Help -- MP3 conversion problems
Currently converting wave files from SoundTrack Pro into mp3 by using the Automator for encoding and import into i-tunes. Although the wave file sound is clear and clean, the mp3 files have a slight echo/reverb to them and I have not been able to overcome this.
1. Does anybody have a solution to the echo?
2. Is there a better program available for conversion to mp3?
Any help will be appreciated, as clients are not ecstatic about this "new" sound.
Thanks,
Jack Burke
1-800-451-8273
The other tip is very helpful, but you can also use iTunes.
Drag your file (AIFF or WAV) into your Library and convert it by rightclicking on it and choosing "Convert selection to ...". Before you do this, set the proper mp3 format in your iTunes preferences (Preferences - Advanced - Importing). I think the default is AAC import, so you have to change that when you need an mp3. Import using mp3 encoder, custom... Then choose something like 192 or better kbps bitrate, [x] Use Variable Bit Rate Encoding and Joint Stereo. This will render a pretty decent mp3 file.
Good luck!
Hens Zimmerman
Podcast: http://soundsgood.37hz.net
Similar Messages
-
Music will not play after AAC to MP3 conversion
Hi, Please help! Over the past couple of days I have converted ALL my music (46GB) from the mix of MP3 and AAC to all being MP3 at 160bit rate. I removed all the music from iTunes and then just re-added the new MP3 conversions. Now when I open iTunes I get the following error box "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly". The tracks will simply not play. The MP3 files work fine when burnt onto a CD via my burning software. I have re-installed Quicktime as advised, but don't want to re-do iTunes as I have loads of playlists created. Anyone any ideas on how I can fix it? My XP machine is fully up to date, iTunes is latest version, all drivers are up to date and valid. Many thanks in advance, Ewan
Vaio Windows XP ProI fixed it by deleting the MP3 and re-loaded / re-sync it back.
It took over 2 hrs as I had over 1000 Mp3. -
How to debug file content conversion problems?
Hi,
I'm trying to debug a file content conversion problem. I'm mapping a few nodes in an IDOC to a file of fixed length fields. I'm using the "<Node A>.fieldFixedLengths", "<Node B>.fieldFixedLengths", "<Node C>.fieldFixedLengths", etc. parameters to specify the fixed length records.
However, a certain node (for e.g. Node B) is causing a problem and if it is present in the IDOC, the output file does not get created. Upon checking the XI monitor, I notice that the file gets mapped correctly and thus the problem lies when the file adapter does the file content conversion. How do I debug this because there is no descriptive error in the XI log? If this node is not present, the file gets generated fine.
Thanks,
Basant GuptaHi,
If your SXMB_MONI shows, success status, then go to RWB->Message Monitoring->Message display tool and then check Audit log for the analysis,
So it wil help you debug the situation.
If there is no error, then check RWB->Component Monitoring->Adapter Monitoring for you file communciation channel..
/people/michal.krawczyk2/blog/2005/01/02/simple-adapter-and-message-monitoring
Regards,
Moorthy -
Help with systemd problems/reply to closed thread
@Everyone; as the previopus topic was closed, I am opening a new one here, partly to reply to some things that was said to me in the previous thread/topic (and I do not like to leave people hanging), but mainly to try and get some help with my systemd config (that I was not able to find help with in the wiki or manpages).
@czubek; eww, that sounds rather similiar to some other operating systems I've heard of (not just, but obviously including, windows)... For me, subjectively, that is not very attractive, as being able to have a single application do a single thing, and then mixing and matching as I personally see fit is a great thing.
@tomegun: I can indeed see your point, but if I made direct quotes on all the things I reply too, my posts would reach biblical proportions.
Mmm-hmm, I do indeed know of "the Arch Way"; however, the system that you expose can be of varying complexity as well, and I found that the system that was presented to me by way of Sysvinit/initscripts was a way simpler system than that presented to me by systemd.
Indeed, and I do like that; I enjoy knowing how my system works and learning more about it; however, the truth is that reading manpages and the wiki isn't always enough. And I use the numbers instead of letters in certain places as a jest, please, do not get offended by that; if you have to, get offended by my opinions.
Ah, I have now scanned the wiki, the manpages, and have already faced problems. While part of me is saddened by this fact (as I was hoping for a smooth transition to systemd), part of me is glad that I can at least prove that everything isn't quite as simple as some people would make it out to be. More on this later in this post, as I do need help with the problems I have faced.
And I wouldn't say that the new and old way are equally trivial, as I immediatley faced problems with "the new way". More on this later.
Ok, I find that if the debate is polarized, then there is nothing wrong with describing it as such. I spell what I see.
Oh my... Ignored as a matter of principle? I would say that that is an excellent way to stagnate; by that logic, moviemakers, gamemakers etcetera should ignore any and all criticism they recieve, as the critics are not contributing.... Wouldn't that lead to a complete halt in development? Isn't criticism (so long as it is constructive, obviously) a key component of (media/software) evolution?
Ah, I see, then I misunderstood the current state of the install media
"Some adjustements"... Well, I guess we'll have to see how that goes, then. Hopefully it'll be smooth.
@Everyone; Awebb possesses stunning accuracy as far as his observations go.
@zb3; My point exactly.
@tomegun; I believe you to be wrong; complaining (but not whining) is the first step towards improvement, as I think that I and zb3 has shown.
Further, your last point (where you talk about "deep understanding of Y" and whatnot) is basically saying that only devs and programmers can contribute, so zb3's observation would be correct.
Also, making suggestions is part of constructive criticism; you can do that even if you can't code, e.g. by saying "X works badly because it makes Y crash; couldn't we replace X with something akin to Z?". This is a valid point even if you have no intricate understanding of X, Y or Z, and if it is impossible to replace X for one reason or the other, it's not hard to reply with "Replacing X is impossible because of reason Q", and then see if someone can solve reason Q etcetera.
zb3's example is obviously helping; for one, it would allow people to know taht they can't boot with systemd in certain cases, or that installing/runing systemd can break their system. I would consider that rather important information.
@Everyone; Now then, to see if I can (or rather, if I can get help to) shed some light on some problems I've been having.
My transition to systemd went pretty smooth (besides the fact that I couldn't use 'systemctl' to set anything, and neither duckduckgo nor any posts in the forums could help me (the error I continously got was "Failed to issue method call: Launch helper exited with unknown return code 1") and that there are no manpages/tips on how to configure the files for "localtime" and "adjtime", which would've been good considering some syntax have changed) to about halfway through, to the point where I was supposed to start using systemd for my daemons.
Now then, to the main problem; first, I tried running
"systemctl enable syslog-ng.service"
and got the following message;
"ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'"
Since it doesn't exclusively say that something went wrong (at least as far as I can understand), I pondered the message a bit, but moved on to try and start dbus by issuing
"systemctl enable dbus.service",
to which I got the reply
"The unit files have no [Install] section. They are not meant to be enabled using systemctl."
This I can only assume is an error message of some sort, especially seeing as it says "not meant to be enabled using systemctl", but the wiki rather explicitly states that that is what I am supposed to do.
I dare not move on (or attempt to start other daemons) without further advice, as I fear I might break my system. Any ideas as to how to solve this would be greatly appreciated.tcmdvm wrote:
The message;
"ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'"
indicates that running "systemctl enable syslog.service" is now enabled.
If you try running sytemtctl enable <whatever>.service and get
"The unit files have no [Install] section. They are not meant to be enabled using systemctl." means there is no <whatever>.service file available to enable.
The dbus.service as far as I know is already enabled when installing systemd and doesn't require any action.
Ah, right, systemd is chatty (I'm of the old skool; if nothing is/goes wrong, a program should keep quiet).
Oh ok, then I should dare more on.
ZekeSulastin wrote:To be a bit more precise, it means the service is there but it's only used as a dependency for something else; the [Install] section of the file is what tells systemctl where to link it and such. Also, where exactly in the wiki were you told explicitly to 'systemctl enable dbus.service'? I can easily point you to the sections in both installation guides that tell you how to set things like /etc/localtime et. al (also `man 7 archlinux`), but not the one that said to manually enable dbus.
Ah, I see; and well, I was told right here, going from the top, to "Enable Daemons formerly listed in rc.conf [...] For a translation of the daemons from /etc/rc.conf to systemd services, see: List of Daemons and Services.", and, using the list, dbus is mentioned there, as you can see. Since I started from the top, I did not know that you didn't need to enable that service. Perhaps it could be added to the descriptions of the relevant services in the Wiki which ones are autostarted?
ZekeSulastin wrote:Lastly, I don't think trying to continue conversations from a closed thread is a very good idea, let alone doing it in a giant undivided wall of text that makes it quite difficult to pick out much any single topic.
Meh, I directly refer to the relevant people, they can easily see their own old posts in the previous thread, etcetera... I think te ones who have something to say will be able to find my replies to their previous statements (or so I hope). For now, as everyone can see, I quote stuff (but man might I make some huge posts if I ever post again in the future, if I quote what I reply to).
fsckd wrote:This is not really a technical support subforum. Moving from Arch Discussion to Newbie Corner.
Ah ok, thanks (or perhaps a cautious thanks? Moving it to "newbie corner" might, after all, be a subtle insult...).
tomegun wrote:It is not really possible to follow your message as you don't quote what you are replying to. Moreover, as the thread was closed I think that means we should stop the discussion ;-)
Hmm, I think it means cop-out for lack or proper arguments/responses... But ok, I'll let it slide, for now (mainly as I can't do much else).
tomegun wrote:You are not meant to enable dbus.service as it is enabled unconditionally. To check the enabled/disabled state of your services try "systemctl list-unit-files". "static" means that you are not supposed to enabled/disable it.
Ah ok, thank you. Now, having abandoned all hope, I'll start configuring again and see how it goes... May the void protect me. If I die, grieve not for me, but remember me in the fight against hard-to-configure applications.
(edit/addon)
Actually, what am I supposed to do with "hwclock"? the List of Daemons only says that I shouldn't run that in tandem with ntpd, but I'm not running ntpd, so... How do I get hwclock with systemd?
Edited for additional question.
Last edited by incassum (2012-11-07 08:44:42) -
Hello,
I need some help about MIDI to MP3 Conversion, because I want to programme a MIDI to MP3 Conversion.
Is it possible to realize?
Could anybody give me some links for Information about this Conversion or some Code-Examples for this Conversion or any other help?
Thank you.or any other help?Linux, using timidity and lame:
timidity -Or -o - <input.mid> | lame - <output.mp3> -
Oracle to Mysql character set conversion problem!!! PLZ IGNORE
Hi Experts,
I have created a database link from Oracle 10g to Mysql 5.
I have installed Oracle Gateway 11g for this purpose.
When i retreive the data from sql plus the text is displayed as question marks.
Oracle 10g Database character set is WE8MSWIN1252
Mysql character set --->latin1
Character set of ODBC connector for mysql is latin7
Character set in the parameter file of HS folder is WE8MSWIN1252When i retrieve data from sql developer the text is fine(as i think it directly takes the character set of target) but
when i login from sqlplus i get question marks!
I have another post in Heterogeneous Connectivity forum
Re: Oracle to Mysql character set conversion problem!!! PLZ HELP
Kindly update your comments there,
@@@@@@@@@@@@@@2
Appreciate your help,
regards
Edited by: user10243788 on Apr 21, 2010 3:25 AMIt is OK to post a globalization-related question in this forum in addition to the forum pertaining to the main technology. Not all experts follow all possible forums on OTN. Of course, you should cross-link the posts to let people merge the answers.
Regarding the problem itself, make sure that SQL*Plus has the right NLS_LANG setting in the environment. On Windows, in the Command Prompt:
C:\> set NLS_LANG=.WE8PC850
C:\> sqlplus ...On Unix:
$ setenv NLS_LANG .WE8ISO8859P1 (or NLS_LANG=.WE8ISO8859P1; export NLS_LANG)
$ sqlplus ...-- Sergiusz -
For some reason my .mp3 files show up twice and in some cases three times in the media player. The strange thing is that I've tried to delete all music files and they still show up. I also tried doing a complete erase of all data using the Pre erase function and the mp3's all show up again when installed apps sync up again. It's like all mp3's have been merged with application data and sync'd to my profile.
Has anyone else run into this?
Post relates to: Pre p100eww (Sprint)'Duplicate Files Deleter' helps to find out mp3 duplication problem & it has the complete solution regarding removal of duplicate files too.
Thanks. -
Hello,
We have a currency conversion problem with the journals table.
Steps:
1.- We insert a journal in Local Currency (LC) with the journals functionality. Both convert at average rate (for example), so when we run currency conversion rules the value is converted in Legalapp application, but not in Journal Table. So if the users or auditors need to see all the journals in EUR is not possible to extract with the journals reports.
2.- Also we have the problem when we apply the carry forward rules for the next year, and the RE-Open functionality. Example, the flow of the year N applies at average rate, when we make the carry forward rule it goes to Opening Balance flow, and this opening balance doesn´t have currency conversion rule (AS-IS)(we cannot use an OPEAVG rule because we need the historical value in the opening balance flow). So we lose the EUR position value because we don´t have a journal to apply the RE-OPEN functionality.
3.- We have the possibility of inserting the Journal in LC and EUR (Group Currency) also, but here you are obligating to the users to manually convert the values of each account of each journal, and can be mistakes of the value that the user insert in the Journal Entry, with the values of the application (converted with the currency conversion functionality).
Do you know how can we solve this error?
Regards,Hi,
1. Journal tables contains just values for LC and only the posted journals are converted.
The Corrency conversion will be applied just for journal posted not for all journals.
You can see the value reflected into application just checking the the reports for special Data Source used by journal.
Journal module is used for adjustment which means the auditors can see the adjustment into local cuurency and just the final value posted. The rest of journal not posted has no importance because they don't have any impact for database values.
2. I don't think I understand the point which means I will leave other people to help ou with this poin
3. I don't understand why you have to run Currency Conversion manually.
When you input the journal you will execute default logic or you can execute journal.lgx logic.
In any of these module if you place currency translation you will have your figures automat converted.
Regards
Sorin Radulescu
Edited by: Sorin Radulescu on Dec 2, 2009 3:35 PM -
Dreamweaver cc html entity conversion problem in mac -NO utf-8 related answer please
I probably am fighting against a bug existing in DW for a while, and i'm really on the edge of bursting out!
Here are the specifications:
Dreamweaver CC from creative cloud (also tested w/ CS5.5 too) installed on mac, OS and DW user interfaces are english, and on mac turkish keyboard layout is also installed.
I have been using DW for maybe 15 years, since it was macromedia.. But was always on windows. This is the first time I use it on mac. Here is my problem step by step:
1- Dreamweaver > Pereferences > New Document > Default Encoding: Western (ISO Latin 1) (NOT UTF-8 PLEASE, IT KEEPS THE CHARS UNCHANGED, ISO LATIN1 IS IMPORTANT)
2- Go to Design View,
3- There are 6 special characters in Turkish (times 2 for the caps versions of course), type:
ĞÜŞİÖÇğüşıöç
4- Go back to code view, what i should have seen was:
ĞÜŞİÖÇğüşıöç
But I see:
ĞÜŞİÖÇğüşıöç
There are 3 chars (and capital versions) NOT converted to html entity at all. Which were: ĞŞİğşı
But I should have seen them as: ĞŞİğşı
Any help would be appreciated, I do not want to leave my old friend DW just because of a weird conversion problem...Ok, when you look at the code view, what do you see exactly?
do you see unconverted
ĞÜŞİÖÇğüşıöç
or converted
ĞÜŞİÖÇğüşıöç
Here is one of my reasons:
I sometimes create newsletters in turkish for my customers, and the html files i prepare are sent to customers attached as inline through various versions of outlook or thunderbird, or through i completely different email sender company (none is sent by me, i only create the html file). And most of the time the headers and some coding are cut off from the code when used to send as newsletter, and i have no control at all on it. so i have to create absolute correct viewed/rendered html files since i have no control at all on which sending method will be used or which os or browser or mail system will be used to open it... -
Hi ABAPers
While sending smartform as a mail attachment(PDF Format) i am facing problem.
While opening the PDF attachment in SOST (T-code), It shows a error pop up.(I.e., Conversion Problem in PDF). Some pages are getting opened as a blank page and some are not getting opened.
What may be the prolem.
Please help Me out ............
But it works properly in IDES version.
In IDES i have ADOBE 5.0 Version, In Live server it is ADOBE 6.0 ,7.0.Hi,
Thanks for your feedback
There is no problem in the coding , is there any thing we have to do in configuration level regarding PDF ?????
*& Report ZVNPAML
REPORT zvnpaml.
TABLES: somlrec90.
DATA: it_zvnpa TYPE TABLE OF zvnpa,
it_zvnpa1 TYPE TABLE OF zvnpa,
wa_zvnpa TYPE zvnpa,
it_head TYPE TABLE OF zvnpa,
it_head1 TYPE TABLE OF zvnpa,
wa_head TYPE zvnpa,
wa_head1 TYPE zvnpa,
fmname TYPE rs38l_fnam,
tot TYPE zvnpa-wrshb,
otfout TYPE ssfcrescl,
outopt type SSFCRESOP,
pdftab TYPE TABLE OF tline WITH HEADER LINE,
datab TYPE TABLE OF itcoo WITH HEADER LINE,
conpar TYPE ssfctrlop,
mailrec TYPE swotobjid,
outopt TYPE ssfcompop,
jobopt TYPE ssfcresop,
jobout TYPE ssfcrescl,
w_return TYPE ssfcrescl,
it_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
binsz LIKE sood-objlen,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
wa_buffer TYPE string,"To convert from 132 to 255
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: wa_doc_data TYPE sodocchgi1,
it_pack TYPE TABLE OF sopcklsti1,
wa_pack TYPE sopcklsti1,
it_mailhead TYPE TABLE OF solisti1, " OCCURS 1 WITH HEADER LINE,
wa_mailhead TYPE solisti1,
it_mailbody TYPE TABLE OF solisti1, " OCCURS 0 WITH HEADER LINE,
wa_mailbody TYPE solisti1,
it_receiverid TYPE TABLE OF somlrec90, " OCCURS 10 WITH HEADER LINE.
wa_receiverid TYPE somlrec90,
it_attach LIKE solisti1 OCCURS 0 WITH HEADER LINE,
wa_attach TYPE solisti1,
lncnt TYPE i.
DATA: lv_spool TYPE tsp01-rqident,
wa_line TYPE tsp01-rqident,
it_pdf_output TYPE TABLE OF tline.
SELECTION-SCREEN BEGIN OF BLOCK vendor WITH FRAME TITLE text-w03.
*PARAMETERS: pa_lifnr TYPE lfa1-lifnr,
pa_bukrs TYPE zvnpa-bukrs,
PARAMETERS: pa_augdt TYPE zvnpa-augdt.
SELECT-OPTIONS: pa_mail FOR somlrec90-receiver NO INTERVALS.
SELECTION-SCREEN END OF BLOCK vendor.
SELECT * FROM zvnpa INTO CORRESPONDING FIELDS OF TABLE it_zvnpa1
WHERE augdt = pa_augdt
AND bukrs = '2000'
AND flag <> 'X'.
konto = pa_lifnr AND
bukrs = pa_bukrs AND
IF it_zvnpa1 IS NOT INITIAL.
SORT it_zvnpa1 BY konto.
LOOP AT it_zvnpa1 INTO wa_zvnpa.
APPEND wa_zvnpa TO it_zvnpa.
CLEAR: wa_zvnpa.
AT END OF konto.
SORT it_zvnpa BY ttref augbl wrshb shkzg.
*it_head[] = it_zvnpa[].
LOOP AT it_zvnpa INTO wa_zvnpa WHERE shkzg = 'S'.
APPEND wa_zvnpa TO it_head1.
CLEAR: wa_zvnpa.
ENDLOOP.
*delete adjacent duplicates from it_head comparing ttref.
SORT it_head1 BY ttref augbl wrshb shkzg.
LOOP AT it_head1 INTO wa_head1.
tot = tot + wa_head1-wrshb.
wa_head = wa_head1.
AT END OF ttref.
wa_head-wrshb = tot.
APPEND wa_head TO it_head.
CLEAR: wa_head,tot.
ENDAT.
CLEAR: wa_head1.
ENDLOOP.
SORT it_head BY ttref augbl wrshb shkzg.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZVNPASF'
IMPORTING
fm_name = fmname.
conpar-no_dialog = 'X'.
conpar-getotf = 'X'.
outopt-tddest = 'LOCL'.
outopt-urlcall = fmname.
outopt-tdnoprev = 'X'.
outopt-tdnewid = 'X'.
CALL FUNCTION fmname
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = conpar
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = outopt
user_settings = ' '
IMPORTING
DOCUMENT_OUTPUT_INFO =
job_output_info = w_return
JOB_OUTPUT_OPTIONS =
TABLES
it_zvnpa = it_zvnpa
it_head = it_head.
READ TABLE w_return-spoolids INTO wa_line INDEX 1.
IF sy-subrc = 0.
lv_spool = wa_line.
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = lv_spool
no_dialog = ' '
dst_device = 'LOCL'
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_otf_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_dstdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11.
it_otf[] = w_return-otfdata[].
IF it_otf[] IS NOT INITIAL.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = binsz
TABLES
otf = it_otf
lines = i_tline.
LOOP AT i_tline.
TRANSLATE i_tline USING ' ~'.
CONCATENATE wa_buffer i_tline INTO wa_buffer.
ENDLOOP.
TRANSLATE wa_buffer USING '~ '.
DO.
i_record = wa_buffer.
APPEND i_record.
SHIFT wa_buffer LEFT BY 255 PLACES.
IF wa_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDIF.
IF i_record[] IS NOT INITIAL.
it_attach[] = i_record[].
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
EXPORTING
LINE_WIDTH_SRC = '132'
LINE_WIDTH_DST = '255'
TRANSFER_BIN = ' '
TABLES
content_in = i_tline[]
content_out = IT_ATTACH[]
EXCEPTIONS
ERR_LINE_WIDTH_SRC_TOO_LONG = 1
ERR_LINE_WIDTH_DST_TOO_LONG = 2
ERR_CONV_FAILED = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
it_attach[] = w_return-otfdata[].
IF it_pdf_output[] IS NOT INITIAL.
it_attach[] = it_pdf_output[].
wa_mailbody-line = 'Dear Sir / Madam,'.
APPEND wa_mailbody TO it_mailbody.
wa_mailbody-line = 'Please be informed that we have remitted the payment towards your outstanding bills as per the attachment:'.
APPEND wa_mailbody TO it_mailbody.
wa_mailbody-line = ' '.
APPEND wa_mailbody TO it_mailbody.
wa_mailbody-line = ' '.
APPEND wa_mailbody TO it_mailbody.
wa_mailbody-line = 'Best Regards,'.
APPEND wa_mailbody TO it_mailbody.
wa_mailbody-line = 'Mary. G '.
APPEND wa_mailbody TO it_mailbody.
wa_mailbody-line = 'Finance department'.
APPEND wa_mailbody TO it_mailbody.
wa_mailbody-line = 'Intimate Fashions (I) Pvt Ltd'.
APPEND wa_mailbody TO it_mailbody.
wa_mailbody-line = ' '.
APPEND wa_mailbody TO it_mailbody.
wa_mailbody-line = 'Please do not print this email unless it is absolutely necessary. Become environment friendly.'.
APPEND wa_mailbody TO it_mailbody.
wa_mailbody-line = 'E-MAIL DISCLAIMER.'.
APPEND wa_mailbody TO it_mailbody.
wa_mailbody-line = 'If you are not the addressee of this mail, please delete this. Intimate Fashions does not accept any liability on the improper usage of this mail. It may also be legally '.
APPEND wa_mailbody TO it_mailbody.
wa_mailbody-line = 'privileged. Internet communications cannot be guaranteed to be timely, secure or virus free'.
APPEND wa_mailbody TO it_mailbody.
DESCRIBE TABLE it_mailbody LINES lncnt.
wa_doc_data-obj_descr = 'Remittance details - Brunet'.
wa_doc_data-expiry_dat = sy-datum + 10.
wa_doc_data-obj_name = 'TRIAL'.
wa_doc_data-sensitivty = 'F'.
wa_doc_data-doc_size = lncnt * 255.
CLEAR wa_pack.
CLEAR wa_pack-transf_bin.
wa_pack-doc_type = 'RAW'.
wa_pack-transf_bin = ' '.
wa_pack-head_start = 1.
wa_pack-head_num = 0.
wa_pack-body_start = 1.
wa_pack-body_num = lncnt.
wa_pack-doc_size = lncnt * 255.
APPEND wa_pack TO it_pack.
CLEAR: lncnt,wa_pack.
DESCRIBE TABLE it_attach LINES lncnt.
wa_pack-transf_bin = 'X'.
wa_pack-head_start = 1.
wa_pack-head_num = 1.
wa_pack-body_start = 1.
wa_pack-body_num = lncnt.
wa_pack-doc_type = 'PDF'.
wa_pack-obj_name = 'VNPA'.
CONCATENATE 'Vendor Payment Advice' '.PDF' INTO wa_pack-obj_descr.
wa_pack-obj_descr = 'Vendor Payment Advice'.
READ TABLE it_attach INDEX lncnt. "INTO WA_ATTACH
wa_pack-doc_size = ( lncnt - 1 ) * 255 + STRLEN( it_attach ).
wa_pack-doc_size = lncnt * 255.
APPEND wa_pack TO it_pack.
CLEAR: lncnt,wa_pack.
wa_mailhead = 'Vendor Payment Advice'.
APPEND wa_mailhead TO it_mailhead.
CLEAR: wa_mailhead.
LOOP AT pa_mail.
wa_receiverid-receiver = pa_mail-low.
wa_receiverid-rec_type = 'U'.
APPEND wa_receiverid TO it_receiverid.
CLEAR:wa_receiverid.
ENDLOOP.
wa_receiverid-receiver = 'xxxxx'. "(I have given mail id here )
wa_receiverid-rec_type = 'U'.
APPEND wa_receiverid TO it_receiverid.
wa_receiverid-receiver = 'xxxxx'. "(I have given mail id here )
wa_receiverid-rec_type = 'U'.
APPEND wa_receiverid TO it_receiverid.
wa_receiverid-receiver = 'xxxxx'. "(I have given mail id here )
wa_receiverid-rec_type = 'U'.
APPEND wa_receiverid TO it_receiverid.
CLEAR:wa_receiverid,lncnt.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_data
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = it_pack
object_header = it_mailhead
contents_bin = it_attach[]
contents_txt = it_mailbody
CONTENTS_HEX = it_attach
OBJECT_PARA =
OBJECT_PARB =
receivers = it_receiverid
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
LOOP AT it_zvnpa INTO wa_zvnpa.
wa_zvnpa-flag = 'X'.
MODIFY it_zvnpa FROM wa_zvnpa TRANSPORTING flag.
ENDLOOP.
MODIFY zvnpa FROM TABLE it_zvnpa.
ENDIF.
ENDIF.
CLEAR: wa_zvnpa,it_zvnpa,it_otf,it_otf[],w_return,lncnt,
wa_doc_data,
wa_head,it_head,it_head1,
i_record,i_record[],
i_tline,i_tline[],
it_pack,
wa_pack,
it_mailhead,
wa_mailhead,
it_mailbody,
wa_mailbody,
it_receiverid,
wa_receiverid,
it_attach.
ENDAT.
ENDLOOP.
ENDIF. -
Please help with slideshow problems!
Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
ThanksThanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
> -
My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respondGenieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller! -
how do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls
Welcome to Apple Support Communities
When you try to copy data to the external drive, what happens? If you don't see any error, the external drive is formatted in NTFS, and OS X can't write in it.
To be able to write on this external drive, you have to use an app like Paragon NTFS. Another solution would be to format the external drive in FAT32 or exFAT with Disk Utility > http://pondini.org/OSX/DU1.html Make sure you copied all the files of the external disk to the internal disk before doing it -
Conversion problem in PURCHASE ORDER
Hi all,
wrong conversion was done in Quantities/Weights tab of item overview during creation of Purchase Order,instead of putting order unit " 1 tonne = 1000kg" it was wrongly fix as "5 tonne = 4536kg", the order has been receive and issue , but during stock taking this conversion problem is giving wrong Quantity for the material in MB5B . Pls what can i do to resolve this.Hi
If stock exists then kindly do the reverse process as below
1.Cancel material docuemt---MBST (Material document no and fiscial year)
2.Delete the P.O line items --Me22n
3.Enter the fresh line items in the same P.O
If partial stock Exists then do the Physical inventory process to adjust the Stock
Regards
Damu
Maybe you are looking for
-
ICloud & back to my mac - is this a screen share issue?
Since installing Lion a few weeks ago on my Macmini (to help me fully upgrade / migrate from MobileMe to iCloud) I've have a couple of issues which are bugging (no pun intended) the life out of me. I'm almost at the point of doing a complete erase a
-
SG-300 port lock by bpduguard not visible in webGUI ?
Hi, we are starting to replace low budget hubs by the SG-300's. On the accessports we use BPDUguard and mac security (max 1 user per port). The newest firmware is used (1.1.2.0). When i lock a port intentionally by connecting e.g. ports 4 and 5 toget
-
The office building I work in is too close to my favorite Starbucks and Passbook is constantly offering to load the Starbucks card every time I turn on my iPhone. What can I do? I'm sure the phone is using Location Services way more than I want it
-
My macbook pro has lost ilife 11!
I jus twent to apple store to get my mac repaired from a update melt down so the yrebooted it and the ilife has gone that came free with it how do i get it back?
-
Hi, I need to add few zfields to the Sales Quotation, Service Quotation, Service Order in SAP CRM , I am new to CRM and i found that AET tool in CRM can be used to enhance these tcodes. I need the below information , can some one help me with this 1