HELP!! My blackberry is froze on the 'backing up your data' screen

Tried running the new software update and all seemed to go fine at first, but now the 'overall backup progress' bar has been dead at 9% for a while and the 'social feeds' above has been stuck on 0% for the same amount of time. Ive tried rebooting but whenever i do this, the update starts up again and gets to the same point before stopping again. What do I do??? Is there anyway to force the software to stop?
Please help,
Thanks

(Credit JSanders)
There are two methods of recovery for you to try:
One:
Open Blackberry Desktop Software & Connect your device with PC using USB cable, without inserting battery.
You will get three option Retry, Update Or Cancel, then click on update.
Once it is to the stage of the update "initializing handheld", then insert battery.
If this does not work, and you remain stuck on the backing up the Social Feeds database, go to the second method below.
Secondly:
Start your BlackBerry in Safe mode.  Article ID: KB17877 How to start a BlackBerry smartphone in Safe Modehttp://www.blackberry.com/btsc/KB17877
Connect to the BlackBerry Desktop Software and allow your handheld to connect. If you are prompted to upgrade, cancel the upgrade for later.
IF you cannot connect or your Desktop Software does not recognize your device while in Safe Mode, please follow the directions here to force the detect:  Article ID: KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
Go to Device > delete > SELECT DATA > select to delete both the Social Feeds and Smart Card databases, and follow the remaining prompts to complete it. 
Now, you can return and click to upgrade the device through the Desktop Manager, or reboot the BlackBerry in normal mode and continue the over the air upgrade.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Can I send an e-mail to a specific person in Communities?  Want to thank them for their answer to a question that I didn't ask.  Just wanted to give him/her feedback that their info was very helpful.  Just a pat on the back to perhaps brighten their day.

    Can I send an e-mail to a specific person in Communities?  Want to thank them for their answer to a question that I didn't ask.  Just wanted to give him/her feedback that their info was very helpful.  Just a pat on the back to perhaps brighten their day.

    If you click on the person's name, you go to the public profile they have posted.  If there is an email address given you can email directly.  If not, you cannot email the person directly.
    You could post a reply to the persons reply on the communities to note their help.

  • I have received an error message from an attached USB hard drive (not Time Capsule) stating "Disk Name" cannot be repaired. Back up your data and reformat. I opened the Disk Utility in an attempt to repair the disk but am advised that the disk "could not

    I have received an error message relating to an attached USB hard drive (not a back up and not Time Capsule) advising that "disk name" cannot be repaired. Back up your data and reformat. When I attempted to verify the disk with Disk Utility, I was advised that the disk could not be unmounted. What can I do to repair the disk?
    Write Status is Read/Write
    SMART Status is Not Supported
    Partition Map Scheme is Master Boot Record
    HELP!
    timothy7712

    You need something stronger, such as DiskWarrior, TechTools Pro, or Data Rescue.

  • OS X could not be installed on your computer. The OS X upgrade couldnt be started because the disk Macintosh HD is damaged and cant be repaired. After your computer restart, back up your data, erase your disk, and try installing again.

    OS X could not be installed on your computer. The OS X upgrade couldnt be started because the disk Macintosh HD is damaged and cant be repaired. After your computer restart, back up your data, erase your disk, and try installing again.

    Beware!  When you initialize your boot disk be sure that you specify "Journaled" and not "Case-sensitive, Journaled". Previous OSX installers would check this and give an error message. Mavericks does NOT! If you install using "Case-sensitive" many apps will not work.

  • This disk doesn't contain an EFI system partition. If you want to start up your computer with this disk or include it in a RAID set, back up your data and partition this disk.

    As stated above. I get this when I try to resize my HD. Was having issues with BootCamp so I removed it and got this.
    This disk doesn’t contain an EFI system partition. If you want to start up your computer with this disk or include it in a RAID set, back up your data and partition this disk.

    the same problem...
    any help?

  • Quite often when I plug in my iPad 2, iTunes goes to the "Set Up Your iPad" screen and makes me restore it. Any way to stop this?

    I have had my iPad 2 since the start of June 2011. There are a lot of times when it works great, but I have had trouble sometimes when I sync. Prior problems were with SQLite3.dll, but got help copying that file to the right place. I have also completely uninstalled and re-installed iTunes. However, my biggest problem is that sometimes when I plug it in to sync with iTunes, it automatically goes to the "Set Up Your iPad" screen. It only allows me to set it up as a new iPad, or restore it from a backup. This is happening more and more. So much so that everytime I plug it in and it actually does work, before disconnecting I will right click on the iPad on the left hand bar and do a backup. This is really starting to get on my nerves. I'm not doing anything out of the ordinary with my iPad. Just playing some games and having a few other apps. It's so hard when playing some games like Angry Birds, getting 3 stars in all levels, only to plug the iPad in again to sync and have to restore it and lose all progress! Does anyone know why it goes to this screen? It doesn't happen all the time, but I'd say once every 4 times I connect. Also, I'm using Windows 7, and yes, all windows updates are done, and iTunes always is on the most up-to-date version. Thanks for any help!

    Normally, I would suggest restoring the iPad and uninstall and reinstall iTunes but you have done both of those things - more times than you ever imagined!
    Have you thought about turning auto syncing off?
    Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    If you do this you can backup the iPad right away before it syncs. You may want to go into all of the iTunes tabs and just make sure that all of the current content on the iPad is selected to sync before you actually do sync.
    This doesn't solve the problem, but it would prevent the automatic sync and erasing content. Hopefully, in the next few days- when iOS 5 is released - you will also be relieved of this weird iPad behavior - since the iOS devices are supposed to become PC free.
    BTW - and this is no excuse for what you are experiencing, but I have found that some of the game apps that I had on my iPad turned out to be quite troublesome and after I removed them, my problems went away. I know that is almost sacrilege with regard to the Angry Birds addiction .... But I'm just saying ...

  • Best way to  back up your data

    Which is the fastest and best way to back up your data in case of any problem ? Still to transfer to an external HD ?
    Thanks

    Hi Ferro;
    Best and simplest way to back up is Time Machine to an external drive.
    I think that any backup plan should alway be to an external drive. If you backup to an internal drive and the Mac fails, what good is your backup then?
    Allan

  • I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

    I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

    Normally, I would suggest restoring the iPad and uninstall and reinstall iTunes but you have done both of those things - more times than you ever imagined!
    Have you thought about turning auto syncing off?
    Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    If you do this you can backup the iPad right away before it syncs. You may want to go into all of the iTunes tabs and just make sure that all of the current content on the iPad is selected to sync before you actually do sync.
    This doesn't solve the problem, but it would prevent the automatic sync and erasing content. Hopefully, in the next few days- when iOS 5 is released - you will also be relieved of this weird iPad behavior - since the iOS devices are supposed to become PC free.
    BTW - and this is no excuse for what you are experiencing, but I have found that some of the game apps that I had on my iPad turned out to be quite troublesome and after I removed them, my problems went away. I know that is almost sacrilege with regard to the Angry Birds addiction .... But I'm just saying ...

  • When you upgrade to iOS6 on the iphone 4S how can you get your applications back on your home screen and not in your purchased folder in the app store?

    When I go into my app store and click under updates it says purchased and I can click that and all my apps show up but I can't get them back onto my home screen of my phone where I would like them. Someone help!

    When I go into my app store and click under updates it says purchased and I can click that and all my apps show up but I can't get them back onto my home screen of my phone where I would like them. Someone help!

  • My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds- Can anybody help? Has IOS7.0 but the most up-to-date version

    My iPad won't charge after plugging into my computer and after holding down the power and home button at same time for 10 seconds… Can anybody help? Has IOS7.0 but not the most up-to-date version

    It's just the battery sign - nothing else. I've tried to reboot by holding down both power and home key for 10+ seconds, waiting for the apple logo - but nothing happens. It's plugged into the imac at the moment. I tried to recharge it overnight using the normal charger - but no luck. It went dead during a Skype call with a friend - even though it was powered into the mains - albeit at a low battery level at the time

  • Hi as iam changing the ical message allert date to daybefore automatically it is changing to on the date please help me, hi as iam changing the ical message allert date to daybefore automatically it is changing to on the date please help me

    hi,
    As iam changing the ical message allert date to "daybefore" automatically it is changing to "on the date"   
    please help me,

    You could simplify the decode(... into to_char(sysdate + 1,'d')
    select sysdate + level input_date,
           TRIM(TO_CHAR(SYSDATE + level,'DAY')) the_day,
           DECODE(TRIM(TO_CHAR(SYSDATE + level,'DAY')),
                  'SATURDAY',1,
                  'SUNDAY',2,
                  'MONDAY',3,
                  'TUESDAY',4,
                  'WEDNESDAY',5,
                  'THURSDAY',6,
                  'FRIDAY',7
                 ) daynumber,
           to_char(sysdate + level + 1,'d') alternative
      from dual
    INPUT_DATE
    THE_DAY
    DAYNUMBER
    ALTERNATIVE
    10/14/2013
    MONDAY
    3
    3
    10/15/2013
    TUESDAY
    4
    4
    10/16/2013
    WEDNESDAY
    5
    5
    10/17/2013
    THURSDAY
    6
    6
    10/18/2013
    FRIDAY
    7
    7
    10/19/2013
    SATURDAY
    1
    1
    10/20/2013
    SUNDAY
    2
    2
    10/21/2013
    MONDAY
    3
    3
    10/22/2013
    TUESDAY
    4
    4
    10/23/2013
    WEDNESDAY
    5
    5
    10/24/2013
    THURSDAY
    6
    6
    10/25/2013
    FRIDAY
    7
    7
    10/26/2013
    SATURDAY
    1
    1
    10/27/2013
    SUNDAY
    2
    2
    10/28/2013
    MONDAY
    3
    3
    Regards
    Etbin

  • Will Apple allow you to advertise related PRINTED books in the back of your iBooks Author eBook?

    I know from reading somewhere that Apple will not allow you to advertise for competing format eBooks inside an iBook Author created eBook. That if you do this, your eBook will be rejected. HOWEVER, will they allow an author to advertise related theme PRINT books? I'm revising an already published eBook and the author has requested that we advertise 2 of his books that are available as print only (not ebook) editions in the back matter. Anyone know for sure?

    Hello
    you may find interst to read this apple article how to
    Mac OS X v10.6 Snow Leopard: How to Erase and Install
    http://support.apple.com/kb/HT3910?viewlocale=en_US
    procedure is almoste the same for all OS X system version
    HTH
    Pierre

  • Get all the back schedule start date except last and current month

    Hi All;
    Below gives me last month  schedule start
    scheduledstart >= DATEADD(mm,DATEDIFF(mm,0,GETDATE())-1,0)
    AND scheduledstart < DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0)
    Below gives me current month  schedule start
    scheduledstart >= DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()), 0)
    AND scheduledstart < DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE())+1, 0)
    I need to find all the schedule start excluding current month and last month
    Any help on this much appreciated
    Thanks
    Pradnya07

    Hi,
    You could use NOT BETWEEN with the start date of last month and the end date of the current month:
    AND schedulestart NOT BETWEEN DATEADD(mm,DATEDIFF(mm,0,GETDATE())-1,0)
    AND DATEADD(MONTH, DATEDIFF(MONTH,
    0, GETDATE())+1,
    0)
    Hope this helps,

  • How do you get back to your home screen?

    i have put the music i want on my ipod and listened through it but now i cant get back to the homescreen and settings :s     can any1 help?

    I have the same problem.  I found a thread on here which said go to your local apple genius bar(?) but I don't have a local shop.
    I have followed the  instructions which are:
    - swipe right (or was it left?)
    or - push and hold on the screen
    but neither works.
    I would love a solution to this, or do I have to send off my new present? :-(

  • Does Time machine clone your system or back up your data files?

    I use superduper to clone my mac and its great. I got time capsule this morning and just want to know is it just your user files time machine backs up or does it clone your system?

    Hi there, I apologize for contacting you this way about your iphone for sale on eBay, its just i dont have an ebay account. Im from celbridge myself and im wondering if i could purchase the phone for the current price. My own iphone broke and need one asap. My number is 086 326 0110. Thank you. I look forward to hearing from you.
    Emma Connolly
    You can reply to me at [email protected]

Maybe you are looking for

  • Import entourage database into Outlook 2011 for mac

    I set up a new macbook from a time machine backup. The main identity for entourage was from the original date of install. Unfortunately, I didn't notice that when I did my initial import so it brought in about two e-mails from 2 years ago but not the

  • Creating Scrollable text frames in InDesign

    I've been trying to create scrollable text frames in InDesign CS6 and, for the life of me, cannot figure out how to do so for an interactive PDF.  I've done so for touchscreen devices before through DPS and the scrollable frame option, but I've never

  • More information regarding 'Don't Use SOAP Envelope' in SOAP sender Adapter

    Hi, maybe this document could help you: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79 It says about selecting Do Not Use SOAP Envelope. > In this case the sender SOAP adapter requires an addi

  • Reports 9i Portlet

    Hi, I have a portal page in which I have created a oracle reports 9i portlet that is .pdf format. The problem is that the adobe box that comes up in my region is very small. Is there anyway to make this bigger?? I've tried making the region bigger bu

  • QT failed to initialize error -2096 & Windows 2003 Server

    I have seen several posting regarding this, but all are related to ITunes. I have Quicktime 7.4.1 installed on a WTS Server and when I try to run it I get the 2096 error. Since 7.4.1 addresses security issues, reverting to a previous version is not a