Help my Hp2-1311 says power on password
My hp2 -1311 says power on password i dont no it can any one help me
This question was solved.
View Solution.
Typically the power on password is a BIOS password. Look at THIS page and scroll down to "Clearing the PASSWORD settings"
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.
Similar Messages
-
My screen says Administration password or power on password !! Help!
Hello! My computer when turned on says "Administtation password or power on password"
My error code is 50842388Hi, Please try: 45720908 Regards.
-
Help Please - X200 will not boot after Bios Upgrade - keeps asking for power on password
Hi there,
I am new to this forum and please let me say a big Thank You for your help in advance.
I am using a lenovo thinkpad x200 running windows vista with service pack 1.
The laptop has always been running fine and has never given me any issues. Unfortunately, all this came to an end yesterday when I ran the system assistant which did a round of updates and it prompted me to reflash my bios.
I did what was instructed and closed all open applications and after the laptop restarted, there was a noise from the harddisk (the sound was basically like what happens if the harddisk suddenly loses power). Then, all i got was a black screen, no harddisk acitvity with only the power cable LED and another LED (with the shape of a N tiled at 20 degrees) on.
I searched the forum and did what was suggested in this entry: http://forum.lenovo.com/t5/X-Series-ThinkPad-Laptops/Blank-screen-after-Bios-Upgrade-on-X200/ta-p/29...
This is what I did so far"
I turned off the power, took out the backup battery and waited for about 30 minutes (repeated this step several times, also removing the harddisk) but to no avail.
I removed the RAM and tried booting and there was that characteristic beeping sound.
I replaced the RAM, redid the CMOS clearing, and now there is the Lenovo startup screen. However, there would be an error code 0271 (no date time) and 0251 (something about default configuration). Then, these disappear and all I am left with is the Bios Power On password prompt. Somehow no matter what I type nothing can be input into the field (and I did not create any password as far as I can remember).
I redid the clearing for the power on password by removing the backup battery as suggested at the bottom of this page http://support.lenovo.com/en_US/detail.page?LegacyDocID=migr-59377 but it is no use. Each time I restart, even if I press the blue Think Vantage button or F1 or F11, I still get the same 0271 and 0251 error messages and am left with the power on password prompt.
I am really desperate as I really like my lenovo x200 and there is important data on the laptop. I would appreciate any suggestions on how I can solve this. Its amazing how a simple update can turn into such a disaster. Now i know i should never upgrade or update my Bios (or at least proceed with extreme caution).
Anyone can provide some help to get my laptop workin again?
Thank you very much,
Marktry reflashing your bios?
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-70348
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
Help me on my hp administra​tor password or power on power pls
Good Morning Pals, am using hp window 8 product, my junoir brother when ahaead to input power on password. he forget what he use. now my ready to print my project from it since day before yesterday. after i press the password he though he used 3 times it bring out this message: system disabled and 51337475.
Please i would like if any1 can help mt wit dis
This question was solved.
View Solution.Hi,
Enter: 44095471
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
pavilion G6 power on password forgotten by my friend, just trying to help her. halt code 66158175
This question was solved.
View Solution.Hi,
Try entering: 79830171
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
all of sudden, my power-on -password is not accepeted as shown as invalid. I get "system disabled 14857" after entering it 3 times. Plese help me reset my pc. Please e-mail me or tell me how to clear this issue. Thanks in advance.
Please try this Password = ygvqrqw Steps to be followed:1. Use the unlock code posted above to enter the BIOS2. Disable all passwords that are enabled3. If asked for current password - type the unlock code4. For new password, just press ENTER key5. Repeat the same for verify password column.6. Then leave the BIOS by saving & exit option to save the changes. Troubleshooting:Incase if the Password doesn’t work please try a Hard Reset as follows.1. Shut down the notebook2. Unplug the AC Adapter and then remove the battery3. Hold down the Power button for 30 seconds4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook5. If you now see a password box, Please type the same password I shared before & press enter Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP
-
I have an ipad air and I'm trying to set up a telus email on it but it won't work. I keep getting a message saying username or password for IMAP is incorrect...please help!
This has nothing to do with iPhoto. When I have this type of problem I call tech support for my email service. They probably are the only source of the correct settings
LN -
I have been using THUNDERBIRD for more than 10 years, changed and installed into many desktops and laptops. But this time, after I installed in my new desktop WIN8, I cannot set up any of my IMAP accounts. They are not gmail/yahoo. They are my business emails. But the settings I have been using is the same and not changed, tried uninstall, reinstall, I'm copying the exact settings that I have on my laptop (which is working perfectly fine). It kept saying "username or password is wrong"!!! My username is the full email address which I put it correctly. The port is the same port I used on the other computers. I just don't understand why is this happening...my laptop is using WIN8 as well...
I can install and use with MAILBIRD, so the setting are all correct. But I just can't set any of my 5 accounts (same domain) up on this THUNDERBIRD this time...it's really frustrating.
Can anyone help please??? Thanks in advance!I interesting note:
MAILBIRD uses port 993 for incoming mail but THUNDERBIRD uses port 143
When uses 143, it kept " checking capabilities...."
then I changed to port 993 (like in MAILBIRD), it said "connected to.....mail," but then "timed out"
Any idea please???? help....extremely frustrated... -
My iphone is disabled and says conncet with itunes but it say cant help you untill you put in the password?
Restore in Recovery Mode: http://support.apple.com/kb/HT1808. If you don't have a backup your data will be lost.
-
Need help hp 520 power on password ican' break it
pls help hp 520 power on password i try reset in bios still on power on password
pls help hp 520 power on password i try reset in bios still on power on password
-
My ios is upgrade to 7.0.2, but I forget my power-on password, so the iphone is disabled and I can't use it now except for emergrncy call. Please help me...
I tried this way , but I forgot my e-mail address too !
and I dont have any idea to re-active my iPhone5 ..
sombody help me . -
New Website up people saying it needs password HELP
I just published a website and now people are telling me it says it's password protected. I was able to open it on my pc so I'm not sure what is happening.
Anyone can help me. I need to get this running today.
ThanksTry disabling your antivirus and firewall software. It can interfere with the restore/update process.
-
My AppleTV says my iTunes password is incorrect, but it is correct when logging in via my Macbook, iPad and iPhone. Do I need to reset it entirely in order for it to work on all 3 devices? This happened randomly without me logging out and back in, and I've already tried restarting the AppleTV. I really dont want to have to create another new password.
Change your router channel number. Most times this works & is all you have to do.
See KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
============================
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary. -
my apple id/password work on my iPhone, iPad, and on my new iMac, except for the Cloud that says the id/password are incorrect. works on all the other iMac apps, just not the cloud. Help
Go to settings>store and make sure the new apple ID is logged in at the bottom of the page.
If not, log out of the old one and sign in with the new one. -
Power on password - not working
Hi, so I have this x61s laptop for 6 months and decided it wasnt what I am looking for so i wanted to sell it. I tried to restore it to the factory setting and everything went fine. last thing i did was remove the BIOS password, I did. and it seems that there is a power on password I cant change it. It says I put in the wrong code. "but I only use 1 code for every password".... I have no idea what to do. Now when i restart it asks me for the power on password which I dont have, and nothing I can do about.. please help.. it cant even boot up.
really...there is something wrong with the laptopHi,
here short terms how I fixed it:
- opened fingerprint program & disabled everything which is of concern for authenticating with fingerprint
- deleted fingerprint with that software too
- disabled biometric device with windows tools
- deleted TPM with tpm.msc
- removed everything from BIOS regarding fingerprint, password for booting, hdd, etc
- resetted fingerprint with bios too
- loaded bios setup default (cause it was a BIOS update)
- shut down computer
- startup again and set everything in BIOS which is needed and has been disabled before
- did the same in windows (enabled everything again)
- rebootet.... prayed... computer prompts with "fingerprint matched" ==> first YEAH
- provided boot up password once....
- shutdown again....
- started with enrolling fingerprint only.... no prompt for password any more.... second YEAH
DONE
Maybe you are looking for
-
Adobe illustrator cs6 has stopped working
adobe illustrator cs6 has stopped working please give me solution for this error
-
Will I loose all my files and photos when I upgrade from 10.5.8 to Snow leopard
I have purchased Mac OS X Snow Leopard from the Mac store and I am ready to install it. Will I loose all my files and photos when I install it ? I am upgrading from 10.5.8 to 10.6.3 Snow leopard.
-
Header portlet issue: User settings not passed to Header portlet on "My Pages"
I am trying to write a header portlet which reads User Settings (User preference). The settings are retrieved correctly and the header portlet works fine on a Community portlet but when browsing "My Pages" or "Knowledge Directory" the settings are no
-
HT201303 Keeps asking for my security code and I know it's last 3 on card
Why it won't let me get free apps with my card keeps taking me to billing info and asking my security code
-
THX Console settings (Crossover 80Hz or 100?
Hello everyone. I've been trying to find the perfect value in the Console THX since a while, in order to achieve the best quality possible with my X-Fi XtremeMusic and Creative Inspire T7700. By default the Crossover is at 00Hz but I noticed that whe