed against Format in the QT Inspector, (command I or Window > show movie inspector)
In theory Keynote should now play your video again but let me see how you get on.

Need help: Problems with exported Dreamweaver html file in different browsers

I'm trying to send out a newsletter, and had our designer create it in Dreamweaver, and then export and html file which we uploaded. For some reason it looks wrong on Mac's, Gmail, and a few issues with Outlook. Does anyone know how to help with this, or had to work around this problem in the past?
I've attached our html file as well.
We're an eco startup with limited time and budget - so any help you have would be so appreciated.
Thank you!!

      World Centric Monthly Newsletter   August 2009
Palo Alto Joins the Ban Against
         Non-Recyclable Materials
       This Spring, Palo Alto joined the list of more than 30 cities and counties in California who are making good on their efforts toward reducing their greenhouse gas emissions
       by enacting partial or comprehensive bans on polystyrene (PS) foam and/or non-recyclable disposable foodservice containers. Around the same time, a California statewide ban on the use of PS containers was tabled before reaching the State Assembly floor. Representative
       Jerry Hill, one of AB 1358’s sponsors, pulled the bill due
       to concerns addressed in the Appropriations committee hearing of the bill, regarding the fiscal impacts which
       were not addressed in bill’s contents.
       Largely represented by the California Restaurant Association, opponents of AB 1358 lobbied legislative representatives and argued there would be a negative fiscal impact on struggling restaurant owners and their customers in order to accommodate the more expensive alternatives to PS containers.     There are the unquantifiable and “hidden” costs of contaminating our bodies and environment which would far surpass the fiscal impact on the plastics, restaurants and consumer industries. Studies published by the Foundation for Advancements in Science and Education have indicated that varying levels of styrene residues
         are present in 100% of all human fat tissue in the
         United States, as PS products are found to lose weight after in contact with hot or fatty/acidic foods and liquids, causing migration of the styrene into the food or fluid, ending up in the human body. On the high end, the levels were “one third of levels known to cause neurotoxic symptoms”. In the environment,
         PS is rarely recycled and does not biodegrade.     Supporting safer alternatives to polystyrene, in addition to the collection infrastructure and processing mechanisms for the compostable and recyclable products would help create more green jobs in the long run and would be a move in the right direction away from unnecessary harm
       to our health, our communities and our world. Keep your eyes open for a revised version of AB 1358 in Spring 2010!     For more information about polystyrene
       visit Earth Resource.     For a partial energy, emissions and water analysis
       of polystyrene and its alternatives visit our website.           World Centric Compostable
         Hot Cup Lid
         World Centric is pleased to announce we now offer a fully compostable hot cup lid that
         fits our 10oz, 12oz, 16oz,
         and 20oz paper hot cups.
       The lids can be ordered in cases of 1000 or packs of 100.
       For more information or to order, please visit our website.           This Month
         We’d Like to Applaud
       Project Open Hand
       San Francisco's non-profit
       organization that prepares and delivers food to seniors, people living with HIV and homebound critically-ill residents. For nearly 25-years Project Open Hand has been providing “meals with love” to local residents in need of help and care in
       California’s San Francisco and Alameda counties.
       Programs include meals, groceries and nutrition information as well as education and referral programs
       for all of the people served. A staff dietitian also visits several sites per week to speak with seniors and critically ill local residents about the importance of eating well
       and staying healthy.
       Project Open Hand continues to serve nearly 800,000 annually and has served as a model for over 100 organizations across the United States and the world.
       If you are interested in making a donation,
       please visit Project Open Hand.
       Help Project Open Hand continue to do what it
       does best – deliver quality food to those in need.
“World Centric has gone
           about every aspect of
           business in the most
           sustainable of ways.
           It is a model for socially
           responsible business.”
           Ari Patz
           Styrophobia
               Industry Trends
           Although PLA is a sustainable alternative to a petrochemical-
           derived product, its limitation has
           been not only its cost, but its inability
           to maintain structural integrity in hot temperatures and humid conditions because of its low melting pint.
           However, researchers at Teijin
           (formerly in partnership with Cargill)
           have improved their plant-based
           ‘Biofront’ PLA polymer to be able
           to withstand higher temperatures –
           by modifying its hydrolytic resistance.
         Get more information here.
               Get Great Deals!
               Check out our clearence items.
               Did you know?
           Styrene can leach from polystyrene.
           Over the long term, this can act as
           a neurotoxin. Studies on animals
           report harmful effects of styrene
           on red-blood cells, the liver, kidney,
           and stomach organs.
           US Environmental Protection Agency (1992) “Styrene”. Air Toxics Website.
               Where to Find us:
               CRRA Conference
               August 2 - 5
               Palm Desert
                      Western Foodservice
& Hospitality Expo
             August 30 - September 1
          Livable Green
             September 19
San Mateo
   Find us:            World Centric
2121 Staunton Ct. Palo Alto, CA
You are subscribed as <[email protected]>. Click here to manage your email subscription preferences.
Click here or reply to this email with 'unsubscribe' in the subject to unsubscribe from this list or if you feel you have received this message in error.
This message was sent from World Centric 2121 Staunton Ct Palo Alto CA 94306 United States. Click here to report email abuse.
You are subscribed as <[email protected]>. Click here to manage your email subscription preferences.
Click here or reply to this email with 'unsubscribe' in the subject to unsubscribe from this list or if you feel you have received this message in error.
This message was sent from World Centric 2121 Staunton Ct Palo Alto CA 94306 United States. Click here to report email abuse.

Please help me with a spectacularly corrupt file

Hey guys,
I've been working on a file all morning, saving constantly, when Fireworks CS6 crashed due to a memory error.
When I opened my file again, most of my progress was gone, but some of my progress was still there. For example, the nav bar I changed early in the morning on one layer was gone but recent images I imported in another layer was there. It's all very random.
Thing is, I can still see my complete design when I open the file in Mac's (Mountain Lion) Preview so I suspect all my layers are still somehow in the file.
A further twist -- I used Time Machine to retrieve versions of my file BEFORE the crash happened. But when I opened it in Fireworks, they're all corrupt too (though they still show the actual design in Preview)
Is there a way to repair my file? Is there something broken with Fireworks itself that I can't even open the older files properly?

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also... See Here... in particular #3...
Troubleshooting applications purchased from the App Store

Please help me with this 'did not respond' problem.

So, I too have this same old 'user did not respond' problem. I know there are lot of similar problems but this was the last thing left to do – post here. So, audio and video are not working.
My setup:
ADSL-line -> A-Link RoadRunner 44E –modem --(wired)--> Airport Express –(wireless)--> My PowerBook
More information about the modem can be found here: http://www.a-link.com/uk/RR44.html?id=H4phxx3p
A-Link:
IP = 10.0.0.2
Subnet = 255.255.255.0
NAT = Enabled (only way to get AirTunes to work)
Firewall = Disabled
Port forward = Disabled (tried it but no difference)
DHCP = Enabled 10.0.0.3-10.0.0.99 Subnet 255.255.255.0
UPnP = Don’t have it
Airport Express:
IP = 10.0.0.3
Subnet = 255.255.255.0
NAT = Disabled
DHCP = Disabled
PowerBook (10.4.4):
IP = 10.0.0.22 (using dhcp)
Subnet = 255.255.255.0
Firewall = Off (On or off no difference. Yes, I added all the necessary ports)
QuickTime Streaming Speed is set to match my Download
iChat > Preferences > Video Section > Bandwidth Limit is set to NONE
Tried 10.4.4 combo installer but no luck.
Everything else works (Internet, Skype, AirTunes…) and I can text chat in iChat. I don’t know what else to try anymore . By-the-way this has worked with these same settings one time before, then it went dead. Don’t understand…
I tried to connect and this is what /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7 had to say (looong and some is in finnish):
PowerBook-Ville:~ ville$ /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7
185350.100130 Loading hardware rules from hardwarerulesH264-G4.plist
185350.101435 Checking H264 hardware rules
185350.101926 Satisfied rule #4 (30:160x120)
185350.102967 setLocalUserName: Ville @10.0.0.22
185350.143698 ### NEW STATE: to: VC_INIT, from: VC_INVALID
185350.145859 ### NEW STATE: to: VC_IDLE, from: VC_INIT
185350.146389 ++++++++ confStatusMapRemoveAll
185350.146662 ( ) -- mapUserIDToSecurityInfo cleared --
185350.147441 UPnP init passed
185350.150244 NATTraversal created
185350.151282 Bandwidth based on QT prefs = 384
185350.167948 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
185350.168679 BWD bandwidth: 445 kbits up, 468 kbits down.
185350.168965 videoNetworkCapable: 1 -- 3 max participants.
185350.169148 audioNetworkCapable: 1 -- 9 max participants.
185350.169400 vcCapabilities returns: 0x0000001f
185350.169914 VCCapAudio
185350.170480 VCCapVideo
185350.172530 VCCapMultiAudio
185350.173351 VCCapMultiVideo
185350.173632 VCCapMultiAudioHost
185609.538404 Microphone: callback thread: STANDARD; EXTENDED timeshare: 0; PRECEDENCE importance: 17
185609.538585 Microphone: null device thread: STANDARD; EXTENDED timeshare: 0; PRECEDENCE importance: 17
185609.583711 Microphone devices:
185609.583779 Camera_HasAudio = 0
185609.586286 iSight Sisäänrakennettu
185609.586693 Sisäinen mikrofoni
185609.586740 Linja sisään
185609.604815 Selected mic: Sisäänrakennet / imic
185609.683890 SIPManager init
185609.700807 selectedCamera returned iSight
185609.972619 Microphone devices:
185609.973469 Camera_HasAudio = 0
185609.973961 iSight Sisäänrakennettu
185609.975015 Sisäinen mikrofoni
185609.975690 Linja sisään
185609.978111 Microphone devices:
185609.978692 Camera_HasAudio = 0
185609.979612 iSight Sisäänrakennettu
185609.980640 Sisäinen mikrofoni
185609.981305 Linja sisään
185609.984519 Microphone devices:
185609.985590 Camera_HasAudio = 0
185609.986262 iSight Sisäänrakennettu
185609.989338 Sisäinen mikrofoni
185609.990224 Linja sisään
185609.993780 Microphone devices:
185609.999644 Camera_HasAudio = 0
185610.000253 iSight Sisäänrakennettu
185610.001371 Sisäinen mikrofoni
185610.002618 Linja sisään
185610.004677 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
185610.005235 BWD bandwidth: 445 kbits up, 468 kbits down.
185610.005539 videoNetworkCapable: 1 -- 3 max participants.
185610.005750 audioNetworkCapable: 1 -- 9 max participants.
185610.006038 vcCapabilities returns: 0x0000001f
185610.006306 VCCapAudio
185610.006494 VCCapVideo
185610.006670 VCCapMultiAudio
185610.006830 VCCapMultiVideo
185610.006999 VCCapMultiAudioHost
185610.017356 Camera_HasAudio = 0
185610.018534 Diffusion prefilter disabled
185610.019653 Temporal prefilter disabled
185610.020353 startPreview returned 0
185610.246234 VCDelegate conforms to VideoConferenceDelegate protocol.
185610.246504 setLocalUserName: [email protected]
185610.246738 ( ) setValidatedIdentity: [00000000]
185610.484041 Updating local frame notification.
185610.505527 Found 1 cameras:
185610.506223 iSight - 2857630788957422
185610.506822 selectedCamera returned iSight
185610.509889 Microphone devices:
185610.510561 Camera_HasAudio = 0
185610.511032 iSight Sisäänrakennettu
185610.512038 Sisäinen mikrofoni
185610.512794 Linja sisään
185610.513875 Selected mic: Sisäänrakennet / imic
185610.515986 Found 1 cameras:
185610.538016 iSight - 2857630788957422
185610.541768 selectedCamera returned iSight
185610.544617 Microphone devices:
185610.545694 Camera_HasAudio = 0
185610.546398 iSight Sisäänrakennettu
185610.547749 Sisäinen mikrofoni
185610.549249 Linja sisään
185610.550480 Selected mic: Sisäänrakennet / imic
185610.566895 Found 1 cameras:
185610.567504 iSight - 2857630788957422
185610.567942 selectedCamera returned iSight
185610.598208 Microphone devices:
185610.598987 Camera_HasAudio = 0
185610.599405 iSight Sisäänrakennettu
185610.600395 Sisäinen mikrofoni
185610.605420 Linja sisään
185610.606595 Selected mic: Sisäänrakennet / imic
185610.887059 SNATMAP Configuration Data: snatmap://snatmap.mac.com:5678
185610.887146 acquireSNATMAPConfigurationProc: Refresh UPnP status via SIP
185610.887587 SIPUpdateExternalInfo, force = 0
185610.887993 Transport(UDP) Thread start...
185610.922366 Sending SNATMAP heartbeat to 11FAF895:5678
185611.034312 Microphone devices:
185611.034395 Camera_HasAudio = 0
185611.034563 iSight Sisäänrakennettu
185611.034772 Sisäinen mikrofoni
185611.034808 Linja sisään
185611.036584 Microphone devices:
185611.036629 Camera_HasAudio = 0
185611.036712 iSight Sisäänrakennettu
185611.036907 Sisäinen mikrofoni
185611.036942 Linja sisään
185611.038972 Microphone devices:
185611.039013 Camera_HasAudio = 0
185611.039118 iSight Sisäänrakennettu
185611.039377 Sisäinen mikrofoni
185611.039418 Linja sisään
185611.040876 Microphone devices:
185611.040908 Camera_HasAudio = 0
185611.040979 iSight Sisäänrakennettu
185611.041128 Sisäinen mikrofoni
185611.041158 Linja sisään
185611.043801 Microphone devices:
185611.043860 Camera_HasAudio = 0
185611.043968 iSight Sisäänrakennettu
185611.044153 Sisäinen mikrofoni
185611.044187 Linja sisään
185611.045709 Microphone devices:
185611.045744 Camera_HasAudio = 0
185611.045814 iSight Sisäänrakennettu
185611.046424 Sisäinen mikrofoni
185611.046468 Linja sisään
185611.048000 Microphone devices:
185611.048038 Camera_HasAudio = 0
185611.048116 iSight Sisäänrakennettu
185611.048312 Sisäinen mikrofoni
185611.048345 Linja sisään
185611.053033 Microphone devices:
185611.053109 Camera_HasAudio = 0
185611.053228 iSight Sisäänrakennettu
185611.053932 Sisäinen mikrofoni
185611.053984 Linja sisään
185611.055690 Microphone devices:
185611.055733 Camera_HasAudio = 0
185611.055818 iSight Sisäänrakennettu
185611.055982 Sisäinen mikrofoni
185611.056014 Linja sisään
185611.057544 Microphone devices:
185611.057577 Camera_HasAudio = 0
185611.057648 iSight Sisäänrakennettu
185611.057800 Sisäinen mikrofoni
185611.057831 Linja sisään
185611.059749 Microphone devices:
185611.059791 Camera_HasAudio = 0
185611.059872 iSight Sisäänrakennettu
185611.060046 Sisäinen mikrofoni
185611.060077 Linja sisään
185611.061622 Microphone devices:
185611.061659 Camera_HasAudio = 0
185611.061732 iSight Sisäänrakennettu
185611.061883 Sisäinen mikrofoni
185611.061913 Linja sisään
185611.063394 Microphone devices:
185611.063428 Camera_HasAudio = 0
185611.063497 iSight Sisäänrakennettu
185611.063643 Sisäinen mikrofoni
185611.063672 Linja sisään
185611.066617 Microphone devices:
185611.066673 Camera_HasAudio = 0
185611.066776 iSight Sisäänrakennettu
185611.067227 Sisäinen mikrofoni
185611.067271 Linja sisään
185611.068950 Microphone devices:
185611.068987 Camera_HasAudio = 0
185611.069074 iSight Sisäänrakennettu
185611.069268 Sisäinen mikrofoni
185611.069303 Linja sisään
185611.070700 Microphone devices:
185611.070729 Camera_HasAudio = 0
185611.070797 iSight Sisäänrakennettu
185611.070943 Sisäinen mikrofoni
185611.070972 Linja sisään
185611.073651 Microphone devices:
185611.073709 Camera_HasAudio = 0
185611.073900 iSight Sisäänrakennettu
185611.074105 Sisäinen mikrofoni
185611.074137 Linja sisään
185611.077101 Microphone devices:
185611.077164 Camera_HasAudio = 0
185611.077282 iSight Sisäänrakennettu
185611.077535 Sisäinen mikrofoni
185611.077574 Linja sisään
185611.079754 Microphone devices:
185611.079804 Camera_HasAudio = 0
185611.079903 iSight Sisäänrakennettu
185611.080082 Sisäinen mikrofoni
185611.080115 Linja sisään
185611.081523 Microphone devices:
185611.081552 Camera_HasAudio = 0
185611.081618 iSight Sisäänrakennettu
185611.081762 Sisäinen mikrofoni
185611.081792 Linja sisään
185611.121455 Microphone devices:
185611.122034 Camera_HasAudio = 0
185611.122425 iSight Sisäänrakennettu
185611.124169 Sisäinen mikrofoni
185611.125123 Linja sisään
185611.127666 Microphone devices:
185611.128187 Camera_HasAudio = 0
185611.128587 iSight Sisäänrakennettu
185611.129647 Sisäinen mikrofoni
185611.130244 Linja sisään
185611.132819 Microphone devices:
185611.134250 Camera_HasAudio = 0
185611.135216 iSight Sisäänrakennettu
185611.136205 Sisäinen mikrofoni
185611.136834 Linja sisään
185611.139475 Microphone devices:
185611.139950 Camera_HasAudio = 0
185611.140296 iSight Sisäänrakennettu
185611.141079 Sisäinen mikrofoni
185611.141615 Linja sisään
185611.166215 SNATMAP heartbeat resulted in IP change (from: 0 to: C1E5E663)
185611.166278 SNATMAP heartbeat resulted in port change (from: 0 to: 5060)
185612.167249 UPnP not found (-3)
185612.171190 SIPUpdateExternalInfo, force = 0
185612.171685 count of local IP's = 2
185612.171957 LOCAL: ifname=[external], IP=[193.229.230.99], PORT = 5060
185612.172156 LOCAL: ifname=[en1(IPv6)], IP=[fe80:0005:0000:0000:0214:51ff:fe7d:9c80], PORT = 5060
185612.172352 LOCAL: ifname=[en1], IP=[10.0.0.22], PORT = 5060
185612.173468 LOCAL: ifname=[en1~], IP=[245.255.255.233], PORT = 5060
185622.137382 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
185622.138294 BWD bandwidth: 445 kbits up, 468 kbits down.
185622.138712 videoNetworkCapable: 1 -- 3 max participants.
185622.139590 audioNetworkCapable: 1 -- 9 max participants.
185622.140080 vcCapabilities returns: 0x0000001f
185622.140369 VCCapAudio
185622.140561 VCCapVideo
185622.140722 VCCapMultiAudio
185622.140873 VCCapMultiVideo
185622.142572 VCCapMultiAudioHost
185622.156043 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
185622.156628 BWD bandwidth: 445 kbits up, 468 kbits down.
185622.156950 videoNetworkCapable: 1 -- 3 max participants.
185622.157183 audioNetworkCapable: 1 -- 9 max participants.
185622.157453 vcCapabilities returns: 0x0000001f
185622.157698 VCCapAudio
185622.157875 VCCapVideo
185622.158024 VCCapMultiAudio
185622.158272 VCCapMultiVideo
185622.158449 VCCapMultiAudioHost
185622.165188 Invoke delegate method vcc:initiateConferenceStartedForParty:(tapiopihlava2)
185622.165935 ### NEW STATE: to: VC_SIGNALING, from: VC_IDLE
185622.166598 initiateConferenceCallUsingRemoteIPAndPortData - start
185622.167128 [ipAndPortData length] = 160
185622.167895 Length is valid: YES
185622.168283 CALLEE: ifname=[external], IP=[80.223.48.120], wPort = 5060
185622.168547 CALLEE: ifname=[en0(IPv6)], IP=[fe80:0004:0000:0000:020d:93ff:fec2:a986], wPort = 5060
185622.168809 CALLEE: ifname=[en0], IP=[192.168.0.103], wPort = 5060
185622.169066 ( )( )( ) ---- <nil> valid returned 0
2006-02-06 18:56:22.170 iChat[890] IPAndPortList: ({ip = "80.223.48.120"; port = 5060; }, {ip = "192.168.0.103"; port = 5060; })
185622.170164 =========== OpenPorts!
185622.362532 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
185622.364353 BWD bandwidth: 445 kbits up, 468 kbits down.
185622.364681 videoNetworkCapable: 1 -- 3 max participants.
185622.364885 audioNetworkCapable: 1 -- 9 max participants.
185622.365149 vcCapabilities returns: 0x0000001f
185622.365391 VCCapAudio
185622.365562 VCCapVideo
185622.365711 VCCapMultiAudio
185622.365858 VCCapMultiVideo
185622.366002 VCCapMultiAudioHost
185622.656162 Public mapping: 193.229.230.99:16384
185622.879503 Public mapping: 193.229.230.99:16385
185623.444910 Public mapping: 193.229.230.99:16386
185623.860324 Public mapping: 193.229.230.99:16387
185623.874400
VideoConferenceFramework version 245.0 - 02102005 - Dec 15 2005
185623.875487 Checking H263 hardware rules
185623.876060 Satisfied rule #4 (30:1)
185623.877092 selectedCamera returned iSight
185623.884938 * Caller SDP *
185623.886009 v=0
o=ville 0 0 IN IP4 %RTP-IP%
[email protected]
c=IN IP4 %RTP-IP%
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio %ARTP-PORT% RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video %VRTP-PORT% RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO %ARTCP-PORT% VIDEO %VRTCP-PORT%
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185623.886877 SIPConnect start...
185623.889046 TAInviteClientProc Thread start...
185623.889850 ( )( )( )( )( ) TP IS BINARY? (0)
185623.890303 ( )( )( )( )( ) TP TEXT BODY (910) (484)
185623.890537 Send to 50DF3078:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 193.229.230.99;branch=z9hG4bK1386bfa62bd64505
Max-Forwards: 70
To: "tapiopihlava2" <sip:[email protected]>
From: "[email protected]" <sip:[email protected]>;tag=1532351692
Call-ID: 8145be4e-9731-11da-b767-f3451e6113c4@10-0-0-22
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 484
v=0
o=ville 0 0 IN IP4 193.229.230.99
[email protected]
c=IN IP4 193.229.230.99
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185624.392078 ( )( )( )( )( ) TP IS BINARY? (0)
185624.393194 ( )( )( )( )( ) TP TEXT BODY (910) (484)
185624.394457 Send to 50DF3078:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 193.229.230.99;branch=z9hG4bK1386bfa62bd64505
Max-Forwards: 70
To: "tapiopihlava2" <sip:[email protected]>
From: "[email protected]" <sip:[email protected]>;tag=1532351692
Call-ID: 8145be4e-9731-11da-b767-f3451e6113c4@10-0-0-22
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 484
v=0
o=ville 0 0 IN IP4 193.229.230.99
[email protected]
c=IN IP4 193.229.230.99
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185625.397658 ( )( )( )( )( ) TP IS BINARY? (0)
185625.398766 ( )( )( )( )( ) TP TEXT BODY (910) (484)
185625.399296 Send to 50DF3078:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 193.229.230.99;branch=z9hG4bK1386bfa62bd64505
Max-Forwards: 70
To: "tapiopihlava2" <sip:[email protected]>
From: "[email protected]" <sip:[email protected]>;tag=1532351692
Call-ID: 8145be4e-9731-11da-b767-f3451e6113c4@10-0-0-22
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 484
v=0
o=ville 0 0 IN IP4 193.229.230.99
[email protected]
c=IN IP4 193.229.230.99
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185625.892455 Dialog(CREATED) Match(STATUS) [8145be4e-9731-11da-b767-f3451e6113c4@10-0-0-22]=[8145be4e-9731-11da-b767-f3451 e6113c4@10-0-0-22], [1532351692]=[1532351692]
185625.893480 TAInviteClientProc Thread end(800B0017)...
185625.894096 SIPConnect stop(900A0015)...
185625.894489 SIPConnect start...
185625.895221 TAInviteClientProc Thread start...
185625.895918 ( )( )( )( )( ) TP IS BINARY? (0)
185625.896499 ( )( )( )( )( ) TP TEXT BODY (890) (474)
185625.896748 Send to C0A80067:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 10.0.0.22;branch=z9hG4bK21044bc52afe21a2
Max-Forwards: 70
To: "tapiopihlava2" <sip:[email protected]>
From: "[email protected]" <sip:[email protected]>;tag=1854864533
Call-ID: 82780e7a-9731-11da-b767-a80aaba613c4@10-0-0-22
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 474
v=0
o=ville 0 0 IN IP4 10.0.0.22
[email protected]
c=IN IP4 10.0.0.22
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185626.398285 ( )( )( )( )( ) TP IS BINARY? (0)
185626.399598 ( )( )( )( )( ) TP TEXT BODY (890) (474)
185626.400034 Send to C0A80067:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 10.0.0.22;branch=z9hG4bK21044bc52afe21a2
Max-Forwards: 70
To: "tapiopihlava2" <sip:[email protected]>
From: "[email protected]" <sip:[email protected]>;tag=1854864533
Call-ID: 82780e7a-9731-11da-b767-a80aaba613c4@10-0-0-22
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 474
v=0
o=ville 0 0 IN IP4 10.0.0.22
[email protected]
c=IN IP4 10.0.0.22
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185627.403907 ( )( )( )( )( ) TP IS BINARY? (0)
185627.407726 ( )( )( )( )( ) TP TEXT BODY (890) (474)
185627.408136 Send to C0A80067:5060 [INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 10.0.0.22;branch=z9hG4bK21044bc52afe21a2
Max-Forwards: 70
To: "tapiopihlava2" <sip:[email protected]>
From: "[email protected]" <sip:[email protected]>;tag=1854864533
Call-ID: 82780e7a-9731-11da-b767-a80aaba613c4@10-0-0-22
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 474
v=0
o=ville 0 0 IN IP4 10.0.0.22
[email protected]
c=IN IP4 10.0.0.22
b=AS:2147483647
t=0 0
a=hwi:70:1:1666
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1939560629
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 30:160:120:160:120
a=rtpID:-604506380
185627.897341 Dialog(CREATED) Match(STATUS) [82780e7a-9731-11da-b767-a80aaba613c4@10-0-0-22]=[82780e7a-9731-11da-b767-a80aa ba613c4@10-0-0-22], [1854864533]=[1854864533]
185627.898634 TAInviteClientProc Thread end(800B0017)...
185627.900651 SIPConnect stop(900A0015)...
185627.901212 SIP connect returned 21
185627.902477 SIPCloseCall start...
185627.902912 (SIP.c:3322) Cannot find call ID(2)
185627.903671 SIPCloseCall stop(800C0016)...
185627.904006 ### NEW STATE: to: VC_IDLE, from: VC_SIGNALING
185627.904247 ++++++++ confStatusMapRemoveAll
185627.904434 ( ) -- mapUserIDToSecurityInfo cleared --
185627.904619 Preparing to send VCInitiateConferenceCompleted
185627.904842 Invoke delegate method vcc:initiateConferenceCompletedForParty:(tapiopihlava2) - retcode: -8
185627.910736 SIPUpdateExternalInfo, force = 0
185627.911922 count of local IP's = 2
185627.912335 LOCAL: ifname=[external], IP=[193.229.230.99], PORT = 5060
185627.912559 LOCAL: ifname=[en1(IPv6)], IP=[fe80:0005:0000:0000:0214:51ff:fe7d:9c80], PORT = 5060
185627.912806 LOCAL: ifname=[en1], IP=[10.0.0.22], PORT = 5060
185627.912978 LOCAL: ifname=[en1~], IP=[245.255.255.233], PORT = 5060
185627.913185 sendPing: 80.223.48.120:5060
185627.913404 Sending SNATMAP heartbeat to 50DF3078:5060
185627.913731 Sending SNATMAP heartbeat to 50DF3078:5060
185627.914107 Sending SNATMAP heartbeat to 50DF3078:5060
185627.914425 sendPing: 192.168.0.103:5060
185627.914689 Sending SNATMAP heartbeat to C0A80067:5060
185627.915221 Sending SNATMAP heartbeat to C0A80067:5060
185627.915564 Sending SNATMAP heartbeat to C0A80067:5060
185634.876688 BWD: GotBandwidth: 445845/468686 (up/down) @[10.0.0.22:255.255.255.0]
185634.878098 BWD bandwidth: 445 kbits up, 468 kbits down.
185634.878441 videoNetworkCapable: 1 -- 3 max participants.
185634.879209 audioNetworkCapable: 1 -- 9 max participants.
185634.879652 vcCapabilities returns: 0x0000001f
185634.879945 VCCapAudio
185634.880129 VCCapVideo
185634.880285 VCCapMultiAudio
185634.880433 VCCapMultiVideo
185634.880574 VCCapMultiAudioHost
185638.106335 Connection closed from the child process
185638.115266 cancelPreview returned 0
185638.116545 MULTIPOINT VC_API OVERRIDE: endConference
185638.117034 userIDToCallIDMap count = 0
185638.117308 ++++++++ confStatusMapRemoveAll
185638.117511 ( ) -- mapUserIDToSecurityInfo cleared --
185638.222629 Found 1 cameras:
185638.223364 iSight - 2857630788957422
185638.223767 selectedCamera GUID returned iSight
185638.226179 Microphone devices:
185638.226723 iSight Sisäänrakennettu
185638.227581 Sisäinen mikrofoni
185638.228156 Linja sisään
185638.228705 Selected mic: Sisäänrakennet / imic
185638.229534 Found 1 cameras:
185638.229992 iSight – 2857630788957422
… The rest isn’t probably that important.
So what the dell is going on !? Could somebody pleeaaase help me? Pleaseeeee.
3.1.1 Mac OS X (10.4.4)

Hi
I made a couple of changes hope they work.
A-Link:
IP = 10.0.0.2
Subnet = 255.255.255.0
NAT = Enabled (only way to get AirTunes to work)
Firewall = Disabled>>>>>>>>>>>>>>>>>>>>>>>>>>Enable firewall
Port forward = Disabled (tried it but no difference)>>>>>>>Enable go here for info http://www.portforward.com/english/routers/port_forwarding/A-Link/roadrunner44b/ iChat.htm
DHCP = Enabled 10.0.0.3-10.0.0.99 Subnet 255.255.255.0
UPnP = Don’t have it
Airport Express:
IP = 10.0.0.3
Subnet = 255.255.255.0
NAT = Disabled>>>>>>Enable
DHCP = Disabled
PowerBook (10.4.4):
IP = 10.0.0.22 (using dhcp)
Subnet = 255.255.255.0
Firewall = Off (On or off no difference. Yes, I added all the necessary ports)>>>>>>>>>>>>>>Turn on and untick any ports you put in for iChat
QuickTime Streaming Speed is set to match my Download
iChat > Preferences > Video Section > Bandwidth Limit is set to NONE
Tried 10.4.4 combo installer but no luck.
Tony

Help needed with xml to flat file conversion

Hi all,
I am doing a webservice (SOAP) to file scenario. The file I get into the target directory is as below.
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_Test_interface xmlns:ns1="http://test_namespace.co.uk"><fieldA>0000012345</fieldA><fieldB></fieldB><fieldC>0010203040</fieldC><transaction_type>NEW</transaction_type><transaction_date>2011/08/21</transaction_date><sales data>PARTNERS (((119006.258 169077.102), (372718.323 77854.466, 371449.872 70783.383), (382225.17 73214.976, 398410.463 95156.636)))</sales data></ns1:MT_Test_interface>
But I want it to be a plain text file like below, not an xml file.
0000012345
0010203040
NEW
2011/08/21
PARTNERS
(((119006.258 169077.102), (372718.323 77854.466, 371449.872 70783.383), (382225.17 73214.976, 398410.463 95156.636)))
What are all the modules I need and also the parameters and their values please?
Any help is appreciated.
Thanks.
Ramesh.

Thanks guys.
My xml now is like this:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MT_test xmlns:ns1="http://test.co.uk">
- <REPORT>
<company_number>0000043239</company_number>
<transaction_type>CREATE</transaction_type>
<transaction_date>2011/08/21</transaction_date>
<sales_data>Partners (((119006.258 169077.102), (372718.323 77854.466, 371449.872 70783.383), (382225.17 73214.976, 398410.463 95156.636)))</Partners>
</REPORT>
</ns1:MT_test>
I am using the content conversion as below:
Recordset Structure: REPORT
Name: REPORT.addHeaderLine      Value: 1
Name: REPORT.fieldSeparator      Value: ,
Name: REPORT.endSeparator      Value: 'nl'
Name: company_number.endSeparator      Value: 'nl'
and I am getting the result as:
company_number,transaction_type,transaction_date,sales_data
0000043239,CREATE,2011/08/21,Partners (((119006.258 169077.102), (372718.323 77854.466, 371449.872 70783.383), 382225.17 73214.976, 398410.463 95156.636)))
But I want file like this:
company_number,transaction_type,transaction_date,sales_data
0000043239
CREATE
2011/08/21
Partners (((119006.258 169077.102), (372718.323 77854.466, 371449.872 70783.383), 382225.17 73214.976, 398410.463 95156.636)))
What will be the CC parameters please?
Many thanks.
Ramesh.

Can someone help me with compression of video files?

I am trying to compress some videos to put on my iPod video. I run them through QuickTime Pro 7 or whatever the latest one is, and I compress the file using the "movie to iPod" preset. When it finishes, it gives me the original .mov file which is huge still, and this other file that is about 1MB. then if I try to throw away the original file, the new one will not play. Why is isnt it just giving me a smaller file of the movie after compression?? I dont understand whats going on. If I wanted to put a movie on my iPod, do I have to keep the original file which is like 20GB? It doesnt seem right. PLEASE HELP ME!!!!!
Thanks

It should be part of the "save as" dialogue.
(Hinted streaming is an elephant.)
P.S. Try the QuickTime forum if you can't get it to work.

Help needed with application: "could not find the main class"

I am pretty new to java and am trying to figure out applications a bit now. The one im working on does run within my editor, but when i "test" it or try to run it from within a .jar file it returns a "could not find the main class" error.
I have a code similar to this:
public class user{
public static void main(String[] args){
new user();
public user{
Does this have to do with it? I've been trying to get this right for a couple of days now, I just wanna be able to run it (on either my pc or another) without starting the Editor.
Looking forward to receiving an answer..

It sounds like you are missing the Main-Class attribute in your manifest file. Create a file 'manifest.mf' with the following line 'Main-Class: user'
Then include that manifest in your jar:
'jar -cfm user.jar manifest.mf user.class'
Then run the jar: 'java -jar user.jar'
http://java.sun.com/docs/books/tutorial/jar/basics/mod.html

Please can kind person help me with uploading photos, not showing in finder!

Hello dear Apple users,
Please can any kindly souls offer advice at this busy time... I am trying to create a last-minute personalised gift for a beloved brother but have not yet succeeded in uploading my photos from this page:
http://www.bagsoflove.co.uk/estore/design/51?tid=26342844-7e27-4d27-a0ab-b841175 00ac2
I know it should be easy but when I hit upload and select my "photos" from drop down menu on left, there all my photos except the ones I carefully edited, saved and flagged in iPhoto earlier this evening- I have checked in iPhoto and they are still there, all flagged etc but not showing in finder. (grr!)
So I opened menu from iPhoto and clicked "make visible in Finder" option, saved them with distinctive names but they are still not coming up when I search those file names..
Please what else can I do?

You never access your photos in iPhoto using the finder - the iPhoto application totally replaces the finder for photos when you use it - you can select the photos in iPhoto and export to a desktop folder (see Exporting From iPhoto for export options) or you use the media browser available in every open/upload/attach window on the left under media==> photos ==> iPhoto - see How to Access Files in iPhoto for more details
LN

Need help ASAP with rendering problem. (CS 5.5)

Beginning two days ago, rendering became a problem. I cannot complete rendering without freezing. All obvious troubleshooting has been done except perhaps to reinstall Premiere Pro. Your thoughts?

Welcome to the forum.
When you say "rendering," do you mean Rendering for smoothest playback, or do you mean Export to an output file?
Do you get any error messages?
At what point on the Timeline, does the program quit?
What is at that point in the Timeline?
Good luck,
Hunt

Need Help ASAP with steps in repairing file

Im am currently recording a audio book at 48000 24bit mono (as requested by individual) and I need to do three things and I'm not sure if the order is important and if I have extra steps not needed. Three things needed repair clipping, delete noise and normalize to -0.1
I have been running the restore lightly clipped and it seems to work fine but I notice it reduces the amplitude (no problem) I know I can normalize. I also need to extrac the noise with which I can use noise reduction, then I need to noramalize everything. Are these the proper steps or should I be doing it differently and if so how and why. I am doing this out of the country right now and internet is very slow and irregular so I patiently await any response anyone may have.
Thank you so much....

Thank you for your input and suggestions. The language that we are recording is one that has many sounds that will peak unless we set the gain so low there would hardly be any sound at all. We are also in a area with many outside noises such as cars, motorcycles, construction work etc etc.
our sound booth is nothing more than
Mattresses put together to inclose the reader and this is one of our best situations we have been able to do so far, so as you can see there are many challenges that we face with each situation and area we have to work in. Thanks for your comments and suggestions we appreciate them.
Sent from my iPhone
My apologies for any typos

Help, mostly with rendering size, not file size, actual size

Similar Messages

Maybe you are looking for