Help my Display does flicker
Hey i have a iMac G3 400 and the dispaly dies flicker.. what is there wrong? who can help me?
Hello and welcome to the discussion boards!
Have you checked for interference? That is, electromagnetic interference from cordless phones, speakers, in the power supply (house's circuit), or HDDs?
The reason I ask is that I was experiencing the exact same issues - until I traced it to my external Hard drives being too close to the back of the iMac - the magnets in the drive head were affecting the CRT anode. Moving the drives to ~18 inches (45 cm?) from the monitor helped. I also noticed that talking on a cell phone near the Mac, or having external sattelite speakers up too loud can have an effect. The iMacs don't have great EM shielding, i suppose.
As per what I said about the household power circuit - have you ever plugged a vacuum into the same outlet as a TV, and noticed the fuzz on the TV? More or less the same thing - noise being transmitted through the power supply.
Hope that helps,
Dan
Similar Messages
-
Part of my iPad screen display does not show. It was not dropped and neither is the screen broken. I was advised to see the local service provider for a diagnosis.
I had finally managed to find time to find a local service provider last week (not easy) and was disappointed to be advised of Apple's policy of one for one exchange i.e. they wont repair and said that i would have to replace with a whole unit. As my unit is no longer under warranty, it meant that I had to pay for the full price of a new unit!
I might as well have paid for the latest new unit but since my unit is only 2 years old at most, it would be a great waste of money.
How can this be? Does this mean apple's product is inferior and do not last since warranty is only for one year?
I sincerely hope there is a favourable solution otherwse my money is flushed down the drain.
HELP!!!I was using my iPad last night, shut the power off and when I turned it on this morning 2/3 of the screen is not working. It looks like the pandalela picture. What is the answer to fix this; is this a screen issue or and electronics issues. Has anybody else experienced this?
-
Help please. Extended display won't work on MBP and AOC 20" 1600 x 900 60HZ monitor. Mirror display does. I've a mini dvd to vga converter cable. Should this work?
I have the same mini display port adapter and Belkin DVI-HDMI cable (but a Panasonic 42" Plasma HDTV) so just set this up on it to see if I could duplicate your problem, unfortunately for you (but good for me) I can't.
I connected the adapter+HDMI cable before switching the HDTV on and then powered up the MBP. It (the HDTV) came up with my background right away (it's set at Mirror not extended Desktop) and when I run System Preferences/Displays get the following. Sorry but all I can confirm is that adapter+cable combination should work ...
Try doing a Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys? -
I can not install the Express after the Extreme tha AirPort tool is of no help. It does not display any base station.
What is the exact model of the AirPort Express that you are trying to install? Which version of the AirPort Utility are you using? What is the operating system and version, and on what device, are you running the AirPort Utility on?
-
Help with displaying image received from socket on Canvas
Dear programmers
I know that I'm pestering you lot for a lot of help but I just got one tiny problem which I just can't get over.
I'm developing a remote desktop application which uses an applet as it's client and I need help in displaying the image.
When a connection is made to the server, it continuously takes screenshots, converts them to jpg and then send them to the client applet via socket communication. I've got the the server doing this in a for(;;) loop and I've tested the communication and all seems to be working fine. However the applet is causing some issues such as displaying "loading applet" until I stop the server and then the 1st screenshot is displayed. Is there a way to modify the following code so that it displays the current image onto a canvas while the next image is being downloaded and then replace the original image with the one which has just been downloaded. All this needs to be done with as little flicker as possible.
for(;;)
filename = dis.readUTF();
fileSize = dis.readInt();
fileInBuffer = new byte[fileSize];
dis.readFully(fileInBuffer, 0, fileSize-1);
//Create an image from the byte array
img = Toolkit.getDefaultToolkit().createImage(fileInBuffer);
//Create a MyCanvas object and add the canvas to the applet
canvas = new IRDPCanvas(img, this);
canvas.addMouseListener(this);
canvas.addKeyListener(this);
add(canvas);
}Anyone?
-
Airplay mirroring on Mac Mini (late 2012) doesn't work, extended display does... What's going wrong here?
Details: OS X Yosemite 10.10
Apple TV 3rd generation, version 7.0
Switching Airplay on on Mac Mini works. It goes automatically on extended display mode. Switching to mirroring works for about 1 sec and then it switches back to extended display mode. On my tv screen i see my second desktop. Funny detail: it has the desktop background i used previously. Another funny detail: I had exactly the same problem when i used the previous versions of OS X and the Apple TV software...
Who can help, please!I also have been having problems with Airplay on my 2014 Mac Mini see Mac Mini 2014 Airplay Display Disconnect Bug?
I"ve also noticed that my Apple TV (3rd Gen) does not appear in the iTunes Airplay list on my Mac Mini whereas it does on my MacBook.
I've booked a call with Apple Support for next Sunday to discuss the issue.
If I get any useful info I will pass it on. -
Need help on displaying the callers name on ip phone with cme using external directory
Hello Guys,
Need help on displaying the callers name on ip phone with cme while using external directory
Thank you,
KhajaThanks for your help,
Does it 100% work with CME. We use SIP and 2ring for external directory? Thanks you. -
Presenter Display does not update current slide or run timer ...
Hey - I'm a newbee, so forgive me is this is something obvious. When I run my presentation, the Presenter's Display does not update the current slide as the show progresses. Nor does the timer run. Nor are the notes displayed, even though I have checked all the appropriate prefs for all three. Help!
Yes, AIFF or WAV should work. I've never tried importing a SDII file.
A few more caveats, however:
1) A Recorded Soundtrack (i.e. with the Builds and Transitions timed to the audio) may not play back properly in sync if the slideshow is created on one computer and played-back on another; the durations of Builds and Transitions are dependent on the processor speed of the playback computer. SO be sure to check your synchronization on the playback computer! You may need to make some adjustments.
2) It has been reported in numerous threads in this Forum that Synchronizations also frequently fail when exported to other applications - especially when running OS 10.5.
3) Synchronization also fails if the slideshow is played back as a hyperlink. I've found that slideshows will playback just fine if a "stand-alone" Keynote presentation. If linked to others via hyperlinks, however, you will have to trigger all Builds and Transitions yourself.
All of these are known problems with Keynote and it's lamented implementation of audio. -
HT1414 Display does not go into landscape mode
Help My iphone 5 display does not go into landscape mode and the rotation lock is not on . I done reinstalling the lates versionof iOS and restore my back up and restart my phone it dosen't work. My phone was work few days ago after updating some apps it doesn't work in landscape mode for photo, music, vidoes,Safari, calculator and Calander.
Restore it to factory default and do not restore from your backup; test it out again...if issue presists their may be a hardware failure with the device that is preventing this7
-
Qosmio X500-014 PQX33C-01400N display does not wake on reboot
Recently my Qosmio X500-014 PQX33C-01400N display does not wake on reboot. I can see the the HDD status light working but I don't see the BIOS boot process or the Windows login. It's just blank. I know it boots Windows as I hear the chime and the webcam lights up waiting for face recognition.
I can reboot and plug in an external display and see the whole boot process and it works, but when I log in, Windows does not detect the laptop display.
For the laptop display to work. I reboot and wait until I see the webcam lightup which I assume means Windows is already in login prompt. I close the built in LCD display down and wait for the laptop to go to sleep mode. Once in sleep mode, I prop up the screen and it awakes like normal. I now don't shut down my laptop because of this. I just close down the screen and put it on sleep so I can easily get to it by simply waking it up.
Is this a hardware problem? BIOS problem? display adapter problem? I've never seen this problem in any forum.
Any advice would help. Thanks!As that's a Canadian model, you'll want to check their support site.
I'm not a tech support agent, but I doubt it's a driver issue because it's manifesting pre-Windows. Try checking for any relevant BIOS settings.
- Peter -
Installed Premiere Pro CS4 but video display does not work?
I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
RonI would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2 -
I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work
Hi Timia,
If you are using Safari as a web browser :-
Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
If you are using Google Chrome as the web browser :-
Open Google Chrome.
In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
In the "Search" section, select Google from the drop-down menu.
Let me know if you still experience any issue.
Regards,
Aadesh -
Help needed Displaying ALV Secondary list without using oops concept
Hi Experts
Help needed Displaying ALV Secondary list without using oops concept.
its urgent
regds
rajasekharhi chk this code
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*& Form validate
text
--> p1 text
<-- p2 text
FORM VALIDATE .
SELECT SINGLE VBELN
FROM VBAP
INTO V_VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM. " validate
*& Form get_details
text
--> p1 text
<-- p2 text
FORM GET_DETAILS .
SELECT VBELN
POSNR
MATNR
FROM VBAP
INTO TABLE IT_VBAP
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM. " get_details
*& Form fieldcat
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " fieldcat
*& Form LAYOUT
text
--> p1 text
<-- p2 text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM. " LAYOUT
*& Form VARIANT
text
--> p1 text
<-- p2 text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM. " VARIANT
*& Form SAVE
text
--> p1 text
<-- p2 text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM. " SAVE
*& Form EVENTS
text
--> p1 text
<-- p2 text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM. "TOP_OF_PAGE
*& Form ALV_DISPLAY
text
--> p1 text
<-- p2 text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = PF_STATUS
I_CALLBACK_USER_COMMAND = USER_COMMAND
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = G_SAVE
IS_VARIANT = G_VARIANT
IT_EVENTS = G_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBAP
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form SET_PF_STATUS
text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50651_PFSTATUS' EXCLUDING EXTAB.
ENDFORM. "SET_PF_STATUS
*& Form SET_USER_COMMAND
text
FORM SET_USER_COMMAND USING R_UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'DC'.
READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
SELECT SINGLE MTART
FROM MARA
INTO V_MTART
WHERE MATNR = IT_VBAP-MATNR.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
ELSE.
WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
WRITE :/ 'MATERIAL TYPE :' , V_MTART.
ENDIF.
ENDIF.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'CLOSE'.
CALL TRANSACTION 'SE38'.
ENDCASE.
REPORT Z_ALV_INTERACTIVE MESSAGE-ID ZMSG_50651
LINE-SIZE 100
LINE-COUNT 60
NO STANDARD PAGE HEADING.
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*& Form validate
text
--> p1 text
<-- p2 text
FORM VALIDATE .
SELECT SINGLE VBELN
FROM VBAP
INTO V_VBELN
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM. " validate
*& Form get_details
text
--> p1 text
<-- p2 text
FORM GET_DETAILS .
SELECT VBELN
POSNR
MATNR
FROM VBAP
INTO TABLE IT_VBAP
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM. " get_details
*& Form fieldcat
text
--> p1 text
<-- p2 text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " fieldcat
*& Form LAYOUT
text
--> p1 text
<-- p2 text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM. " LAYOUT
*& Form VARIANT
text
--> p1 text
<-- p2 text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM. " VARIANT
*& Form SAVE
text
--> p1 text
<-- p2 text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM. " SAVE
*& Form EVENTS
text
--> p1 text
<-- p2 text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM. " EVENTS
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM. "TOP_OF_PAGE
*& Form ALV_DISPLAY
text
--> p1 text
<-- p2 text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = PF_STATUS
I_CALLBACK_USER_COMMAND = USER_COMMAND
I_STRUCTURE_NAME =
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = G_SAVE
IS_VARIANT = G_VARIANT
IT_EVENTS = G_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBAP
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form SET_PF_STATUS
text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
ENDFORM. "SET_PF_STATUS
*& Form SET_USER_COMMAND
text
FORM SET_USER_COMMAND USING R_UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'DC'.
READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
IF SY-SUBRC = 0.
SELECT SINGLE MTART
FROM MARA
INTO V_MTART
WHERE MATNR = IT_VBAP-MATNR.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
ELSE.
WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
WRITE :/ 'MATERIAL TYPE :' , V_MTART.
SUBMIT SLIS_DUMMY WITH P_MATNR EQ IT_VBAP-MATNR
WITH P_MTART EQ V_MTART.
ENDIF.
ENDIF.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'CLOSE'.
CALL TRANSACTION 'SE38'.
ENDCASE.
plz reward if useful -
Mac Mini + A1038 Cinema Display does not work
Hi,
I have a 2009 model Mac Mini with mini-dvi and mini-display port's on the rear. I can connect any of my DVI based monitors to the mac mini using either the mini-dvi to dvi cable or the mini-displayport to dvi cable. All monitors except for the A1038 model Apple Cinema Display.
The cinema display works with 3 other computers with DVI ports, turns right on and is detected right away. When plugged into the mini it does nothing. Sometimes I can get it to work with the mini-dvi to dvi adapter but that is sporadic.
This is the same behavior with a 2009 model mac book pro and macbook. Using the mini-displayport to dvi cable the cinema display does not work but 3 other monitors do.
So my question is, why does apple hardware only work with non-apple hardware?Is the A1038 the old, plastic Cinema Display that doesn't have a power cord or power supply? It only has a video cable with the special ADC on it? If that's the case, it needs this to run from a newer Mac:
http://store.apple.com/us/product/M8661LL/B -
I have restored my new phone from I cloud but when I connect to my PC to put some music on it asks for set up as new phone or back up from a date from iTunes that is too old. Help it's doing my head in
Select setup as "New", the next screen should prompt you to rename your phone. Just name it what you already have it named. After that, you should be able to sync and all of your data & settings will still be exactly as you've already set them up on your phone. The message is more threatening than what really happens.
Maybe you are looking for
-
PCI-E Audio Sounds Terrible?
For years I have been using an X-Fi Platinum PCI card and have been very happy with it. This past August it died and I decided to replace it, and do away with my SLI rig. I purchased an EVGA GTX 760 4G FTW video card and a Recon 3D Fatality Champion
-
Hi all, I have developed a report whose output is directed to email. The problem is the output is sent as an attachment to emil. I want the report output to be sent in body of email rather than as an attachment. Thanx in advance Murthy
-
Opening Color 1.5 with 1.0
Is it possible to open and change an apple color session that was done in 1.5 with 1.0?
-
I can already get all of the "Identity" object attributes, but how does one get the "Connection" object attributes? Specifically, I would like to get the poll input/output lengths so I can set up an I/O connection. It looks like SimpleWho can get th
-
Hi all wondering if you could help me. I am trying to visit one website through safari and it tells me that there is a runtime error and wont open it. Got a yellow and red screen. But when I turn off my wi-fi on the iphone then it will open. turn my