Help, my iPad working by him selves. It write by it selves and open and close window uncontrolled

I Have tried to reset and restore and set it up as new

If you have tried those three things and the iPad still doesn't work properly I suspect you might have a hardware problem with your iPad. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. Be sure to backup your iPad if you can, before taking or sending it to Apple.

Similar Messages

Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

TS3212 ipad typing and opening and closing files on it own

ipad typing and opening and closing files on it own. how is this fixed

We tried that - it didn't work. We have phoned the nearest Apple store, where we bought the tablet. I see another 125mile excursion in our near future.
PS- When we phoned Apple support, we struggled to explain ourselves to a call center employee who simply could not understand American English. Apple, many large companies stopped using call centers in Mumbai because of the language difficulty - you should too.

Sometimes when working in an open tab it suddenly pops out and opens as a window. Very frustrating.

I usually have 4 to 6 tabs open at a time. I start with gmail, facebook, twitter and igoogle and add more as I'm working.
Sometimes though, the tab I'm working in FB or gmail or other, will suddenly leave the window with multiple tabs and open a new window with just the site I was working in.

Hello khoopes, how often is that ? do you have it soon enough , like one time in ten clicks on a tab ? can you check it in safe mode ?
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
thank you

My macbook is going to sleep while I'm working or viewing something. I will sometimes have to open and close it several times to get it to "wake up" again. Any suggestions?

my macbook is going to sleep while I'm working or viewing something. I will sometimes have to open and close it several times to get it to "wake up" again. Also, no sound comes out of my Macbook. I only hear with earbuds or headphones. Any suggestions?

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Triple-click anywhere in the line below to select it:
syslog -k Sender kernel -k Message CSeq "Previous Shutdown" | tail | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

JavaScript and "Open In New Window" not working.

I've been using Safari 5 since it came out and there were no problems. But recently my JavaScript has stopped working. Whenever I click on a link that is supposed to run a script nothing happens. Similarly when I click a link that is supposed to open automatically in a new window, nothing happens. I've tried reseting Safari but that did not help. I had this same issue with Safari 4 and the update to 5 solved it, but now I do not know what to do.

HI and welcome to Apple Discussions...
From the Safari Menu Bar click Safari/Preferences then select the Security tab.
Make sure Java is enabled.
And, from a Finder window select your Home Folder in the Sidebar on the left. Then open the Library folder, then the Caches folder, then the com.apple.Safari folder. Move the cache.db file to the Trash.
Relaunch Safari. If you still have problems, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop.
Relaunch Safari and see if that makes a difference. If not, move the .plist file back to the Preferences folder. If Safari functions as it should, move that .plist file to the Trash.
I had this same issue with Safari 4 and the update to 5 solved it, but now I do not know what to do.
If nothing above helps, install the v10.6.4 Combo Update
Then repair permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and *restart your Mac*.
Carolyn

When I try to update apps on my iPad mini, I tap the "Update" button, but the app just opens and doesn't update.

I have an iPad mini, 16G, WiFi only. My operating system is iOS 7.0.3. My problem is that my App Store has stopped updating apps. And it's not like the update starts, but never finishes. It doesn't start at all. I touch the "Update" button, and the app opens instead of updating. I have 9 updates now, and none of them work. And the rest of the App Store is working fine. I have no problems searching for apps or downloading new apps. It's just the updates that don't work. I had thought that maybe I needed to update my software and then it would start working, but I can't. The available software update requires 5.9G of storage, and I only have 1.6G. I also thought that maybe there was not enough forage to update the apps, but if that was the case, then it would tell me that there is not enough storage instead of opening the app. Does anyone know how to fix this? I really need to update my apps!

Hey there nstephanie0625,
It sounds like you are unable to update your apps in the App store because they launch, rather than update. I would recommend starting by signing out of your Apple ID in Settings:
iTunes: Using the iTunes Store for iPhone, iPad, and iPod touch
Settings > iTunes & App Stores > Create New Apple ID on your device.
Then quit all the running apps on your phone:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
Thank you for using Apple Support Communities.
Regards,
Sterling

Why is Numbers on Mac OS X 10.10 not opening files was working about a week ago, my iPhone numbers is still opening and working with the files?

This is what message I get when trying to open on my Mac OS X 10.10 (The file “Record of Work Nov28-Dec11-2014.numbers” couldn’t be opened), which the same file that can be opened from my IOS 8.1 iPhone.
Seriously *** gives

The most likely reason you can't open this file is that you are using an old version of Numbers. It's easy to accidentally attempt to open your document with the previous version (V2).
In rare cases, the document can be corrupt and your only recourse is to grab a backup copy.
Jerry

Report developed in 6i and open and run in 10g, Web Layout is not working

Hi,
Initially reports were developed in Reports 6i now we need to convert into 10g. I just opened the .rdf in Reports10g. Report is successfully running in paper layout and showing the data. But when i try to run the report in Web Layout im getting a BLANK INTERNET EXPLORER SCREEN. Why is it so? What should i do to run my report successfully in Web Layout? When i see Web Source, i am seeing the below code,
<%@ taglib uri="/WEB-INF/lib/reports_tld.jar" prefix="rw" %>
<%@ page language="java" import="java.io.*" errorPage="/rwerror.jsp" session="false" %>
<%@ page contentType="text/html;charset=ISO-8859-1" %>

<html>
<head>
<meta name="GENERATOR" content="Oracle 9i Reports Developer"/>
<title> Your Title </title>
<rw:style id="yourStyle">

</rw:style>
</head>
<body>
<rw:dataArea id="yourDataArea">

</rw:dataArea>
</body>
</html>

Please, guide to achive the Web Layout Report.
Thanks & Rgds,
M Thiyagarajan

Hello,
The answer is in the Migration FAQ :
When I open an Oracle6i Reports Developer report in the Oracle Reports Builder 10g and run my Web layout, I get an empty Web page in my browser.
http://www.oracle.com/technology/products/reports/htdocs/faq/faq_migration.htm#368
Regards

Finder is not working properly mac osx 10.7.4 it no longer launches a new window when I click the finder icon - I have to right click and open a new window

Hi
Just recently Finder has stopped behaving as it normally would. Clicking the icon doesn't seem to launch the finder window. I have to right click the finder icon and then click New Finder Window. Sometimes there is no response for sometime and then finally it does open a window. If I click finder when a wondow is open it does not shift focus to finder anymore. I am sure this did not use to be the case?
PS. not sure if this is how to put things on the forum as haven't used them before!
Julian

Click on the spotlight icon in the top right of your screen (looks like a magnifying glass), type
Terminal
and press 'return'.
In the window that opens up, paste or type this exactly into the window
killall Finder; killall Dock
(that's case sensitive) and press 'return'.
You'll notice the Dock disappear for a second or two then return, as do any open Finder windows.
Test using Finder as normal. Same problem?

Help my ipad screen! It's glitching really bad.

Himplz help. My ipad screen is glitching like going up and down, TYPING itself, and opening and going out of apps. I've tried cleaning it, and reseting it but nothing has worked. I know I should go to the apple store but before that I want to fix it myself, I haven't told my parents, and they just bought it recently as a birthday present, they won't be happy at all. This same device got cracked earlier but we got it fixed, and it was working fine, for a few weeks but now it happened all of a sudden. I've tried deleting some apps but it's still doing it. THE MOST ANNOYING THING OF ALL IS WHEN I TYPE, IT TYPES ONE LETTER MULTIPLE TIMES. Anyone that helps, it's greatly appreciated, a lot! All ideas welcome. ASAP PLZ,. I WAS ALSO WONDERING IF ITS THE SOFTWARE OR APPLE SYSTEM ITSELF. Is anyone else having the same problem?

Hi there Pleasehelpme101,
You may find the troubleshooting steps in the article below helpful.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
-Griff W.

My touch screen does not respond to my "slide to unlock". reset does not help. iPhone 4S works otherwise.

my touch screen does not respond to my "slide to unlock". reset does not help. iPhone 4S works otherwise.

I cannot use it. I can get calls and text messages but I can't respond because the screen is locked and I can't "slide to unlock" because the touch screen does not work.

IPad works, but display remains black! Fixed now.

Hi, this isn't a question but a maybe solution in case anyone else is experiencing this issue I just experienced.
The iPad worked but the display showed nothing. The backlight came on and if I took a screenshot it would momentarily show what was onscreen. Tried to fix it with the usual methods - Reset. Restore. DFU mode. Restore again. No luck. Eventually I just slapped it hard on the back and it worked

Basics from the manual are restart, reset, restore from backup, restore as NEW. If you try ALL these steps and your phone still doesn't function properly, you'll need to bring it to Apple for evaluation and possible replacement.

I use v20.0.2, and restart using same windows and tabs is NOT working. I have deleted profile and restarted, etc., but nothing seems to work. What now?

Not sure what else that I can provide here. This particular software function does not seem to work.

In case you are using "Clear history when Firefox closes":
*do not clear Browsing History
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created
If you use cleanup software like CCleaner then check the settings for the Firefox application.

Help, my iPad working by him selves. It write by it selves and open and close window uncontrolled

Similar Messages

Maybe you are looking for