Help! Multiple Displays not Working. (Mac Pro late 2013).

Hardware:
Late 2013 Mac Pro
Processor: 3.7 GHz Quad Core Intel Xeon E5
Memory: 12 GB 1867 MHz DDR ECC
Graphics: AMD FirePro D300 2048 M8
Software: OS X 10.9.2 (13C64)
Displays:
4 LG Electronics S-Class 25UM64-S 25-Inch Screen LED-Lit Monitor's
Display Connection:
6 Moshi Mini DisplayPort to HDMI Adapter (4K)
Issue:
First of all, thank you in advance for taking the time to help!
I just picked up this Mac Pro (as stated above) and I am having quite the time trying to get the monitors to display properly (or at all!)!
Everything is hooked up properly (i'd like to think so), i've run through most of the trouble shooting methods I can think of and have found online... and still, 2 of the 4 displays do not show! The Mac Pro is not recognizing two of them.
I was told that the MacPro could recognize up to 6 Mini DisplayPort to HDMI monitors, however, only 2 are working properly. Is it because of the Moshi Mini DisplayPort to HDMI adapters? Should I be running MDP to DP cables instead? The monitors support DisplayPort input's, however, they also allow for PIP hence the use of 6 MDP adapters to HDMI. (2 of the monitors are using the built in picture in picture split screen. So 2 HDMI inputs each).
Really pulling my hair on this one.. I figured it would be plug and play.. at least, that's how apple USED to be.
Any ideas?! Am I simply needing to use the MDP to DP cables instead of MDP to HDMI? Please help!
Thank you!

See:
Mac Pro (Late 2013): Using multiple displays - Apple Support
Can I connect more than 2 DVI or HDMI displays?
Mac Pro supports a total of two DVI or HDMI displays when connected via the built-in HDMI port or using the Apple Mini DisplayPort to DVI adapter. To connect additional DVI displays, use an active DVI adaptersuch as the Apple Mini DisplayPort to Dual-Link DVI adapter. You can connect up to six active adapter DVI displays. This requires a powered USB hub since Mac Pro offers four USB ports and you will need six to connect them all.
Thus, use a display port to mini display port cable

Similar Messages

Intermittent HDMI signal on my Mac Pro late 2013

Brand new Mac Pro. Used for short periods of time for a week with no problems. After these few days, during a little bit longer session of work, I got display problems. Intermittent output signal by HDMI cable with image disappearing from monitor and coming back for some times. Problem occurred both in 720P and 1080i mode. The problem appeared and disappeared for several times. During one of this occasions also some bad green pixel remained stuck on the display.
Left the Mac on for all the night, this morning I do not notice any problem. Does anyone knows which kind of problem I got??
It seems to be a graphic card problem isn't it??
Thanks for help to everyone.
System: Mac Pro late 2013 - 6-core - 32 Gb ram - 512 Gb HD - FirePro D500 3 GB - Mavericks 10.9.5

Nothing connected to Thunderbolt ports.
Do I need to to reset SMC and PRAM anyway??
The Mac is connected to the Tv/monitor through my Bose LifeStyle.
Bose LS is setted to 1080i resolution and upscales the signal of the mac when in 720p.
Already tried at 1080i on 1080i and changed HDMI plug but problem shortly occurred.
Same device used in tha same way for years with Mini Mac without problems.
Is it possible there is some conflict between output of the Mac PRO HDMI and Bose LS??

Fix for blurry text on Dell 30" U3014 connected by DisplayPort to Mac Pro (late 2013) AMD D700

Just connected my new Mac Pro (late 2013) to my Dell 30" U3014 with DisplayPort cables, only to find blurry text and bad gamma etc.
Whilst the earlier post/discussion Mac Pro (8 core with the D700 GPU's) (Dell U2713H) was somewhat illumative, I thought a simple list of links for this specific configuration might help someone.
The Ruby script, modified for D3014 can be found at post http://embdev.net/topic/284710#3153072
If you're impatient like me, don't forget to copy the created Folder to /System/Library/Displays/Overrides before rebooting. Thanks to Blurry text on Dell Monitor + Mac OS X | Danilo Ercoli
Piers

Hi Grant,
Thanks for taking the time to think about my issue and respond. But I don't see where your response is relevant.
I want to connect two monitors, each via Mini-Display Port, and only one will work at a time. I am not using DVI cables at all. In this article, http://support.apple.com/kb/HT6068, it clearly states that I can connect three monitors via Thunderbolt (mini-display port) as long as they're on different busses. I was doing that, and it didn't work.
What display configurations can I use with my Mac Pro (Late 2013)?
You can connect up to six displays to your Mac Pro (Late 2013) running Windows 8 via Boot Camp. Check the list below to be sure you're setting up your displays in a supported configuration via the HDMI and Thunderbolt ports.
You can connect:
Six Apple LED Cinema Displays (27-inch) or third-party displays via Thunderbolt. For best results, attach displays to different Thunderbolt busses when possible (see figure below).
Three Apple Thunderbolt Displays (27-inch). Connect only one per Thunderbolt bus (see figure below). Note: You could connect three more LED Cinema Displays (27-inch) or third-party displays, one per Thunderbolt bus, for a total of six displays.
Two Apple Thunderbolt Displays (on Thunderbolt bus 1 and 2) and one 4K Ultra HD TV using HDMI.
Two 4K displays (on Thunderbolt buses 1 and 2) and one 4K Ultra HD TV on HDMI).

ATI catalyst drivers not working properly in Mac Pro late 2013

Hi, I have a 6-core Mac Pro late 2013 with two D500 ATI graphics cards and installed Windows 8.1 Pro through bootcamp. I have installed the bootcamp drivers while in windows installation, however there is a problem opening the Fire Pro drivers (catalyst drivers). I get a message that says something like "there is no option to change so the software will not run". I also tried to download the ATI drivers directly from their site, but still get the same problem.
This poses a problem for me since I need windows for a specific lighting design software that I work with -Dialux-, and it uses Open GL, which doesn't seem to work in my configuration. Does anyone have any similar problem or solution?
Please help. Thanks.

Does the reader show up under USB in System Report?
If the reader is working properly both the reader and an inserted card will show up.

Display does not work mac pro

I tried connected 4 27" LG 1080p monitors to the mac pro (Late 2013), only two come on at a time no matter what ports i use. All the monitors have come on at least once but not all at the same time. Is there something I need to do? Also under system report it shows both graphic cards but the displays only show up on one card regardless of port. any ideas?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

After Effects is NOT using the full Twelve GB of memory on my Mac Pro late 2013 dual video cards

I would like to know if there is a reason why AE CC12 and CC13 (2014) is not using the full amount of video card memory on my MP late 2013. It's six GB per freaking card I invested in and its not accessing it.
Is there a work around this issue?

Why shouldn't it. When I upgraded to this new Mac Pro late 2013 with its dual video cards. Premier turned into a blasting fast editor. I no longer need to render my edited cuts and the scrubbing of preview and timeline footage is phenomenal. The only performance boost I've seen in AE with this new system is in rendering and I can't even say its double as fast in comparison to Premier or Encoder and its an 8-Core system with 32GB of ram. Everything else is flying.
So again to answer your why should it. I rebuttal with "Why shouldn't it". The other two mentioned programs are using GPU resources to improve performance why is AE so behind the curve.
I'm not the only one asking why. I was in the audience at a Dmala meeting here in LA with Todd Kopriva and Al Mooney previewing AE and Premier 2014.
People kept asking Todd about performance boost in between questions about new features. Todd finally just asked what do you prefer a couple of new features or performance boost. Everyone wanted performance boost over new features. If you think I'm making this up go ask Todd Kopriva.

Mac Pro (Late 2013) Keeps Crashing Please Help

My new Mac Pro (Late 2013) keeps crashing when I use thunderbolt devices.
My set up is as follows:
8-Core
512 SSD
Dual AMD 700 GPU
64 GB Ram
It usually occurs when I am using any of the Adobe programs for video editing and rendering. I have check disc utility and found no errors. Needless to say this is getting quite annoying as I use this machine for work and sometimes can't get through anything because it keeps crashing.
What do I do?

Just happened again. This is what it says:
Anonymous UUID:       51D5171F-CF6C-C4BE-82BD-E6597F55DFE5
Thu May 1 10:46:50 2014
Machine-check capabilities: 0x0000000001000c1b
family: 6 model: 62 stepping: 4 microcode: 1059
signature: 0x306e4
Intel(R) Xeon(R) CPU E5-1680 v2 @ 3.00GHz
27 error-reporting banks
Processor 0: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 1: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 2: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 3: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 4: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 5: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 6: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 7: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 8: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 9: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 10: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 11: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 12: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 13: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 14: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
Processor 15: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC7_STATUS(0x41d): 0xbe00000000010092
IA32_MC7_ADDR(0x41e):   0x00000001323ca340
IA32_MC7_MISC(0x41f):   0x00000001405c5c86
panic(cpu 3 caller 0xffffff801b0dc709): "Machine Check at 0xffffff7f9cbd0b29, registers:\n" "CR0: 0x000000008001003b, CR2: 0x0000000111da7000, CR3: 0x000000002df83000, CR4: 0x00000000001606e0\n" "RAX: 0x0000000000000020, RBX: 0xffffff80a1019000, RCX: 0x0000000000000001, RDX: 0x0000000000000000\n" "RSP: 0xffffff87308b3d40, RBP: 0xffffff87308b3d70, RSI: 0x0000000000000001, RDI: 0xffffff80a0ea0a00\n" "R8: 0x0000000000000000, R9: 0x0000000000000006, R10: 0xffffff8731783de0, R11: 0xffffffffffffffff\n" "R12: 0xffffff80a0fda6c0, R13: 0x0000000000000006, R14: 0xffffff7f9cbe5e20, R15: 0x00000000000007b0\n" "RFL: 0x0000000000000046, RIP: 0xffffff7f9cbd0b29, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2422.92.1/osfmk/i386/trap_native.c:1 68
Backtrace (CPU 3), Frame : Return Address
0xffffff8726d65e80 : 0xffffff801b022fa9
0xffffff8726d65f00 : 0xffffff801b0dc709
0xffffff8726d66060 : 0xffffff801b0f3c1f
0xffffff87308b3d70 : 0xffffff7f9cbc1663
0xffffff87308b3e70 : 0xffffff7f9cbc0899
0xffffff87308b3f30 : 0xffffff801b0dd73c
0xffffff87308b3f50 : 0xffffff801b0375ba
0xffffff87308b3f90 : 0xffffff801b037908
0xffffff87308b3fb0 : 0xffffff801b0d7047
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelCPUPowerManagement(216.0)[70947979-EA9B-39D1-AD15-CD AB19F031AF]@0xffffff7f9cbbe000->0xffffff7f9cbe8fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13C1021
Kernel version:
Darwin Kernel Version 13.1.0: Wed Apr 2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
Kernel UUID: E9CF78E2-1E9F-3B6F-81A4-FEE6C6D0E4D5
Kernel slide:     0x000000001ae00000
Kernel text base: 0xffffff801b000000
System model name: MacPro6,1 (Mac-F60DEB81FF30ACF6)
System uptime in nanoseconds: 12337930919
last loaded kext at 11985022345: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f9b953000, size 65536)
loaded kexts:
com.nvidia.CUDA          1.1.0
com.promise.driver.stex          5.2.7
com.apple.filesystems.msdosfs          1.9
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleBluetoothMultitouch          80.14
com.apple.iokit.IOBluetoothSerialManager          4.2.3f10
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AGPM          100.14.15
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.ApplePlatformEnabler          2.0.9d1
com.apple.driver.AppleHDAHardwareConfigDriver          2.6.0f1
com.apple.driver.AppleHDA          2.6.0f1
com.apple.driver.AppleGraphicsDevicePolicy          3.4.35
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.kext.AMDFramebuffer          1.2.0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIntelMCEReporter          104
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.AppleUSBDisplays          360.8.14
com.apple.iokit.IOBluetoothUSBDFU          4.2.3f10
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.driver.AppleMGPUPowerControl          3.4.35
com.apple.AMDRadeonX4000          1.2.0
com.apple.driver.AppleThunderboltIP          1.1.2
com.apple.kext.AMD7000Controller          1.2.0
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.AppleUSBOHCI          656.4.1
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.driver.XsanFilter          404
com.apple.driver.AppleUSBHub          666.4.0
com.apple.iokit.IOAHCIBlockStorage          2.5.1
com.apple.driver.AppleUSBXHCI          670.4.0
com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
com.apple.driver.AirPort.Brcm4360          831.21.63
com.apple.driver.AppleUSBEHCI          660.4.0
com.apple.driver.AppleAHCIPort          3.0.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.1
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.kext.triggers          1.0
com.apple.driver.IOBluetoothHIDDriver          4.2.3f10
com.apple.driver.AppleMultitouchDriver          245.13
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.driver.DspFuncLib          2.6.0f1
com.apple.vecLib.kext          1.0.0
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOSurface          91
com.apple.iokit.IOBluetoothFamily          4.2.3f10
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.7.0d10
com.apple.driver.AppleUSBAudio          2.9.5f4
com.apple.iokit.IOAudioFamily          1.9.5fc2
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.iokit.IOFireWireIP          2.2.6
com.apple.driver.AppleGraphicsControl          3.4.35
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.4.1
com.apple.driver.AppleHDAController          2.6.0f1
com.apple.iokit.IOHDAFamily          2.6.0f1
com.apple.iokit.IOAcceleratorFamily          98.14
com.apple.driver.AppleSMC          3.1.8
com.apple.driver.AppleThunderboltEDMSink          2.1.3
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.kext.AMDSupport          1.2.0
com.apple.AppleGraphicsDeviceControl          3.4.35
com.apple.iokit.IOGraphicsFamily          2.4.1
com.apple.driver.AppleUSBHIDKeyboard          170.15
com.apple.driver.AppleHIDKeyboard          170.15
com.apple.iokit.IOUSBHIDDriver          660.4.0
com.apple.driver.AppleThunderboltDPOutAdapter          3.1.7
com.apple.driver.AppleThunderboltDPInAdapter          3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily          3.1.7
com.apple.driver.AppleThunderboltPCIUpAdapter          1.4.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.5
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          656.4.1
com.apple.iokit.IOSCSIParallelFamily          3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.driver.AppleThunderboltNHI          2.0.1
com.apple.iokit.IOThunderboltFamily          3.2.7
com.apple.iokit.IOUSBUserClient          660.4.2
com.apple.iokit.IOEthernetAVBController          1.0.3b4
com.apple.iokit.IO80211Family          630.35
com.apple.driver.mDNSOffloadUserClient          1.0.1b5
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOUSBFamily          675.4.0
com.apple.iokit.IOAHCIFamily          2.6.5
com.apple.driver.AppleEFINVRAM          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          23
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1
Model: MacPro6,1, BootROM MP61.0116.B05, 8 processors, 8-Core Intel Xeon E5, 3 GHz, 64 GB, SMC 2.20f18
Graphics: AMD FirePro D700, AMD FirePro D700, PCIe, 6144 MB
Graphics: AMD FirePro D700, AMD FirePro D700, PCIe, 6144 MB
Memory Module: DIMM1, 16 GB, DDR3 ECC, 1867 MHz, 0x802C, 0x33364A534632473732505A2D314739453120
Memory Module: DIMM2, 16 GB, DDR3 ECC, 1867 MHz, 0x802C, 0x33364A534632473732505A2D314739453120
Memory Module: DIMM3, 16 GB, DDR3 ECC, 1867 MHz, 0x802C, 0x33364A534632473732505A2D314739453120
Memory Module: DIMM4, 16 GB, DDR3 ECC, 1867 MHz, 0x802C, 0x33364A534632473732505A2D314739453120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x135), Broadcom BCM43xx 1.0 (6.30.223.154.63)
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en2
PCI Card: AMD FirePro D700, Display Controller, Slot-1
PCI Card: AMD FirePro D700, Display Controller, Slot-2
PCI Card: pci105a,8760, RAID Controller, Thunderbolt@79,0,0
PCI Card: Apple 57761-B0, Ethernet Controller, Thunderbolt@234,0,0
PCI Card: pci11c1,5901, IEEE 1394 Open HCI, Thunderbolt@233,0,0
PCI Card: pci12d8,400e, USB Open Host Controller, Thunderbolt@239,0,0
PCI Card: pci12d8,400e, USB Open Host Controller, Thunderbolt@239,0,1
PCI Card: pci12d8,400f, USB Enhanced Host Controller, Thunderbolt@239,0,2
Serial ATA Device: APPLE SSD SM0512F, 500.28 GB
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Keyboard Hub
USB Device: Apple Keyboard
USB Device: Hub
USB Device: FaceTime HD Camera (Display)
USB Device: Display Audio
USB Device: Apple Thunderbolt Display
Thunderbolt Bus: Mac Pro, Apple Inc., 19.2
Thunderbolt Device: Pegasus2-R, Promise Technology, Inc., 3, 19.2
Thunderbolt Bus: Mac Pro, Apple Inc., 19.2
Thunderbolt Bus: Mac Pro, Apple Inc., 19.2
Thunderbolt Device: Thunderbolt Display, Apple Inc., 3, 26.2

My Mac Pro (Late 2013) with an Apple SSD as the only storage will not restart

I have a Mac Pro (Late 2013) with an APPLE SSD SM0256F as the only storage. When I restart all I get is the spinning bars. I have to manually hold the power button down to force shutdown. I have let it try to restart for as long as 30 minutes. It will start just fine from a shutdown. I am running Yosemite 10.10.2 (14C1510). I have used Disk Utility with no errors. The only time I need to restart is after a system upgrade. I have tried, as others have suggested, selecting the drive from the Startup Drive preferences with no difference. Any help is much appreciated!

Try resetting the SMC and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Next note the time of text problem and then after reboot open the Console app and look for log entries at that time. Post suspicious ones here

USB Card Reader not recognized on new Mac Pro (late 2013)

My Sony USB multi-card reader (model: MRW62E), which I use for SD cards mostly, works on my MacBook Pro (Retina, Mid 2012), my new iMac, and my old Mac Pro (2009), via the USB ports, but is unrecognized entirely on my new Mac Pro (late 2013). All machines are running OS X Yosemite 10.10.2. Neither the card reader, nor the cards appear at all in FCP, image capture, apple system profiler, the desktop, or disk utility. I cannot find any drivers online addressing the issue, including Sony's website.
Perhaps an additional update for increased compatibility vis-a-vis the new Mac Pro would do the trick...

Does the reader show up under USB in System Report?
If the reader is working properly both the reader and an inserted card will show up.

Can iMac 27 late 2009 enter TDM connected to a Mac Pro late 2013?

I'm trying to get an iMac 27 late 2009 to enter target display mode when connected to a Mac Pro late 2013.
I tried with Apple's Thunderbolt cable and pressing Command + F2 on the iMac did nothing.
So I bought a Mini DisplayPort cable, and now Command + F2 makes the iMac's screen turn black for a second and then back.
After rebooting, before logging in, if I press Command + F2 it actually works for about 2 seconds and then back to the iMac's screen. After this, if I keep trying it just flashes black.
So, my question is, has anyone managed to connect this two devices?
Should I buy another cable? Format the iMac? Any suggestions?
Thanks for the help.
OS X Mavericks 10.9.4 on both machines.

Thanks for your help.
I don't know what more I can add to the initial post.
The second Mini DisplayPort cable that I tried is Belkin, I don't think there are better cables for this, since Apple is not selling it anymore.
I did mentioned that if I restart the iMac, before logging in with any user, pressing command + F2 or simply connecting the cable will actually work, it shows up as a second display on the Mac Pro, I can move the mouse pointer on the iMac. But after about 2 seconds the iMac exits Target Display Mode, and after this pressing Command + F2 will only turn iMac's monitor black for about a second and not entering TDM anymore.
I even checked the firmware versions and both are up to date according to this.

Running 4 screens as one with Mac Pro Late 2013

Hello there, got a Mac Pro late 2013 edition driving 4 60" 1080P screens in a 2x2 configuration. Trying to make those work as one 4k display. Was able to get it working to allow us to display a page across all 4 displays. But have not been able to get a video to display across all 4. Our current configuration has also been very finnicky and anytime we move the webpage around, it snaps the window to be full screen across the bottem two displays.
Anyone have any idea's as to how to make this work the way we are wanting to?

"Fullscreen" is a garbage feature ported from IOS and the iPhone, the land of tiny screens and one-at-a-time processing -- AVOID it at all costs.
This will work as long as you stretch a Window across multiple screens, and turn OFF all hints that you want multiple, independent screens.
This describes the new ways Mavericks tries to undercut the way it used to work:
OS X: Using Multiple Displays in Mavericks

How can Mac Pro (late 2013) create a WiFi network for Mac Books to connect to internet?

I am moving my Mac-Pro (late 2013) to a garden office. I have an ethernet cable to connect it to the house network. I also have a Mac Book Air which will only connect to a network by WiFi. I can use this Mac-Pro to create a WiFi network and the MacBook can talk to the Mac Pro over this WiFi network. But the Mac Book does not see the local network let alone the Internet, both of which are seen on the Mac Pro.
Is there a way that I can connect the created WiFi network to one of the two Ethernet cards in the Mac Pro?
Or what?
Tim

I have half cracked it.
For some reason the first step it to turn internet sharing off.
Then internet sharing can be configured and the wireless network set up and given a password.
Then, and then only, turn internet sharing back on and turn WiFi ON. All this is on the Mac-Pro (late 2013).
Now the Mac Air sees the new network and can log on and connect to the WAN internet locations, at least via Safari.
BUT if I use Finder on the Air, it will connect to the Mac Pro but it will not display what is on its disc. Though I can do screen sharing. Odd.
Also Air-Drop has stopped working, so there is no means of transferring files between the Pro and the Air.
I am going away now for a few days and will revisit this on my return.
Thanks for your help.

HT5918 Mac Pro (Late 2013) Dual monitors freeze on startup?

I've got 2 monitors, 1 HDMI and 1 MiniDisplayPort/DVI into Thunderbolt, and the computer can't start, it crashes during the boot process. The main screen freezes just as the login comes up, the MDP screen is scrambled, and the mouse cursor is a spinning pizza.
The only solution so far is to remove the MDP cable during startup, but that is a dealbreaker because dual monitors is the sole reason I bought this, and c'mon it's a really expensive computer -- even my old MacBook could handle 2 monitors!
Any insights or solutions appreciated.

Have you tried another cable and adapter?
Try another DVI monitor to help determine the cause
Are you using a Thunderbolt port not shared with the HDMI port?
See the image included here:
Mac Pro (Late 2013): Using multiple displays
Rest the SMC
Intel-based Macs: Resetting the System Management Controller (SMC)

Mac Pro Late 2013 Cubase 8 Problems

Hello
I'm currently running Yosemite on the late 2013 Mac Pro.
I'm having major issues with Cubase 8.
When i select my Virus TI Channel, the whole program crashes. Sometimes it just randomly crashes.
Also, vst2 plugins are really laggy, and i can't figure out the problem, vst3 is fine. happens on 32bit and 64 bit version of cubase.
I tried reinstalling everything (including a clean OSX) but didn't help.
Back on mavericks i also had the VST2 laggy problem, but i had no problems with the virus ti at all.
I can't continue any of my projects now because it's just crashing when selecting the virus ti channel. (It does in empty projects aswel)
I tried different virus ti drivers, but that doesn't help at all. I know people that are using cubase 8 on yosemite with the virus and they have no problems, so i'm pretty sure it's not because of that.
Sometimes when i'm on skype for example, it freezes. when i quit it and try to reopen it the icon just keeps jumping in the dock. This also happened with chrome and twitter a few times, maybe the problems are connected with eachother? i don't know, just giving as much information as i can, because i really want this fixed. Cubase is showing crashlogs after it crashes but i can't figure out what it means.
Today i saw something in the crashlog about my graphicscard (2x AMD FirePro D300) could this mean something?
Anyone that could help me out here please? cause i've no idea what else to do.
Oh btw, i tried studio one aswel, the VST2 Lag problem is also happening in there.
My setup -
Mac Pro Late 2013
OSX Yosemite
12 GB Ram
Quad-Core Intel Xeon E5
2x AMD FirePro D300
Cubase 8
Virus TI Snow
MOTU 828 MK3 Hybrid
Greets!

I was using a hub, so I immediately removed that upon the first issues. But the USB has still frozen after the removal of the hub. The HD is a self powered G-Tech drive. I'll have to play around a bit more will all of your suggestions this weekend.
I woke up the computer just now to check the discussion, an am greeted with a notification from Mavericks that the "Disk Not Ejected Properly. (Eject disk before disconnecting or turning it off)" which the disk is still connected, and the usb seems to still work fine. In fact I was able to unplug the USB cable for the G-Tech HD, and then replug it in, everything reappeared fine. The USB bus was not frozen (this time).
But it's this kind of flakiness that has me coming and going. I haven't (yet) been able to identify whether the USB is the problem or the driver or a third thing I haven't figured out...

Mac Pro Late 2013 OpenCL GCD Crossfire

I want to buy a Mac Pro Late 2013 to do Calculation With Boinc (system to give CPU time for university research)
Some Boinc App use OpenCL and calculations are done on the GPU.
The new Mac Pro having 2 video card, will those App be able to use both GPU ?
I do have some doubt since reading this
New Mac Pros support AMD's CrossFire GPU teaming, but currently only within Windows
http://appleinsider.com/articles/14/02/07/new-mac-pros-support-amds-crossfire-gp u-teaming-but-only-within-windows
from the text,
Without CrossFire, apps and games running on the Mac Pro must be custom written to take advantage of the two GPUs. According to AnandTech, Apple has configured the Mac Pro so that "by default, one GPU is setup for display duties while the other is used exclusively for GPU compute workloads."
Any though ? :-)
Thank You

Yes, I agree, this is only a home server that I access both at home and when I am on the road.
But I stop calculation when I need to have a web server (rarely :-) .
if i understand correctly,
you do 700k credits a day on your 2010 MP with the dual Nvidia Quadro K5000s
and
around 200k credits a day on your 2013 MP with the dual D300
Do you think is it all about driver or cuda vs opencl.
I must say that I am happy at least to learn that MP2013 GPU work on Boinc
What is your link on boinc
mine is
http://boincstats.com/en/stats/-1/user/detail/3702/projectList
I have been doing calculation not only on boinc but other. I started back in the days when I needed a modem to connect to get more work on my 1989 IICX :-)

Help! Multiple Displays not Working. (Mac Pro late 2013).

Similar Messages

Maybe you are looking for