HELP. my firewire ports do not work!! HElp please..
This is the problem:
after bus reset.
Jun 10 16:49:25 iMac-G5 kernel[0]: FireWire (OHCI) Apple ID 52 built-in: no valid selfIDs for more than 2 minutes after bus reset.
Jun 10 16:52:37 iMac-G5 kernel[0]: FireWire (OHCI) Apple ID 52 built-in: no valid selfIDs for more than 2 minutes after bus reset.
Jun 10 16:55:49 iMac-G5 kernel[0]: FireWire (OHCI) Apple ID 52 built-in: no valid selfIDs for more than 2 minutes after bus reset.
Jun 10 16:59:01 iMac-G5 kernel[0]: FireWire (OHCI) Apple ID 52 built-in: no valid selfIDs for more than 2 minutes after bus reset.
Jun 10 17:02:13 iMac-G5 kernel[0]: FireWire (OHCI) Apple ID 52 built-in: no valid selfIDs for more than 2 minutes after bus reset.
There is someone who knows how to solve the problem?
imac G5 Mac OS X (10.4.6) 1Gb Ram
You are posting in the iMac Intel Core Duo Discussions. Our Macs are different than yours is. Post to the G5Discussions and perhaps there is someone there to help.
Discussions- iMac G5
Similar Messages
-
IMac firewire port is not working
iMac firewire port is not working
Hi everybody, Happy New Year.
I am a 72 years old semi-newbie in video editing, because Iedit only 1 or may be 2 movies a year since 2007 and I have only very little computer knowledge.
I received a new 27” iMac as a birthday gift 14 months ago. About 10 months ago, with help, I successfully use the Migration Assistant to transfer some datas from my old power G4 to the iMac including two Final Cut Express projects. I had one project successfully done; burned to DVD and I save it with Print To Video. Last week, I have my second project done, I burned the sequences into DVD but unable to do a Print To Videodue to the iMac is not communicating with my Sony camcorders DCR VX1000, this is the same camcorder I used on the last job which was working a couple of months ago.As a result, I try to switch the Easy Setup with different Format and different Use; I refresh the Canvas window; I did a Mix down; move the Screen Saver to NEVER as well as the Energy Saver set to NEVER SLEEP. I also trashed the preferences (plist) folders; run the Utility repair, I replaced the firewire cable (4 pines – 9 pines 800), but nothing work. Up to this point, I think that there is no signal from the firewire port to the camcorder because I understand when the sequences is ready, the firewire is connected between the computer and the recording camcorder, the Print to Video is activated, then the word DV- IN should be seen on the recording deck screen. This time, I don’tread such words on the recording screen. Therefore, I think there’s no out going signal from the iMac to the recording camcorder and the iMac is not receiving signal from the recording camcorder. At this point, I try to connect my iMac to the power G4 to see if I can do some data transfer. Follow the procedures, I hook up the data transfer cable between the G4 and the iMac, I can the fireswire icon moving on the G4 screen but no indication on the iMac screen (there should be some indications in the source bar), this shows me the iMac did not recognize the G4 which worked on previous data transfer. It looks to me the firewire port on my iMac is dead. What has gone wrong? Could I accidentally disabled the firewire port by some magic keystroke? (i.e. accidentally fat finger some thing to make it stop working? Oh, by the way, during the playing around, went to the Final Cut tool bar, I click the View >Video Out > Digital Cinema Desktop Preview – Main, the result was a black screen and the esc key was my rescuer - LUCKY LUCKY! Are there any other trouble-shooting techniques to apply before bringing to shop? Please help!
Sorry for such a long statement, forgive me for unable to make it shorter. Thank you for your patience. Thanks to all the folks in this board for being so helpful.
p.s.Not sounding good.
If the system Profiler does not see it then there is a basic communication problem between camera and the Mac.
I'm thinking the Firewire port is the culprit as some 800 ports were faulty.
I'd suggest taking the Mac, cable and camera to your nearest Authorized Apple Service Centre and get them to diagnose the issue. eg. let them try to connect the two devices.
Right (control)click the Sequence icon in the Browser and select Item Properties, do the same for a clip.
You can also post screen shots for the Properties.
Al -
PavillionG7-2315nr windows 7(64 bit) USB serial control or usb ports are not working. Please help!
Hi I downgraded the laptop from windows 8 to windows 7 64 bit. Two of my USB ports are not working and cant find the right drivers for it. Can you please direct me, where I can download and update the drivers? Thanks in advance.
ShaweHi:
Download and instal both of these drivers and reboot.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405...
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405... -
Firewire 800 port does not work on my iMac, mid 2010 version.
If i plug in an external disk with external power it does not work. Sometimes the disk are recognized, but then it says its half the size it really is.
On small disks without external power it works.
I have tried 6 different LaCie disks with firewire 800 - all works on my macbook pro.
I have tried 2 differne western disks with firewire 800 - all works on my macbook pro.
All disks works as they should with USB.
Is it possible to reset the Firewire port?
If so, please send me a LINK. This support pages are **** to find correct answers…While you can't reset the FW port on it's own you can do a number of different resets including SMC & PRAM resets, you can also restart in Safe Mode which will clear some caches. It's possible one has become corrupt. Try these first and sff i you have any luck. Make sure ALL peripherals except the keyboard and mouse are unplugged when doing the resets. Also it is not a bad idea to do each reset 2-3x to ensure it's worked.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
My Firewire port is not working: Is that a Hardware or Software issue? any suggestions?
Greetings Everybody,
I bought this Imac to use it only with audio applications and now I can't use my UAD -2 Duo Satellite because MAC OS tells me that "
No FireWire ports were found" Does any know how to deal with this problem?
Thanks in advanceUSB and Firewire information:
http://support.apple.com/kb/HT1151?viewlocale=en_US
USB:
http://support.apple.com/kb/HT4049?viewlocale=en_US
Firewire Port failure:
http://www.wiebetech.com/whitepapers/FireWirePortFailures.php -
i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???
Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?
-
After installation, the mobo LAN port is not working? urgent, help ple
I just installed archlinux on my new i7 860 Asus p7p55d-e Deluxe build, but after the installation the LAN port is not working anymore. Before this, this Lan port works perfect in windows as well as in the arch installation. But after the installation, the led is orange and is blinking slowly, windows complains that the cable is not properly plugged, and even arch installation can't pull DHCP from it also.
Luckily, the mobo has another lan port, so I have to plug the cable out and to the second port, but I couldn't seem to be able to find anyway to enable the first Lan port anymore?
Have you seen anything like this, what possibly is the reason?
Thanks, any help will be appreciated.heleos, thanks for the reply, the first thing I check is BIOS. There is definitely nothing wrong with that, since I loaded the default one.
It is really strange, it seems no matter what I do, the 1st port which used to work, simple doesn't work, but the second one works fine.
But after some poking around with the "ethtool", it starts to work again. I have no idea what cause the disfunction and what magically heal it again.
Now I am really curious.
Last edited by mark.altern (2010-04-18 09:52:09) -
1 of my USB ports is not working. Help?
Suddenly one of my USB ports is not working. No matter what I plug into it, it doesn't work. Any help or ideas would be appreciated. Thanks.
Not in the one that's ailing, but it does in the other one. I've also plugged in an external USB hard drive and that doesn't connect. Also a mouse's USB dongle and that doesn't work in the ailing one, but is fine in the other one.
I've also tried ( a couple of times ) to simple reboot hoping that would jog it, but that doesn't seem to help either. -
Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
AlexMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.
I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple. -
I go to settings and switch "Automatic time" off and then back on. It works for a while, but then just goes back to being off. I've tried manually setting the time, but it just goes back to what it was before. If I send a text, it sends and then disapears. I can't see what I wrote! I went in to Apple to try and get it fixed, but they just restored my phone. It's still not working. Please help!
It's not hacker or a virus. You are experiencing what a number of users of iOS 5 are experiencing now - sluggish or less than perfect iPad performance. It seems that for some of us - memory management has gotten a little out of whack with this most recent update. Some of the basic troubleshooting steps that you can try are ....
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Close apps in the recents tray. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If you have Safari crashing issues - Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
None of these steps should be necessary as part of your daily routine - the iOS is supposed to handle all of this without any user input. Once again - for some of us - the iOS is letting us down.
Until Apple releases another update that resolves this issue for the "few" that suffer, keep these steps in mind and use them as needed. -
my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help
I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck
-
After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS
Did you talk to your carrier?
-
Hi, I have the iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!
Hello Glittergirl68,
Thank you for using Apple Support Communities.
It sounds like the function to reseize the Font in an iBook is not functioning properly.
I recommend a few things here. First close all the apps that are running in the background:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
When you have done that, restart the phone, and try again.
If the issue persists, I would follow these steps from the article:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
2. Check for app updates
You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
If prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
Note: Some apps may require a Wi-Fi connection to update.
3. Install another app from the App Store
If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
4. Restart the app
If the issue affects only a single app, try closing just that app.
5. Restart your device
Turn the device off and on.
6. Reinstall the affected app
Remove the app from your device and reinstall it:
Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
Tap the "x" in the corner of the app you want to delete.
Tap Delete to remove the app and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the app and then download it again.
All the very best,
Sterling -
I have purchased Production Premium CS4 Educational Version. Its serial number is not working. Please help...
If you recently purchased this then it is not likely to be a valid sale/purchase. Adobe does not sell older versions of their products and no one but Adobe provides student/teacher licensing. If you purchased this some time years ago and it is only recently that you find you are not able to reactivate it with the original serial number you can try contacting Adobe Support thru chat and see if they will be willing to work with you to resolve this.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Maybe you are looking for
-
My printer is Hp printer 932C it will only print in black and white not color
my printer is Hp printer 932C it will only print in black and white not color I got a new color cartage nothing still only printing in back and whit what can i do
-
How to show view based on condition
Hi, I have a scenario with login screen with a submit button and two views(success and error). Now I want to show a)a successful view if user enters a correct login name and password(which will be validated with static values in action method of subm
-
Java Bean Classes not showing up in drop down
Post Author: Cdog CA Forum: JAVA I've set the <JavaBeansClassPath>C:\Basement\vo</JavaBeansClassPath> and even added it the the ClassPath in the CRConfig.xml but nothing is showing up. Please advise me on what I am leaving out. Thank you,
-
How do i remove the rss subscribe link?
In iWeb, i have pictures posted on my page, i noticed that i have a rss link on there, the link goes to iPhoto. How do i remove that link?
-
Blinking Menubar Icons with iSync on
Hello! Since today, every time I start iSync and turn on the "Show Menubar Icon" option, all icons in the menubar diasappear and appear again in a neverending matter. I already erased the ~/Library/Preferences folder, but the problem is still present