Help! MuVo won't turn on after firmware upgra

I upgraded my MuVo TX FM with the MuVoTXFM_PCFW_LF__9_0.exe file, upgrade seemed to go well but now the MuVo simply doesn't turn on!? Works fine when connected to USB, computer see's it and I can copy to it...
I have these drivers installed, MStorage_PCDRV_LB__07_00_250.exe
Please help me!

Whoever put the drivers onto the site got them from their N200 disk. They are the drivers that were available from the website until the newer ones came out quite recently.
It says Win 98 because you only normally need the drivers for a Win 98 or Win 98SE PC - Win XP recognises the player without them.
Any OS needs the drivers installed to be able to get into Recovery Mode as the driver installation also installs the Player Recovery Device driver.
So, in answer to your question, I am sure they are the right drivers.
HTH
PB

Similar Messages

  • Hello... can anyone help, my late 2010 MBA's - OS X Lion 10.7.5 wifi won't turn on after a deep sleep

    can anyone help, my late 2010 MBA's - OS X Lion 10.7.5 wifi won't turn on after a deep sleep.. thanks..!

    Hi John,
    Thanks for the additional information.  What I would try next is resetting System Management Controller:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    You can find the full article here:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    If this still doesn't help, it would be time to take it in to be looked at.  You can setup an appointment at a Genius Bar by clicking on the following link:
    http://www.apple.com/retail/geniusbar/
    Best,
    Sheila M.

  • My BBZ10 won't turn on after battery died? Help?

    My BBZ10 won't turn on after battery died? Help?

        reebok6453, let's bring life back to that device! Connect that device to your charger for at least 30 minutes and then press/hold the power button down. Keep us posted.
    LasinaH_VZW
    Follow us on Twitter @VZWSupport

  • MacBook Pro 15" won't turn on after a shut down.

    My MacBook Pro 15" late 2008 mavericks won't turn on after a shut down. Tried SMC reset, plugged and unplugged charger multiple times as well as installing the battery. It has started that after a while I have replaced my old battery with a new one,upgraded to Mavericks and increased my memory to 4GB. In the beginning after I would install every time the battery ,it' would turn on after 8-10 tries. Today it's completely unresponsive . Tested different outlets, with and without battery,nothing worked. I also heard that some other people have this issue once they have updated their operating system from  10.5.8 to Mavericks. Is that the problem.? Has anyone found a solution to this?

    Hi there Olgabinou,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/ts1367
    -Griff W. 

  • My N73 ME won't turn ON after I install PC Suite.

    My Nokia N73 Music Edition won't turn ON after I update the version of my PC Suite from V 3.0638.0.0.30 to V 4.0727.2.2.1
    can somebody help me with this I can no longer use my N73 ME now
    and I don't what to do to resolve this problem and I need your help.
    Personal Information RemovedMessage Edited by adisaily on 10-Sep-2007 06:30 AM

    Hey! Don't mind.
    First Off, you upgraded your phone, not PC Suit.
    You most probably did it by using PC Suit (PC suit uses Nokia Software Updater) to upgrade it.
    I suspect there was some fall out while downloadin or installin the updates.
    Earlier I would advise people to go to nearest Nokia Care centre.
    Now, the 3 fingers action might cure it well,though I'm not sure.
    The method:
    --The number 3---the * star----The green call key--- .
    If the phone still cant turn on.
    Then, if you have any warrenty and have a nokia care centre near you, make a trip to there.
    They will cure it.

  • Mac 10.6 won't turn off after update

    Macbook air a1304 won't turn off after updating unless you push on/off button.

    Phone your nearest HP Support  to request warranty service. Worldwide contact info can be accessed here>Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • My Ipad air won't turn on after the new IOS7 update

    my Ipad Air won't turn on after updating to the new IOS 7.1.1. It ask me for my password I put it in, the apple logo appear and then it want off now it won't come back on. need help please

    Did you try this?
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • 7th gen iPod nano won't turn on after disconnect.

    7th gen iPod nano won't turn on after disconnect. I loaded some new music, synced and ejected correctly. screen went black on unplug. Waited, did the button trick, didn't work. plugged it back in & it is recognized immediately. restored, resynced & ejected again. same thing-black screen w/ no response. Charged it overnight. ejected, screen then went to language setting. OK for English, eject & back to black on unplug. Switched ports for cable, tried eject thru PC...all resulting in dead nano after unplug. I really don't want to charge into the store & take it out on the poor kid who will catch the brunt of my frustration. anyone have a suggestion?

    Hello Marie,
    I would be concerned too if my iPod nano was not powering on.  I found an article for the 6th generation iPod nano that has steps you can take for an issue like this (the only difference for the 7th generation iPod nano is the steps you will take for the reset. I included the steps to reset a 7th generation iPod nano below):
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    You can find the full article here:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    All the steps apply to the 7th generation except the steps for the reset.  To reset a 7th generation iPod nano, use these steps:
    Press and hold the Sleep/Wake button and the Home button for six seconds, or until the screen goes dark. The Apple logo appears after a few seconds, and then the Home screen. You may need to repeat this step.
    I got these steps from this tutorial, which may also help with your iPod not appearing in iTunes:
    iPod nano not appearing in iTunes
    http://www.apple.com/support/ipodnano/assistant/itunes/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Iphone 5s won't turn on after the update

    iphone 5s won't turn on after downloaded recent update

    Hey lillyluv2010!
    Here is an article for you that will help you troubleshoot this issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Turn on! My mac won't turn on after sleeping!

    Ever had a problem where your computer won't turn on after sleeping for a few minutes? (I've discovered that too many downloads cause this) Anyway... have you ever tried pushing the power button for one second? Try it! It's been working for me! Hope this helped!
    (If it still won't turn on, try typing in letters randomly for one minute. Just type anything like: asdjhas)

    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
      About NVRAM and PRAM

  • Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go.

    Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?

    I have an iP4500, which I assume is quite similar to your model.
    I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
    Plug the printer into the USB port on the Express and restart the printer.
    Open System Preferences (gear icon on the dock) and then open Print and Fax
    Right-Click in the printer area on the left and select Reset Printing System
    Then click the + (plus) button at the bottom of the printer list to install the printer again.

  • What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • 3G still won't turn off after hitting home and sleep button at same time. Any other ways to try?

    3G still won't turn off after hitting home and sleep button at same time. Any other ways to try it?

    And when you held them neither the red Off slider nor the Apple logo appeared?
    If not then your sleep button is broken, you will need to get it serviced.

  • IPhone won't turn on after brief blue screen.

    My iPhone is currently broken, won't turn on after a blue screen appeared briefly. Won't even connect to my PC or iTunes. Won't even charge with my charger or using a new charger from a family member. Won't hard reboot by holding home top button. Anyone know what my situation is? Checked over the internet and couldn't find any similiar situations. Also this occured after i was browsing Reddit so nothing intense was occuring on my phone at the time.

    I'm afraid you'll have to get it looked at by visiting an Apple Store or Authorized Service Provider next to your place or by contacting Apple:
    Apple - Support - Service Answer Center

  • IPad Air won't turn on after opening the smart case

    iPad Air won't turn on after opening the smart case cover, it does not do it all the time but enough to concern me

    Take both the iPad and the Smart Cover back to where you bought them for an evaluation. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Maybe you are looking for