Help - my BlackBerry messages are getting stuck.

I've used BlackBerry messenger for a while but suddenly my outgoing messages seem to be getting stuck. I get a tick to say they've gone but they don't get delivered straight away. I know it's not a signal problem with the receiving BlackBerry as I've tested that. The messages go through eventually, usually when the other person messages me. Any ideas? Thanks

I would guess you are experiencing some server slowdown, as I have noticed also in the past day some few messages get the tick mark for a few minutes before the D-delivered appears.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Messages are getting stuck in PI system

Hi All,
we were testing a SOAP to WS scenario in PI 7.1 but unfortunately message are getting stuck in PI system due to below error.
- <sap:ExceptionChain xmlns:sap="http://www.sap.com/webas/710/soap/runtime/abap/fault/system/SystemFault">
- <sap:ChainedException>
<Exception_Name>CX_SOAP_SEQ_EX_TO_QRFC</Exception_Name>
<Exception_Text>wsrm create failed</Exception_Text>
</sap:ChainedException>
- <sap:ChainedException>
<Exception_Name>CX_SOAP_CORE</Exception_Name>
<Exception_Text>SRT: Error in WSRM Soap Application</Exception_Text>
</sap:ChainedException>
- <sap:ChainedException>
<Exception_Name>CX_SOAP_FAILURE_FAULT</Exception_Name>
<Exception_Text>SOAP fault when calling Web service</Exception_Text>
</sap:ChainedException>
- <sap:ChainedException>
<Exception_Name>CX_SOAP_FAULT</Exception_Name>
<Exception_Text>Authorization missing for service , operation "CreateSequence"; more details in the web service error log on provider side (UTC timestamp 20140616182623; Transaction ID 539C7F7350800420E10080000A4911BD)</Exception_Text>
</sap:ChainedException>
</sap:ExceptionChain>
Hope someone have an idea.
Regards,
Vinod

Hi Vinod,
One possibility is the user does not have access to this operation. Please check with any other user (with more access) the same operation.
regards,
Harish

Exchange 2013 SP1 server working for several months now messages are getting stuck in drafts folder

This a small, simple environment. There is a MS Server 2012 R2 server hypervisor with a MS Server 2012 R2 VM running Exchange 2013 patched to SP1. This server has been deployed into production and passing mail without issues for several months.
Upon initial deployment, we experienced the issue that many have reported and that has been widely documented where Mail Flow works fine inbound, but outbound will stick in the drafts folder. We resolved the issue by manually configuring the IP Address of
our internal DNS server (which is an installed role on our hypervisior / base layer server). The issue was immediately resolved and mail was flowing in both directions without issue. We later installed SP1 and there was no issue. Mail has
been flowing normally all the while.
Now fast-forward through several weeks of reliable mail delivery... We experienced a power loss and a system shutdown and upon reboot, inbound is working and outbound goes to drafts. I've confirmed DNS Lookup settings in ECP still points to our internal
server as previously configured. Both servers have internet access, NSLOOKUP returns expected values, and DNS appears to be working normally.
I'm not sure if we had an MS Update that installed with the reboot that caused the breakage, if there was a lingering settings change that took effect on reboot, or what is causing the interruption. I'm looking for some fresh ideas on where to look
for answers, and all the information available on the drafts folder issue points to DNS settings that have already been put in place.
Any constructive ideas are welcome! Thanks in advance.
David

Amit,
Long story short, I'm not sure how or why, but there were a few automatic services that were not starting "automatically." I'm used to seeing some services that are triggered by the application to start and stop on their own, so I didn't necessarily
panic when there were a few automatic services that were stopped..
However, The MS Exchange Health Manager, and the Mailbox Submission services weren't running. After manually starting the services my drafts folder emptied and we are back in business.. Maybe not "innovative" as you said, but it certainly put us on
the right track. We were looking so hard at DNS because of all the reported cases of "stuck in drafts" being related to DNS, we totally overlooked the obvious, so THANKS!
Now the only question is, what stopped the services and why did they not restart automatically??

How the ASN in or out messages are getting created whenever there is any action performed related to these messages.

Hi ,
Can any one please let me know with an example like,
I have receive the ASNin message in SIM and then ASNOUT will get created and flowes to RMS.
How these ASNin or out messages are getting created.

Hi Keith,
You stated that "I think Geoff's showing remarkable tolerance by not just deleting the whole thread." Are we in the third world countries that there are no freedom of speech?!!!
I appreciate your help.
Some of you mentioned that I don't know how to use it. I have a question for you where did you learn how to use Lightroom? I learned the same way everyone learns. Study the subjects by reading books, videos, taking classes and enroll in some kind of training. I am following all the instructions that I can my hand on. I wish that instead of accusing me of not knowing have a different view of the issue. What if there is a bug in the program? Some of you were and are very successful and that does not mean that the program does not have some issues. We all use the program differently, and with these differences ways in using it some problems will come out for some and not for others.
I am not promoting one program over the other, and I am not putting Lightroom down. I am just expressing how I feel. Put yourself in my shoes and spent just hours creating some renaming templates and suddenly you find out that it is not there anymore and all your efforts are gone with the wind. I then go and search through the internet to find out what did I do wrong and how to solve it. I find out that I am not alone, and there others that still waiting for the solution to come.
Let be open and do not hush people, and when you do that it will be the end of any progress or improvement on how everything is.
I would like to express my deepest gratitude to all of you. You are all supportive and very helpful.
Thank you and have a very Happy New Year.
Mo

Messages are getting lost during server restart

Hi,
we have a clustered environment.
soa_server1, soa_server2, soa_server3 and osb_server1, osb_server2, osb_server3
Queues are configured on each server.
Overall process flow is (JMS Queue (configrued in soa_server1) --> BPEL --> mediator -->JMS (configrued in osb_server1) --> proxyService --> Target System.
When there is a need to bounce the server (start / stop) ; and to make sure messages are not lost during server bounce.
we are following the below procedure for server start
1) pause soa_server1 queues then bounce soa_server1
2) pause soa_server2 queues then bounce soa_server2
3) pause soa_server3 queues then bounce soa_server3
We are observing there is a message lost after server bounce...
thanks in advance
anvv sharma

Are you using XA connection factory? If no then this may cause message loss. It is also considered a best practice to configure error queue for JMS queues to avoid message loss (as a precautionary measure).
How did you find that messages are getting lost?
Regards,
Anuj

I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space.

I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space. What is the problem. I am not getting to know. Even after i reinstalled these apps it is still getting stuck and it is very very slow. Is this what i get after paying so much money for ipod. Is this what i get very poor perfomance.

Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
Next
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

My messages are getting into my ioads

all the messages Im getting on my iphone are now duplicating to my Ipad.

Are the messages your brother is getting being sent via iMessage? (They will have a blue background. Regular incoming text messages have a green background) if so, your brother needs to go to Settings --> Messages --> Send & Receive --> and uncheck your phone number by touching it.
Hope this helps. (I had the same issue.)

Emails are getting stuck in my outbox

We are using Outlook 2003 with a Gmail IMAP account. Everything was working fine until today when emails started getting stuck in my outbox. I used to be on an exchange server but have recently switched email accounts and added the IMAP to
my old outlook. What should I do so that i can send emails without them getting stuck?

Hi,
Maybe you are working Offline:
http://office.microsoft.com/en-us/outlook-help/switch-between-working-offline-and-online-HP005242598.aspx
http://office.microsoft.com/en-us/outlook-help/switch-between-working-offline-and-online-HP001232960.aspx#BM4
Or
A corrupted Outlook profile, please try creating a new Outlook profile for test:
http://support.microsoft.com/kb/829918
If it doesn’t work, check the configuration of Gmail in Outlook:
Please Note: Since the following web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
http://support.google.com/mail/bin/answer.py?hl=en&answer=77689
Sincerely
Rex Zhang
Rex Zhang
TechNet Community Support

Desperate user need help. My GPIB instrument get stuck with my labview program frequently

Hello to all labview users,
i am a beginner in using labview. I am currently writting a labview program to automatically control a digital control rotator HD201e and a network analyzer 8720a to work with the anechoic chamber. The program receives an initial position, amount of increment and # of steps. My program will then ask the controller to rotate to the initial position and at the meantime, the program will monitor the position of the rotator to ensure the requested position is reached. After that, at the position, the program will ask the NA to perform a reading of the measurement. Once the reading is done, the program will ask the controller to rotate to the next position and does a reading of the measurement and so on.
My program seems to be able to perform the tasks; however, the dig.controller part seems to get stuck around 50% of the time when running the program. Sometimes, even the controller receives the requested position (can be seen from the lcd screen of the controller), the rotator just simply would not rotate; also, sometimes, the controller just simply does not respond when sending the command of moving a position, as in the debug mode (the one with a lightbulb), i see that i got "ok" on all the blocks in the writing portion ofthe program, but the controller just doesnt seem to receive the position (as seen no new position received from the lcd screen) and the cursor on the lcd screen blinks weirdly, due to that problem, my program will then get stuck in an infinite loop.....
Usually, that problem occurs after few positions have been reached.....
so, when that happens, i have to stop my program and re-run it. that means the program will have to re-do the measurement that were read previously....
sometimes i have to stop and re-run my program several times to get all the measurement of all the positions done.....so...that bug renders that program to be an unefficient program.
I have been trying to resolve that bug for weeks...but no success....i have tried to put some wait time between each block....result is not much different...
I have also tried putting "clear" block before and after the "write" block.....same problem.....
I have heard that the serial GPIB "flush" block may help...but i tried..but it seems the controller doesnt recognize/accept flush....
i have also tried using the "Visa open" and "Visa close" block to see if ithat reduces the stucking thing....but seems that the controller can still get stuck....
i have also even tried using "lock asyn" and "unlock asyn" block...but didnt seem to work....
Has anyone experienced such problem.? Is it a known problem with some gpib instrument?
Is there any discrepancy or bugs in my program that i am unaware of that causes this problem?
Any advice and or opinion would be greatly appreciated....
PS: i attached the controller part of my program and the overall program
desperate happyguy......
Happy guy
~ currently final year undergraduate in Electrical Engr. Graduating soon! Yes!
~ currently looking for jobs : any position related to engineering, labview, programming, tech support would be great.
~ humber learner of LabVIEW lvl: beginner-intermediate
Attachments:
HD201_Controld.jpg ‏231 KB
AChamber_Measurements_v1d.jpg ‏857 KB
AChamber_Measurements_v1d3.jpg ‏463 KB

hi xseadog
i got what you meant about the gpib reference
actually, that final frame works because the gpib reference is already done inside that subvi.
but my problem doesnt arise from that. most of the time ive seen, it arises between the writing frame and the while loop frame. as i mentionned, sometimes. the controller just simply doesnt rotate even i can see the requested position display on the controller lcd screen; also sometimes, just the controller is stuck without acknowledging the write position command. but in labview...while in debug mode. it is shown ok on the block.
Happy guy
~ currently final year undergraduate in Electrical Engr. Graduating soon! Yes!
~ currently looking for jobs : any position related to engineering, labview, programming, tech support would be great.
~ humber learner of LabVIEW lvl: beginner-intermediate
Attachments:
HD-201 RPosd.jpg ‏39 KB

Error messages are getting swapped in b/n Idocs

Hi everybody,
I am using SAP R/3 6.20.
I have scheudled a background periodic batch job which automatically reprocesses the error IDocs of the same message type (say M1). It runs every 5 minutes and reprocesses all M1 IDocs in error created on the day the job runs.
The problem now is, I have noticed that the error messages of these IDocs are getting swapped in between.
eg:
The IDoc 1122123 has an error message 'Batch B1 for material M1 does nto exist for Plant P1.'
The IDoc 1122124 also has this error message, but it is not relevant to this IDoc.
The Inbound function module (say I-FM1) being used for this is adapted from the standard SAP function module
IDOC_INPUT_DELVRY.
The background batch job executes a variant of standard SAP program RBDMANI2. The parallel processing of the IDocs in the RBDMANI2 variant has been set to YES and the Packet size is set to 5.
I have observed one more thing. The original FM has implemented the SAP Note 817223, which the inbound function module I-FM1 of message type M1 hasn't. Does this impact? I will also addd that all the internal tables are refreshed properly before the start of the function module I-FM1.
Kindly let me know your views.
Thanks in advance.

Hi surya,
You are saying 1122124 is IDOC numner & its not relevant to this idoc.
What it means,can u explain??? Actually there will be a chance an IDOC can mapped to N no of documents. This mapping will done through a BADI internally.
Regards
KER

Highjump Messages are Getting error response from Peoplesoft

Hi,
We are on PT 8.52 and 9.1 PeopleSoft FSCM. We have integration with highjump for our supply chain operations.
We are getting below error message occasionally on highjump and the message will be sent to PeopleSoft if you resubmit that same message again from HJ.
A COM error occurred running the execute function in the [XmlLinkSend.XmlSend]
COM object to process the [XML Send AdvLink Work Queue] event.
Exception number (0x80040001).
Return Code (0001).
Source [XmlLinkSend.XmlSend].
Description [An er E_04001 O2012101811:00:10.855S
1SMGR 000
Any info on why these errors are coming on highjump logs will be appreciated.
Thanks

Hi surya,
You are saying 1122124 is IDOC numner & its not relevant to this idoc.
What it means,can u explain??? Actually there will be a chance an IDOC can mapped to N no of documents. This mapping will done through a BADI internally.
Regards
KER

Gmail emails are getting stuck in my exchange outbox

I am using Outlook 2010 with my Gmail IMAP account and am having an issue where sometimes emails that I send from my Gmail IMAP account, get stuck in my exchange outbox. My exchange server hasn't been connected for at least 6 months now, and the only reason
I haven't deleted my exchange account from Outlook is because I often need to refer back to my old emails.
Why does this happen and what can I do to fix it? I've read some other threads with similar issues but an important thing to note is that my exchange account is always offline as it is not connected to a mail server. Any assistance with rectifying this issue
would be great as there is no warning at all that the messages have failed to send and it's not a constant issue, only happens sporadically but enough to make me consider not using Outlook anymore.

Sounds like you have two email accounts in one profile, Exchange and Gmail IMAP. Try to set the IMAP account as the default to test it. For logic, if you send a message through IMAP, the send message would stay at IMAP sent folder but not Exchange folder.
Thanks.
Tony Chen
TechNet Community Support

Movies downloaded to my ipad are getting stuck and I get a blank screen

I donwload a couple episodes from a tv show, the first 3 episodes were great I saw them no problem, BUT then when I dowloaded the 4, I started watching and when it get to 75% of the episode stops, if I go back it gets stuck on the same part, then i get a blank screen and I have get out of the application if I get back on still the same blank screen, I downloaded the follwing episode from the same show and still the same problem.
I though that it could be space on the Ipad - I deleted some application and still the same problem....
I don't want to keep downloading and paying for something that is not working properly
This is only happening with I tunes - I'm able to watch ABC apps and Netflix...
Can you help me?

Have you tried copying them to your computer and seeing whether they play ok on your computer's iTunes, in case the download itself is corrupt ?
If the Videos app is still stuck, then try searching for the name of one of the videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
If that doesn't work then try closing the Videos app completely : from the home screen (i.e.not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My tv show and movies are getting stuck in the processing file stage

I purchased some TV show episodes and movies on itunes. They are stuck in the processing file stage, and wont let me pause them and restart. When I close itunes it wont open again. I have to restart my computer. Please help, they have been stuck for over a week now.

please contact me on [email protected]

Help! My itunes is getting stuck on the backup 1 of 5 step and won't go further.

For months now I have been trying to update my iphone 4. I plug it in and my itunes recognises it and starts the sync, however it seems to get hung on the part 1 of 5 backup bit - i have tried several times for varying lengths (hours) of time and each time I just get frustrated and unplug and then forget about it for a while. My worry is that I have purchased a lot of music on my phone and I don't want to lose it / I want it to be on my computer as well as the mere fact that I would like my phone to be backed up and have the current IOS etc..
If possible it would be good to get this issue fixed without having to lose all my playlists and music etc from my itunes.
Any help in this matter would be VERY much appreciated.

Go to iTunes/Edit/Preferences/Devices and delete your latest backup. iTunes has to be able to read your backup in order to replace it, if it can't be read, iTunes will stop at step one, which is backing up the device.
You can copy your purchased items to your computer without syncing. Right click on your phone in the device list and choose
Message was edited by: Ingo2711

Help - my BlackBerry messages are getting stuck.

Similar Messages

Maybe you are looking for