Help... my adjustment tool stopped working

I'm not sure what I did to break it.  One day it worked fine, and then I created some customized settings (for the adjustment tool,) and then it stopped functioning properly.
This is what I see:
When I click on the tool brush, then click on the image, nothing happens.
When I click on the dot to see where I have painted, instead of getting the bright red color over those areas, it shows just a faint opaque red.
It's the only thing that's not working right, and I'm in a heap of trouble because I have to use it to work.
Can anyone please help?

Jenna_Whidby had this to say:
I'm not sure what I did to break it.  One day it worked fine, and then I created some customized settings (for the adjustment tool,) and then it stopped functioning properly.
This is what I see:
When I click on the tool brush, then click on the image, nothing happens.
When I click on the dot to see where I have painted, instead of getting the bright red color over those areas, it shows just a faint opaque red.
It's the only thing that's not working right, and I'm in a heap of trouble because I have to use it to work.
Can anyone please help?
From other messages here, check your flow settings. Sometimes they
inadvertently get set to zero, and so you'd see no effects.

Similar Messages

  • Help!!!! clone stamp and healing brush tool stopped working suddenly

    Help!!!! clone stamp and healing brush tool stopped working suddenly

    What are the Tools’ Blend Mode, Opacity and Flow (see Options Bar)?
    Could you please post a screenshot with the pertinent Panels visible?
    Have you tried resetting the Tools?
    Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

  • Hand tool stops working in Flash CS5

    Does anyone know why my hand tool stops working after some time? Whenever I restart Flash, it works, but after like 30 minutes working, it just won't work. The hand tool symbol appears, with the shortcut key, the space bar, and the button on my pen as well, but it won't drag it at all.
    I have to restart it every time, and its getting annoying.
    I have a
    Intel Core i7-2600k @3.40GHz
    Windows 7 64-bit
    8 GB Ram
    1TB Space
    Everything works fine, is just that hand tool issue.
    Any help is appreciated.
    Thank you.
    P.S. First time I've posted, maybe wrong forum section.

    Hi ,
    Yes for the brush tool , we just have the fill color. Snapshot attached -
    Let me know what do you want to achieve using the brush tool so that I can suggest you some other tool to be used for the requirement.
    Thanks and regards,
    Sudeshna Sarkar
    Adobe Flash Professional Team.

  • -Why did my CS2 Dodge Tool stop working as set?

    CS2 dodge tool stopped working as set, yet Burn, Sponge, Clone Tools all work; dodge tool leaves centered white specks if clicked multiple times; all my CS1 tools work; all my CS2 & CS1 tool settings are same (0 hardness, 20% exposure), rebooting does not fix; can anyone help?  Is it possible to create this problem by accidentally typing Shift, Alt or Ctrl "," or "." or similar whilst using CS2 Dodge Tool?  Thanks in advance!

    It's probably something to do with the tool's brush. If picking a brush preset (not just a brush tip) doesn't fix it then reset the Dodge Tool. Right-click on the tool's icon at very left of Options bar and pick Reset Tool.

  • Speed adjustment has stopped working

    iMovie 10.0.4; OS 10.9.4.
    I am three quarters of the way through a 45-minute project, and the speed adjustment has stopped working. The hare icon is greyed out. I have used the adjustment successfully on two or three clips in the project, both for speed adjustment and clip reversal, and these adjustments are still effective, though the SpeedBar and hare symbol have vanished from their thumbnails.I have tried a number of things, but to no avail:
    Creating a new project based on a different event. Speed adjustment does not work for that either.
    Creating a project in iMovie on a different user account. That does work.
    Reverting temporarily to iMovie 10.0 .3. Didn't work.
    Repairing permissions and restarting. Didn't work.
    Any help would be much appreciated.

    I haven't really done any cleanup or anything for that matter simply because I can't figure anything out. When it comes to track down and remove the user.js file, I can't find it at all. I even followed all the instructions to get to the profile page that it would be one. I am not trying to get speed dial as a home page, I want it to be there when I open up a new tab. On the whole speed dial options, it is selected as a new tab however this flippin search page conduit.com is there. I have even set the speed dial to open up in a new window, and that did not work. I don't know what to do. I feel for whatever reason my Firefox is not installed properly. When I installed it, the so called firefox button at the top was never there. When an online instructions shows me pictures, I have something completely different and have to spend time figureing out where this whatever is. If resetting firefox will fix the issue, even if I have to re install Speed dial and reset it all, I am totally game for that. Nothing else has worked and I am getting very frustrated by it.

  • Spot Healing Brush Tool stops working in CS6 on Mac

    Hello:
    Just wondering if anyone else has experienced this.  While working in the Spot Healing Brush Tool in CS6 on my iMac (Mountain Lion) , the tool stops working. I use it a few times on a busy BG, and then it goes away. The brush turns to a cross, and the tool no longer works. Reseting the tool, or All Tools, does not fix the problem.
    Please let me know if there is a fix for this problem.
    Thanks,
    Richard

    BTW:
    This is also hapenning when I use the Patch tool.  It "Eventually" comes back, but I loose it again after a fix or two. Can't figure this one out. Need help.
    Richard

  • Suddenly in the middle of editing a large project the cropping and other tools stopped working. Did i hit some key or something accidently?

    suddenly in the middle of editing a large project in Aperture the cropping and others tools stopped working. Did I accidently hit something to do that?

    Maybe you hit the "p" key?
    Then "Quick Preview" will be turned on and prevent editing. Hit "p" again or use the "View" ->"Quick Preview" menu entry.

  • Hand tool stops working randomly (CS6)

    Hi,
    So I'm working on this composition with a lot of 3d layers. Sometimes when I switch views, the hand tool stops working completely, for no apparent reason. I hit space, the hand icon still shows, but nothing happens when I drag the cursor. Then after a while it starts working again, for no apparent reason either. It's driving me nuts.
    I've already tried resetting the preferences, to no avail.
    My specs :
    i5-3330 @ 3.00GHz
    6 gigs of RAM
    NVIDIA GeForce GT 620
    1 To HDD
    Windows 8

    Could be a cache issue or your graphics card not flushing its buffers. Turn off the performance cache in the prefs and update your graphics driver....
    Mylenium

  • Help my Ipod suddenly stopped working 2 min after unplug from car......

    Help my Ipod suddenly stopped working 2 min after unplugging it from my scion pioneer ipod ready radio. I am not sure what happened; it was working fine and charged sufficiently and i walked into the gym and tried to turn it on, and no life. I tried plugging it back into my car and it says "i-pod read error". I then tried to plug it into my computer and it doesnt even read it. I may have unplugged it when it said do not disconnect; i am not sure though.Any suggestions? thanks!
      Windows XP  

    I'd say your "Scion Pioneer" radio fried your Mini; could have been a power surge, or could be a bug.
    You might want to go the "aux jack" route next time.

  • My Snipping Tool stopped working

    My Snipping Tool stopped working.
    When I open the tool I get a box with a Circle/line and OK.

    Hi,
    Did you launch it via a shortcut?
    Try to open it via original application:
    1. Open C://Windows/System32 directory;
    2. Find SnippingTool.exe as the figure below:
    3. Double click to open it to check the result.
    If it works fine, remove the old shortcut and then recreate a new one.
    Karen Hu
    TechNet Community Support

  • Please help! "Photoshop has stopped working"

    Please help me - message: "Photoshop has stopped working" - know what to do ... I can not use the newly installed photoshop program.
    My problem is that as soon as (or about 5 seconds) after I opened Photoshop CC, I get an error message stating that "Photoshop has stopped working". I can not use my newly installed photoshop programs.
    I have just the "factory reset" my HP PC with Windows 7 operating system. I have updated everything to be updated in Windows and signed me for Adobe CC at Adobe.com. Now I have installed Photoshop CC, CC Illustrator, InDesign, Acrobat Pro X1, ExtendScript Toolkit CC and Extention Manager CC.
    I have uninstalled and reinstalled photoshop to see if the program works for it - but no, it does not. I have also tried holding down the three keys Shift - Ctrl - Alt, In connection with that I open the program (I googled the problem and someone tipped off that there could be a solution to the problem) but unfortunately also without success.
    The thing is that all the other Adobe CC program works fully on the computer (InDesign, Illustator and pdf tool Acrobat Pro X1). They work flawlessly.
    What to do?
    Best Regards
    SyssleOscar

    Provide exact system info and the crash logs.
    Working with your Operating System’s Tools | Mylenium's Error Code Database
    Mylenium

  • Mac CS6 Quick Selection tool stopped working

    The Quick Selection Tool (QST) was working fine.  Used the Lasso Toll and when I tried to use QST again it stopped working.   Any help??
    Chuck

    Could you please post a screenshot with the pertinent Panels visible so we can see the Tool’s settings in the Options Bar and the selected Layer/s?

  • Edit a copy with lightroom adjustment suddenly stopped working

    I have been using lightroom 3.4 and photoshop CS6 for sometime. However suddenly I cant move images from lightroom to photoshop (Ctrl+E) with the "Edit a copy with lightroom adjustment".
    When I click this option, it opens the Photoshop. But doesnt open the image. However the other two options "edit a copy" and "Edit original" works fine.
    Also when i add photoshop again as another external editor, it works fine. But as you all are aware this create another copy of the image.
    What I did
    I checked the applications path for photoshop and it was correct.
    I uninstalled lightroom and reinstalled.

    Hi Victoria,
    I dont have 3.6. but I installed lightroom 4 and the function worked fine. But i didnt like the version 4, as it consumes a lot of resources.
    I can open raw files without any problem.
    And this function had been working before and suddenly this stopped working. I didnt do any setttings changes even.
    Really appreciate your help on this.

  • Brush tool stops working after I use select tool

    So everything is fine until I use the select tool, and then free transform a part of the image. Then my brush and eraser stop working until I save and restart the program. Help please?

    In versions of PSE prior to PSE 11, quit the editor, then restart it while holding down ctrl+alt+shift/command+option+shift. Keep the keys down till you see a window asking if you want to delete the settings file. You do.
    For PSE 11, go to the editor preferences>general, click this button and restart the editor:

  • Help! CS3 has stopped working

    I get an error message from windows vista premiumm home.
    It just says: Adobe Photoshop CS3 has stopped working correctly. Windows will close the program and notify you if a solution is available. The only option is a box that says "close program". Once you close it everything goes away. It doesn't even give you a hint of what the problem could be. I installed creative suite 3 web premium on this brand new computer about 2 weeks ago. This is a first time install of this software, but when I called Adobe they said they don't offer free installation help anymore on cs3 because cs4 is out now. Anyone have a clue what I should do? I can't just uninstall photoshop, if I try it wants to uninstall all 8 programs.

    try resetting the preferences, per this FAQ:
    http://www.adobeforums.com/webx/.ef4a07f/1

Maybe you are looking for

  • My HP OfficeJet 6600 won't scan and email. It used to do it

    Explain how to get my HP OfficeJet 6600 to scan & email. I keep getting error messaage that the device is not attached. But it used to scan & email  fine prior. All of a sudden it stopped working.

  • Help with purchase order detail

    Hello Experts, I am currently trying to get information on a purchase order, but not having any luck.  I need to find the PO Number, and PO Approval Date.  I cannot find either of these.  I have tried using BBP_PD_PO_GETDETAIL, but have no luck with

  • Convert standard video files in to flv file at run time

    Hello All How can we convert standard video files in to flv file at run time like you tube and Google Video is there any script or tool to do this. This is urgent. I have one project in this project client requiring function like whatever standard vi

  • How can i activate my computer again after i deactivated?

    I was in iTunes store and klicked on deactivate all your accounts. Now i can not put music on my iphone. How can i activate my computer again?

  • Apple says my warranty expired but it hasn't been a year yet...

    I am mad at myself for losing the receipt but I know that I purchased my ipod less than a year ago. I bought it in Ohio in April or May of 2008 and I moved away from there in June 2008. Anyway, when I try the apple support online where you enter your