HELP MY COMPUTER FREEZES ON MY MAC OS X 10.4.9 TIGER...WHATS WRONG??????

Hello my name is john,
It the last couple of days..it has been showing in my display screen in several languages " shut down your computer/ restart your computer" and I tried restarting my computer but every single time it freezes during the startup showing a question mark. So Yestarday i took it to the mac genius from the apple store, they did the basic(principal) thing in the guide book...re-install the operating system but it didn`t work they tried it by using an external hard drive, but it forze several times during the installation process & must of the times it didn`t display the internal HDD drive. Today in the morning i tried re-installing all my operative system first try the classic mac os 9.1, seocnd attempt the mac os X 10.0.3, and the last try the mac os X 10.4.6 Tiger but every single time/intent did`nt work for nothing, it always display a message about a panic and showing a bunch of numbers.
If anybody has any idea, tips of what steps need to be taken...PLESASE POST YOUR COMMENTS
DOUBLE THANKS
John

Hello John
Like tjk said....replacing a logic board could be expensive.....according to a wikipedia article "Laptop computers generally use highly integrated, miniaturized, and customized motherboards(which is a logic board). This is one of the reasons that laptop computers are difficult to upgrade and expensive to repair. Often the failure of one laptop component requires the replacement of the entire motherboard, which is usually more expensive than a desktop motherboard due to the large number of integrated components.
but try this website : www.powerbookmedic.com there you could find a logic board for $ 300.00.
Good luck to you with your computer,
J.J.P.A

Similar Messages

  • Need help with computer freezing up.

    I seem to be having some trouble with my computer freezing up from time to time. Usually it's when I'm using the program Transmission or Toast Titanium. I can't access the applications files, the Dock icons or do any force quit on the programs. Also I can't do a restart or shut down. I have tried using the keystrokes to shut down and restart, but as well this doesn't work. Everything gets frozen. The only way I can stop the freeze is to manually turn the computer off by the on/off button in the back of the computer. I have heard it is really bad to do so. What else could I do when the computer is frozen like this to get it unstuck? Also being that this has happened a few times, how do I correct the programs so that it won't keep happening?
    Thanks.

    Hi,
    When you run a program in Mac it loads the necessary information to the RAM and access it from there. If other programs are running in the computer along with the Toast Titanium then there is a possibility of the memory unable to address all the requirements. The best way is to keep an eye on the memory usage from Activity monitor when you start using the Toast next time.
    While trying to burn the data into a CD the files are first loaded into the memory so that it will be written to the disk. So what I will suggest is to close all the applications and wait for a reasonable amount of time to see whether the computer frees up memory and starts to write onto the disk.
    If not, you will also need to free up some hard drive space.
    Also in the ~/Library/Logs/Crash Reporter look for crash files and see what is causing the issue.
    Shutting down the computer with the Power on/off button is not that good however if nothing else is working, you have no choice other than that.
    Hope that helps....
    I wanted to add few more tips.

  • HT3371 my macbook isn't charging anymore. there is nothing wrong with my charger or my electricity. I think it's my battery. I conducted command+p+r and it help my computer charge up, but now it's not working anymore.  what can I do, I have a school compu

    School starts in two weeks, so I can't see the technician, until then. What can I do I really need my computer. I've already tried command p r.

    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
        1.    Select Disk Utility from the main menu and click on the Continue button.
        2.    After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
        3.    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
        4.    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and pasted above

  • When upgrading OS from Mavericks to Yosemite, the computer freezed at "Running package scripts" and don't go further, what should I do now?

    iMac 21.5"/IRISPRO/2.7QC/2x4GB/1TB OS Mavericks. When upgrading to Yosemite, time remaining is 8 minutes and freezed and don't go further for couple of 6 hours. What should I do now?

    Force a restart by holding down the power button. See what happens.

  • **Help** Cant get into my itunes due to error message....whats wrong ! Help

    Error message says....
    "Itunes cannot run because its detected a problem with your audio configuration"
    What does this message mean? My itunes was working fine yesterday. I have tried installing it today but this has not worked.
    I would appreciate any help here.
    Thanks.

    Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes 7 for Windows: iTunes has detected an audio configuration problem

  • I attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded, now computer freezes after trying to load everything.  possible to reverse this?  options?  restore hd from time machine?  pls help!!!

    long story short...i attempted to import pics from iphoto to a folder on my desktop but somehow clicked desktop so 45,000 pics loaded to my desktop and now my computer freezes up after trying to load everything, and i'm not able to just drag the photos into the folder.  is it possible to reverse this?  what are my options?  restore hd from time machine?  
    a further question to restoring my hd from a previous backup on time machine...it says it will erase the hd.  does it actually erase everything or does it just erase anything that may have been added or downloaded since that backup?  this is confusing to me.
    another problem which is part of the original problem is it seems that when i connect my iphone to my computer and iphoto uploads my pics...it doesn't just upload new ones, it duplicates and uploads every picture again...which is why i have 45,000 pics...they are 40,000 duplicates!  what's up with that? 
    I have a macbook pro, and recently updated the os to Yosemite.  the iphoto app is out of date, but i'll worry about that once i can figure out how to get all those pics off the desktop.  also, i recently purchased and installed 8g of new ram, but that hasn't seemed to help. 
    any advice would be appreciated! 
    thanks!!

    thanks for replying. 
    the booting and walking away and then attempting to browse and clean method is what i've been trying to do.  it won't let me drag and drop and just freezes up and goes to sleep after 2 minutes.  it's a never ending battle with very few results. which is why i questioned the method of just restoring the hd from a time machine backup.
    do you think restoring the hd from time machine will resolve the issue with all pics on the desktop?  and everything will be as it was from the date i restore it from?  sorry, as you can tell, i'm not overly computer savvy. 
    i have a really old desktop mac...i can try connecting the two...how does one boot a mac in 'target mode'? 
    as for the iphoto cleaning and organizing issue...that is what i was trying to accomplish with importing them to a folder.  was going to browse and clean from there...but somehow imported to desktop which is what's complicating everything.  once i get them off the desktop i can work on the iphoto issue...which as i mentioned...i didn't take 45,000 pics...i've just taken about 4,500 over the last few years, and they are being duplicated in iphoto.  this was my attempt to clean it out entirely and start over.  it will basically be a lot of deleting.
    one problem, seems to lead me to more...which is just my luck.  :-) 
    thanks again, for your help.

  • I made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft helps in stop freezing?

    i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft i.e, " support.microsoft.com/kb/979491" helps in stop freezing in dual boot mechanism?

    Windows has a software updater built into Windows and when you install the Boot Camp drivers then it will install an Apple software updater also. I believe Windows is set to automatically download and install your updates as does the Apple software Updater. They both will update the individual files it needs to periodically.
    "Microsoft updates" and "Windows updates" are basically the same thing in Windows. Are you talking about the "Windows support software" when downloading from Boot Camp Assistant? Apple installs a software updater for it's Boot Camp drivers in Windows 7 so you can do it manually or automatically.
    The "Hot Fix" your referring to is only for certain motherboards built from other Windows only computer manufacturers and does NOT pertain to any Apple computers.
    If you have a problem with your computer then it's best to ask a specific question so we can help better.

  • Just installed new OS, computer freezing... HELP!!

    Hey all,
    So as I've been posting between here and the Panther forums recently, I belatedly upgraded my OS over the few days from the last version of Panther to the last one of Tiger, and now I've been having a frequent problem with the computer freezing.
    Granted, I've had this computer crash on me before; sometimes it's with that Glazed-over grey screen & telling you that to hold down the Power button to restart it, sometimes, the mouse icon will just FREEZE up, and I'll also have to hold down the Power button. That latter type is the more common one, and though it may happen every few weeks or so, just today alone, I've had it freeze up on me FOUR TIMES. Even now, I used my old Panther boot partition--which I'd cloned to my external firewire drive--to boot up from and write this.
    So I'm lead to believe it's either some problem with the new OS, or the computer itself. The thing is, this is a previously used G4, one I'd inherited from my brother, who said that it used to crash on him almost daily. He suspected it was because of either a problem with
    A) the internal drive (the drive IS a 111.8 GB one, which seems a bit unusual for a boot drive; my old G4 came with a 20GB one, I haven't heard of many pre-installed internal drives being 100 GBs, though I could be wrong), or
    B) 3rd party RAM that he'd had installed when he bought it, which perhaps wasn't quite as good as Mac-made RAM.
    Anyway when I took it over, I made sure to reformat and zero-out the hard drive, and didn't seem to have AS many problems. However, obviously if I've upgraded to a higher OS--which of course would cause more wear on the computer--if the RAM was at all compromised before, then that would DEFINITELY be I'm having an issue now.
    I verified and repaired ALL partitions before I installed this--on the 2 partitions of the internal, and my external--and they seemed to come up okay. I'm just like to try trouble-shooting--whether I need to run some tests, or make sense of the Crash Log(s)--on what could not only CONTINUE to be causing to this computer to crash, but have made it worse.
    Admittedly I'm a computer noob, so I'm hardly the most knowledgeable person when it comes to detecting problems. Thing is, I really hope that this computer can tide me over until I upgrade to a newer PowerBook or iMac within the year, and was even going to try installing and learning some new design programs in the meantime. However, I don't want to get too comfortable with it--****, I CAN'T--or waste my time and money installing a software or a new RAM or an internal drive if there's no hope to salvage this thing.
    PLEASE help! Thanks.
    +_Other specifications_:+
    +Machine Model: Power Mac G4+
    +CPU Type: PowerPC G4 (3.3)+
    +Number Of CPUs: 2+
    +CPU Speed: 1.25 GHz+
    +L2 Cache (per CPU): 256 KB+
    +L3 Cache (per CPU): 1 MB+
    +Memory: 1.25 GB+
    +Bus Speed: 167 MHz+
    +Boot ROM Version: 4.6.0f1+
    MEMORY
    DIMM0/J21:
    +Size: 256 MB+
    +Type: DDR SDRAM+
    +Speed: PC2700U-25330+
    DIMM1/J22:
    +Size: 512 MB+
    +Type: DDR SDRAM+
    +Speed: PC2700U-25330+
    DIMM2/J23:
    +Size: 512 MB+
    +Type: DDR SDRAM+
    +Speed: PC2700U-25330+
    DIMM3/J20:
    +Size: Empty+
    +Type: Empty+
    +Speed: Empty+
    +*ATA SPECIFICATIONS:*+
    +ATA-6 Bus:+
    +Vendor ID: 0x106b+
    +Device ID: 0x0033+
    +Revision ID: 0x0000+
    ST3120026A:
    +Capacity: 111.79 GB+
    +Model: ST3120026A+
    +Revision: 3.76+
    +Removable Media: No+
    +Detachable Drive: No+
    +BSD Name: disk0+
    +Protocol: ATA+
    +Unit Number: 0+
    +Socket Type: Internal+
    +OS9 Drivers: No+

    Nope, it'd just been the 1 "loop" (what does that even MEAN, by the way?) that had been the default when you first download and use Rember. Again, I even shut down both the display and computer "sleep" features in Energy Saver, and it ended up taking 4525 seconds, or 75 minutes.
    Although "all tests passed," should I consider such a lengthy test-time as a red flag? Why would it be taking so long for such a test??
    So assuming the RAM in question IS actually okay, I guess the next question is whether the computer freezing (which happened AGAIN, right before I was going to post this; Firefox was one of the only programs I had running) is due to:
    A) Problems with the internal/boot drive itself (again, it IS an 111 GB drive on a G4 a used G4, I'm not sure if that's a standard factory-issue drive, and the family member who passed this computer off to me doesn't remember either). If you know of any OTHER ways to test it to make sure it's not compromised or failing (since it already seemed to come up okay on Disk Utility), I'd appreciate it.
    B) Problems with the Tiger OS itself. Although the installation of it went all right, the computer DID freeze while I was doing the upgrade from 10.4 to the 10.4.11 package in Software Upgrade afterwards, so maybe that's somehow compromised the entire OS. So if there's any way to DOWNGRADE to 10.4.1, and REDO the packaged upgrade, let me know.
    C) Possibility that I should still increase my RAM either way. Again, of the 4 slots, I have 2 512-pieces, 1 256, and 1 empty. So I COULD upgrade add another to the empty slot, or increase the 256 to a 512, or both. If you know of any reputable places online or elsewhere where I can buy compatible RAM for this G4, I'm all ears. I DO have some RAM on my own OLDER 2000-model G4, assuming it's even compatible (I'm sorry to say I don't know that much about RAM, never having purchased any on my own).
    Any feedback or suggestions would be greatly appreciated. Thanks!

  • My final cut is running extremely slow after having for 6 months.  I use external hard drives and save nothing on my computer.  it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help

    my final cut is running extremely slow after having for 6 months.  I use external hard drives and save nothing on my computer.  it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me.  I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5

    What did Apple tell you about what they did (or did not) find here?
    See if working on the main disk is any faster.
    USB2 is glacial, as I/O interconnects go.  And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too.  FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
    Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't.

  • When I finally 'upload' a book from iphoto my computer freezes.  Can you help?

    When I finally 'upload' a book from iphoto my computer freezes.  Can you help?

    Boot into Safe Mode and try again.
    If that doesn't work:
    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • HT1338 When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    Could the disk have failed?
    Can you hear it?
    Boot from the install DVD and see what Disk Utility says.

  • I just had to buy a new computer because my "vintage" Mac died. after migrating my backup drive over my Adobe creative suite no longer wroks I get a 150:30 error code HELP!

    I just had to buy a new computer because my "vintage" Mac died. After migrating my backup drive over to my New mac book my Adobe CS no longer works. I get a 150:30 error code HELP!

    You need to reinstall it properly, not use migration.
    Mylenium

  • I bought a season and while it was downloading my computer freezed... help!

    I bought a tv series and while it just started to download the first 3 episodes my computer freezed. I manually turned off my computer then when i opened itunes again there was nothing in the tv shows or movies and there was nothing in my purchased folder. I spend 27 dollars on the series and now i dont know how I can watch any of the episodes. Does anyone know how to solve this problem?
    I tried going to the series in the itunes store and I thought maybe i could just redownload them through there but it wants me to purchase them again.

    Look under the Store menu in iTunes for the "Check for purchases" command and run that. You may find the episodes there to be downloaded.
    If not, contact the iTunes Store using the form linked from the bottom of the Download FAQ web page and explain the problem to them.
    Good luck.

  • After turning my mac on the icons pop up at the bottom of the screen and than after 2-3 seconds the computer freezes and I can't open anything up. I did a hardware test and everything was fine. How do I get the computer to stop freezing

    After turning my computer on the icons come up on the bottom and then the computer freezes. I have done a hardware test that shows no problems. I can move the arrow around the screen but everything freezes after the icons pop up on the bottom of the screen. Any suggestions?

    After turning my computer on the icons come up on the bottom and then the computer freezes. I have done a hardware test that shows no problems. I can move the arrow around the screen but everything freezes after the icons pop up on the bottom of the screen. Any suggestions?

  • My computer freezes completely when i connect colour iopd photo.. help

    my computer freezes everytime i connect my colour ipod photo up to it.. im using itunes 7 but too... my computer has to be reset to work again.. any ideas or suggestions as to why thats happening and any tips to fix it?

    Going to start a new topic for a poll...check to see if you ahve one or several RavMonE.exe processes running in the task manager window.

Maybe you are looking for