HELP MSI GX60 webcam error

I just bought this new MSI GX60 AMD and to my dismay I cannot turn on the webcam, it reads "Connect the camera"
Please help. Thank you

OH! I was able to turn on the camera but all I got is pure silhouette,

Similar Messages

MSI GX60 Webcam not there? No drivers available...help!

Maybe I'm missing something, but my fresh out of the box MSI GX60 is supposed to have a 720p webcam built in, but Skype, Windows Movie Maker and Cyberlink Youcam 5 all say there is no webcam. I am really bummed out that the webcam isn't detected, I tried installing windows 7 too and seeing if it would work there, but no luck. Please help!

Quote from: gateway4shadow on 18-May-13, 14:13:40
so i tried turning it on with the keyboard shortcut, nothing installed skype still cant see it? am i missing something?
>>Please read and comply with the Forum Rules.<<
Please follow the forum rules. Create your own thread so that we can deal with each users problems on a separate basis.

Help - MSi 890GXM-G65 error

Hello
New build with MSi 890GXM-G65 and AMD Phenom II X4 965 Black Edition was working perfectly for a few hours.
I added some legacy sata drives and for some reason I can't get to the BIOS menu, I just get 1 beep and a screen of red letters.
screen shot here - if you open that pic icon in a new tab
I'm not sure how to even start in terms of trouble shooting.
any guidance would be so appreciated,.
Mitchman
Board: MSI 890GXM-G65 (Model No. MS-7642)
Bios: Version 1.x
VGA: Integrated ATI Radeon HD4290 GPU
PSU: 500w ATX 2.03 ver (ATX-CW500WP4)
AMD Phenom II X4 965 Black Edition (Quad Core)
MEM: Corsair Vengeance 4x4gb CML16GX3M4A1600C9B
HDD: Seagate 1tb sata
OS: Windows 7 64bit Ultra

Quote from: xmad on 06-September-12, 03:52:06
Also try a full cmos clear as well.
Thank you for that tip, the Full CMOS Clear, that seem to do it for me, appreciate the FAST response.
Mitchman
Board: MSI 890GXM-G65 (Model No. MS-7642)
Bios: Version 1.x
VGA: Integrated ATI Radeon HD4290 GPU
PSU: 500w ATX 2.03 ver (ATX-CW500WP4)
AMD Phenom II X4 965 Black Edition (Quad Core)
MEM: Corsair Vengeance 4x4gb CML16GX3M4A1600C9B
HDD: Seagate 1tb sata
OS: Windows 7 64bit Ultra

Help me for msi gx60 destroyer

I have the following problems. Please help!
1: my notebook is msi gx60 destroyer
but vga r9 m290x in gpu-z Is not (gpu clock: 900 - memory: 1250), bandwidth : 160. gb/s
my is in gpu-z --> gpu clock : 950 - memory : 900 !!!
what?!!!!
Please help me and let me take a picture of mine(gpu-z).
2:Contrast is the difference in battery mode when the power cable is connected.
Are you one of the numbers is the contrast of the display is higher battery is bad. What can I do?
I have this problem in Windows 7 and Windows 8.1. The driver is the latest version.
3 : How hard Ssd raid, is how to install Windows? I do whatever I want to install Windows from my driver! Where can I get the drivers?
Thank you

Ok, I got word back from my MSI rep. Apparently, it's a limitation on the RAM that is used for the video card. Other laptops that use the HD8970M or R9 M290X that are not MSI suffer from this as well. This is an AMD goof-up, not MSI's, so don't get mad at MSI. The rep said that they tried to overclock to 1200MHz, but got BSOD's all the time. The rep assures me that the gaming experience is minimally affected (so nothing you'd notice, like 1-2 FPS difference)

Msi GX60 (AMD Radeon 7970M Graphics PROBLEM)

Ok so I got this laptop as a gift awhile back. Ever since I have never been able to get the dedicated graphics working. The Radeon HD 7970M. I've tried disabling the integrated and the screen kinda glitches up and freezes so I just turned it off and when it was turning off it decides to configure windows (believe this happens everytime i disable it). When I turn it back on I get this amd driver error called "Graphics" and this is what it says, "No AMD graphics driver is installed, or the AMD driver is not functioning. Please install the AMD driver appropriate for your AMD hardware." I have tried doing this many many times, uninstalling and reinstalling different drivers for it and it still does not want to work. Whenever I disable the integrated the dedicate also shows this little yellow triangle in device manager. I heard the specs on the msi GX60 are pretty nice and I'd really love to use it's power, i'd very very VERY much appreciate the help! it would mean everything to me.
Oh and one more thing, in device manager when I right click on it and go to properties it says this under "Device status" Windows has stopped this device because it has reported problems. (Code 43)
I'll be on all day checking this thread, I am definitely capable of giving more information if needed! i'll just need some directions

oh and ever since i got the computer brand new, windows update will not work.
"Downloading updates..."
"Downloading 62 updates (0 KB total, 0% complete)
and it stays like this. yes I have connection to the internet, everything else can connect.
maybe it has something to do with the graphics card problem i'm having?

Could not launch ObjectEditor in MSIE - Internal Server Error 500

<b>Hi there,</b>
I have developed a xApp with the help of the tutorial "My first xApp" and I failed accessing the UI pattnern of the ObjectEditor
using the MSIE. The error page says "500 Internal Server Error".
Strangely enough, it was possible launching the ObjectEditor in the Firefox Browser, however Firefox hides certain buttons,
which makes impossible to configure the UI pattern.
Can anyone tell me, what the following error message means, that was displayed in the MSIE? How can solve the problem?
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.IllegalArgumentException: unknown format type at
    at java.text.MessageFormat.makeFormat(MessageFormat.java:1426)
    at java.text.MessageFormat.applyPattern(MessageFormat.java:447)
    at java.text.MessageFormat.<init>(MessageFormat.java:347)
    at com.sap.caf.ui.ptn.common.components.configtoolbar.views.ConfigurationEditorToolbarCV.wdDoInit(ConfigurationEditorToolbarCV.java:110)
    at com.sap.caf.ui.ptn.common.components.configtoolbar.views.wdp.InternalConfigurationEditorToolbarCV.wdDoInit(InternalConfigurationEditorToolbarCV.java:176)
    ... 40 more
Thx!

Hello Bertram,
I had not created or edited any messages, and after the first Build there did not exist any WebDynpro Component in the project tree, thus, there is no Message Pool as described on the help page that you recommended. What messages do you mean?
It is really strange that I can invoke the ObjectEditor through
...webdynpro/dispatcher/sap.com/caf~UI~ptn~objecteditor/ObjectEditor
(blank page with one button showing "Close"), but not the ObjectEditorConfig nor the ObjectBrowserConfig.
Regards, Marco

Please help me with this error: "Apple application support was not found... Error 2"

Can anyone please help me with this error: "Apple application support was not found... Error 2"
I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
"Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
Thank you

iTunes "Apple Application Support is required... Error 2" and possible fix.
I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
If it helps you please like this so others can find it.

Connectivity problem with MSI GX60

Good morning, gentlemen,
9 months ago I bought me a Steelseries MSI GX60. Everything was working quite fine, but after four months I started to have complications with my wifi, as it was saying, that I have excellent signal, but I could not load any page. When it happened first, I thought I was not careful enough and caught some sort of virus, so I checked the system with a few programs. For a week let's say everything was fine. Then I had to reinstall the system completely. Today it is the third time that my connection has been slowed or cut off. What to do, I am starting to think it's some hardware complication and not just a virus. Any help? Thank you.

relax. The most common issue that couses writers not be able write at full speed is the DMA setting. Make sure that u have DMA enabled. go to your device manager -->IDE/ATAPI controllers and make sure the IDE channel that your drive is connected is DMA enabled. Also make sure that u have connected your drives as "MASTER" in the IDE bus.
also make sure that the disks u are using are validated for 48x speed. Try using other media brand.
report back

MSI GX60 problem sata3 HDD

I have a problem with with the 500 GB hdd Hitachi Travelstar Z7K500 HTS725050A7E630 in one of the slots in the laptop GX60 (slot DVD drive). The Russian Support Center could not help and advised to contact with support center - "for the objective diagnosis of faults." Do you have any information about such kind of problems with Laptop GX60 especially SATA 3? Or maybe, there is any solution to update the BIOS? This slot at the time of purchase worked WD5000BPVT sata 2.Also that slot been tested with SATA 3 ssd ADATA XPG SX900 128GB. And operates smoothly.
Hitachi 500GB Travelstar Z7K500 HTS725050A7E630 status -OK. And it works in the slot below the touchpad mode sata 3. But it is in that slot is reversed. What is extremely may affect its long performance.
Why in the slot under the DVD drive is a conflict with a 500GB hdd Hitachi Travelstar Z7K500 HTS725050A7E630?
Laptop model MSI GX60 1AC-007X bios 508 firmware 502

Hi ya,
Why did you feel you needed to change drive defaults?
Normally, hard drives are factory set to maximum compatibility. Sata I / II
You could also have defective cable........
Or many other problems............ no one will know with full system spex..........
Del

Clean Install of Preloaded Windows 8 on HDD to SSD (MSI GX60)

Good Morning Guys!
This is my first post here so I'll try my best to explain my problem / confusion coherently.
I recently ordered a MSI GX60 off ExcaliberPC. I haven't gotten it yet but my plan is to install a new 2.5" Cosair Force 3 120 GB SSD making it my primary hard drive and transferring the HDD to a secondary bay. I would want to use the same Windows 8 product key that came with the lappy obviously. Reason why I'm not doing a clone is because I heard that there might be some performance issues. Also want to remove all the bloatware and crapware that came with it.
So I have a few questions:
1) Are the mounting brackets provided by the laptop or do I have to purchase them myself?
2) I heard that the Windows 8 product key is embedded in the BIOS; which means I just have to do a clean install and it should automatically be activated? Does the same apply to Microsoft Office?
3) In which order do it? Install SSD into primary bay, relocate HDD to secondary bay then do a clean install on SSD first and clearing out the HDD after? or clear out HDD first then do a clean install after swapping in SSD into primary bay?
4) If the product key is indeed embedded in the BIOS, would updating the BIOS risk erasing out the key?
5) If my laptop completely dies, is there any way to retrieve the Windows 8 product key from the BIOS?
Appreciate all the help I could get!!!

Quote from: nathan.risto on 07-September-13, 23:31:42
I'm trying to do a clean install of windows 8 myself and I too am confused about the license being embedded. How do I get the license for my laptop? I installed Win8 clean and now I can't seem to get it to activate.
>>Please read and comply with the Forum Rules.<<
Start your own thread......

MSI GX60 3BE and SSD/HDD (RAID0, height 7/9,5 mm)

Dear Friends
Please answer the following questions, if you don't mind:
1. Will SSD or HDD with a height of 9.5 mm will fit the MSI GX60 3BE, or only 7 mm?
2. Is it possible to use RAID 0 with 2xHDD? Are the drivers are included on the DVD, so I can install Windows 7? As far as I know during the installation of Windows 7 you need to specify the path to the drivers for RAID?
Thank you in advance for your replies.
Best regards.
Sincerely

Hi, Thanks for your reply.
But it is in fact a 2.5" SSD (no typo in my first post), but has only 7.5mm height. ((There will also be some 1.8" ssd models available in the future but I ordered the now available 2.5") ). So such an adapter will not help. For this mentioned SSD-bracket, I have to wait for my x200t being shipped (hope its coming soon) but I didn't see anything like that on any ibm/lenovo accessory page.
Edit: Kind of solved itself today when I got the SSD. It's in fact 7.5mm in height but there is a small 2mm frame mounted around it (which one could unscrew, if necessary). So in the end it's a "normal" 2.5" 9.5mm device
Regards
Message Edited by Elador on 11-28-2008 02:57 AM

[Solved] Network problems with MSI GX60 Destroyer, killer newtork LAN and wireless

Hi, I bought a MSI GX60 Destroyer 2 weeks ago, and I realized that my internet was a little slow, you don't realize in the web but when downloading it doesn't perform how it should, I tested the speed now with wireless and I got 5 mb/s, and I have 20 mb/s in my house (I also tested with cellphones and other pc's), with LAN the speed was normal, so I saw some forums about the Killer network, I tried to change the drivers but nothing, the wireless is limited to 5 mb/s and now my LAN too.... please help, my phone has 4x better internet than my GAMING Laptop.
Also the Atheros drivers are a pain in the ass it's really hard to remove them.
I'm now with the drivers without the Management app.

Quote from: hch;109858
Hi Tzin,
Which graphics driver are you using?
The quick stream is installed on the notebook with the generic graphics driver from the AMD website.
If you install the AMD's generic graphics driver, you'll find the quick stream program in your Uninstall programs window.(Control Panel> Uninstall a program)
Hi hch , i only can find the "amd cystal manager " under the unintall a program , so when i click into in then only saw the device but dont see the quick stream .

Msi gx60

Hi there
I recently updated my msi gx60 to windows 8 from windows,i began having screen flickering when playing games i updated my drivers and it didnt work and i also lost my switchable configurable graphics settings
Thanks
Sent from my GT-N7100 using Tapatalk

One thread is enough.
Try posting your problem so people can try to help:
>>Posting Guide<<

MSI FX5600 'drawing error'

Hello all - I just purchased a MSI GF FX5600 128 w/VIVO and I am having some problems getting it to work with more than 4 bits of color and 480 x 640 resolution.
When I install the new card, Windows XP pro boots fine, and the windows splash screen looks good. The log on screen is a beautiful 1024x768. When I pick my username, my desktop loads, but after about three seconds, everything 'pixelates' and the system freezes and reboots.
I throw my old GF MX200 in, and Windows goes through the system check and then boots to the splash screen. I log in and windows find the 'new' hardware (the original old card).
I uninstalled all the old drivers and shut down. I installed the new FX5600 and booted up. I can get into windows this way with 480x640 res. and 4 bit color, and by going to the device manager, windows sees the MSI FX5600. However, when I try to install the drivers and reboot, I get the same problem as above (after about 3 seconds, windows pixelates and I have to restart it). I have tried drivers that came on the CD with the card, drivers from Nvidia, and drivers from MSI's website. Same result.
When I put my old card back in to try to find help, I receive an error box from windows, telling me "The driver for the display device was unable to complete the drawing operation" Error signature is "szAppName: Drivers.Display szAppVer: 10DE0312A191231462 szModName: nv4_disp.dll szModVer: 6.14.1.4345"
Any help would be GREATLY appreciated!
Oh - I am running Athlon 1.4 Ghz, ASUS A7M266 mobo, 300 w/power supply, 512 DDR ram.
Thanks!

The card was running at 4x. Thanks for the suggestion tho. I did finally get the card working - somehow, by uninstalling old drivers, rebooting, letting windows find the old card, then putting the new FX drivers on the old card. Then when it asked to reboot, I shut down and installed the new card. This allowed the new card to be used okay.
However, i am still having issues playing games, much like snorbitz explains in his post.

Msi gx60 screen flickering

Help my msi gx60 is having screen flickering when playing games.updated drivers didnt work.and when i update my drivers the configurable switchable graphics is gone.
Sent from my GT-N7100 using Tapatalk

No 6GB and 3GB versions do not share the same vbios. Add copy of your vbios and S/N.
Try disabling CPU core parking as some users reported that it solves such flicker issues as seen in your video:
http://bitsum.com/about_cpu_core_parking.php
http://www.coderbag.com/Programming-C/Disable-CPU-Core-Parking-Utility

HELP MSI GX60 webcam error

Similar Messages

Maybe you are looking for