Help my headphones have stopped working
I was watching a video done in flash. I opened up the menu trying to make it full screen. I went into the setting tab and hit the Microphone tab. Now all sounds comes out of the laptopn speakers and the headphones simply do not work.
I do not even think I clicked in the mircophone menu.
ChickInVici,
Having similar issue with iPad 2. No volume on Apps or Music (except when using headphones). Just started happening after months of no issues. Have reset/ restored with no solution. Can you provide more detail with your solution? I went to >settings>accessibility>voiceover.....but could not find headphones etc... what am I missing. Could you be more specific on what you changed to resolve your issue.
thanks
Similar Messages
-
IPhone headphones have stopped working in one ear.
iPhone 5 headphones have stopped working in one ear. I've tried it on multiple devices and they still won't work. Is there anything I can do?
If the headphones exhibit the same issue on multiple devices, the headset is the issue.
Everything that was included in the box with the iPhone is covered under the same 1yr warranty. Take them to Apple for evaluation and possible replacement. -
One of my headphone stopped working then the other one. From the question I was wondering if this matter could be resolved?
I've had Dell, HP, Gateway, IBM, Compaq, Lenova, and other computer manufacturer's send replacement drives to users as warranty replacements. They normally take your credit card number so they can charge you if you don't return the defective part by a certain date. I can't understand why Toshiba is so **bleep** about this. I don't blame you for not wanting to send in your laptop to have the hard drive replaced under warranty. Just get a Western Digital Scorpio Blue from Newegg, ZipZoomFly, or some other reputable online reseller and replace it yourself.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time. -
i need help!!!!!!
Do you get sound from the internal speakers? If you hold down the opt/alt key and click the speaker icon on the menu bar, what options do you have under 'Output Device'? Look into the headphone socket, can you see a red light?
-
Headphones have stopped working.
Suddenly I can't use my earbuds with my iPad. Have checked and they are fine with my iPod. Any suggestions? Could I have unwittingly changed some setting that turns off the headphone jack?
Do you get sound from the internal speakers? If you hold down the opt/alt key and click the speaker icon on the menu bar, what options do you have under 'Output Device'? Look into the headphone socket, can you see a red light?
-
Hp Pavillion Laptop with Windows 8 - Speakers have stopped working but headphones do! Please Help!
Please someone help - the speakers on my laptop have stopped working all of a sudden! But the headphones do though there is a low buzzing sound when i use them.
When in control plan to look at the problem it tells me they are working.
Please help - laptop is only a few months old!
You will be my hero.
This question was solved.
View Solution.Hi,
Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Properties. Click the Driver tab and then click 'Update driver'. Select 'Browse my computer for driver software' and then select 'Let me pick from a list of device drivers on my computer'. Left click 'High Definition Audio Device' once to highlight it and then click the Next button to install it.
Has this made any difference?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Hi,
I have an iPod shuffle 4th generation and an iPod Nano 5th generation . The Nano wheel appears to have stopped working - I can't get it to play or anything. I've done the reset and it worked the first time, but now the only way I can get it to play anything is to shake it and go with the shuffle choices - I can't change volume, song, pause or turn it off.
So, I decided to start using the Shuffle which I was given as a present last year. I've plugged it into my laptop (running windows 8 and newest version of iTunes). It appears in iTunes on the left hand side, but when I click to sync (whether I tick sync all or choose artists) it says synched but has no music. It seems to not be linked to the music library - when I tick synch all songs, next to the "sync music" it says 0 songs?
Any help to fix either would be really appreciated - I'm without any music at the moment and I'm going away this weekend!
ThanksHi Bblairjones,
If you are having issues with your Nano and Shuffle, you may want to try the Troubleshooting Assistants on the following page:
Apple Support: iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Regards,
- Brenden -
FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. The message says "FaceTime (iMessage) Activation: Could not sign in. Please check your network connection and try again". My network is perfectly alright as I keep buying on the App Store. can u please help out???
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset. -
after running i disconnected my iphone headset. since then my iphone speakers have stopped working. i can still listen to music using headphones and the phone ringer still works but the speakers are silent. when i adjust the volume it indicates it is in "headphone" mode. Any idea how i can solve this problem ?
I have read in other threads with similar problems that cleaning the headphone jack/port seems to usually work. The simplest method is to rapidly plug/unplug the headphones a few times. See if that works.
-
My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume. I have been in system prefrences to check all the sound settings and everything is set properly. What do I need to do to fix this. Help!
Though I have doubts for success, you might try a SMC reset. It can do no harm. Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
http://support.apple.com/kb/HT3964
Ciao. -
I recently used the computer for I player over the TV, but when removing the external speakers the internal speaker appears to have stopped working and when going on to system preferences and sound I am only given the option of digital out put. Help
Do you see a red light shining in the headphone port?
-
I'm running Indesign CS5 & it appears my Adobe PDF presesets have stopped working. Can you help?
I'm running Indesign CS5 & it appears my Adobe PDF presesets have stopped working. Can you help?
It's under utilities in the window menu.
If the simple PDF works, that may indicate a problem with the file after all, but one way to to force the export to the foreground is to create a new Book (File > New > Book), then add the file that's giving you trouble to that book. (a Book is just a container format used to combine multiple .indd files into a single output)
From the Book panel flyout menu you can export to PDF and see what that does. Failure indicates a file problem, success a background task problem.
It's a little odd that you aren't getting an error message....
Anyway, if the problem is the file, try export in two halves. If both halves export, it's a system resources problem and not much you can do other than attempt to see what is using all the memory (probably some large complex vector object, or many vector objects) or just do the export in chunks that work and combine them in Acrobat Pro. If one half fails, try exporting half fo the failing half at a time. Keep dividing the failing half until you isolate a page with the problem. -
Headphone output stopped working (snd-hda, Dell XPS 13)
Update: I got it working! See my second post; I will leave this here as a reference for those with the same problem.
My headphone output stopped working, and my integrated microphone also stopped working. The speakers work fine, though.
AFAIK, I didn't do anything, and am quite baffled as to why this is. It's worked fine for half a year.
I have a Dell XPS 13; it came installed with Ubuntu, I booted that, where it *does* work (just to eliminate hardware problems).
I'm running 3.16.4-1; I also downgraded to 3.16.3, which didn't help.
I'm testing with speaker-test and mplayer -ao alsa; I normally use PulseAudio, but eliminating that for testing seemed like a sane thing to do. It doesn't work either way.
I also downloaded the hda_analyzer, that has a lot of options, but I'm not sure what most of them mean...
The closest I've been able to get at the problem is this:
[~]% alsactl monitor
card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
This is an insert & remove of my headphone jack; ALSA does detect something it seems. It's listed as "Headphone Mic Jack", is this right?
Any hints would be greatly appreciated!
More info:
[~]% cat /etc/modprobe.d/alsa-base.conf
options snd-hda-intel enable=0,1
options snd-hda-intel model=dell-headset-multi,dell-headset-multi
This is required to get this to work in the first place, and always has worked; I tried some other options, to no avail. the enable=0,1 is to disable the HDMI output (disabling this has no effect either).
$ cat /sys/module/snd_hda_intel/parameters/model
dell-headset-multi,dell-headset-multi,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), +(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
To verify these options are actually being used
$ id -Gn
martin wheel video audio vboxusers nfs
I'm in the audio group, not sure if this is required, but can't hurt.
[~]# cat /etc/asound.conf
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
Nothing special ... pulseaudio is more or less mandatory these days. ~/.asoundrc doesn't exist.
Some misc. info:
$ grep Codec /proc/asound/card*/codec*
Codec: Realtek ALC3661
[~]% lsmod | grep ^snd
snd_usb_audio 135316 0
snd_usbmidi_lib 27484 1 snd_usb_audio
snd_rawmidi 26806 1 snd_usbmidi_lib
snd_seq_device 13132 1 snd_rawmidi
snd_hda_codec_realtek 67127 1
snd_hda_codec_generic 63126 1 snd_hda_codec_realtek
snd_hda_intel 26327 3
snd_hda_controller 26727 1 snd_hda_intel
snd_hda_codec 108552 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 17244 2 snd_usb_audio,snd_hda_codec
snd_pcm 88487 4 snd_usb_audio,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 26614 1 snd_pcm
snd 73436 17 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
$ lspci -vv
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
Subsystem: Dell Device 060a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f0510000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: snd_hda_intel
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
Subsystem: Dell Device 060a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 59
Region 0: Memory at f0514000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c2879fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c287a000-0x00000000dceeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dceef000-0x00000000dcf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. XPS13 9333/0GFTRT, BIOS A02 12/11/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xc287a max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21f400000-0x21f5fffff]
[ 0.000000] [mem 0x21f400000-0x21f5fffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21f3fffff]
[ 0.000000] [mem 0x21c000000-0x21f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc2879fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc27fffff] page 2M
[ 0.000000] [mem 0xc2800000-0xc2879fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3796a000-0x37cacfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000DCFFE170 0000BC (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 0x00000000DCFFB000 00010C (v05 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: DSDT 0x00000000DCFE6000 010557 (v02 DELL HSW-LPT 00000000 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000DCF9C000 000040
[ 0.000000] ACPI: ASF! 0x00000000DCFFD000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: HPET 0x00000000DCFFA000 000038 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: LPIT 0x00000000DCFF9000 000094 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: APIC 0x00000000DCFF8000 000098 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: MCFG 0x00000000DCFF7000 00003C (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DCFE5000 000228 (v01 DELL sensrhub 00000000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFE2000 002028 (v01 DELL PtidDevc 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFE1000 000539 (v01 DELL Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFE0000 000AD8 (v01 DELL CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DCFDC000 003641 (v01 DELL SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: UEFI 0x00000000DCFDB000 000042 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: POAT 0x00000000DCF77000 000055 (v03 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: BATB 0x00000000DCFDA000 000046 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FPDT 0x00000000DCFD9000 000064 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SLIC 0x00000000DCFD8000 000176 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DCFD7000 0002A6 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DCFD6000 0005C1 (v01 DELL IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: CSRT 0x00000000DCFD4000 0000C4 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21f5fffff]
[ 0.000000] NODE_DATA [mem 0x21f5f9000-0x21f5fdfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217200000-ffff88021ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xc2879fff]
[ 0.000000] node 0: [mem 0x100000000-0x21f5fffff]
[ 0.000000] On node 0 totalpages: 1973782
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12386 pages used for memmap
[ 0.000000] DMA32 zone: 792698 pages, LIFO batch:31
[ 0.000000] Normal zone: 18392 pages used for memmap
[ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc287a000-0xdceeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdceef000-0xdcf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcf9f000-0xdcffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdcfff000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021f200000 s86784 r8192 d23808 u262144
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1942919
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7688084K/7895128K available (5336K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 207044K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31981568 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.295 MHz processor
[ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.11 BogoMIPS (lpj=7980983)
[ 0.000042] pid_max: default: 32768 minimum: 301
[ 0.000050] ACPI: Core revision 20140424
[ 0.020000] ACPI: All ACPI Tables successfully acquired
[ 0.020260] Security Framework initialized
[ 0.020267] Yama: becoming mindful.
[ 0.020937] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.022978] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.023836] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.023849] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024116] Initializing cgroup subsys memory
[ 0.024140] Initializing cgroup subsys devices
[ 0.024147] Initializing cgroup subsys freezer
[ 0.024150] Initializing cgroup subsys net_cls
[ 0.024155] Initializing cgroup subsys blkio
[ 0.024183] CPU: Physical Processor ID: 0
[ 0.024184] CPU: Processor Core ID: 0
[ 0.024189] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.025376] mce: CPU supports 7 MCE banks
[ 0.025391] CPU0: Thermal monitoring enabled (TM1)
[ 0.025404] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
[ 0.025524] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.026475] ftrace: allocating 20445 entries in 80 pages
[ 0.038058] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071090] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
[ 0.071098] TSC deadline timer enabled
[ 0.071124] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.071149] ... version: 3
[ 0.071150] ... bit width: 48
[ 0.071151] ... generic registers: 4
[ 0.071152] ... value mask: 0000ffffffffffff
[ 0.071154] ... max period: 0000ffffffffffff
[ 0.071155] ... fixed-purpose events: 3
[ 0.071156] ... event mask: 000000070000000f
[ 0.097907] x86: Booting SMP configuration:
[ 0.097909] .... node #0, CPUs: #1
[ 0.112630] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.119293] #2 #3
[ 0.154938] x86: Booted up 1 node, 4 CPUs
[ 0.154942] smpboot: Total of 4 processors activated (19162.45 BogoMIPS)
[ 0.160676] devtmpfs: initialized
[ 0.163608] PM: Registering ACPI NVS region [mem 0xdceef000-0xdcf9efff] (720896 bytes)
[ 0.164642] pinctrl core: initialized pinctrl subsystem
[ 0.164688] RTC time: 22:42:27, date: 10/21/14
[ 0.164750] NET: Registered protocol family 16
[ 0.164884] cpuidle: using governor ladder
[ 0.164887] cpuidle: using governor menu
[ 0.164916] ACPI: bus type PCI registered
[ 0.164918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.165012] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.165014] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.165118] PCI: Using configuration type 1 for base access
[ 0.165125] dmi type 0xB1 record - unknown flag
[ 0.177572] ACPI: Added _OSI(Module Device)
[ 0.177575] ACPI: Added _OSI(Processor Device)
[ 0.177577] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.177578] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183007] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.194850] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.207326] ACPI: Dynamic OEM Table Load:
[ 0.207339] ACPI: SSDT 0xFFFF880213EE7000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.220827] ACPI: Dynamic OEM Table Load:
[ 0.220838] ACPI: SSDT 0xFFFF880213F81000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.237345] ACPI: Dynamic OEM Table Load:
[ 0.237354] ACPI: SSDT 0xFFFF880213F56200 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.255255] ACPI: Interpreter enabled
[ 0.255267] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.255275] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.255298] ACPI: (supports S0 S3 S4 S5)
[ 0.255300] ACPI: Using IOAPIC for interrupt routing
[ 0.255336] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.268419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.268426] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.268573] \_SB_.PCI0:_OSC invalid UUID
[ 0.268575] _OSC request data:1 1f 0
[ 0.268579] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.269580] PCI host bridge to bus 0000:00
[ 0.269584] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.269586] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.269588] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.269590] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.269592] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[ 0.269601] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.269803] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.269817] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.269826] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.269831] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.270019] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.270029] pci 0000:00:03.0: reg 0x10: [mem 0xf0510000-0xf0513fff 64bit]
[ 0.270244] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.270263] pci 0000:00:14.0: reg 0x10: [mem 0xf0500000-0xf050ffff 64bit]
[ 0.270324] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.270459] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.270505] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.270526] pci 0000:00:16.0: reg 0x10: [mem 0xf0519000-0xf051901f 64bit]
[ 0.270598] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.270790] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.270806] pci 0000:00:1b.0: reg 0x10: [mem 0xf0514000-0xf0517fff 64bit]
[ 0.270876] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271011] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.271060] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.271140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.271279] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.271327] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.271410] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.271549] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.271602] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.271624] pci 0000:00:1d.0: reg 0x10: [mem 0xf051d000-0xf051d3ff]
[ 0.271716] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.271867] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.271914] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.272193] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.272209] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.272217] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.272225] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.272232] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.272240] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.272247] pci 0000:00:1f.2: reg 0x24: [mem 0xf051c000-0xf051c7ff]
[ 0.272285] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.272451] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.272466] pci 0000:00:1f.3: reg 0x10: [mem 0xf0518000-0xf05180ff 64bit]
[ 0.272486] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.272737] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.272853] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[ 0.272899] pci 0000:02:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
[ 0.273097] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.273145] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.277341] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.277347] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.294607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.294666] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.294723] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.294778] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.294832] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.294886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.294940] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.294995] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.295346] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.295416] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.295555] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.295559] vgaarb: loaded
[ 0.295560] vgaarb: bridge control possible 0000:00:02.0
[ 0.295603] PCI: Using ACPI for IRQ routing
[ 0.297024] PCI: pci_cache_line_size set to 64 bytes
[ 0.297085] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.297087] e820: reserve RAM buffer [mem 0xc287a000-0xc3ffffff]
[ 0.297088] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[ 0.297209] NetLabel: Initializing
[ 0.297211] NetLabel: domain hash size = 128
[ 0.297212] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.297225] NetLabel: unlabeled traffic allowed by default
[ 0.297250] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.297256] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.299294] Switched to clocksource hpet
[ 0.305097] pnp: PnP ACPI init
[ 0.305113] ACPI: bus type PNP registered
[ 0.305253] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.305256] system 00:00: [io 0xffff] has been reserved
[ 0.305259] system 00:00: [io 0xffff] has been reserved
[ 0.305262] system 00:00: [io 0xffff] has been reserved
[ 0.305265] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.305267] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.305270] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305325] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.305378] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.305381] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.305426] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.305459] pnp 00:04: Plug and Play ACPI device, IDs SYN0608 PNP0f03 (active)
[ 0.305612] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.305614] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.305617] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.305619] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.305621] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.305623] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.305625] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.305627] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.305630] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.305632] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.305634] system 00:05: [mem 0xdfa10000-0xdfa1ffff] has been reserved
[ 0.305637] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305958] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
[ 0.305961] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.305971] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.305974] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.306696] pnp: PnP ACPI: found 7 devices
[ 0.306698] ACPI: bus type PNP unregistered
[ 0.313588] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.313602] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.313608] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
[ 0.313617] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.313620] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.313622] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.313624] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[ 0.313626] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
[ 0.313661] NET: Registered protocol family 2
[ 0.313895] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.314065] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.314196] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.314216] TCP: reno registered
[ 0.314229] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.314260] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.314329] NET: Registered protocol family 1
[ 0.314345] pci 0000:00:02.0: Boot video device
[ 0.314427] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.314429] pci 0000:00:14.0: PCI INT A: no GSI
[ 0.314520] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.314702] PCI: CLS 64 bytes, default 64
[ 0.314746] Unpacking initramfs...
[ 0.389760] Freeing initrd memory: 3340K (ffff88003796a000 - ffff880037cad000)
[ 0.389768] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.389771] software IO TLB [mem 0xbe87a000-0xc287a000] (64MB) mapped at [ffff8800be87a000-ffff8800c2879fff]
[ 0.389991] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.390043] Scanning for low memory corruption every 60 seconds
[ 0.390383] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.390776] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.392315] zbud: loaded
[ 0.392526] VFS: Disk quotas dquot_6.5.2
[ 0.392564] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.392709] msgmni has been set to 15022
[ 0.392776] Key type big_key registered
[ 0.392952] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.393009] io scheduler noop registered
[ 0.393014] io scheduler deadline registered
[ 0.393072] io scheduler cfq registered (default)
[ 0.393422] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.393440] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.393482] intel_idle: MWAIT substates: 0x11142120
[ 0.393484] intel_idle: v0.4 model 0x45
[ 0.393485] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.393772] GHES: HEST is not enabled!
[ 0.393860] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.394367] Linux agpgart interface v0.103
[ 0.394421] rtc_cmos 00:01: RTC can wake from S4
[ 0.394566] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.394596] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.394611] Intel P-state driver initializing.
[ 0.394625] Intel pstate controlling: cpu 0
[ 0.394647] Intel pstate controlling: cpu 1
[ 0.394663] Intel pstate controlling: cpu 2
[ 0.394684] Intel pstate controlling: cpu 3
[ 0.394756] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.395139] TCP: cubic registered
[ 0.395367] NET: Registered protocol family 10
[ 0.395811] NET: Registered protocol family 17
[ 0.396487] registered taskstats version 1
[ 0.397305] Magic number: 2:622:755
[ 0.397469] rtc_cmos 00:01: setting system clock to 2014-10-21 22:42:27 UTC (1413931347)
[ 0.397659] PM: Hibernation image not present or could not be loaded.
[ 0.399550] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 0.399554] Write protecting the kernel read-only data: 8192k
[ 0.403618] Freeing unused kernel memory: 796K (ffff880001539000 - ffff880001600000)
[ 0.404603] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 0.411279] random: systemd-tmpfile urandom read with 4 bits of entropy available
[ 0.412549] systemd-udevd[57]: starting version 216
[ 0.429661] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.430313] sdhci: Secure Digital Host Controller Interface driver
[ 0.430315] sdhci: Copyright(c) Pierre Ossman
[ 0.435942] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.436007] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.441502] ACPI: bus type USB registered
[ 0.441544] usbcore: registered new interface driver usbfs
[ 0.441562] usbcore: registered new interface driver hub
[ 0.441712] usbcore: registered new device driver usb
[ 0.442370] SCSI subsystem initialized
[ 0.442606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.442897] ehci-pci: EHCI PCI platform driver
[ 0.443091] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.443106] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.443121] ehci-pci 0000:00:1d.0: debug port 2
[ 0.444256] libata version 3.00 loaded.
[ 0.447021] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.447046] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf051d000
[ 0.456197] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.456468] hub 1-0:1.0: USB hub found
[ 0.456636] hub 1-0:1.0: 2 ports detected
[ 0.456998] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 0.457003] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 0.457028] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.457038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.457132] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.457158] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 0.457437] hub 2-0:1.0: USB hub found
[ 0.457454] hub 2-0:1.0: 9 ports detected
[ 0.460686] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.460692] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.460861] hub 3-0:1.0: USB hub found
[ 0.460871] hub 3-0:1.0: 4 ports detected
[ 0.461773] ahci 0000:00:1f.2: version 3.0
[ 0.461915] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
[ 0.471676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.472802] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x4 impl SATA mode
[ 0.472807] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.473307] scsi0 : ahci
[ 0.473445] scsi1 : ahci
[ 0.473555] scsi2 : ahci
[ 0.473668] scsi3 : ahci
[ 0.473715] ata1: DUMMY
[ 0.473717] ata2: DUMMY
[ 0.473719] ata3: SATA max UDMA/133 abar m2048@0xf051c000 port 0xf051c200 irq 57
[ 0.473721] ata4: DUMMY
[ 0.763125] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.793107] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.793458] ata3.00: ATA-8: LITEONIT LMT-256M6M mSATA 256GB, DM8110F, max UDMA/133
[ 0.793461] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 0.794069] ata3.00: configured for UDMA/133
[ 0.794234] scsi 2:0:0:0: Direct-Access ATA LITEONIT LMT-256 10F PQ: 0 ANSI: 5
[ 0.798767] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 0.798902] sd 2:0:0:0: [sda] Write Protect is off
[ 0.798906] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.798943] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.799393] sda: sda3 sda4
[ 0.799749] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.841216] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 0.887143] hub 1-1:1.0: USB hub found
[ 0.887202] hub 1-1:1.0: 8 ports detected
[ 0.946321] systemd[1]: Cannot add dependency job for unit nfs-server.target, ignoring: Unit nfs-server.target failed to load: No such file or directory.
[ 0.946348] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 0.960139] EXT4-fs (sda4): re-mounted. Opts: data=ordered,discard
[ 0.981520] FS-Cache: Loaded
[ 0.992070] RPC: Registered named UNIX socket transport module.
[ 0.992075] RPC: Registered udp transport module.
[ 0.992077] RPC: Registered tcp transport module.
[ 0.992079] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.004660] FS-Cache: Netfs 'nfs' registered for caching
[ 1.007058] Netfilter messages via NETLINK v0.30.
[ 1.008839] nf_tables: (c) 2007-2009 Patrick McHardy <[email protected]>
[ 1.023856] vboxdrv: Found 4 processor cores.
[ 1.024080] vboxdrv: fAsync=0 offMin=0x2c2 offMax=0x31e0
[ 1.024169] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 1.024172] vboxdrv: Successfully loaded version 4.3.18_OSE (interface 0x001a0008).
[ 1.046603] usb 2-3: new full-speed USB device number 2 using xhci_hcd
[ 1.322293] systemd-udevd[170]: starting version 216
[ 1.380209] usb 2-5: new high-speed USB device number 3 using xhci_hcd
[ 1.393592] tsc: Refined TSC clocksource calibration: 2394.460 MHz
[ 1.439202] systemd-journald[135]: Received request to flush runtime journal from PID 1
[ 1.471000] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.476250] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 1.510556] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.510560] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.510856] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.510860] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.516235] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.526161] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 1.526172] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.545038] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
[ 1.552395] cfg80211: Calling CRDA to update world regulatory domain
[ 1.576090] [drm] Initialized drm 1.1.0 20060810
[ 1.580291] random: nonblocking pool is initialized
[ 1.596486] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 1.596490] Copyright(c) 2003- 2014 Intel Corporation
[ 1.596517] snd_hda_intel: probe of 0000:00:03.0 failed with error -2
[ 1.596724] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 1.597671] iwlwifi 0000:02:00.0: irq 60 for MSI/MSI-X
[ 1.606282] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[ 1.622623] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 1.622630] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.622633] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 1.622636] sound hdaudioC0D0: mono: mono_out=0x0
[ 1.622639] sound hdaudioC0D0: inputs:
[ 1.622643] sound hdaudioC0D0: Headphone Mic=0x19
[ 1.622646] sound hdaudioC0D0: Headset Mic=0x1b
[ 1.622649] sound hdaudioC0D0: Internal Mic=0x12
[ 1.627117] ACPI: AC Adapter [ADP0] (off-line)
[ 1.628753] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 1.628924] ACPI: Power Button [PWRB]
[ 1.629010] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 1.630785] ACPI: Lid Switch [LID0]
[ 1.630887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 1.631327] ACPI: Power Button [PWRF]
[ 1.633943] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input3
[ 1.634197] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.635366] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x16
[ 1.635406] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x16
[ 1.635428] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x16
[ 1.635449] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x16
[ 1.635520] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.639579] ACPI: Battery Slot [BAT0] (battery present)
[ 1.640267] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 1.640997] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.641000] wmi: Mapper loaded
[ 1.641249] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.644274] AVX2 version of gcm_enc/dec engaged.
[ 1.662640] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 1.707814] iTCO_vendor_support: vendor-support=0
[ 1.709016] [drm] Memory usable by graphics device = 2048M
[ 1.709022] [drm] Replacing VGA console driver
[ 1.710234] Console: switching to colour dummy device 80x25
[ 1.710749] hid-rmi 0018:06CB:2734.0001: Scanning PDT...
[ 1.711895] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.711954] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 1.712089] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.713279] hid-rmi 0018:06CB:2734.0001: Found F34 on page 0x00
[ 1.715870] hid-rmi 0018:06CB:2734.0001: Found F01 on page 0x00
[ 1.718203] hid-rmi 0018:06CB:2734.0001: Found F11 on page 0x00
[ 1.724578] hid-rmi 0018:06CB:2734.0001: Found F54 on page 0x01
[ 1.727275] hid-rmi 0018:06CB:2734.0001: Found F30 on page 0x01
[ 1.730545] i915 0000:00:02.0: irq 61 for MSI/MSI-X
[ 1.730561] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.730563] [drm] Driver supports precise vblank timestamp query.
[ 1.730596] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.733539] hid-rmi 0018:06CB:2734.0001: Found F55 on page 0x02
[ 1.738729] hid-rmi 0018:06CB:2734.0001: Found F51 on page 0x03
[ 1.740512] usb 2-6: new full-speed USB device number 4 using xhci_hcd
[ 1.744701] hid-rmi 0018:06CB:2734.0001: rmi_scan_pdt: Done with PDT scan.
[ 1.756260] [drm] VBT doesn't support DRRS
[ 1.758240] hid-rmi 0018:06CB:2734.0001: rmi_populate_f11: size in mm: 97 x 59
[ 1.766636] input: DLL060A:00 06CB:2734 as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-DLL060A:00/0018:06CB:2734.0001/input/input8
[ 1.766734] hid-rmi 0018:06CB:2734.0001: input,hidraw0: <UNKNOWN> HID v1.00 Pointer [DLL060A:00 06CB:2734] on
[ 1.775456] fbcon: inteldrmfb (fb0) is primary device
[ 1.802968] input: Dell WMI hotkeys as /devices/virtual/input/input9
[ 1.808667] mousedev: PS/2 mouse device common for all mice
[ 1.841252] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 1.842535] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.842776] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1.854793] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2.394398] Switched to clocksource tsc
[ 2.838140] Console: switching to colour frame buffer device 240x67
[ 2.845934] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.845936] i915 0000:00:02.0: registered panic notifier
[ 2.876371] media: Linux media interface: v0.10
[ 2.876864] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.877001] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 2.877148] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.879690] usbcore: registered new interface driver usbhid
[ 2.879694] usbhid: USB HID core driver
[ 2.883145] Linux video capture interface: v2.00
[ 2.892232] input: SYNAPTICS Synaptics Large Touch Screen as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:06CB:0AF8.0002/input/input11
[ 2.892497] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
[ 2.895106] hid-multitouch 0003:06CB:0AF8.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [SYNAPTICS Synaptics Large Touch Screen] on usb-0000:00:14.0-3/input0
[ 2.895830] Bluetooth: Core ver 2.19
[ 2.895849] NET: Registered protocol family 31
[ 2.895852] Bluetooth: HCI device and connection manager initialized
[ 2.895861] Bluetooth: HCI socket layer initialized
[ 2.895864] Bluetooth: L2CAP socket layer initialized
[ 2.895877] Bluetooth: SCO socket layer initialized
[ 2.901636] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input13
[ 2.901827] usbcore: registered new interface driver uvcvideo
[ 2.901830] USB Video Class driver (1.1.1)
[ 2.910511] usbcore: registered new interface driver btusb
[ 2.925460] Bluetooth: hci0: read Intel version: 370710018002030d2e
[ 2.925464] Bluetooth: hci0: Intel device is already patched. patch num: 2e
[ 3.331899] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 11.275262] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/user-1001.journal corrupted or uncleanly shut down, renaming and replacing.
[ 35.164461] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.241753] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 35.241999] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 35.255097] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.055112] wlan0: authenticate with c0:25:06:84:57:f0
[ 36.058891] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
[ 36.061335] wlan0: authenticated
[ 36.061563] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
[ 36.067260] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
[ 36.070080] wlan0: associated
[ 36.070111] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.070172] cfg80211: Calling CRDA to update world regulatory domain
[ 4501.338278] PM: Syncing filesystems ...
[ 4501.341188] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
[ 4501.341196] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 4501.348617] done.
[ 4501.348622] PM: Preparing system for mem sleep
[ 4501.349019] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 4501.350459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4501.351580] PM: Entering mem sleep
[ 4501.351657] Suspending console(s) (use no_console_suspend to debug)
[ 4501.351917] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4501.358219] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
[ 4501.358222] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 4501.361609] cfg80211: Calling CRDA for country: DE
[ 4501.362122] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 4501.362185] sd 2:0:0:0: [sda] Stopping disk
[ 4501.992409] PM: suspend of devices complete after 640.028 msecs
[ 4502.005724] PM: late suspend of devices complete after 13.299 msecs
[ 4502.006247] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 4502.006367] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 4502.019376] PM: noirq suspend of devices complete after 13.638 msecs
[ 4502.019816] ACPI: Preparing to enter system sleep state S3
[ 4502.020586] PM: Saving platform NVS memory
[ 4502.021109] Disabling non-boot CPUs ...
[ 4502.021139] intel_pstate CPU 1 exiting
[ 4502.022404] kvm: disabling virtualization on CPU1
[ 4502.022854] smpboot: CPU 1 is now offline
[ 4502.023143] intel_pstate CPU 2 exiting
[ 4502.024386] kvm: disabling virtualization on CPU2
[ 4502.125774] smpboot: CPU 2 is now offline
[ 4502.126039] intel_pstate CPU 3 exiting
[ 4502.127395] kvm: disabling virtualization on CPU3
[ 4502.229207] smpboot: CPU 3 is now offline
[ 4502.232189] ACPI: Low-level resume complete
[ 4502.232259] PM: Restoring platform NVS memory
[ 4502.232774] Enabling non-boot CPUs ...
[ 4502.232814] x86: Booting SMP configuration:
[ 4502.232815] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 4502.245238] kvm: enabling virtualization on CPU1
[ 4502.247462] Intel pstate controlling: cpu 1
[ 4502.247514] CPU1 is up
[ 4502.247533] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 4502.259870] kvm: enabling virtualization on CPU2
[ 4502.262107] Intel pstate controlling: cpu 2
[ 4502.262155] CPU2 is up
[ 4502.262172] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4502.274504] kvm: enabling virtualization on CPU3
[ 4502.276760] Intel pstate controlling: cpu 3
[ 4502.276807] CPU3 is up
[ 4502.282141] ACPI: Waking up from system sleep state S3
[ 4502.302447] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 4502.302450] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 4502.302690] PM: noirq resume of devices complete after 11.863 msecs
[ 4502.303102] PM: early resume of devices complete after 0.384 msecs
[ 4502.303194] usb usb2: root hub lost power or was reset
[ 4502.303197] usb usb3: root hub lost power or was reset
[ 4502.315679] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
[ 4502.315810] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 4502.329054] sd 2:0:0:0: [sda] Starting disk
[ 4502.390642] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 4502.535888] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 4502.643402] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 4502.643646] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 4502.649288] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4502.652119] ata3.00: configured for UDMA/133
[ 4502.766135] usb 2-3: reset full-speed USB device number 2 using xhci_hcd
[ 4502.939946] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c09480
[ 4502.939950] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c094c8
[ 4503.099825] usb 2-6: reset full-speed USB device number 4 using xhci_hcd
[ 4503.273741] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a00
[ 4503.273745] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a48
[ 4503.273748] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a90
[ 4503.273750] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6000
[ 4503.273752] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6048
[ 4503.274732] PM: resume of devices complete after 970.836 msecs
[ 4503.275664] PM: Finishing wakeup.
[ 4503.275668] Restarting tasks ...
[ 4503.275774] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 4503.276362] usb 2-5: USB disconnect, device number 3
[ 4503.276546] pci_bus 0000:01: Allocating resources
[ 4503.276576] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 4503.276585] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 4503.276592] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 4503.276596] done.
[ 4503.276614] pci_bus 0000:02: Allocating resources
[ 4503.276646] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 4503.276653] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 4503.276662] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4503.276675] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 4503.276681] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 4503.276688] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 4503.276695] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 4503.276701] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 4503.276712] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
[ 4503.276726] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdfd00000-0xdfefffff 64bit pref]
[ 4503.276739] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[ 4503.276748] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 4503.276756] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 4503.276773] pci 0000:00:00.0: no hotplug settings from platform
[ 4503.276778] pci 0000:00:00.0: using default PCI settings
[ 4503.276791] i915 0000:00:02.0: no hotplug settings from platform
[ 4503.276795] i915 0000:00:02.0: using default PCI settings
[ 4503.276809] pci 0000:00:03.0: no hotplug settings from platform
[ 4503.276816] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 4503.276820] xhci_hcd 0000:00:14.0: using default PCI settings
[ 4503.276836] mei_me 0000:00:16.0: no hotplug settings from platform
[ 4503.276839] mei_me 0000:00:16.0: using default PCI settings
[ 4503.276855] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 4503.276863] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 4503.276871] pcieport 0000:00:1c.2: no hotplug settings from platform
[ 4503.276904] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 4503.276912] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 4503.276917] ehci-pci 0000:00:1d.0: using default PCI settings
[ 4503.276933] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 4503.276938] lpc_ich 0000:00:1f.0: using default PCI settings
[ 4503.276956] ahci 0000:00:1f.2: no hotplug settings from platform
[ 4503.276961] ahci 0000:00:1f.2: using default PCI settings
[ 4503.276976] pci 0000:00:1f.3: no hotplug settings from platform
[ 4503.276980] pci 0000:00:1f.3: using default PCI settings
[ 4503.277590] pci_bus 0000:01: Allocating resources
[ 4503.277619] pci_bus 0000:02: Allocating resources
[ 4503.277652] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4503.277669] pci 0000:00:00.0: no hotplug settings from platform
[ 4503.277673] pci 0000:00:00.0: using default PCI settings
[ 4503.277686] i915 0000:00:02.0: no hotplug settings from platform
[ 4503.277690] i915 0000:00:02.0: using default PCI settings
[ 4503.277703] pci 0000:00:03.0: no hotplug settings from platform
[ 4503.277711] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 4503.277716] xhci_hcd 0000:00:14.0: using default PCI settings
[ 4503.277731] mei_me 0000:00:16.0: no hotplug settings from platform
[ 4503.277736] mei_me 0000:00:16.0: using default PCI settings
[ 4503.277751] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 4503.277759] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 4503.277767] pcieport 0000:00:1c.2: no hotplug settings from platform
[ 4503.277801] iwlwifi 0000:02:00.0: no hotplug settings from platform
[ 4503.277809] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 4503.277814] ehci-pci 0000:00:1d.0: using default PCI settings
[ 4503.277830] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 4503.277835] lpc_ich 0000:00:1f.0: using default PCI settings
[ 4503.277852] ahci 0000:00:1f.2: no hotplug settings from platform
[ 4503.277857] ahci 0000:00:1f.2: using default PCI settings
[ 4503.277871] pci 0000:00:1f.3: no hotplug settings from platform
[ 4503.277875] pci 0000:00:1f.3: using default PCI settings
[ 4503.287972] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 4503.551878] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 4503.596787] usb 2-5: new high-speed USB device number 5 using xhci_hcd
[ 4503.633858] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4503.755400] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 4503.797807] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
[ 4503.801045] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16
[ 4503.943676] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 4506.058296] dell_wmi: Unknown key e00e pressed
[ 4507.048423] wlan0: authenticate with c0:25:06:84:57:f0
[ 4507.051164] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
[ 4507.053766] wlan0: authenticated
[ 4507.056205] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
[ 4507.062403] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
[ 4507.065241] wlan0: associated
[ 4507.065268] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 4812.948936] usb 2-2: new high-speed USB device number 6 using xhci_hcd
[ 4813.124097] hub 2-2:1.0: USB hub found
[ 4813.124371] hub 2-2:1.0: 4 ports detected
[ 4813.392831] usb 2-2.2: new full-speed USB device number 7 using xhci_hcd
[ 4813.477901] usb 2-2.2: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4813.495517] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2:1.3/0003:08BB:2902.0003/input/input17
[ 4813.495657] hid-generic 0003:08BB:2902.0003: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-2.2/input3
[ 4813.515300] usbcore: registered new interface driver snd-usb-audio
[ 4813.546263] usb 2-2.3: new full-speed USB device number 8 using xhci_hcd
[ 4813.648070] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.3/input2
[ 4813.699821] usb 2-2.4: new high-speed USB device number 9 using xhci_hcd
[ 4813.700997] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.3/2-2.3:1.2/0003:046D:C52B.0006/0003:046D:C52B.0007/input/input18
[ 4813.701200] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:14.0-2.3:1
[ 4814.121899] ax88179_178a 2-2.4:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:24:9b:0a:27:f6
[ 4814.121931] usbcore: registered new interface driver ax88179_178a
[ 4814.442429] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4817.483762] ax88179_178a 2-2.4:1.0 eth0: ax88179 - Link status is: 1
[ 4817.485665] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6509.605763] usb 2-2: USB disconnect, device number 6
[ 6509.605773] usb 2-2.2: USB disconnect, device number 7
[ 6509.660447] usb 2-2.3: USB disconnect, device number 8
[ 6509.692281] usb 2-2.4: USB disconnect, device number 9
[ 6509.692540] ax88179_178a 2-2.4:1.0 eth0: unregister 'ax88179_178a' usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet
[ 6509.692573] ax88179_178a 2-2.4:1.0 eth0: Failed to read reg index 0x0002: -19
[ 6509.692584] ax88179_178a 2-2.4:1.0 eth0: Failed to write reg index 0x0002: -19
[ 6509.721655] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
[ 6509.721669] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0001: -19
[ 6509.721678] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
[ 6511.071805] PM: Syncing filesystems ...
[ 6511.077462] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
[ 6511.077473] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 6511.085453] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
[ 6511.085464] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
[ 6511.087129] done.
[ 6511.087139] PM: Preparing system for mem sleep
[ 6511.087676] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 6511.089183] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 6511.090294] PM: Entering mem sleep
[ 6511.090393] Suspending console(s) (use no_console_suspend to debug)
[ 6511.090786] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6511.100925] cfg80211: Calling CRDA to update world regulatory domain
[ 6511.101532] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 6511.101598] sd 2:0:0:0: [sda] Stopping disk
[ 6511.720807] PM: suspend of devices complete after 629.628 msecs
[ 6511.734165] PM: late suspend of devices complete after 13.343 msecs
[ 6511.734991] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 6511.735113] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 6511.747808] PM: noirq suspend of devices complete after 13.629 msecs
[ 6511.748271] ACPI: Preparing to enter system sleep state S3
[ 6511.749033] PM: Saving platform NVS memory
[ 6511.749584] Disabling non-boot CPUs ...
[ 6511.749628] intel_pstate CPU 1 exiting
[ 6511.751130] kvm: disabling virtualization on CPU1
[ 6511.752157] smpboot: CPU 1 is now offline
[ 6511.752650] intel_pstate CPU 2 exiting
[ 6511.754091] kvm: disabling virtualization on CPU2
[ 6511.754112] smpboot: CPU 2 is now offline
[ 6511.755147] intel_pstate CPU 3 exiting
[ 6511.756491] kvm: disabling virtualization on CPU3
[ 6511.857520] smpboot: CPU 3 is now offline
[ 6511.860099] ACPI: Low-level resume complete
[ 6511.860168] PM: Restoring platform NVS memory
[ 6511.860682] Enabling non-boot CPUs ...
[ 6511.860725] x86: Booting SMP configuration:
[ 6511.860726] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 6511.873161] kvm: enabling virtualization on CPU1
[ 6511.875384] Intel pstate controlling: cpu 1
[ 6511.875441] CPU1 is up
[ 6511.875462] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 6511.887813] kvm: enabling virtualization on CPU2
[ 6511.890055] Intel pstate controlling: cpu 2
[ 6511.890104] CPU2 is up
[ 6511.890121] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 6511.902450] kvm: enabling virtualization on CPU3
[ 6511.904715] Intel pstate controlling: cpu 3
[ 6511.904763] CPU3 is up
[ 6511.910077] ACPI: Waking up from system sleep state S3
[ 6511.930462] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 6511.930469] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 6511.930713] PM: noirq resume of devices complete after 11.834 msecs
[ 6511.931215] PM: early resume of devices complete after 0.474 msecs
[ 6511.931290] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
[ 6511.931308] usb usb2: root hub lost power or was reset
[ 6511.931310] usb usb3: root hub lost power or was reset
[ 6511.932049] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
[ 6512.019117] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
[ 6512.030458] sd 2:0:0:0: [sda] Starting disk
[ 6512.143743] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 6512.143995] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 6512.237297] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 6512.350707] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6512.353607] ata3.0Update: I mucked about more after making this post; I installed gnome-alsa-mixer and checked the "internal mic" option and "Auto-Mute mode" (both were off), after this my headphone output works again, and does the built-in microphone (!)
I have no idea how I ended up in this "broken" situation, or even what this option does, or how to use it without gnome-alsa-mixer (I had to install 15 packages to get this, as I normally don't use gnome)... Sound on Linux still seems no better than when I started using it 15 years ago :-( (I spent about 5 hours on this...) -
Internal speakers have stopped working (Lenovo W500 with Win 7 Pro)
Hi
I have a Lenovo W500 4062-5YG... O/S: Win 7 Pro
My sound device is a Conexant 20561 SmartAudio HD.
The problem is, that the internal speakers have stopped working all of a sudden... I think it is a hardware problem since when I hookup external speakers or headphones they produce sound... but I am no expert!
I have done the following to try and fix it:
Disable, then enable audio drivers
Uinstall, then install audio drivers
Setting the internal speakers as the default speaker source
Restoring the system to an earlier day (where I knew that the speakers had functioned)
None of these actions have worked.
I actually thought I could perform a hardware test on the speakers in the "Lenovo Solution Center"... but it doesn't seem like it:-(
So...
How can I know for sure whether it is a hardware or software problem?
And more importantly - How can I get my internal speakers to work?
Any help is appreciated.
Cheers
PhilipHello Philip,
As mentioned in your post, you have performed all the major troubleshooting steps to resolve the issue. I suggest you to update your BIOS also in order to resolve your issue. You can download and update the BIOS update utility from the below mentioned web link.
http://support.lenovo.com/en_SG/downloads/default.page?
Kindly click on Quick path and put your 7 Digit TYPE-Model number(40625YG) in the box and then click on the Find My Product. Please click on BIOS and then download the BIOS update utility according to your Operating System. It might resolve your issue. If it will also not work then it seem to be an issue with hardware. Kindly get in touch with the support centre they will assist you and try to resolve the issue.
Regards,
Harish
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
My adobe cloud desktop app seems to have stopped working. I keep getting a error message saying Unable to reach adobe servers, please check firewall settings.
The creative cloud icon on the top menu bar is greyed out, and not updates show.
I have spoke to our internal IT and my settings are the same as my colleagues who's is working fine, can anybody help with this ongoing problem?Grafix121 please ask your I.T. department to review the Adobe Creative Cloud Security FAQ for IT section of Creative Suite Enterprise Deployment | Adobe Developer Connection for information on how to configure your network to allow connections to the Adobe servers.
Maybe you are looking for
-
HI Experts, I am having an issue regarding the table control's internal table. I have a table control in which I am getting data from PBO. But when I press enter and see the data in the internal table the internal table is filled with total lines of
-
How to install a Bose Soundlink?
Dear all, My problem is, that my MacBook Air is not able to find the Bose Soundlink (USB connection). The Bose Sound System shows always that a "Computer" has been found, but the transport from my music on the MacBook to the Bose Sound System does no
-
How to unselect all docs. in book panel
Instructions read to unselect all documents in book panel in order to print all docs. I just cannot figure out how unselect all. There is always one document selected. Help please
-
Since I am waiting on my "November" deliver date, I'm thinking that I may be able to augment my order before its delivery. The iMac listed in my info below died, so I ordered a new quad-core iMac a few days after their announcement. I often tell peop
-
Please help me in this matter urgently: How I can write Arabic in Javascript code Text