Help! My iPod is corrupted and i don't want to lose my data.
When i connect my iPod to PC its screen normally shows "do not disconnect" and it's charging, but when iTunes starts it only reports: "iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting iPod." i tried reconnecting iPod many times, rebooting system even reinsalling iTunes but with no effect. When i try to open iPod disc from My Computer it only says that: "this disc is not formatted, would you like to format it now?"
I just don't know what to do... Is there any chances i can fix this problem some other way that using the "restore" option in iTunes and losing all my data? Some of them are priceless to me. Please help.
Athlon XP 1700+ Windows XP Pro
Generally, if you need to Restore, the data is pretty much gone on the iPod.
ve got there some important data which i don't want to lose
And since this data is important, you do have it on the computer and backed up on CD/DVD also, correct?
Similar Messages
-
IPad 2 went in Recovery Mode and I don't want to lose my data
Well, hello.
I have a big problem with my iPad2. From the begining: I wanted to update the iOS to 7.1.2. The progress bar appeared and I left it like that. When I returned, it showed me that I have to connect the device to iTunes. When I did this, it said that I have to restore it. The big problem is that I don't have any back-up of my iPad. I had, but my old laptop broke and I can't open it anymore. So I got a new laptop (Windows 8) and never connected the iPad to it, only now, when it is in Recovery Mode and... I tried to hold the Home+Wake up button both pressed in the same time, but still no change: the Apple logo appears only for a few seconds and it goes back to the Recovery Mode screen. I also downloaded TinyUmbrella from here: http://tinyumbrella.en.lo4d.com/ but nothing happened (it appeared something like TinyUmbrella: Verifying libraries, reticualting something). I also contacted the service in my country, but they said that nothing can be done, I have to restore it and, by this, erase all the data on it. Please, is there any way in which I can save the data? I'm more than desparateYes, I know... I discovered now that I have saved the photos I wanted from it long time ago (for the same reasons, i didn't wanted to lose them). So I'm kind of saved. Also it has been like crap because the laptop where I had my backups is as dead as can be. That was the moment when I panicked. From now on... I'll back-up it everyday. Thank you a lot!
-
In updating my iphone 5 for the new software ios6. An error occurred and now is asking me to restore settings. But I don't want torestore setting causing not all of my recent data has been synced and I don't want to lose my data. How can I undo this since i did not hit restore settings, yet i can't do any other move without restoring at this point. Any ideas?
You phone is in recovery mode. Your data is already gone.
Why you would attempt a software upgrade without backing up all your data first is beyond me, but to each his own.
In any case, sorry for your data loss. -
My ipod has always been synched to this computer...and I don't want to lose anything.
It doesn't say anything. It runs through the sync process like normal and tells me all of the songs that it's synking. But then when it says I can disconnect it, nothing actually synked.
-
I have tried to update 6 apps but they are all frozen .
They either say loading or installing but are doing nothing. I would delete them and try to reinstall, but one is no zombies allowed and i don't want to lose the game I. Have built up, can any one help a novice???Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended. Firefox 3.6.18 would be the safer choice.
Here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 5.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details. -
I want to sync my ipod touch with my new computer. But I don't want to lose any data from my apps.
I want to sync my ipod touch with my new computer. But i don't want to lose any data from my apps. If i erase and sync does it only erase music and videos or does it include apps as well? I specifically don't want to lose any data from Instagram, I don't want to have to start over. Any help is greatly appreciated Thanks
Copy everything from your old computer to your new one.
-
TS2529 My phone is in recovery mode and I don't want to lose everything
My phone is in recovery mode and I don't want to lost my data, etc.
All I did was try to update the phone and I forgot to do a backup before hand.
It's telling me before I can use itunes, I have to restore to factory settings. I can't lose my stuff.
Can someone help please?
Right now it's showing an itunes icon and a usb on my phoneOnce the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414
Restore from Backup
http://support.apple.com/kb/ht1766 -
I have a new PC and need to sync my iPhone5 to the new installation of iTunes. I don't want to lose the data on the phone! How do I do this? The PC is Win8 Pro.
If you have the old PC, transfer the library from it. If not, see Recover your iTunes library from your iPod or iOS device.
tt2 -
I have the i phone 3G version 3.1.3. I am currently upgrading to the i phone 4 GS and want to transfer all data from old phone!
Unfortunatly my 3G will not sync to i tunes :( and I don't want to lose all my photos etc!
Can anyone help ?You will need to backup your old 3G and then restore your 4 to that backup. Here's a more detailed instructions
http://support.apple.com/kb/HT1766
also you should be importing your pictures over to your PC as you would a digital camera see here how to
http://support.apple.com/kb/HT4083
I'm not sure what you mean by sync? is the phone not being recognized by your computer if so see here
http://support.apple.com/kb/TS1538 -
I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694 -
How do I add the USA store. I am logged in to UK store for past purchases and I don't want to lose them.
It is semantics, but most of us from the Americas consider we are Americans by virtue of the continents of our birth, as are folks from the other continents residents of that continent*. The word for folks from the US in Spanish is estadounidense, United Statesonians. In my mind I am soon to be Statesonian.
*Aside from the fact that there is but one country on the continent of Australia and that the majority of Antaricans are penguins! -
How do you unlock a disabled ipad mini? I have my notes in Notability and I don't want to lose them. I know my passcode but I left my keyboard on and it disabled it.
Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
However... Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Jessica Sanchez wrote:
I am installing itunes to a laptop and have not sync device to this lap. ...
Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue. -
What is the best way to copy a DVD I made from iMovie? It was HD720 and I don't want to lose any quality in the copies. I need to distribute it to about 20 people. It's 42 minutes long.
You will need to save it as a video to the camera roll.
Import it into windows as you would a photo.
Then purchase DVD authoring software, and create a DVD. -
I need to format my pc and i don't want to lose my downloaded add-ones so,,, what i have to do?
i need to format my pc and i don't want to lose my downloaded add-ones so,,, what i have to do?
There are a couple of tools you can use to backup your Firefox user data including extensions. The first is FEBE, which is an extension that allows you to backup your entire profile (location where user data is stored). The second is MozBackup, a free application for backing up Mozilla profiles.
* https://addons.mozilla.org/firefox/addon/febe/
* http://mozbackup.jasnapaka.com/ -
My music goes to iCloud and I don't want to use my data to download it continuously. How do I keep it on my device and out of iCloud?
Donnakelley62 wrote:
I don't know. And no I don't use iTunes match.
WE are travelling and it seems every time I want to listen to music it's on iCloud and not my device. I find a wifi connection and download the songs them bam next time they are back on iCloud!
iTunes purchases are always on iCloud. They don't get uploaded there. They are simply there because you purchased them.
When you first purchqse, iTunes (computer or phone) should download them. If they are not downloaded, you will see the cloud icon.
Maybe you are looking for
-
How to make fields editable in an custom enhancement
Hi Experts, My requirement is to perform some custom validations against a field FKONT(BSEG) at the line item level of FB60 and display appropriate message and make the incorrect field editable. I have implemented an implicit enhancement point in inc
-
Seit dem letzten update kann ich itunes nicht mehr starten. Fehlermeldung: nicht gefunden MSVCR80.dll und error 7 (Windows 126)
-
How to make a value set dpepenedent on other value set's values
Hi, I want to have two parameters on my report in oracle apps. I made one Value set which is 'Table' in Validation Type, now I want the other value set dependent on this previous value set's values, Is there a way to make it possible. Regards, Nidhi.
-
How to create Pipeline on Runspace
Hi Please let me know how to create Pipeline on Runspace and also give me an example with C# code .
-
File transfer from PC to MAC need help on wiring
I posted a topic a while back but never was informed on how to actually hook my wires up. my topic before was here http://discussions.apple.com/message.jspa?messageID=8104371 can someone please tell me how to connect my two comps to my network? I hav