Help my HP Mini 210-1010NR PC

I don't know why but when I'm on my netbook it keep over heating when I'm charging it. It somethimes will over heat even when it not plug in to the wall. I check the fan and it is running at all times i had a fan to put under it but that don't help it turn my sreen blue. Does anyone know what could be making that happen? 

Hi Darkfirepr,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Mini 210-1010NR and start up issues. Here is a link to troubleshoot the HP Mini. Before starting please disconnect all connected devices and cables such as Personal Media Drives, USB drives, printers, and faxes. Remove media from internal drives, and remove any recently added internal hardware.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • HP Mini 210-1010NR PC Not Booting

    My sister found her HP Mini 210-1010NR PC recetly.  She was using more her phone and a desktop.  She ask me to check it but the computer don't boot.  Don't give me any error messages or let me access the f keys options posted in another posts.  When I turn it on make the regular noises and I can see a blinking white cursor like line. The computer use Windows 7 Starter (32-bit).  I will like to make a factory restore to the notebook.
    I try to order the System Recovery Kit for Consumer Notebook (2 Discs) but the system don't allow me.
    Thanks

    Hi Darkfirepr,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Mini 210-1010NR and start up issues. Here is a link to troubleshoot the HP Mini. Before starting please disconnect all connected devices and cables such as Personal Media Drives, USB drives, printers, and faxes. Remove media from internal drives, and remove any recently added internal hardware.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Can anyone help with my Mini 210 Bios Password

    Can anyone help with my Mini 210 Bios Password
    master password after enter 3x comes CNU9491VLG
    Thanks in advance

    Hi,
    Please try (all lower cases):
       e9lovo36kh   (3rd char is lower case of L).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp mini 210 1010nr video card upgrade

    i wanted to upgrade the video card? is this possible? also different people tell me i can upgrade to 2 gigs but others say 4g on the laptop? i also wanted to put windows xp professional on it and not use the windows 7 starter....if anyone has a bit if information please help

    Hi:
    2 GB is max on your notebook.
    Here is the processor spec direct from Intel. Note the max memory size is 2 GB.
    http://ark.intel.com/products/42503/Intel-Atom-Processor-N450-(512K-Cache-1_66-GHz)
    You cannot upgrade the video adapter. It is soldered to the motherboard.
    There is only one system board, so there isn't even another motherboard available with better video.
    In order to install XP you need to slipstream the SATA AHCI driver.
    Read this helpful guide below. Read the Intel section. Then use the guide to slipstream all of the drivers.
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/SATA-drivers-for-XP-solution-on-0x000000...
    And being the nice guy that I am, I have attached the drivers you need to slipstream to get XP installed.
    Paul
    Attachments:
    NM10 ACHI Drivers.zip ‏258 KB

  • Help on HP Mini 210

    sir can i ask help about my netbook
    someone uninstall my Recovery manager.
    i havent created any single  recovery but
    my Drive D Recovery is still intact
    how can i make my recovery?

    Download the Windows 7 32-bit recovery environment from here. Download the Windows 7 USB DVD download tool from here.
    You will use the ISO that you downloaded and the  Microsoft Windows USB DVD tool to create a USB repair media thumbdrive.
    When you boot your netbook from the USB thumbdrive you should have access to the repair function of Windows and a command line console. In the comand line console you will be able to use the diskpart command to make your recovery partition D: active again.
    Type the following commands and press the enter key after each one. 
    diskpart
    list disk ( you should see a list that shows your USB thumbdrive and hard disk)
    select disk X (I chose X arbitrarily . It represents  the number of your installed hard disk)
    list partition ( you will see alist of partitions on your hard disk)
    select partition Y ( Y is the number that represents your recovery partition from within the list generated by the previous comand)
    You should see that the correct partition is now selected by an asterisk next to it 
    active (diskpart will respond that it marked the partition as active)
    list partition (you should see a partition list with the recovery parttiion now shown as active) 
    exit and then close the command window
    The following image is just an example of the responses you should see after entering the commands
    Once that is done you should be able to reboot and use the F11 key to access the recovery manager and recover your netbook to its factory image state by use of the Recovery Manager.  
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Hp mini 210-1010NR slow respond

    I'm new to this , so any idea ? Ide appreciate if someone would.

    Hello hiligaynon,
    I see that you are having problems with the computer responding slowly. I have a couple of suggestions that may help with this issue.
    Here is a link that shows how to do a clean boot on the system. Follow the steps in the link and it may help with the response issue.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • MINI 210-1010NR NOTEBOOK BATTERY

    I NEED TO KNOW WHERE CAN I BUY A NEW BATTERY

    Hi,
    You can buy from this:
       http://h20141.www2.hp.com/hpparts/?cc=US&lang=EN&j​umpid=hpr_r1002_usen
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Mini 210-1010nr netbook

    I bought the netbook for my 13 year old son just three months ago.  Tonight he brought it into me saying it wouldn't load, so I took a look at it.  It will boot into HP quickstart but that's all.  At windows boot I get the message that a disk read error occured.  I went into the bios and ran the diagnostic utility on the hd and it says to replace the hd.  What gives?  This computer is only 3 months old!
    I am in the Army and presently stationed in South Korea, so I can already imagine how much of a hastle this is going to be. 
    So what is my next course of action?

    My apologies, I missed that sentence when reading through his post. Guess I've got a delayed case of the Mondays... . Yes, I realize he is in Korea, but not too much "guerilla" work can be done. I'd still recommend contacting support, in case a replacement drive can be sent out to him, perhaps they can walk him through swapping it as well.
    aidenCole, your unit has a feature called a service door, which makes accessing the hard drive a little easier than on other platforms. Take a look at this video:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02062583&tmp_task=useCategory&lc=en&dlc=en&cc=u​...
    Also, look at pages 43 and 44 of your maintenance  and service guide, which can be downloaded here:
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?​lc=en&dlc=en&cc=us&lang=en&product=4121202&
    Before proceeding, call HP support to see if you can get a replacement drive sent to you.
    I am an HP employee.
    • Say thanks by clicking the 'Thumbs Up' button on the left
    • Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution' if it solves your issue

  • HELP MY NOTEBOOK HP MINI 210-1101TU

    i have problem with my notebook, can't booting and entered to windows because my system recovery is nothing, i have to try for use Roxio BackOnTrack but still not able to get my USB boot on, what should I do so that my notebook can run as before anymore? anyone please HELP ME.... you cant give me suggestion to my email [Personal Information Removed]
    I attach the following picture at boot time

    Hi Belajar,
    I understand you are having complications with the boot menu on your HP Mini 210-1101TU. Here is a document on how to choose the boot devices.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​dlc=en&docname=c00364979&lc=en&product=4207223&tmp​...
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Help HP mini 210-1000

    Ii have an HP mini 210-1000, for some reason the HP quick web was turn off. how do we turn it back on?

    Enable IOS through HP QuickWeb Configuration Tool
    To enable the IOS through the QuickWeb Configuration Tool, do the following actions:
    Click Start, All Programs, HP QuickWeb , and click HP QuickWeb Configuration Tool .
    Alternately, click Start , All Programs , and then click the IOS Configuration Tool .
    Select the Enable HP QuickWeb (or Enable IOS ) option, and click OK . Restart the computer.
    The HP IOS program is now enable through HP QuickWeb.
    remember to click the white kudos button for me if this helped you

  • I have an hp mini 210-4000 that has had no sound for 48 hours, little help?

    Model: HP Mini 210-4000
    O/S: Windows 7 (starter)
    I have had no audio for about 48 hours now and am looking for some help please. At first I thought that it may have been a hardware failure but having done a system check windows is informing me that the internal speaker is enabled and that it is working normally. There has been no physical damage to the notebook either.
    I have tried all of the standard troubleshooting techniques that are suggested and have tried restoring everything to the way it was about 4 days ago with no success.
    The light next to the mute button has stopped lighting up no matter whether it is set to mute or not. In terms of the software if I perform standard tests and play audio through any programs it is being recognised by everything (speaker icon, 'beats' audio desk, applications etc) but there is just nothing to be heard.
    The notebook is set to normally install automatic updates and I have seen from the forums that other people have been experiencing similar problems from across the board. Has an update been released that may have caused this?
    Any help that people can offer in rectifying this problem that I'm assuming is software-based would be greatly appreciated. Cheers  

    Hi
    Please try these steps and check and let me know if this works.
    Resolving No Sound or Audio Problems in Windows
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Mini 210-2080nr touchpad help

    Hello,
    I recently bought a HP Mini 210-2080NR and I'm having difficulties with the touchpad. The right and left key is connected to the touchpad. When using the touchpad, I'm able to navigate with the entire touchpad including the keys and that is causing a huge inconvenience.
    Is there a way to lock the right and left click keys on the touchpad, so I'm able to navigate smoothly? Thanks in advance.

    Check if you have Accidental Contact Mitigation (ACM) feature in the Synaptics Properties Windows, that will help you set restrict the tap and pointer movement zone...So outside that zone, you can have more control over tap and pointer movement, To Activate the function, Click on Filter Activation Time, and set the Filter Activation Time to Zero Seconds and check.......Check below screenshot...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Netbook Mini 210-2070NR Recovery Help

    Netbook has been working fine. Just went to start and it won't boot. Hit Esc and ran Hard Disk Diagnostics and received following
    Failure ID 6C2PMG-59F5P9-9XL03F-60T503
    Product ID: XG712UA#ABA
    No start up CD. Everything came preloaded. Unit is less than a year old.
    Running the Win 7 Startup software

    You need to replace hard drive on the Notebook.Contact HP if the Notebook is still within warranty period  else if the Notebook warranty has expired and If you have some knowledge on disassembling laptops , this can be done on your own.
    The instructions for replacing hard drive on Mini 210 Notebook can be found at below link
    http://h10032.www1.hp.com/ctg/Manual/c02619136.pdf
    After the hard drive has been replaced, you can order USB recovery kit(Windows 7) from below link
    https://warp2.external.hp.com/driver/dr_country_select.asp?Product=633217-002&lang=en&cc=us
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • HP Mini 210-4000 Blue Screen of Death PAGE_FAULT_IN_NONPAGED_AREA error

    I've been up and down the Forums here with no specific luck, unfortunately, so I'm going to ask even if this has been queried and solved in another part of the site which I may have missed.
    I am trying to sort out a friend's HP Mini Notebook, model HP Mini 210-4125sa. The machine started up well enough until a week ago, when it suddenly decided to blue screen.
    The specific error message text displayed within the BSOD reads as follows:
    PAGE_FAULT_IN_NONPAGED_AREA
    TECHNICAL INFORMATION:
    *** STOP: 0x00000050 (0x87E40000, 0x00000000, 0x92442B13, 0x00000000)
    I can not boot past the Windows 7 loading screen - the load bar makes it two fifths up and that's it.
    I had thought to try and recover the operating system, if at all possible, from what is apparently a recovery partition that is created on the HD ( i haven't worked with these machines before unfortunately), although i cannot figure how to get at this partition before the error hits.
    Also, having attempted to download a piece of software from the HP USB Recovery Flash Disk Utility, i realise that it seems necessary to actually use this from the notebook itself, which is not possible.
    Having started running the various onboard tests from the BIOS menu, the Hard Disk Test has just apparently failed (specifically the Hard Disk Optimized DST portion of the test), with failure ID GGBXXV-66A75U-MFPX0J-61VV03 (i'm not certain if this information is of value but am including it nonetheless).HP have not unfortunately been an awful lot of help as they wil only offer a one-off technician support call for forty quid, or to take the notebook away for repair, the cost of which is practically as much as the original cost of the hardware. I would of course prefer to try and sort this out myself but have hit a bit of a wall at the moment. Any suggestions would be fantastic, at this point.
    This question was solved.
    View Solution.

    That hardware test for the hard disk is a dead giveaway of a failed item. A failed hard disk  is a show stopper.
    Hard Disk Optimized DST portion of the test), with failure ID GGBXXV-66A75U-MFPX0J-61VV03 (i'm not certain if this information is of value but am including it nonetheless) It is important information. 
    A corrupted NTFS volume (the hard disk) can also generate the " PAGE_FAULT_IN_NONPAGED_AREA error"  stop message.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Replacemen​t HP Mini 210-2006sa Keyboard in UK

    Good day all.
    Could someone please advise me where I can buy a new Replacemen​t HP Mini 210-2006sa Keyboard in UK.
    Thanks for your time.
    Best Regards.

    You need this:
    For use in the United States #622344-001
    The laptop was sold in the USA and there is an us keyboard but you are in the UK, am I right?
    http://www.com-com.co.uk/hp/partlist/0048274.ihtml
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Maybe you are looking for

  • How do I use infopath 2013 with visual studio 2013 to modify forms with code?

    Dear all, I am using sharepoint online and infopath 2013, I wonder how do I edit infopath 2013 forms with visual studio? When I try to edit form code it says  I need visual studio 2012 and some other tools, I installed them and visual studio 2013, I

  • Reducing the size of fillable pdf

    I'm creating fillable forms in Adobe Acrobat 9 Pro. There are about 14 forms and each file is about 300kb, in toal the file size is around 4.10mb. I would like to be able to send the file by email but I'm worried that it would be too big, is there a

  • How to Sort Print Presets in IDCS3

    Hello I have a long list of print presets, and I would like to sort them. Is there a way??? I would hate to manually recreate like 30 of them. Thanks, Art

  • Error in credit note

    HI GURUS, I am facing one problem when creating credit note When I am creating credit note in VF01, billing type G2 with reference of credit request no (order type CR),it showing me one error (order type CR is not defined).its urgent.

  • Safari isn't loading images on pages since this morning.

    For instance,if I go to apple.com, all I get is lines on the screen and the titles of what is supposed to be there. No images. This happens on all sites, some worse than others. Firefox is fine. No problem seeing all sites with Firefox. I'm using a M