Help !!! My forms from NT to Sun Solaris .. weird now

Hello,
I have brought my forms, originally developed on NT,
to UNIX Sun Solaris and every single fonts in the forms
have changed.
Is there a command to fix the fonts when bring to another
platform ?
Thanks so much in advance.
Thuy
null

T.P.
I am sorry but we don't deal with Oracle Forms.
Oracle Migration Workbench Team.
T.P (guest) wrote:
: Hi,
: I need to bring my forms60 originally developed on NT to
: Sun Solaris. Do I need to write a script and is the fonts
: going to be change?
: Thanks very much.
: Thuy
Oracle Technology Network
http://technet.oracle.com
null

Similar Messages

Convert Forms from NT to Sun Solaris

Can Any Body help me.
I Already have forms on NT, can i convert my forms to Sun Solaris system without full development again.
Thanks Alot for helping me

Move the .FMB file to sun solaris and compile it there to get the .FMX in sun.
Remember you should have sun solaris version of forms to compile the forms in that platform.
Code changes are not necessary provided you have no platform specific (NT) code written in your application.
null

Bring forms from NT to Sun Solaris

Hi,
I need to bring my forms60 originally developed on NT over
to Sun Solaris.
Do I need to write script and will all the fonts get effected
when go to another flatform ?
Thanks.
Thuy Pham
null

T.P.
I am sorry but we don't deal with Oracle Forms.
Oracle Migration Workbench Team.
T.P (guest) wrote:
: Hi,
: I need to bring my forms60 originally developed on NT to
: Sun Solaris. Do I need to write a script and is the fonts
: going to be change?
: Thanks very much.
: Thuy
Oracle Technology Network
http://technet.oracle.com
null

Bringing forms from NT to Sun Solaris

Hi,
I need to bring my forms60 originally developed on NT to
Sun Solaris. Do I need to write a script and is the fonts
going to be change?
Thanks very much.
Thuy
null

T.P.
I am sorry but we don't deal with Oracle Forms.
Oracle Migration Workbench Team.
T.P (guest) wrote:
: Hi,
: I need to bring my forms60 originally developed on NT to
: Sun Solaris. Do I need to write a script and is the fonts
: going to be change?
: Thanks very much.
: Thuy
Oracle Technology Network
http://technet.oracle.com
null

Help! Reverted from SL back to 10.5, now can't access old TM backups!

Hi folks,
So I decided to go back to Leopard after having too many problems with SL, particularly Office. I had to do an erase and install, and now when I try to restore from one of my pre-SL backups on TM, it says the entire TM drive is not accessible because it was created with a "Newer version of MAc OS X".
Is there anything I can do to get my Backup drive back as an accessible TM? Or can I only just copy the data over and format the backup to a new TM system?
Thanks!!
Daniel

djaffe wrote:
Hi folks,
So I decided to go back to Leopard after having too many problems with SL, particularly Office. I had to do an erase and install, and now when I try to restore from one of my pre-SL backups on TM, it says the entire TM drive is not accessible because it was created with a "Newer version of MAc OS X".
Most likely, your Leopard install disc was an older version than the one you were last running from, and you didn't install the "combo" update to get back to it.
But as Kiraly says, the best thing to do is a full restore of your entire system. See item #14 in the Frequently Asked Questions *User Tip* at the top of this forum.

How to restore a Oracle 9i Backup from Sun Solaris to Linux

Dear all,
I am using Oracle 9.0.1.
I make a Hot Backup which made by Rman in the Sun Solaris
and now, I want to restore this backup to the Linux machine.
But in the Linux machine,
the database name & path is different from that in Sun Solaris.
Does Oracle backup can restore across different platforms?
Does anyone know how to do write ryman statement to do this?
Thank for your kindly help.
Wilson

You cant resore backup in different platform.
/Jonas

Installation problem sun solaris 9 x86 on intel

I am trying to install sun solaris 9 x86 intel platform edition on my home pc hp e-vectra, configuration is PIII 800 Mhz, 10 GB HDD, 128 MB Ram, 17" color monitor, but it giving me following error :-
BooT Panic: trap type e, error 0 at 117499
Cr0: 800000011, cr1: 4, cr3: 17e000
Eax: 0, ebx: 7e2c, ecx: 0 edx: 16e350
Es: fffffffe, edi: 17dfe0, ebp: 7e40, esp: 7e20
Entering boot debugger:
Please help me, how can I install sun solaris 9 x86 on my HP E-Vectra PC.
Kalpesh Mehta

I had similar problems several months ago. I suspect this happens when host pc does not have floppy drive(or bios somehow misreports it) as it was in my case. Solaris 8 seems to work fine in the same environment, so I keep using it for now. Possible workaround might be to use DCA from Solaris 8: Installation of Sol9 started just fine after I entered Sol8 DCA and asked it to boot from Sol9 CD.
Hope this problem will be fixed in subsequent Sol9 releases.
Victor

I need your help to resolve my problem - SunSparc V890, Solaris 10

Hi all!
I made myself one big problem!
When I create one file named as dbora which is to be used to startup/shutdown automatically Oracle Database in Solaris 10, but I changed the owner of /etc from root to oracle users
#chown -R oracle:dba /etcAnd so that, I did not connect to the OS by remote session, telnet, ssh or ftp. Searched in Google, I found one action which was described like
Step 1: Boot in OS by CDRom in single mode users
ok>boot cdrom -sStep 2: Find the disk which contains the root
#formatStep 3: Mount this disk with making one temporary directory
#mkdir a
#mount /dev/******* /aStep 4: Re-change the owner of /etc
#chown -R root /a/etcStep 5: Unmount the disk
#unmoun /aStep 6: Reboot
#rebootPlease help me! This is the urgent problem because of my production database still at there
Thank you very much!

There is an exact same problem opened in another forum:
[http://www.unix.com/sun-solaris/69644-urgent-help.html|http://www.unix.com/sun-solaris/69644-urgent-help.html]
There are solutions posted on this thread, and by looking at the OP' name from that forum, this is you, isn't it?
Did the solutions posted there not work for you?
By following the solution there, you'll be able to boot up and connect to the server. However, there are files/directories owned by root with different group. After doing so, you might want to compare with another system and apply right group ownership to files/directories under /etc.

Invoking Web Forms from Sun Solaris Client PC

HI,
Can any one tell me whether we can invoke Web forms in Sun Solaris Client PC. If yes what is the way, either do we need to use the Netscape Navigator browser or some thing else to invoke the same.
Thanks in advance.
Regards,
S.Karthick

Please post Forms questions on the Forms discussion board.
You'll need a browser (netscape will do) and a JVM (you can use Sun's Java plug-in).
More info on how to setup this configuration is here:
http://otn.oracle.com/products/forms/pdf/forms_jdk141.pdf

Forms Server Not Running On Sun Solaris

Hi,
Now I am developing an developer 6i on sun solaris. I am using Oracle 8i, Forms server 6i, reports server 6i and OAS 4.0.8.2.
I install database on oracle user. And forms dan reports on other user. I start forms server on port 9000 by running the forms60_server script. But when I call the test.fmx from http://xxx/dev60html/runform
there is an error message can't connect to forms server on port 9000.
Can any body help me.
Regards
Yanto

The error message is FRM-902050.
When i look at form help there is no explanation for that error.
Regards
Yanto

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Migrate Oracle Apps 11.5.10.2 from Sun solaris to RHE Linux 32 bit.

We are migrating the Oracle Apps 11.5.10.2 from Solaris two node to Linux two node including the database Oracle 10.2.04 64 bit.
Since the applications only support 32 bit we are not able to store CM tier in a 64 bit Linux so with this considerations we are going with the below plan.
1. Install RHEL 5 as a 32 bit for two nodes ( One for DB/CM and FORMS/WEB)
2. Migrate the applications and DB from Solaris to Linux as the same node configuration that is
Node A:
Oracle DB 10.2.0.4 64 bit ( SUN oS 10 64bit) -> Oracle 10.2.0.5 32bit (RHEL 5 32 bit)
Oracle Apps CM 11.5.10.2 (SUN OS 10 64bit) -> Oracle apps CM 32 bit(RHEL 5 32 bit)
Node B:
Oracle apps 11.5.10.2 forms (sun OS 10) -> Oracle apps 11.5.10.2 forms ( RHEL 5 32bit)
Oracle apps WEB 11.5.10.2 (SUN OS 10) -> Oracle apps WEB 11.5.10.2 ( RHEL 5 32 bit).
Question : 1. Did you see any snag on this kind of migration
2. Any documentation to migrate the Oracle APPS 11i 10.2.0.4-64 bit database from Sun Solaris to oracle apps 11i 10.2.0.5-32 bit on Linux

Hi,
1. Did you see any snag on this kind of migrationWhy would you downgrade the db from 64 bit to 32 bit. As 32 Bit has lot of memory limitations.
You could keep the database on 64 bit for linux too.
2. Any documentation to migrate the Oracle APPS 11i 10.2.0.4-64 bit database from Sun Solaris to oracle apps 11i 10.2.0.5-32 bit on Linux Please see
Note 238276.1 - Migrating to Linux with Oracle Applications Release 11i
Using Oracle Applications with a Split Configuration Database Tier on Oracle 10g Release 2 [ID 369693.1]
10g Export/Import Process for Oracle Applications Release 11i [ID 331221.1]
10g Release 2 Export/Import Process for Oracle Applications Release 11i [ID 362205.1]
Notice to Oracle E-Business Suite Customers: Correction to Export/Import Notes [ID 1055539.1]
EBS 11i Export/Import Fails On Admsc1020.sql Due To Missing Catmgdidcode.sql [ID 804665.1]
Thanks
Edited by: EBSDBA on Oct 25, 2011 5:30 PM

Application Migration from HP-UNIX to SUN Solaris

Hi Gurus,
Need help on the application migration from HP-UNIX to Sun Solaris . Copied the filesystems APPL_TOP, OA_HTML, OA_JAVA, COMMON_TOP/util and COMMON_TOP/_pages from SOURCE( HP) to TARGET SUN-solaris as per 238276.1
Now trying to clone Autoconfig XML context file on the TARGET System
perl adclonectx.pl migrate java=\opt\java1.4 \
contextfile=\ul01\app\applmgr\lasrx\admin\LASRX_fiapd4.xml
Error: source context file ul01appapplmgrlasrxadminLASRX_fiapd4.xml does not exist.
Questions:
======
1. we still need to install jdk in the TARGET or copy the file system from source(HP) to target( Solaris) bring the JDK and how to check jdk on Solaris?
2. In clone autoconfig XML, contextfile=? Is the location of SOURCE or TARGER?
3. I think running above with root permission.
Please help somebody on this issue.
Thank You.

Hi Hussein,
I need your help on the Application migration from HP-UNIX to SUN Solaris. As per the note 238276.1 we dont copy $806_ORACLE_HOME for cross platform migration, Copied all the filesystem from SOURCE to TARGET but rename it because it suppose to create while installing Middle tier.
Issue:1
=====
When i start to set environment like below, i get the error and
. /ul01/app/applmgr/lasrx/APPSORA.env
ksh: /ul02/app/oracle/lasrx/8.0.6_new/LASRX_fiapd4.env: not found
I am trying to install Middle Tier Technology Stack on SUN server ( Migrating from HP-UNIX to SUN solaris)
Issue 2: ( Display error) while install Tech Stack
=====
./rapidwiz -techstack
Rapid Install Wizard is validating your file system......
>> Wizard requires the DISPLAY variable to be set.
>> Please set your DISPLAY variable and restart Rapid Install Wizard.
even i can not see
echo $DISPLAY because not set the environment.
Need your help and suggetions on this.
Thank You.

JavaMail from Sun Solaris

Ok, I am fairly new to Java. I am trying to send a simpole mail from our Sun Solaris box. With perl or shell I use the malix program. How do I get java to envoke the same program, or is it even possible. If not, is there a default SMPT mail program that comes with Sun Solaris that I can use as the name for the following code:
props.put("mail.smtp.host", smtpServer);
Session session = Session.getDefaultInstance(props, null);
Any help would be greatly appreciated.

What u can do is to envoke a class that uses props.put("mail.smtp.host", smtpServer);
here is the class file:
package com.classes.homepage;
import java.io.IOException;
import java.io.PrintStream;
* Class for sending mail to given email address.
* It is a wrapper of the sun.net.smtp.SmtpClient class which is not documented.
* This way, all public methods of this and the subordinated classes are accessible.
* <p>
* <p><b>Known Bugs:</b>
* @see #startMessage()
* @version $Revision: 1.4.1.3 $ of $Date: 2000/10/06 21:10:46Z $
* @author $Author: Garry Labana
public class testSendMail extends sun.net.smtp.SmtpClient
//++++++++++++++++++++++++++++++++++
// static
     /** SMTP mailhost: Default = "mailhost" */
     protected static String MAILHOST="mailhost";
     public static void setMailHost( String _sMailHost)
          MAILHOST = _sMailHost;
//++++++++++++++++++++++++++++++++++
// public
     * Constructor:
     * To create a new mail object with a connection to the MCBS default mailhost
     * which is by default read from the application properties (DbProperties + Ini files)
     * The respective property is called 'MAILHOST' with the default value
     * "mailhost".
     * @exception IOException indicates problems when establishing connection
     *                                    to the mailhost
     public testSendMail() throws IOException
          this( MAILHOST );
     * Constructor:
     * To create a new mail object with a connection to the specified mailhost.
     * @param sMailhost     the server name of the SMTP mailhost
     * @exception IOException indicates problems when establishing connection
     *                                    to the mailhost
     public testSendMail( String sMailHost ) throws IOException
          super( sMailHost );
     * To send the mai applying the specified parameters.
     * @param sFrom          the mail address of the sender
     * @param sTo          the mail address of the addressee
     * @param sCC          optional addressee for CC
     * @param sSubject     optional mail subject (title bar, ref.)
     * @param sMessage     the actual message. It can have multiple lines
     *                          using the line feed character '\n'.
     * @exception          IOException in case of problems when sending the mail
     public static void sendMail( String sFrom, String sTo, String sCC,
                                        String sSubject, String sMessage )
          throws IOException
          testSendMail rMail = new testSendMail();
          rMail.from( sFrom );
          rMail.to( sTo );
          PrintStream rMailOut = rMail.startMessage();
          // Important: no println but + "\n", as otherwise problems with Unix mail prog.
          // and Netscape
          rMailOut.print( "From: "+ sFrom +"\n" );
          rMailOut.print( "To: " + sTo + "\n" );
          if( sCC != null ) rMailOut.print( "CC: " + sCC + "\n" );
          rMailOut.print( "Subject: "+( sSubject == null ? "Message Content" : sSubject )+"\n" );
          // Important: line feed in front of message as otherwise 'Text:' will be
          // interpreted as token
          rMailOut.print("\n" + sMessage );
          rMail.closeServer();
     * issue the QUIT command to the SMTP server and close the connection.
     public void closeServer() throws IOException {
          super.closeServer();
     public void to(String s) throws IOException     {     super.to( s );     }
     public void from(String s) throws IOException     {     super.from( s );     }
     * This class implements the SMTP client. You can send a piece of mail by
     * creating a new SmtpClient, calling the "to" method to add destinations,
     * calling "from" to name the sender, calling startMessage to return a stream
     * to which you write the message (with RFC733 headers) and then you finally
     * close the Smtp Client.
     public PrintStream startMessage() throws IOException {
          return super.startMessage();
} // class testSendMail

Help !!! My forms from NT to Sun Solaris .. weird now

Similar Messages

Maybe you are looking for