Help!!!! motu 828 not working under 10.4.3

i have a motu 828 external firewire soundcard - and it stopped working after upgrading to os 10.4.3!!!!! anyone got any advice regarding this problem? the motu pages don't refer to this problem and i can't find anyone having the same problem... the motu driver is in version 1.2.5 since april or something- they say it should be tiger compatible- have there been any technical changes in 10.4.3 regarding audio driver technology???? maybe it's not 10.4.3 but some rare configuration problem.. please HELP! i need to use my motu card and have a lot of stress because of this!!!!!!
clemens

I'd try using your card on another machine if you possibly can. It's just possible that the card has just died and it has nothing to do with your software.
If that's not possible, you might try looking at your system log to see if it show any errors when you plug the card in.

Similar Messages

I have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray. i have tried resetting it and its not workin. what should i do, please help. thanks

i have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray. i have tried resetting it and its not workin. what should i do, please help. thanks

If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

JCombox does not work under linux (fedora) could you help me???

Hi All,
I am implementing a GUI for a linux application. This GUI works fine under windows system. But the JCombobox does not work under Linux system. Would you help me to solve it? Thank you very much!..
The problem is that I cannot select any other item except the first item in the dropdown box of JCombobox. There is no event generated when I click the combobox, while events are generated for other Buttons.
This problem exists for the following code when I maximize the window. When the window is minimize to some extend in my problem, it is OK.
Here is the simplify code:
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.Serializable;
import java.util.Vector;
import javax.swing.ComboBoxModel;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.event.ListDataEvent;
import javax.swing.event.PopupMenuEvent;
import javax.swing.event.PopupMenuListener;
import java.awt.event.*;
import javax.swing.*;
//carmen
import javax.swing.filechooser.*;
import javax.swing.event.*;
import javax.swing.Box;
import javax.swing.BoxLayout;
import javax.swing.border.*;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
//import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
import java.io.*;
import java.util.*;
import java.lang.String.*;
public class Test extends JFrame
     private JComboBox jComboBox1;
     private JComboBox jComboBox2;
     private JPanel contentPane;
     private JTabbedPane jTabbedPane1;
     //Main Tab
     private JPanel Main;
     private JPanel OutputSimSet;
     private JPanel Test;
     private JPanel ScriptGenTab;
     private JPanel ResultTab;
//Result Tab
private JPanel SimResult;
     public Test()
          super();
          //initializeComponent();
          contentPane = (JPanel)this.getContentPane();
          jTabbedPane1 = new JTabbedPane();
          Main = new JPanel();
          OutputSimSet = new JPanel();
          Test = new JPanel();
          ScriptGenTab = new JPanel();
          ResultTab = new JPanel();
          SimResult = new JPanel();
     jComboBox1 = new JComboBox(
                    new String[]{"Item 1","Item 2", "Item 3"});
                    jComboBox1.addActionListener(new ActionListener() {
                    public void actionPerformed(ActionEvent ae) {
                    System.out.println("Yeah");
     jComboBox2 = new JComboBox(
                              new String[]{"Item 1","Item 2", "Item 3"});
                              jComboBox2.addActionListener(new ActionListener() {
                              public void actionPerformed(ActionEvent ae) {
                              System.out.println("Yeah");
          // jTabbedPane1
          jTabbedPane1.addTab("Main", Main);
          jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
          jTabbedPane1.addTab("Simulation Result", ResultTab);
          jTabbedPane1.addChangeListener(new ChangeListener() {
               public void stateChanged(ChangeEvent e)
                    jTabbedPane1_stateChanged(e);
          // contentPane
          contentPane.setLayout(new BorderLayout(0, 0));
          contentPane.add(jTabbedPane1, BorderLayout.CENTER);
          // Main
          //Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          Main.setLayout(new BorderLayout(0, 0));
          Main.add(OutputSimSet,BorderLayout.NORTH);
          OutputSimSet.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          OutputSimSet.add(Test, 0);
          Test.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          Test.add(jComboBox1,0);
          //ResultTab
          ResultTab.setLayout(new BorderLayout(0, 0));
          ResultTab.setBorder(new TitledBorder(""));
          ResultTab.add(SimResult, BorderLayout.NORTH);
          SimResult.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
          SimResult.add(jComboBox2,0);
          // Test
          this.setTitle("Test");
          this.setLocation(new Point(0, 0));
          this.setSize(new Dimension(600, 500));
          this.setVisible(true);
     public void initializeComponent()
     /** Add Component Without a Layout Manager (Absolute Positioning) */
     private void addComponent(Container container,Component c,int x,int y,int width,int height)
          c.setBounds(x,y,width,height);
          container.add(c);
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jTabbedPane1_stateChanged(ChangeEvent e)
          System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
          // TODO: Add any handling code here
     // TODO: Add any method code to meet your needs in the following area
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jComboBox1_actionPerformed(ActionEvent e)
          System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
          Object o = jComboBox1.getSelectedItem();
          System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
          // TODO: Add any handling code here for the particular object being selected
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Create and set up the window.
Test frame = new Test();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
}

package oct03_JCBox;
import java.awt.BorderLayout;
import java.awt.Component;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.FlowLayout;
import java.awt.Point;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JTabbedPane;
import javax.swing.event.ChangeEvent;
import javax.swing.event.ChangeListener;
public class Test extends JFrame
private JComboBox jComboBox1;
private JComboBox jComboBox2;
private JPanel contentPane;
private JTabbedPane jTabbedPane1;
//Main Tab
private JPanel Main;
//private JPanel OutputSimSet;
//private JPanel Test;
private JPanel ScriptGenTab;
private JPanel ResultTab;
//Result Tab
//private JPanel SimResult;
public Test()
     super();
     //initializeComponent();
     contentPane = (JPanel)this.getContentPane();
     jTabbedPane1 = new JTabbedPane();
     Main = new JPanel();
     ScriptGenTab = new JPanel();
     ResultTab = new JPanel();
//     OutputSimSet = new JPanel();
//     Test = new JPanel();
//     SimResult = new JPanel();
     jComboBox1 = new JComboBox(
     new String[]{"Item 1","Item 2", "Item 3"});
     jComboBox1.addActionListener(new ActionListener() {
     public void actionPerformed(ActionEvent ae) {
          System.out.println("Yeah");
     jComboBox2 = new JComboBox(
     new String[]{"Item 1","Item 2", "Item 3"});
     jComboBox2.addActionListener(new ActionListener() {
          public void actionPerformed(ActionEvent ae) {
               System.out.println("Yeah");
     // Main
     //Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     Main.add(jComboBox1);
     //ResultTab -----
     ResultTab.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
     ResultTab.add(jComboBox2);
    //      jTabbedPane1
     jTabbedPane1.addTab("Main", Main);
     jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
     jTabbedPane1.addTab("Simulation Result", ResultTab);
     jTabbedPane1.addChangeListener(new ChangeListener() {
          public void stateChanged(ChangeEvent e)
               jTabbedPane1_stateChanged(e);
     // contentPane
     contentPane.setLayout(new BorderLayout(0, 0));
     contentPane.add(jTabbedPane1, BorderLayout.CENTER);
     // Test
     this.setTitle("Test");
     this.setLocation(new Point(0, 0));
     this.setSize(new Dimension(600, 500));
     this.setVisible(true);
     public void initializeComponent()
//     /** Add Component Without a Layout Manager (Absolute Positioning) */
//     private void addComponent(Container container,Component c,int x,int y,int width,int height)
//     c.setBounds(x,y,width,height);
//     container.add(c);
     // TODO: Add any appropriate code in the following Event Handling Methods
     private void jTabbedPane1_stateChanged(ChangeEvent e)
     System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
     // TODO: Add any handling code here
     // TODO: Add any method code to meet your needs in the following area
     // TODO: Add any appropriate code in the following Event Handling Methods
//     private void jComboBox1_actionPerformed(ActionEvent e)
//     System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
//     Object o = jComboBox1.getSelectedItem();
//     System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
//     // TODO: Add any handling code here for the particular object being selected
     * Create the GUI and show it. For thread safety,
     * this method should be invoked from the
     * event-dispatching thread.
     private static void createAndShowGUI() {
     //Create and set up the window.
     Test frame = new Test();
     frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     frame.pack();
     frame.setVisible(true);
public static void main(String[] args) {
     //Schedule a job for the event-dispatching thread:
     //creating and showing this application's GUI.
     javax.swing.SwingUtilities.invokeLater(new Runnable() {
     public void run() {
     createAndShowGUI();
} Try this - you use too many unnecessary JPanels.
Which way you prefer with actionPerformed should work either way.
I think your problem was too many unnecessary Panels and set all attributes before it is added, perhaps,
not add the panel first and then try to set attributes like layout, color, etc...

Help viewer does not work after update to 10.4.4

Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Flash player does not work under one user account.

Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FS

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

The video out is NOT WORKING under 10.5.2

*APPLE please read this;*
The video out on the MacBook Pro is NOT WORKING under 10.5.2, or precisely is working with a possibility of 10%! Monitors doesn't find signal in, or when they find it, the image is unstable with green shadows.
_I tried 28 external monitor in a store and only ONE was working normally!_ I tried with all the cables combinations (DVI->DVI or DVI->ANALOG, with several different brand cables).
Before the 10.5 update, I didn't have any problem with external Monitor.
The point is that I have installed in the same computer (MAC BOOK PRO) also WINDOWS VISTA, and all the monitors that are not working with MAC OS are working perfectly under VISTA system.
I made a long research online and I found out that thousands of users have the same problem, but no one receive an answer from APPLE from several months!
This is not the only problem that I have under MAC OS 10.5, but them, are other topics.
_Please at least resolve this MAJOR problem that I and thousands of other users have with video out._
Thank you.
Leonardo Corbucci Zanobi
F I R S T A K E - STUDIOS
www.firstake.net

Video out under 10.5.2 works fine for me and for a colleague of mine with a more recent MacBook Pro. I'd wager it's a problem with your Leopard install, not a universal one.
Also, FYI, Apple doesn't read these forums; they're just for user-to-user help. If you want to leave MacBook Pro feedback for Apple, do so here:
http://www.apple.com/feedback/macbookpro.html
But again, I do not believe yours is a universal issue. We'll be happy to help troubleshoot though. What do you mean the image is "unstable"? Could you take a digital photograph of the external monitor's screen and upload it somewhere?

Swedish chars �� not working under Solaris

Hi All,
I created the following little code and it is not working under Solaris 7, JDK1.4.1_01. (also tested some other but does not work)
public class HelloSweden
public static void main(String [] args)
String newName="��";
String charsetName = "iso-8859-2";
byte [] s = {(byte)229, (byte)228, (byte)246};
try
newName = new String(s, 0, s.length, charsetName);
catch ( java.io.UnsupportedEncodingException e )
System.err.println(e.getMessage());
e.printStackTrace();
System.out.println("new name is: "+newName);
for(int i=0; i<newName.getBytes().length; i++)
System.out.println(i+"."+":"+newName.getBytes());
The problem is that on Solaris 7 the output is:
new name is: ???
0.:63
1.:63
2.:63
Whereas on Linux it works fine:
new name is: ��
0.:-27
1.:-28
2.:-10
I also tried the "javac -encoding iso8859-1" option but no use.
Could anybody help?
Thnx,
GF

I also tried the "javac -encoding iso8859-1" option
but no use.
Was the output exactly the same or were the numbers correct, at least?
You may need to compile with:
javac -encoding ISO-8859-1 ClassName.java
and then run with:
java -Dfile.encoding=ISO-8859-1 ClassName
You can set the character encoding explicitely like that. The character encoding depends on locale settings; if you set LC_ALL to a Swedish locale ("sv_SE"?) javac and java should start using the correct encodings automatically.

PLz help 7key is not working suddenli in my N-73

PLz help 7key is not working suddenli in my N-73 and the 7 is simply displaying on the screen help plz....
Birla

Ok.
It sounds as if something is keeping the key pressed, and that can be down to 2 reasons.
The phone has got wet and the internal key is corroded and fused, making a constant connection
or
Dust or dirt in under that key and are having the same affect
Either one of these reasons will need to be fixed at a Nokia Care Point as it will involve taking the phone apart.
You can find the nearest NCP to you at the Store Locator
Use the drop down list on the right to find your country.
If it is either of these faults, the NCP will probably charge you as it wont be a warranty fault, but a customer created fault.
Hope this helps.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Older ipod will not work under itunes11

My older ipods will not work under itunes 11, Who can help?

i think at this point we are unsure if the problem is that apple has once again decided to leave something older in the dust (as they've been doing a LOT lately) or that you've found a bug in itunes 11 that will be addressed at a later date. just how old are these ipods? if they were mine and i had to choose between itunes 11 and my ipods i would choose my ipods. right now i would look around the itunes forums and see if anyone else has this problem.

ISight not working under my account

Hi
Suddenly I've got iSight camera not working under my main Mac OS X account. PhotoBooth, Skype, iChat does not recognize it. They state that camera is not connected.
I've tried another account and it worked fine. But all the docs and setting are on my main account, so it's better not to delete it.
Since hardware works ok. I wonder how can I fix this issue under my account?

HARDWARRIOR wrote:
Hi
Suddenly I've got iSight camera not working under my main Mac OS X account. PhotoBooth, Skype, iChat does not recognize it. They state that camera is not connected.
I've tried another account and it worked fine. But all the docs and setting are on my main account, so it's better not to delete it.
Since hardware works ok. I wonder how can I fix this issue under my account?
See if anything from this recent topic helps you:
http://discussions.apple.com/message.jspa?messageID=12870386
EZ Jim
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Help button is not working in Infoview

Hi All ,
I am working on BO XI R2 environment and help button is not working properly in my infoview.
I can get help files from Admin console but the same is not true with infoview.I got two different server installations, one of them its working fine but not for the other.
I checked for help files in IIS and they are there , even I verified web.config file as well for infoview and it also seems to be correct.
Please advice what could be the reason.
Thanks,
Vivek.

CLOSED

F4 help key does not work in ESS on ITS in Portal

Hello All,
F4 help key is not working in all iviews in ESS in Portal.When i try to press it nothing happens and no pop up appears,kindly please suggest wt might be the cause of this error? Iam tired struggling with this issue and not able to trace out reason for the same.My Email Id is [email protected] .Plz revert at earliest.
regards,
Saumya

Hi,
This kind of problem is known when webgui is being started from an IAC, e.g. HRWPC_FC_EXEC
You have to set parameter ~webgui_popups 1 in the service file of this IAC.
BR,
Disha.
Pls reward points for helpful answers.

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit
Anyone had successs in this or another Bluetooth Keyboard after a bit of a struggle? What did you do to get it working? When I Add Device in Bluetooth it sees the keyboard but enlessly scans for it when I try to select and connect. The Rocketfish Bluetooth mouse worked just fine.

My friend, i have both, the bluetooth mouse and keyboard here that your talking about. and the keyboard was a struggle to pair with the windows 7 64 bit.... i think i spent 2 days working with it. and i didnt try anything special, i just kept trying to pair
it, and unplugging the dongle and working with it... and after a while. it worked... Lately though, i have been looking into getting a wired mouse and keyboard becuase of the delays and sleep time i have with my current keyboard(rocketfish). supposidly there
is a way around the delays but it disables all the options on your keyboard. IE the media buttons, and web browsing features. and my mouse keeps dieing off too....
Also, after researching these products more, i found that alot of people experienced similar problems with them, Being delays and mouse failure. Even with fresh batteries and all. The products werent meant to be used long term(2-3 years) for extensive use...
I dont know about you but i thinki paid 100 bucks for the pair so thats only 25 bucks a year... Which is kinda silly considering i coulda got a better one that wont cough up on me.
If anyone reading this finds a good wireless keyboard that doesnt delay, and a mouth that doesnt delay...(my biggest concern). Please mention it. i am very interested in.

Tomcat 4.1.x not working under JDK 1.2.2

We are trying to test our web application on all versions of JDK starting from 1.2.2. We use Tomcat as the servlet engine and after upgrading from Tomcat 3.2.x to 4.1.24 (we've tried 4.1.18 as well) we have noticed that the new Tomcat does not start under JDK 1.2.2, see command line output below. We've tried on several machines and it fails with the same Exception. Has anyone tried running Tomcat 4.x on JDK 1.2.x? We find it hard to believe that a product like Tomcat would fail to support JDK 1.2, so any information would be appreciated.
C:\Java\jakarta-tomcat-4.1.24\bin>catalina.bat run
Using CATALINA_BASE: ..
Using CATALINA_HOME: ..
Using CATALINA_TMPDIR: ..\temp
Using JAVA_HOME: c:\java\jdk1.2
Bootstrap: Class loader creation threw exception
java.lang.IllegalMonitorStateException: current thread not owner
at org.apache.catalina.loader.StandardClassLoader.addRepositoryInternal(StandardClassLoader.java, Compiled Code)
at org.apache.catalina.loader.StandardClassLoader.<init>(StandardClassLoader.java, Compiled Code)
at org.apache.catalina.startup.ClassLoaderFactory.createClassLoader(ClassLoaderFactory.java, Compiled Code)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java, Compiled Code)

I had the same problem.
No Tomcat 4.1.x is not working under JDK1.2.2.
It has something to do with a difference in byte code of the classes between jdk1.2.2 and jdk 1.4.
I am running now on J2SDK1.4.1_03 and have no problems any more

Dreamweaver CS4 not working under MacOS 10.9

on starting DW CS4 it asks for Java Runtime engine 6, but Mavericks has Java v.7 installed. Since Java 6 was part of the OS of previous systems, I cannot install it seperately, besides it would probably cause conflicts with OS 10.9. Do I have to trash my DW, or is there a workaround.
Thanx

If I follow click the instal button on
I get the progress bar for about 1 sec and then the message about a supposed
network problem
which is unreal, since my network works perfectly for any other task and I
had even tried disabling the firewall and little snitch. Things are still
not working
Von: Jon Fritz II <[email protected]>
Antworten an: <[email protected]>
Datum: Montag, 25. November 2013 18:34
An: RoWo <[email protected]>
Betreff: Dreamweaver CS4 not working under
MacOS 10.9
Re: Dreamweaver CS4 not working under MacOS 10.9
created by Jon Fritz II <http://forums.adobe.com/people/JonFritzII> in
Dreamweaver support forum - View the full discussion
<http://forums.adobe.com/message/5872889#5872889>
This has been discussed a lot here, you need to install Java 6.
http://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.ht ml
<http://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html>
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in the
forum to embed the image at http://forums.adobe.com/message/5872889#5872889
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/5872889#5872889 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/5872889#5872889. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Dreamweaver support forum at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=2240> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/thread/416458?tstart=0.

Help!!!! motu 828 not working under 10.4.3

Similar Messages

Maybe you are looking for