Help~! muvo2fm boot prob

i bought it at the end of 2004,yesterday when i boot it,the LCD show the message "reminder.wav" and then i cannot do any operation.i cannot play musics.what does this mean?whats wrong what my mp3?Message Edited by bxuan on -4-200605:35 PM

What I'd do is start over with Snow Leopard which will cost you $29 and also get you ready for Lion when it's released. I would also restore from the Time Machine BU using Setup Assistant. I will point you to an article you need to read a bit later. The steps I'd recommend are:
1. Put the SL upgrade DVD in the SuperDrive and boot from it holding down the Option key.
2. Choose your language.
3. Click the Utilities menu and click Disk Utility
4. Select the internal HD and select the Erase tab
5. Set Format to Mac OS Extended (Journaled) and click Erase. Once done exit Disk Utility and continue with the OS X Install.
6. Use Setup Assistant to restore from you TM backup.
Please carefully read Setup Assistant tips this will show you how to successfuly migrate from your TM backup.

Similar Messages

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

I need help in booting the microsoft operating system

i need help in booting the microsoft operating system from startup.

Which version of OS X are you running? All you need to do is to purchase a retail copy of whichever flavor of Windows you like (I prefer Windows 7 Professional to Win 8.1) and use Boot Camp to install same. Then you'll be able to boot into either Mac OS or Windows by holding down the option key.
Boot Camp -> http://support.apple.com/kb/ht1461.
Good luck,
Clinton

I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 cont...

I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 ULTIMATE then after the exctraction of files and everything the windows setup came and my mouse and keyboard stopped working and i dont know how to open mac os x there is no option anywhere?? what shall i do pls help!!!!if there are any keyboard shortcut key to open mac os x or boot camp pls mention.

For Boot Camp issues please repost in the Boot Camp forum located by clicking Boot Camp

HT4539 When i try to update/download any app i get a message saying your account is not valid on the indian store go to usa store, can anyone help fix this prob of switching stores. Thnx

When i try to update/download any app i get a message saying your account is not valid on the indian store go to usa store, can anyone help fix this prob of switching stores. Thnx

Change to UK App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done".

Could use help dual booting windows 8 and ubuntu 13.04

I have a Lenovo G580 with windows 8 + Ubuntu 13.04 installed. I've been trying to get Dual-boot to work for the past few hours with no success. I've been following this guide. After setting up the partitions similar to the ones in the guide i downloaded easyBCD on windows 8. I then added Ubuntu 13.04 to the grub menu. When i restart my laptop i get the menu with lenovo recovery, windows 8, and Ubuntu(not Ubuntu 13.04 like i labeled) when clicking Ubuntu it says windows failed to load, insert media for recovery. I can't do anything to access Ubuntu at this point. I don't know what it is i'm doing wrong but could use some help. Below are some pictures of the process. I'll post any needed info that i may have forgotten. When choosing OS it's in uefi mode.
partitions
OS's

I have a Lenovo G580 with windows 8 + Ubuntu 13.04 installed. I've been trying to get Dual-boot to work for the past few hours with no success. I've been following this guide. After setting up the partitions similar to the ones in the guide i downloaded easyBCD on windows 8. I then added Ubuntu 13.04 to the grub menu. When i restart my laptop i get the menu with lenovo recovery, windows 8, and Ubuntu(not Ubuntu 13.04 like i labeled) when clicking Ubuntu it says windows failed to load, insert media for recovery. I can't do anything to access Ubuntu at this point. I don't know what it is i'm doing wrong but could use some help. Below are some pictures of the process. I'll post any needed info that i may have forgotten. When choosing OS it's in uefi mode.
partitions
OS's

A Potential Convert Looking for Some Help with Boot Camp

I posted this in the Macbook Pro forums, and somebody directed me here. Hopefully you can help me with my questions.
Hello,
I have been a PC user ever since I can remember. I have loved the operating system and have had a Dell Laptop for 4 years now without any problems at all. I have no qualms with the Windows Operating Systems. But, it is time for me to get a new laptop, as I will soon be heading off to college. I was thinking about getting another PC, as they are significantly cheaper than the lower-end MBP that I would get, but I was also thinking about trying out a Mac. I plan on using this laptop for most of my undergraduate education though, so I don't want to buy something and find out it isn't what I want or I can't use it. So, if you would help me, I would like to ask some questions about the lower-end Macbook Pro, and I may just end up getting one.
First things first, I am going to be going into engineering, likely mechanical or systems, at either WPI, Northeastern, or Tufts. Ah the experience of choosing colleged. I know Tufts uses AutoCAD, WPI uses SolidWorks, but I am not sure which Northeastern uses. Either way, I most certainly will be using a CAD program. I know that most CAD programs do not work on Macs, so I will likely be using Boot Camp. I have though seen on these boards that the AutoCAD licensing does not work with Boot Camp, or that some users have faced major problems with it. If this is so, then it is highly likely that I will be unable to get a Mac as that program is going to be an absolute necessity. Even if this is just a small percentage of the population, I do not want to find mine being of major issue. For those of you who have gotten it to work, how difficult was the installation, and have you had any issues with AutoCAD or the like? With this in mind, would you even suggest that I get a MBP?
Another Boot Camp question. I have read many posts on these boards discussing different partitioning options, yet I still am unsure what they all mean. I expect to use the Windows side for more than just AutoCAD. I likely will install some games on it for when I am bored, and Microsoft Office, as I do not wish to spend the extra money buying Office for Mac and I need to have the versatility of Excel that I have heard is not found in the Mac version. What is the difference between these two partitioning types, which would you recommend, and how much storage should I partition if I get a 200GB hard drive?
Yet another Boot Camp question, sorry for so many of these. My friend who has a Mac lauds it for its security, nobody makes viruses for Macs. As I will most definitively be using Windows in Boot Camp, would this compromise this security? I know it will be Windows, but I still imagine that it would be encoded somewhat differently then normal, but I could be wrong. Also, if it is possible for the Windows portion to get a virus, could that affect the Mac portion?
Also, I don't use an iPod. I suppose I always thought they were overpriced for what they do. Instead I use an Iriver Clix 2, and I love it. The only thing is, I use Windows Media Player to sync it with my library. I know many have qualms with WMP, but I personally favor it more than iTunes, but that is just me. I do not believe that you can download it for a Mac. If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
Finally, is the battery life any different when using Windows than when using Leopard? I will likely be using the Windows portion in the class room.
Sorry for the long-winded post, but I am certainly hoping that I can get some solid answers to make an educated decision before getting my next laptop. I would like to thank you very much for any help that you are able to give me. I do hope you can help me quickly. Thank you.
Message was edited by: Pyrojoe

I can't answer all your questions, especially not anything having to do with CAD.
I still imagine that [Windows] would be encoded somewhat differently then normal,
No. Windows is Windows. You will need a good Windows antivirus, firewall and antispyware program. It is unlikely that a Windows virus will infect the Mac partition because, ordinarily, Windows doesn't know how to do anything with the HFS+ formatted Mac partition. However, the existence of products like MacDrive means that it is possible to teach Windows how to write to the Mac partition, so I see no reason why a virus could not be programmed to.
If I were to download it for the Windows portion, I am assuming that I would have to switch to Windows in order to listen to my music then, correct? I can also add music to it via Windows Explorer. Can I do so through the "Finder"?
Yes. Probably/yes.
Finally, is the battery life any different when using Windows than when using Leopard?
Yes. Windows does not have the battery management that Leopard has. The battery runs down much quicker in Windows.
You didn't ask, but depending on what kind of engineering you want to study, you may be interested in, or even need to, use some flavour of Unix/Linux. On the one hand, you could always create a partition on a PC--or wipe Windows--and install Linux on the PC. That could even be a good learning experience. On the other hand, Mac OS is Unix, but preinstalled. So with a Mac, you would already have a platform for writing shell scripts, you would have Perl and Python built-in, you would have an IDE (XCode Tools) for C/C++/Objective C/Java as well as gcc and make tools already on the disks which come with the computer, and so on.
Message was edited by: Mr.Lobotomy

Help: Cannot boot from leopard disc anymore, everything else fine

I was working on an ibook and messing with it in firewire mode and was going to install leopard on it that way from my macpro. (just letting you know the context)
I tried to restart my machine(mac pro) and boot leopard both by pushing C and by running the installer.
I get the "You need to hold the power button panic message" everytime I do this. I unplugged external devices and tried this also and it has the same problem.
I cannot boot from the dvd anymore. If I eject the disc, osx loads normally.
Any ideas what I can do? (I have tried safe boot, pram clearing and hold option on boot to check options)
Here is the kernel panic when it finally loads into osx.
here is the kernel panic log when it reboots into OSX
Sat May 17 14:13:09 2008
panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x894ec373, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000018, CR3: 0x00df8000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000000, ECX: 0x00000000, EDX: 0x0a5a1004
CR2: 0x00000018, EBP: 0x817c3bc8, ESI: 0x0a4c5c00, EDI: 0x0a4c5c00
EFL: 0x00010246, EIP: 0x894ec373, CS: 0x00000008, DS: 0x0a3c0010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x817c39d8 : 0x12b0e1 (0x4555b4 0x817c3a0c 0x133238 0x0)
0x817c3a28 : 0x1a7bed (0x45e568 0x894ec373 0xe 0x45dd24)
0x817c3b08 : 0x19e517 (0x817c3b20 0xa83c980 0x817c3bc8 0x894ec373)
0x817c3b18 : 0x894ec373 (0xe 0x48 0x10 0x10)
0x817c3bc8 : 0x894db540 (0x0 0xa83c980 0xa4c5c00 0x1)
0x817c3c08 : 0x78d45139 (0xa4c5c00 0x1 0x0 0x13)
0x817c3c68 : 0x78d3e940 (0xa4c5c00 0x2407 0x817c3d2c 0xa4c5c00)
0x817c3c98 : 0x40c515 (0xa4c5c00 0xacd8130 0xacd8130 0x0)
0x817c3ce8 : 0x437535 (0xa4c5c00 0xacd8130 0xacd8130 0x0)
0x817c3d48 : 0x18c8aa (0xa4c5c00 0xacd8130 0x0 0x0)
0x817c3db8 : 0x12d165 (0xa525c78 0xaa76b90 0x817c3df8 0x11ee04)
0x817c3df8 : 0x126247 (0xa525c00 0xa2f9254 0xaad84b0 0x0)
0x817c3f08 : 0x196afc (0x817c3f44 0x0 0x0 0x0)
0x817c3fc8 : 0x19eb34 (0xab382a0 0x0 0x1a10b5 0xa63f208)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff378
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0x894d8000->0x89704fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0x78cc5000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x78ac0000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0x78d36000
com.apple.iokit.IOGraphicsFamily(1.5)@0x78d36000->0x78d51fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x78ac0000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacPro1,1 (Mac-F4208DC8)

I really appreciate everyone's help.
I am certainly not above taking the machine in but I will say this.....
I have been building and working on PC's for 15-20 years. I have never once used or had the need for a repair shop. It is my hobby. I recently switched to osx to give the mac a try and I love it.
I will say that vista/xp has four times as many problems but at least i can fix whatever comes my way hardware or software.
Any more ideas how to settle this without making my first trip to the repair shop ever?...
Chad

Help undoing Boot Camp Windows 7 install -- "no bootable device"?

I think there's some residual stuff from a Boot Camp install I need help getting rid of. Let me explain what happened so you'll understand what's wrong:
Ok so I set up Boot Camp utility to partition a 32 GB partition for Windows. I have a 250 GB hard drive, but when there were 32 GB in the Windows partition Boot Camp utility said that it would allocate 200 to Mac. I didn't really think of it, but what happened to the other 18 GB? Anyway, I tried installing Windows 7 (64 bit). After it installed, I was having trouble installing the boot camp drivers, so I decided to scrap Windows 7.
I shut down Windows and turned on the Mac, but it booted into 7. Weird. So I restarted again, this time holding the Option key, to get into Mac. I went into the Boot Camp utility and chose to restore the Mac partition and get rid of Windows. So right away it says it's done, okay. So now I check the Finder and it says I have 70 GB used, but I remember before it was 60 GB, so I wonder where that space went. And then I check iStat Pro and it says like I have 60 GB used and that the entire hard drive (including free space) is only 230 GB. Weird discrepancy, because Disk Utility shows it as 250 GB again...
So I restart the computer, thinking maybe it just needs to get its bearings. But it comes up with a black screen that says "No bootable device -- insert boot disk and press any key," and I'm thinking WHAT? So I power it off, boot by holding Option, and it only shows Macintosh HD.
So that's my situation, Windows still seems to be on there somewhere, but Mac doesn't know it, and I don't know what to do. Right now I'm erasing free space (don't know if that will help), but if there's a solution to this PLEASE LET ME KNOW.
I made a Time Machine backup before starting this whole process (thank God) so if I'm supposed to restore that in a particular way to get my hard drive back to normal or expect some things to not be restored or something please inform me.

I "skipped" the erase free space after reading your message, but it was already partly done. When I tried turning off the Mac after doing that, it seemed to freeze before completely shutting off so I forced shut down...
(I also opened the startup disk in System Preferences and clicked on Macintosh HD, I don't know if that made any difference.)
I zapped PRAM and now it booted like normal into OS X
So I looked into it, and actually the 70 GB seems to be in order (compared to the file sizes before backup, except for maybe a 400 MB Google Earth cache that seems to appear in my user library but not in the backup...) I guess iStat Pro and Disk Inventory X must just be reading in base-2, could that be it?
Do you still recommend booting from the SL DVD to repair the drive? Does everything sound like it's perfectly back to normal, so I can feel safe about making more backups and restoring to it should something horrible happen without finding out that there's something weird and messed up with the booting or something?

Need help installing boot camp onto macbook pro

I'm attempting to get Boot Camp to run on my MacBook Pro as I need to run several programs on windows for school. I purchased a Windows 8.1 download from Microsoft's website. The download from their website is not an ISO image and is not recognized by the Boot Camp Assistant on the "Create Bootable USB Drive for Windows Installation" screen. I am not a tech savvy person and I would appreciate any help/advice, it seems that I have to somehow convert the download?
Thank you!

You get an ISO using this method - http://www.cnet.com/how-to/how-to-download-the-official-microsoft-windows-8-1-is o/
You will need the ISO to be able to build the USB that Bootcamp needs.

Help with Boot Camp

I'm trying to install Windows Vista on my Mac. Do I need the Leopard disc in order to complete the installation because I don't have it.

Hi,
Sorry, I don't know much about Boot Camp, but you might get more help posting this in the Boot Camp forum as well:
http://discussions.apple.com/category.jspa?categoryID=237
Good luck!

Need help with boot

Hello all!
After some weeks I didn't turn on my pc, now it doesn't boot. Udev doesn't start while booting. Just writes what can't mount /dev/sda3 partition whitch is my / partition and I need to type my root password or press Ctrl+D to restart. I use grub2, whe menu.lst file is almost original and I have no idea what's wrong. Help me please.
P.S. when I type my password system takes me to console and I am allowed to use console programs like ranger. In ranger I can see my / partition, but where is no my home partition in /home directory, which is /dev/sda4.
LiveCD works ok and I am allowed to use all my data and partitions.

MoonSwan wrote:If you have a kernel log or faillog or dmesg.log or syslog ... assuming they have errors that they are spitting out for us to look at.
dmesg.log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 27 21:26:22 CEST 2011
[ 0.000000] Command line: root=/dev/disk/by-uuid/de5aed76-4351-4c19-a82f-699a9f2661f9 ro nomodeset
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP43-S3L/EP43-S3L, BIOS F8 09/22/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 130000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f5690] f5690
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfee0000 @ cfeda000-cfee0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ 12fffa000-130000000
[ 0.000000] RAMDISK: 37e40000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f7080 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfee3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfee3180 04B8A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000cfee0000 00040
[ 0.000000] ACPI: HPET 00000000cfee7e80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfee7f00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000cfee7d80 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000cfee85a0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfee0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048175
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee3000
[ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000
[ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83136 r8192 d23360 u524288
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031146
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/de5aed76-4351-4c19-a82f-699a9f2661f9 ro nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4055384k/4980736k available (4019k kernel code, 788036k absent, 137316k reserved, 3335k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3166.654 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6335.19 BogoMIPS (lpj=10555513)
[ 0.003395] pid_max: default: 32768 minimum: 301
[ 0.003510] Security Framework initialized
[ 0.003542] AppArmor: AppArmor disabled by boot time parameter
[ 0.006914] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008537] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009309] Mount-cache hash table entries: 256
[ 0.009640] Initializing cgroup subsys ns
[ 0.009670] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.009705] Initializing cgroup subsys cpuacct
[ 0.009756] Initializing cgroup subsys memory
[ 0.009796] Initializing cgroup subsys devices
[ 0.009825] Initializing cgroup subsys freezer
[ 0.009854] Initializing cgroup subsys net_cls
[ 0.009882] Initializing cgroup subsys blkio
[ 0.009950] CPU: Physical Processor ID: 0
[ 0.009978] CPU: Processor Core ID: 0
[ 0.010007] mce: CPU supports 6 MCE banks
[ 0.010041] CPU0: Thermal monitoring enabled (TM2)
[ 0.010071] using mwait in idle threads.
[ 0.010933] ACPI: Core revision 20110316
[ 0.013361] ftrace: allocating 15965 entries in 63 pages
[ 0.016697] Setting APIC routing to flat
[ 0.017018] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052003] CPU0: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz stepping 0a
[ 0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.053330] ... version: 2
[ 0.053330] ... bit width: 40
[ 0.053330] ... generic registers: 2
[ 0.053330] ... value mask: 000000ffffffffff
[ 0.053330] ... max period: 000000007fffffff
[ 0.053330] ... fixed-purpose events: 3
[ 0.053330] ... event mask: 0000000700000003
[ 0.070071] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.096674] Booting Node 0, Processors #1
[ 0.096727] smpboot cpu 1: start_ip = 9a000
[ 0.193346] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.203325] Brought up 2 CPUs
[ 0.203357] Total of 2 processors activated (12706.79 BogoMIPS).
[ 0.204779] devtmpfs: initialized
[ 0.204779] PM: Registering ACPI NVS region at cfee0000 (12288 bytes)
[ 0.204779] print_constraints: dummy:
[ 0.204779] NET: Registered protocol family 16
[ 0.204779] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.204779] ACPI: bus type pci registered
[ 0.204779] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.204779] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.211260] PCI: Using configuration type 1 for base access
[ 0.213358] bio: create slab <bio-0> at 0
[ 0.213894] ACPI: EC: Look up EC in DSDT
[ 0.218082] ACPI: SSDT 00000000cfee7f80 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.218283] ACPI: Dynamic OEM Table Load:
[ 0.218356] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.218513] ACPI: SSDT 00000000cfee8440 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.218704] ACPI: Dynamic OEM Table Load:
[ 0.218776] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.218946] ACPI: Interpreter enabled
[ 0.218976] ACPI: (supports S0 S3 S4 S5)
[ 0.219103] ACPI: Using IOAPIC for interrupt routing
[ 0.221962] ACPI: No dock devices found.
[ 0.221991] HEST: Table not found.
[ 0.222020] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.222086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.222185] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.222216] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.222246] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.222279] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.222847] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
[ 0.222888] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.222915] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.222936] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.222938] pci 0000:00:01.0: PME# disabled
[ 0.222966] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.223000] pci 0000:00:1a.0: reg 20: [io 0xe100-0xe11f]
[ 0.223034] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.223067] pci 0000:00:1a.1: reg 20: [io 0xe200-0xe21f]
[ 0.223101] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.223134] pci 0000:00:1a.2: reg 20: [io 0xe000-0xe01f]
[ 0.223172] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.223185] pci 0000:00:1a.7: reg 10: [mem 0xe8104000-0xe81043ff]
[ 0.223249] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.223261] pci 0000:00:1b.0: reg 10: [mem 0xe8100000-0xe8103fff 64bit]
[ 0.223303] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.223305] pci 0000:00:1b.0: PME# disabled
[ 0.223319] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.223354] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.223357] pci 0000:00:1c.0: PME# disabled
[ 0.223376] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 0.223418] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.223421] pci 0000:00:1c.4: PME# disabled
[ 0.223436] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.223478] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.223480] pci 0000:00:1c.5: PME# disabled
[ 0.223498] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.223531] pci 0000:00:1d.0: reg 20: [io 0xe300-0xe31f]
[ 0.223565] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.223599] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f]
[ 0.223633] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.223666] pci 0000:00:1d.2: reg 20: [io 0xe500-0xe51f]
[ 0.223704] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.223717] pci 0000:00:1d.7: reg 10: [mem 0xe8105000-0xe81053ff]
[ 0.223779] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.223822] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
[ 0.223909] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.223921] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.223927] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.223933] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.223939] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.223945] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f]
[ 0.223951] pci 0000:00:1f.2: reg 24: [io 0xf100-0xf10f]
[ 0.223978] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.223990] pci 0000:00:1f.3: reg 10: [mem 0xe8106000-0xe81060ff 64bit]
[ 0.224006] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.224030] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.224041] pci 0000:00:1f.5: reg 10: [io 0xe700-0xe707]
[ 0.224047] pci 0000:00:1f.5: reg 14: [io 0xe800-0xe803]
[ 0.224053] pci 0000:00:1f.5: reg 18: [io 0xe900-0xe907]
[ 0.224059] pci 0000:00:1f.5: reg 1c: [io 0xea00-0xea03]
[ 0.224065] pci 0000:00:1f.5: reg 20: [io 0xeb00-0xeb0f]
[ 0.224071] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f]
[ 0.224118] pci 0000:01:00.0: [1002:9440] type 0 class 0x000300
[ 0.224129] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.224137] pci 0000:01:00.0: reg 18: [mem 0xe5000000-0xe500ffff 64bit]
[ 0.224143] pci 0000:01:00.0: reg 20: [io 0xb000-0xb0ff]
[ 0.224153] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.224167] pci 0000:01:00.0: supports D1 D2
[ 0.224181] pci 0000:01:00.1: [1002:aa30] type 0 class 0x000403
[ 0.224191] pci 0000:01:00.1: reg 10: [mem 0xe5010000-0xe5013fff 64bit]
[ 0.224228] pci 0000:01:00.1: supports D1 D2
[ 0.224244] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.224274] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.224276] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff]
[ 0.224279] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.224309] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.224339] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.224342] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.224347] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.224391] pci 0000:03:00.0: [197b:2368] type 0 class 0x000101
[ 0.224417] pci 0000:03:00.0: reg 10: [io 0xc000-0xc007]
[ 0.224429] pci 0000:03:00.0: reg 14: [io 0xc100-0xc103]
[ 0.224441] pci 0000:03:00.0: reg 18: [io 0xc200-0xc207]
[ 0.224452] pci 0000:03:00.0: reg 1c: [io 0xc300-0xc303]
[ 0.224464] pci 0000:03:00.0: reg 20: [io 0xc400-0xc40f]
[ 0.224534] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.224565] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.224567] pci 0000:00:1c.4: bridge window [mem 0xe6000000-0xe6ffffff]
[ 0.224571] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.224616] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.224630] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.224654] pci 0000:04:00.0: reg 18: [mem 0xe8010000-0xe8010fff 64bit pref]
[ 0.224669] pci 0000:04:00.0: reg 20: [mem 0xe8000000-0xe800ffff 64bit pref]
[ 0.224679] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.224712] pci 0000:04:00.0: supports D1 D2
[ 0.224714] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.224718] pci 0000:04:00.0: PME# disabled
[ 0.224746] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.224777] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.224779] pci 0000:00:1c.5: bridge window [mem 0xe7000000-0xe7ffffff]
[ 0.224784] pci 0000:00:1c.5: bridge window [mem 0xe8000000-0xe80fffff 64bit pref]
[ 0.224832] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.224863] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.224866] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.224870] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.224872] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.224874] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.224875] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.224877] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.224879] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[ 0.224895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.224961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.224984] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.225008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.225027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.225077] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.225107] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.230967] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.231315] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.231663] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.232011] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.232358] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.232750] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.233097] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.233419] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.233809] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.233844] vgaarb: loaded
[ 0.233931] PCI: Using ACPI for IRQ routing
[ 0.233960] PCI: pci_cache_line_size set to 64 bytes
[ 0.234020] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.234022] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff
[ 0.234113] NetLabel: Initializing
[ 0.234141] NetLabel: domain hash size = 128
[ 0.234169] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.234208] NetLabel: unlabeled traffic allowed by default
[ 0.234246] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.234278] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.234418] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.243335] Switching to clocksource hpet
[ 0.243372] Switched to NOHz mode on CPU #0
[ 0.246609] Switched to NOHz mode on CPU #1
[ 0.247851] pnp: PnP ACPI init
[ 0.247887] ACPI: bus type pnp registered
[ 0.247960] pnp 00:00: [bus 00-3f]
[ 0.247962] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.247963] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.247965] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.247966] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.247968] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.247969] pnp 00:00: [mem 0xcff00000-0xfebfffff window]
[ 0.248003] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.248049] pnp 00:01: [io 0x0010-0x001f]
[ 0.248051] pnp 00:01: [io 0x0022-0x003f]
[ 0.248052] pnp 00:01: [io 0x0044-0x005f]
[ 0.248053] pnp 00:01: [io 0x0062-0x0063]
[ 0.248054] pnp 00:01: [io 0x0065-0x006f]
[ 0.248055] pnp 00:01: [io 0x0074-0x007f]
[ 0.248056] pnp 00:01: [io 0x0091-0x0093]
[ 0.248057] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.248059] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.248060] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.248061] pnp 00:01: [io 0x0290-0x029f]
[ 0.248062] pnp 00:01: [io 0x0800-0x087f]
[ 0.248063] pnp 00:01: [io 0x0290-0x0294]
[ 0.248064] pnp 00:01: [io 0x0880-0x088f]
[ 0.248065] pnp 00:01: [io 0x04c0-0x04ff]
[ 0.248113] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.248143] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.248173] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.248203] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.248232] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.248262] system 00:01: [io 0x04c0-0x04ff] could not be reserved
[ 0.248293] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248300] pnp 00:02: [dma 4]
[ 0.248302] pnp 00:02: [io 0x0000-0x000f]
[ 0.248303] pnp 00:02: [io 0x0080-0x0090]
[ 0.248304] pnp 00:02: [io 0x0094-0x009f]
[ 0.248305] pnp 00:02: [io 0x00c0-0x00df]
[ 0.248324] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.248356] pnp 00:03: [irq 0 disabled]
[ 0.248363] pnp 00:03: [irq 8]
[ 0.248364] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.248387] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.248403] pnp 00:04: [io 0x0070-0x0073]
[ 0.248424] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.248431] pnp 00:05: [io 0x0061]
[ 0.248452] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.248458] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.248462] pnp 00:06: [irq 13]
[ 0.248483] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.248557] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.248559] pnp 00:07: [io 0x03f7]
[ 0.248562] pnp 00:07: [irq 6]
[ 0.248563] pnp 00:07: [dma 2]
[ 0.248592] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.248697] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.248701] pnp 00:08: [irq 4]
[ 0.248742] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.248856] pnp 00:09: [io 0x0378-0x037f]
[ 0.248860] pnp 00:09: [irq 7]
[ 0.248893] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.248958] pnp 00:0a: [io 0x0060]
[ 0.248959] pnp 00:0a: [io 0x0064]
[ 0.248963] pnp 00:0a: [irq 12]
[ 0.248984] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.249017] pnp 00:0b: [io 0x0400-0x04bf]
[ 0.249052] system 00:0b: [io 0x0400-0x04bf] has been reserved
[ 0.249083] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.249196] pnp 00:0c: [mem 0xe0000000-0xe3ffffff]
[ 0.249236] system 00:0c: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.249267] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.249343] pnp 00:0d: [mem 0x000f0000-0x000f3fff]
[ 0.249344] pnp 00:0d: [mem 0x000f4000-0x000f7fff]
[ 0.249346] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[ 0.249347] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[ 0.249348] pnp 00:0d: [mem 0xcfee0000-0xcfefffff]
[ 0.249349] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.249351] pnp 00:0d: [mem 0x00100000-0xcfedffff]
[ 0.249352] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[ 0.249355] pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
[ 0.249356] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
[ 0.249357] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[ 0.249359] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
[ 0.249360] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[ 0.249361] pnp 00:0d: [mem 0x000e0000-0x000effff]
[ 0.249408] system 00:0d: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 0.249439] system 00:0d: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 0.249470] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.249500] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.249531] system 00:0d: [mem 0xcfee0000-0xcfefffff] could not be reserved
[ 0.249561] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.249592] system 00:0d: [mem 0x00100000-0xcfedffff] could not be reserved
[ 0.249622] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.249652] system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.249683] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.249713] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.249743] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.249773] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.249803] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[ 0.249833] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.249845] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
[ 0.249874] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.249878] pnp: PnP ACPI: found 15 devices
[ 0.249906] ACPI: ACPI bus type pnp unregistered
[ 0.255617] pci 0000:00:1c.4: BAR 15: assigned [mem 0xe8200000-0xe83fffff 64bit pref]
[ 0.255652] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe8400000-0xe85fffff]
[ 0.255684] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe8600000-0xe87fffff 64bit pref]
[ 0.255718] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.255748] pci 0000:01:00.0: BAR 6: assigned [mem 0xe4000000-0xe401ffff pref]
[ 0.255782] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.255811] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.255841] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff]
[ 0.255872] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.255907] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.255936] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.255968] pci 0000:00:1c.0: bridge window [mem 0xe8400000-0xe85fffff]
[ 0.255999] pci 0000:00:1c.0: bridge window [mem 0xe8600000-0xe87fffff 64bit pref]
[ 0.256035] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.256065] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.256097] pci 0000:00:1c.4: bridge window [mem 0xe6000000-0xe6ffffff]
[ 0.256128] pci 0000:00:1c.4: bridge window [mem 0xe8200000-0xe83fffff 64bit pref]
[ 0.256164] pci 0000:04:00.0: BAR 6: assigned [mem 0xe8020000-0xe802ffff pref]
[ 0.256197] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.256227] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.256259] pci 0000:00:1c.5: bridge window [mem 0xe7000000-0xe7ffffff]
[ 0.256290] pci 0000:00:1c.5: bridge window [mem 0xe8000000-0xe80fffff 64bit pref]
[ 0.256326] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.256355] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.256386] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.256416] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.256453] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.256484] pci 0000:00:01.0: setting latency timer to 64
[ 0.256488] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.256520] pci 0000:00:1c.0: setting latency timer to 64
[ 0.256524] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.256555] pci 0000:00:1c.4: setting latency timer to 64
[ 0.256560] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.256591] pci 0000:00:1c.5: setting latency timer to 64
[ 0.256596] pci 0000:00:1e.0: setting latency timer to 64
[ 0.256598] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.256600] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.256601] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.256603] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.256604] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.256606] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.256607] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe5ffffff]
[ 0.256609] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.256610] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.256612] pci_bus 0000:02: resource 1 [mem 0xe8400000-0xe85fffff]
[ 0.256613] pci_bus 0000:02: resource 2 [mem 0xe8600000-0xe87fffff 64bit pref]
[ 0.256615] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.256617] pci_bus 0000:03: resource 1 [mem 0xe6000000-0xe6ffffff]
[ 0.256618] pci_bus 0000:03: resource 2 [mem 0xe8200000-0xe83fffff 64bit pref]
[ 0.256620] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.256621] pci_bus 0000:04: resource 1 [mem 0xe7000000-0xe7ffffff]
[ 0.256623] pci_bus 0000:04: resource 2 [mem 0xe8000000-0xe80fffff 64bit pref]
[ 0.256624] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.256626] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.256627] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.256629] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.256630] pci_bus 0000:05: resource 8 [mem 0xcff00000-0xfebfffff]
[ 0.256691] NET: Registered protocol family 2
[ 0.256846] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.257622] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.260343] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.260736] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.260766] TCP reno registered
[ 0.260800] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.260856] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.261103] NET: Registered protocol family 1
[ 0.261271] pci 0000:01:00.0: Boot video device
[ 0.261279] PCI: CLS 32 bytes, default 64
[ 0.261320] Unpacking initramfs...
[ 0.280521] Freeing initrd memory: 1728k freed
[ 0.280747] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.280777] Placing 64MB software IO TLB between ffff8800cbeda000 - ffff8800cfeda000
[ 0.280811] software IO TLB at phys 0xcbeda000 - 0xcfeda000
[ 0.281112] audit: initializing netlink socket (disabled)
[ 0.281149] type=2000 audit(1309681092.279:1): initialized
[ 0.281549] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.283195] VFS: Disk quotas dquot_6.5.2
[ 0.283324] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.283483] msgmni has been set to 7924
[ 0.283664] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.283722] io scheduler noop registered
[ 0.283751] io scheduler deadline registered
[ 0.283811] io scheduler cfq registered (default)
[ 0.283920] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.283942] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.283973] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.283999] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.284043] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.284069] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.284110] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.284136] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.284239] intel_idle: MWAIT substates: 0x22220
[ 0.284240] intel_idle: does not run on family 6 model 23
[ 0.284245] ERST: Table is not found!
[ 0.284310] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.304821] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.520640] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.573586] Linux agpgart interface v0.103
[ 0.573677] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[ 0.573707] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.574077] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.574138] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.574260] mousedev: PS/2 mouse device common for all mice
[ 0.574354] rtc_cmos 00:04: RTC can wake from S4
[ 0.600105] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.600160] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.600205] cpuidle: using governor ladder
[ 0.600234] cpuidle: using governor menu
[ 0.600407] TCP cubic registered
[ 0.600436] NET: Registered protocol family 17
[ 0.600470] Registering the dns_resolver key type
[ 0.600564] PM: Hibernation image not present or could not be loaded.
[ 0.600567] registered taskstats version 1
[ 0.601031] rtc_cmos 00:04: setting system clock to 2011-07-03 08:18:13 UTC (1309681093)
[ 0.601083] Initializing network drop monitor service
[ 0.602022] Freeing unused kernel memory: 712k freed
[ 0.602239] Write protecting the kernel read-only data: 6144k
[ 0.602468] Freeing unused kernel memory: 60k freed
[ 0.604398] Freeing unused kernel memory: 784k freed
[ 0.611895] udevd[53]: starting version 171
[ 0.669709] SCSI subsystem initialized
[ 0.686607] libata version 3.00 loaded.
[ 0.687348] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.687411] pata_jmicron 0000:03:00.0: setting latency timer to 64
[ 0.687623] scsi0 : pata_jmicron
[ 0.687706] scsi1 : pata_jmicron
[ 0.688068] ata1: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
[ 0.688099] ata2: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
[ 0.698563] ata_piix 0000:00:1f.2: version 2.13
[ 0.698616] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.698649] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.698816] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.699016] scsi2 : ata_piix
[ 0.699082] scsi3 : ata_piix
[ 0.699361] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.699394] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.699443] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.699486] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.700200] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.700348] scsi4 : ata_piix
[ 0.700415] scsi5 : ata_piix
[ 0.700674] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
[ 0.700706] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
[ 0.847198] ata1.00: ATAPI: PIONEER DVD-RW DVR-112, 1.15, max UDMA/66
[ 0.847229] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 0.860530] ata1.00: configured for UDMA/33
[ 0.873346] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-112 1.15 PQ: 0 ANSI: 5
[ 1.030714] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.174170] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.180268] ata6.00: HPA detected: current 1250261615, native 1250263728
[ 1.180306] ata6.00: ATA-8: WDC WD6400AAKS-00E4A0, 05.01D05, max UDMA/133
[ 1.180340] ata6.00: 1250261615 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.186942] ata6.00: configured for UDMA/133
[ 1.283819] Refined TSC clocksource calibration: 3166.306 MHz.
[ 1.283855] Switching to clocksource tsc
[ 1.497568] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 1.497610] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.508469] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.508508] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.508544] ata3.01: link offline, clearing class 3 to NONE
[ 1.513515] ata4.01: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
[ 1.513553] ata4.01: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.524091] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 6.507978] ata4.01: configured for UDMA/133
[ 7.400696] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.400740] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 7.400781] ata3.01: link offline, clearing class 3 to NONE
[ 12.400139] ata3.00: qc timeout (cmd 0xa1)
[ 12.400172] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 12.400209] ata3.00: limiting SATA link speed to 1.5 Gbps
[ 13.194235] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 13.194279] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 13.194319] ata3.01: link offline, clearing class 3 to NONE
[ 13.210692] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x2)
[ 19.993662] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 19.993706] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 19.993747] ata3.01: link offline, clearing class 3 to NONE
[ 19.993841] scsi 3:0:1:0: Direct-Access ATA WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
[ 19.994011] scsi 5:0:0:0: Direct-Access ATA WDC WD6400AAKS-0 05.0 PQ: 0 ANSI: 5
[ 20.002921] sd 3:0:1:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 20.002987] sd 3:0:1:0: [sda] Write Protect is off
[ 20.003017] sd 3:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 20.003031] sd 3:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.003301] sd 5:0:0:0: [sdb] 1250261615 512-byte logical blocks: (640 GB/596 GiB)
[ 20.003373] sd 5:0:0:0: [sdb] Write Protect is off
[ 20.003403] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 20.003418] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 20.015573] sdb: sdb1
[ 20.015681] sda: sda1 sda2 sda3 sda4
[ 20.015805] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 20.015955] sd 3:0:1:0: [sda] Attached SCSI disk
[ 20.025385] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 20.025426] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 20.025626] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 20.503523] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 21.720234] udevd[241]: starting version 171
[ 21.849284] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 21.849289] ACPI: Power Button [PWRB]
[ 21.849336] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 21.849338] ACPI: Power Button [PWRF]
[ 21.909230] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 21.909234] Disabling lock debugging due to kernel taint
[ 21.960993] [fglrx] Maximum main memory to use for locked dma buffers: 3801 MBytes.
[ 21.961188] [fglrx] vendor: 1002 device: 9440 count: 1
[ 21.961560] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
[ 21.961570] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.961574] pci 0000:01:00.0: setting latency timer to 64
[ 21.961775] [fglrx] Kernel PAT support is enabled
[ 21.961791] [fglrx] module loaded - fglrx 8.85.6 [Apr 19 2011] with 1 minors
[ 22.112266] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 22.112311] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 22.112329] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 22.200599] ACPI: acpi_idle registered with cpuidle
[ 22.200655] Marking TSC unstable due to TSC halts in idle
[ 22.203161] Switching to clocksource hpet
[ 22.216025] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 22.216082] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 22.216101] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 22.221167] iTCO_vendor_support: vendor-support=0
[ 22.241200] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 22.241269] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0460)
[ 22.241300] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 22.241314] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.279576] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 22.305609] Floppy drive(s): fd0 is 1.44M
[ 22.320314] FDC 0 is a post-1991 82077
[ 22.423422] usbcore: registered new interface driver usbfs
[ 22.423488] usbcore: registered new interface driver hub
[ 22.423628] usbcore: registered new device driver usb
[ 22.447059] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 22.447088] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 22.447114] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 22.447117] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 22.447134] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 22.461785] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 22.461798] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 22.461836] r8169 0000:04:00.0: setting latency timer to 64
[ 22.461895] r8169 0000:04:00.0: irq 46 for MSI/MSI-X
[ 22.462108] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc90000666000, 00:1f:d0:8c:36:ca, XID 1c4000c0 IRQ 46
[ 22.463918] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 22.463934] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe8104000
[ 22.465525] IT8718 SuperIO detected.
[ 22.465700] parport_pc 00:09: reported by Plug and Play ACPI
[ 22.465755] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 22.471538] ppdev: user-space parallel port driver
[ 22.476684] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 22.476836] hub 1-0:1.0: USB hub found
[ 22.476845] hub 1-0:1.0: 6 ports detected
[ 22.476907] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 22.476921] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 22.476923] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 22.476934] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 22.501210] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 22.501224] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8105000
[ 22.513363] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 22.513456] hub 2-0:1.0: USB hub found
[ 22.513459] hub 2-0:1.0: 6 ports detected
[ 22.604551] uhci_hcd: USB Universal Host Controller Interface driver
[ 22.604601] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.604608] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 22.604610] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 22.604620] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 22.609461] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 22.609490] sd 3:0:1:0: Attached scsi generic sg1 type 0
[ 22.609513] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 22.616717] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
[ 22.616861] hub 3-0:1.0: USB hub found
[ 22.616865] hub 3-0:1.0: 2 ports detected
[ 22.616919] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 22.616924] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 22.616926] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 22.616932] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 22.626727] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
[ 22.626863] hub 4-0:1.0: USB hub found
[ 22.626866] hub 4-0:1.0: 2 ports detected
[ 22.626916] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 22.626921] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 22.626923] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 22.626929] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 22.640057] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
[ 22.640206] hub 5-0:1.0: USB hub found
[ 22.640209] hub 5-0:1.0: 2 ports detected
[ 22.640287] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 22.640292] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 22.640294] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 22.640301] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 22.653412] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 22.653525] hub 6-0:1.0: USB hub found
[ 22.653528] hub 6-0:1.0: 2 ports detected
[ 22.653580] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 22.653585] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 22.653587] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 22.653592] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 22.663388] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 22.663483] hub 7-0:1.0: USB hub found
[ 22.663486] hub 7-0:1.0: 2 ports detected
[ 22.663537] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 22.663542] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 22.663545] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 22.663550] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 22.673377] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 22.673517] hub 8-0:1.0: USB hub found
[ 22.673520] hub 8-0:1.0: 2 ports detected
[ 22.890030] usb 2-6: new high speed USB device number 2 using ehci_hcd
[ 23.088194] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 23.320022] usb 3-2: new full speed USB device number 2 using uhci_hcd
[ 23.501917] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
[ 23.519193] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 23.856585] Linux media interface: v0.10
[ 23.893017] Linux video capture interface: v2.00
[ 23.913937] uvcvideo: Found UVC 1.00 device Sirius USB2.0 Camera (0ac8:3330)
[ 23.916866] input: Sirius USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input4
[ 23.916907] usbcore: registered new interface driver uvcvideo
[ 23.916909] USB Video Class driver (v1.0.0)
[ 23.936777] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input5
[ 23.936831] generic-usb 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-2/input0
[ 23.941854] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input6
[ 23.941970] generic-usb 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-2/input1
[ 23.941986] usbcore: registered new interface driver usbhid
[ 23.941987] usbhid: USB HID core driver
[ 24.403677] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 24.564686] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 24.592114] Adding 2104508k swap on /dev/sda2. Priority:-1 extents:1 across:2104508k

Help with Boot Camp Assisant install

I am trying to install windows 8 on my macbook pro I bought Saturday (2/28). I get past the first 3 steps but when it restarts my computer the first thing it does is boot to the usb drive called windows where it tells me there is no boot disk available press any key to continue, then there is the efi boot i believe which when clicked under boot menu at start it starts to install windows all the way till I have to choose a partition and it comes up with this error message Please help need windows to run certain programs for school!!

Last login: Wed Mar 4 00:05:23 on console
Brendans-MacBook-Pro:~ BHoss$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         397.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data                         102.0 GB   disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Brendans Hard Drive    *396.9 GB   disk1
                                 Logical Volume on disk0s2
                                 E9D52E86-C9F8-4199-99E7-55591DC1F44F
                                 Unencrypted
Brendans-MacBook-Pro:~ BHoss$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 6410A4FF-76DC-4C11-BEA2-10DB12DB8D47
    =========================================================
    Name:         Brendans Hard Drive
    Status:       Online
    Size:         397248102400 B (397.2 GB)
    Free Space:   18972672 B (19.0 MB)
    |
    +-< Physical Volume BC7D8947-0101-4EF3-9ED3-FA605FD32FE6
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     397248102400 B (397.2 GB)
    |
    +-> Logical Volume Family 7D0AF1EC-3255-43E6-B093-91FE28B64956
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume E9D52E86-C9F8-4199-99E7-55591DC1F44F
            Disk:                  disk1
            Status:                Online
            Size (Total):          396876808192 B (396.9 GB)
            Conversion Progress:   -none-
            Revertible:            Yes (no decryption required)
            LV Name:               Brendans Hard Drive
            Volume Name:           Brendans Hard Drive
            Content Hint:          Apple_HFS
Brendans-MacBook-Pro:~ BHoss$ sudo gpt -vv -r show /dev/disk0
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
Sorry, try again.
Password:
Sorry, try again.
Password:
Sorry, try again.
sudo: 3 incorrect password attempts
Brendans-MacBook-Pro:~ BHoss$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         397.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data                         102.0 GB   disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Brendans Hard Drive    *396.9 GB   disk1
                                 Logical Volume on disk0s2
                                 E9D52E86-C9F8-4199-99E7-55591DC1F44F
                                 Unencrypted
Brendans-MacBook-Pro:~ BHoss$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 6410A4FF-76DC-4C11-BEA2-10DB12DB8D47
    =========================================================
    Name:         Brendans Hard Drive
    Status:       Online
    Size:         397248102400 B (397.2 GB)
    Free Space:   18972672 B (19.0 MB)
    |
    +-< Physical Volume BC7D8947-0101-4EF3-9ED3-FA605FD32FE6
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     397248102400 B (397.2 GB)
    |
    +-> Logical Volume Family 7D0AF1EC-3255-43E6-B093-91FE28B64956
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume E9D52E86-C9F8-4199-99E7-55591DC1F44F
            Disk:                  disk1
            Status:                Online
            Size (Total):          396876808192 B (396.9 GB)
            Conversion Progress:   -none-
            Revertible:            Yes (no decryption required)
            LV Name:               Brendans Hard Drive
            Volume Name:           Brendans Hard Drive
            Content Hint:          Apple_HFS
Brendans-MacBook-Pro:~ BHoss$ sudo gpt -vv -r show /dev/disk0
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
After this point it doesn't allow me to enter password as I type nothing comes up

Need Help with Boot up getting circle with slash on Dual 1 GZ MMD G4

Hi everone, I'm having a problem with my old Dual 1GZ MMD G4 booting up from the HD consistently. I had to replace the power supple very recently and after that I'm having trouble. I've even installed a 250 HD and completely reinstalled the OX back to Jeopard and sometime after it sits it will boot up just fine..... but after restart even holding down OPTION and it see's the HD it will not boot up ( just getting circle with slash) I've verifyed the HD and a repair permissions and all checks out ok! I've have two different HD's that check out ok with disk utility and I still get the same results.... GETTING VERY FRUSTRATED:(
Any help or ideas would be greatly appreciated! THANKS!
Scott F.

Thanks for your reply! After reading another post I found out what the issue was and I was about to give up......
The Dual processor board was not seated and after reseating it back to the main board it been all good! Theres really know way to tell by looking at it, just gave it a push and noticed it was not right. CRAZY after all the time playing with HD's it was that..... Like the post I read it happen after replacing the Power Supple and I guess it just moved a tiny bit out of place..... I hope this helps others and again thanks for your HELP!!!!

Help with Boot Camp Assistant network problem while downloading windows support system!

I need to download Windows support software, but just keep encountering a problem which says "Can't download Windows Support Software because of a network problem." What should I do? I'm currently using Boot Camp Assistant v5.0.0, and OS X 10.8.2. Help! What can I do to solve this network problem? Please and thank you (:

I have the same problem. Anyone out there? Hello?

Help~! muvo2fm boot prob

Similar Messages

Maybe you are looking for