Help.My HP8660 all-in-one is not working properly.

When I use color scan and copy, the paper came out wiht a lot of vertical colorful lines .But it is working fine if I just copy in black and scan in grayscale.
This question was solved.
View Solution.

Hi,
Try connecting the printer directly to a wall outlet, remove any power strips, extensions, surge protectors, etc..
A such is likely to happen due to power issues.
If that does not help try following these steps:
http://support.hp.com/us-en/document/c04422559/
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • HELP! My new muse site is not working properly?

    Did I make a mistake when I used a muse theme? My last site worked a treat. This one is not working at ALL
    www.gsvalves.co.uk
    None of the clever widgets are working, such as the homepage slide show and the documents tabbed selector on the catalogues page.
    None of the full width headers or footers are working either.
    Why? And really HELP!
    I have re output, re uploaded entire site already. It works in BizCatalyst, but I can't use that as customer already has own hosting. It works in preview, and only comes a-cropper when I upload using filezilla. The in built FTP doesn't want to work with this hosting. I don't know why.

    Thanks Zak. They had replied thus (before your response)
    Looking at IIS I can see all of the files in the list below so it appears to have uploaded correctly.  Are your
    scripts Java scripts with .js extensions?  If so then I am wondering if this may help you -
    http://forums.iis.net/t/1069630.aspx?IIS+not+running+Embedded+Java+Scripts.
    But this does not help me obvs, as the point of using Muse is that I do not have the expertise to go in and hand hack the code. Otherwise I probably wouldn't be using Muse right?
    So, I have sent this screenshot and asked them to please adjust the permissions to work. Unless this answer makes more sense to you than me...

  • HP 3520 all in one airprint not working. Firmware update cannot proceed

    Dear HP,
    Two days ago I purchased a HP Deskjet 3520 ALL in one printer. The installation went smooth and I am able to print wireless with my PC. However I cannot print with my iPad, iPhone 5 and using airprint. I am able to print with my HTC one mobile phone. I already went through the Apple airprint troubleshoot http://www.apple.com/support/ipad/assistant/airprint/#section_1 .
    Trying to solve the problem I wanted to upgrade the firmware.  But when I try to update firmware with the HP device updater I get the 'Update cannot proceed' message. I have tried a wireless update and an update with my usb cable connected. I have even tried various usb ports. I checked the control panel to see if my device was connected and available and it was. I have reinstalled the driver sofware from the hp website: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5162... . I have also performed reset (disconnected ALL cables, waited more than a minute, held the power button for 30 seconds and reconnected the power cable) but with result.
    How can I update my firmware to the latest version to check if I can use airprint?
    My current firmware version = STP1FN1241BR ( Hp docter)
    I am using Windows 7 64 bit

    Sorry for the delayed response. My phone quit telling me I had any notifications.
    This could be a number of things really.  Do not forget you can contact HP Cloud Support at 1-855-785-2777 and they may be able to assist you with this (not sure of any policies regarding warranty, etc, etc).
    This link will cover some of the basic router settings.  I wouldn't get into anything too detailed so these settings should be easy to change.  I made this post to help me as a reference to network issues.  The info here is from my time with Cloud Support in regards to helping you print from Apple/mobile devices.  Although the post is titled differently, this is the same info I would have given you over the phone.
    Let me know if that information helps you any.  Also, try the HP ePrint app and see if the printer is found using that method.  I am always happy to help so let me know what happens.  I will try to keep a closer eye on here for your response.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • HP Envy 5530 e-all-in-one Does Not Work With Mac

    Just bought an HP Envy 5530 all-in-one. It does not print through Safari and possibly other Mac applications. Does not frame the page properly even with "print page" and prints slower  than 1 page per minute, even with no background images. My old HP had no problem with Safari. Phone support tells me there is no driver or fix. So I will return the device. Seems crazy. I now see othr commenters saying it doesn't work with Mac. If HP's no longer works with major Mac applications, they will be returned in droves. Anyone know why or know of a fix? 

    I am having the same issue. Did you ever find a solution? 

  • NEW COMPUTER ALL-IN-ONE DOES NOT WORK, OR CAN MY INK BE DRY?

    HAVE INSTALLED DESKJET ALL-IN-ONE 250 J410 SERIES IN NEW LAPTOP.  JUST RETURNED FROM 5 MONTH ABSENSE.  COULD MY PROBLEM BE DRIED UP CARTRIDGES OR?  I THOUGHT AT LEAST THE PRINTER WOULD ATTEMPT TO PRINT EVEN WITHOUT GOOD INK.  i HAVEN'T FOUND WHERE ON THIS COMPUTER I CAN FIND THE STATUS OF MY INK. CAN SOMEONE HELP?

    Hello @evidi,
    I understand that you're experiencing an issue printing from your Windows 7 computer to your HP Deskjet J410 series printer. I would like to assist you today with resolving this printing issue. However, I do need to confirm which exact HP Deskjet you are using within the J410 series?
    (1) HP Deskjet 1050A All-in-One Printer J410 Series:
    HP Deskjet 1050A All-in-One Printer - J410g
    HP Deskjet 1050A All-in-One Printer - J410h
    (2) HP Deskjet 1050 All-in-One Printer J410 Series:
    HP Deskjet 1050 All-in-One Printer - J410a
    HP Deskjet 1051 All-in-One Printer
    HP Deskjet 1055 All-in-One Printer - J410e
    HP Deskjet 1056 All-in-One Printer - J410a
    In the meantime, can I please have you click here to download and run the HP Print and Scan Doctor Tool. This Tool will run on your computer and 'fix printing' issues for you. Should any driver, software, or connection conflicts be found than the HP Print and Scan Doctor Tool will attempt to resolve those conflicts for you.
    Please respond to this post with the result of running the HP Print and Scan Doctor Tool. Should the issue persist be sure to let me know exactly what HP Deskjet printer you have. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • 21 h-010 all in one touchscreen not working!

    My touchscreen hasn't worked in weeks and I found a thread on the topic already that suggested to use the recovery tool and reinstall the driver, but I tried all that and was told the drivers are up to date and the device is working properly.  Is there another fix for this because I'd really like to have a working touchscreen since I paid more for that capability.

    What is the installed operating system?
    Try Microsoft update. The touchscreen drivers for the touchscreen in Windows 8 and 8.1 are included in the driver store and at Windows update.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Help! My Today view Widgets are not working properly!

    I have an iPhone 6 Plus on iOS 8.1 and I thought upgrading from 8.0.2 would fix this problem but it didn't. My Today widgets don't seem to work properly. The Yahoo Weather widget is empty and randomly flashes what it is supposed to display correctly, but for like half a second before becoming blank again.
    The Reminders widget doesn't even show up even though there should be 2 reminders. The weather information in the Today Summary doesn't appear either. I've tried installing Wdgts and only half of the widgets show up even though I've selected all of them.
    Is there a fix for this or is this a known bug? I've tried restarting the phone and what not, but the same problem is still persisting.

    Thanks Zak. They had replied thus (before your response)
    Looking at IIS I can see all of the files in the list below so it appears to have uploaded correctly.  Are your
    scripts Java scripts with .js extensions?  If so then I am wondering if this may help you -
    http://forums.iis.net/t/1069630.aspx?IIS+not+running+Embedded+Java+Scripts.
    But this does not help me obvs, as the point of using Muse is that I do not have the expertise to go in and hand hack the code. Otherwise I probably wouldn't be using Muse right?
    So, I have sent this screenshot and asked them to please adjust the permissions to work. Unless this answer makes more sense to you than me...

  • Why has my Kodak all in one printer stopped working properly since downloading Yosemite?

    Printer feeds paper and ink carriage passes twice and then stops.  Eventually the paper is spat out with no ink on it.  Bizarrely the printer works fine if you request a test print or printer head alignment test.  Is this a software issue?

    Yup this truly *****!!! My Kodak all in one printer also won't work either since I updated my Mac Just have to say Apple that it is really disappointing when you are running a small business and you have to spend extra expenses that shouldn't be necessary in buying a whole new printer. I checked your printer updates and sure enough there was every update for every other printer except Kodak. Ah well.. while am going to spend money on a new printer I might as well spend money on a new computer too.

  • Photosmart C7280 All-In-One Wireless Not working

    My wireless printing was working fine with my Photosmart C7280 for about at least a year or more and now recently the wireless side stopped working. My Apple devices (both iPad and Macbook) stopped recognizing my printer. Even when I tried to add via IP address, it would not take.
    My printer is working fine when hard wired thru both my PC and Macbook via USB.
    I tried resetting my printer network settings by restoring to Network Defaults and adding back in my SSID and Password. It shows it is connected. But when I run a Wireless Network Test Page from within the printer settings, it shows everything passed and signal strength is excellent. However, the last diagnosis in the summary shows "No" to "Other networks detected matching your network name (SSID)"  so I am wondering if my printer is actually connecting properly to my network? Since I have other wireless devices connected to the same SSID.
    I turned both the printer and other devices off and then on to reboot. I turned the wireless radio within the printer settings off and on again.
    Another thing I'd like to mention is that before I deleted the printers in my Apple devices, they still showed my Photosmart 7200 series, but stated they were inactive.
    Also when I was able to get into my Verizon FIOS Broadband Router Management software thru my browser, it showed all my wireless devices, but it also showed my Photosmart as being inactive wirelessly, where the other devices that were turned on at the time were showing connected.
    I am wondering if it may have been a recent Apple update that may have caused this problem? However the Verizon Fios also showed the printer as being inactive so I am guessing not?
    I have been working on this issue for days and spent a ton of time thus far, so any suggestions to resolving this issue would be greatly appreciated.
    I am about mid-level in technical understanding. So please spell out answers to any resolution steps very simply in your reply.
    This question was solved.
    View Solution.

    Honestly, ISP-issued routers are very problematic.  Restart the Westell by pulling its power cord momentarily just before trying to connect the printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP c4480 All-in-one - scanner not working (Mac)

    I recently bought a new computer (Macbook Pro) which has Yosemiti.  On both Yosemiti and Mavericks operating systems, when I scan a document, the document is black with white lines appearing through the black about every inch.  The printer works.  What do I need to do to be able to scan ?

    Forgive the dumb question Rainbow, but of what use is it to look at the Mavericks OSX 10.9 related information if I am on Yosemiti 10.10 ? 
    I've read the information, but if the solution is jsut Apple software updates and I am running different software how will that help me ?
    As feedback, it seems a bit slow of HP to not have drivers that can be used with Apple's new operating system given so many people use macs. Do you know when this will be available and HP will make the necessary updates ? It's certainly not ideal to have a hardware product that works really well, but is not able to interact with my computer because of no updates to optimise for the latest operating system.

  • HP Deskjet 3050 All in One Mac not working w USB or Wireless

    I have tried to setup my nen to me printer both via USB and Wireless connection. The computer did locte the priinters wifi signal but that was as far as i could get with that. The USB connection was a little better but when I added the printer there was not an option for the software matching the product number so i used the generic. Once setup I have tried to print and the printer icon comes up momentarilly then  disapears. I am lost. Help please!!!

    Hello there! Welcome to the forums @colemanthompson ,
    I understand you are running into troubles when connecting your Deskjet 3050 to your Mac. I will certainly do my best to help! Please first respond to me with which Mac OS X you are running.
    Thank you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP PSC all-in-one printer not working

    I reinstalled the driver cd disc, rebooted, corrected the printer default connection.  I've unplugged everything.  Printer doesn't work. It just stopped, but then sometimes it will print.  Never jammed.  I use power surge protectors high quality.  All network connections working.  I can hear the printing but nothing prints.  Printer will print self-test but that's it.  I noticed that the model number for the printer may not be correct in properties but can't figure out what the model is and how to correct the entry.  Hmmm -- any ideas please? 

    According to http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=3 74575&sw_lang=&os=219&#N701 there's no software, but only a driver that supports SL printing, but not scanning.

  • Hp Photosmart C7280 all-in-one will not work with Snow leopard

    My nephew just installed Snow Leopard on my IMAC 2008. I cannot get to printer to work. I have tried uninstalling the HP software and reinstalling. I have updated the software thru Apple updates. It still won't print or scan any documents.

    I would recommend these instructions (they don't hurt anything), however, different circumstances require different solutions.:
    Try deleting the printer .plist files and see if that helps.
    Go to ~/Library/Preferences and move the following files to the Trash.
    com.apple.print.add.plist
    com.apple.print.custompresets(your printer manufacture name).plist
    com.apple.PrinterProxy.plist
    com.apple.PrintingPrefs.plist
    Restart your Mac.
    Carolyn

  • Hp psc 1200 all in one printer not working

    I reformatted my disk after downloading Yosemite, as some programs were very slow to respond.
    My colors in laptop MacBookPro were washed off!
    Now after downloading new Yosemite software, my printer is not getting recognised!
    Drivers from HP site don't work too.
    Any good advice is required.
    Thanks

    According to http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=3 74575&sw_lang=&os=219&#N701 there's no software, but only a driver that supports SL printing, but not scanning.

  • My keyboard does not type at all and the trackpad not working properly

    Hello everyone,
    Today I realised that my computer does not type any letters at all and everytime I try to write something the trackpad works only as if I was pressing the right button (two fingers). After a while the trackpad starts to work again as it should. I have noticed that the trackpad does this when I try to write something. Don't know what to do and this macbook air is quite new and I cannot surf on the internet, write essays and I cannot log in with my password. Sometimes the only letter that works is the "o" and the others do not show up and it makes a sound. I have realised that if I press some of the other letters it can also erase some of the text already there.
    Thank you in advance.
    Kind regards.

    It sounds like you have a stuck key or some other malfunction.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

Maybe you are looking for