Help! My ipod nano has a white screen and won't unfreeze!

I have tried holding down the menu and the centre button, but the apple screen doesnt appear, it just stays blank. If you tilt it in a certain light, you can see lines, and the music plays when plugged in the docking station, so something is there, and i have also restored to factory settings on itunes, but its still a blank white screen

Try holding down the power button on the top with the home button in (round one) wait about 10-15 seconds to see if the apple logo comes up>if it does let go if it doesnt >open iTunes on computer plug iPod in & se if iTunes see's it. If it does restore AS NEW> if it doesnt try remove iPod from computer but leave cable connected to computer hold down round button & connect again Keep round button held down wait about 15 seconds & see if you see the iTunes symbol on iPod with usb cord>if you do keep the round button held down & wait for iTunes on computer to give you message to restore>restore ...If symbol does not show up & you are not able to restore device will need to be replaced

Similar Messages

  • My ipod nano has a white screen and beeps twice, Can i fix it?

    I left my ipod in my pants and they went througth th washer and dryer, I put them in white rice for two days and it still has the white screen and beeps twice, Can i fix it?

    Hello Emmuhhlieee,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    Display shows a white screen
    Try putting the iPod into disk mode:
    Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
    When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
    While the device is in disk mode, sync it to iTunes and try to restore.
    Best of luck,
    Mario

  • My ipod nano has a white screen and after i restarted it it beeped twice

    what does this mean i mean after looking on the internet for hours now i got no help what so ever, helpp please

    Hello Emmuhhlieee,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    Display shows a white screen
    Try putting the iPod into disk mode:
    Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
    When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
    While the device is in disk mode, sync it to iTunes and try to restore.
    Best of luck,
    Mario

  • My ipod touch has a white screen and I am unable to reset it.  Can anyone help?  I

    Hi...  any help would be appreciated.  My iPod Touch has a white screen.  I have tried resetting it following the directions on Apple's site and have not been successful.
    Can anyone help?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My ipod touch has a white screen and it wont turn of

    I was playing a gamem and all of a sudden the screen turned white! it wont even turn of. I tryed to put it into Dfu mode and held the top button to it didnt work. so right now i left the ipod on with the white screen and i hope it will run out of battery. So can u please reply to me as soon as posible. Thank you

    Problem is I can't restore via iTunes, because when I plug the iPod touch into my laptop, it states it doesn't recognize the device - "USB device not recognized".  iTunes has no device listed for my iPod touch.
    It was plugged in all day while I was at work, could that be the problem?
    I tried to do it with the DVU method and it didn't work either.

  • My ipod nano has a white screen, how do i fix this?

    My Ipod nano has acted weird for the past week, then yesterday the screen goes white!! I don't know how to fix it or what to do.

    If a hard reset of the device or a restore of it via iTunes does not resolve the issue, it's likely hardware related.  Could be a damaged LCD or a loose ribbon cable that connect to your iPod's logic board.
    Either way, your iPod will need servicing in order to gain full functionality of it.
    B-rock

  • HT1572 my ipod touch has gone white screened and it doesnt do anything, what can i do ?

    My ipod touch has gone blank with a white screen and it doesnt do anything, what do i do ??

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • My mac book pro has a white screen and won't start up

    My Mac book pro has been running slow, so I thought I would shut down and reboot. It wouldn't reboot past a white screen and an apple logo. I have rebooted several times and after an hour or so it still won't go any further. Any suggestions?

    Howdy Lowana42,
    Welcome to Apple Support Communities. 
    It sounds like your MacBook Pro has a startup issue that is causing it to only display an Apple logo. Try the suggestions in the article below, they will resolve most issues like this one. 
    How to Troubleshoot iSight
    I hope this helps, 
    -Jason

  • HP Photosmart Printer 6520 has a white screen and won't go away?

    My HP photosmart printer had been working fine until I turned it on today and it showed a blue screen with a power off/on symbol and quickly flashed to a blank white screen and hansn't changed since.  I've unplugged it and plugged it in several times and it still does the same thing. I even left it unplugged for a while and plugged it back in and it still did the same thing? How do I fix this problem?

    Hello imb1999,
    I see the screen on your HP Photosmart 6520 has gone white and you are not able to access the front panel guide. I would like you to take a look here: The HP Printer Won't Turn On or Respond, I know it turns on just the main screen is white, but the I need you to do all troubleshooting steps listed in this document to try and resolve the problem.
    If after the troubleshooting has been done with no success, I suggest calling our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • My wifes Ipod Nano has blank white screen but still works

    As the topic says, the nano has a blank white screen but still plays songs and works with iTunes. i have tried reseting it via holding menu and select for 10 seconds without success also i have tried holding select and play/pause after reseting (hard reset i guess) without any success.
    I have tried restoring factory defaluts and loading different versions of iPod update without success.

    You can check you service options here: Apple - Support - Service Answer Center

  • My new iPod touch has a white screen and does not reset

    Just bought a new iPod touch and I got a white scree and cannot turn it off. I have tried reset via the power and home button but still have the white screen.
    Is there a quick fix or should I just return it under warranty?

    mgerace wrote:
    Just bought a new iPod touch and I got a white scree and cannot turn it off. I have tried reset via the power and home button but still have the white screen.
    Is there a quick fix or should I just return it under warranty?
    Don't mess around with it.  Return it.

  • My iMac has a white screen and won't power up

    When powering on my Mac, I get a white screen with apple logo and the circular progress icon (not the color pinwheel), it's been doing this for about 15 min. Suggestions????

    The dark gray Apple is loaded off your Hard drive. So you can assume the Hard Drive mechanism is somewhat working.
    You can try Booting is Safe Mode, which attempts one round if Hard Drive Repair and then starts with minimal extensions loaded.
    The simplest task is to boot with the Option key held down. This should show a screen with an Icon for each bootable drive.
    If running 10.7 choose Recovery HD, choose your language and run Disk Utility. Select your Hard Drive and Repair Disk.
    If running 10.6 insert the Installer DVD, select it, boot from it and choose your language. Choose Disk Utility from the Utilities Menu. Select your Hard Drive and Repair Disk.

  • MY IPOD NANO has a blank screen and wont turn on!! HELP

    My ipod screen is blank and it seems to be frozen that way! I've tried charging it overnight. Yet, in the morning... no results. I cant reset the ipod because it can't be turned on. I've checked the hold button and that's also good to go. Help!?!?

    Have you seen these articles?
    iPod won't turn on
    iPod stops responding or won't wake from sleep
    -Kylene

  • My Ipod suddenly has a white screen and will not turn off.  What can I do?, My Ipod suddenly has a white screen and will not turn off.  What can I do?

    My daughter was playing on her Ipod Touch when the screen went white.  It will not turn off or do anything.  Has anyone else had this problem and know what may work?

    The same thing just happened to my new ipod today while i was trying to use an app. A lot of people say that it is caused by an ios update, but I let the battery on my ipod drain until it turned off.  Once i charged it, it turned on and is working normally again

  • My ipod touch has a white screen and is boiling hot what do i do?

    So i was on facebook and all of a sudden my ipod touch screen froze, i clicked the home button and the screen turned white, i've left it to drain the battery but its still white and i touched the back and its boiling hot like burning hot. Going on a trip tomorrow and really really need my ipod touch for the trip. i've tried plugging the ipod into the computer but its not recgionzing it...
    It's a new ipod touch in white the fourth generation one..
    Any ideas what to do??
    Thank you,
    Amelia Smith.

    Try a hard reset.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

Maybe you are looking for

  • Why is Import Video greyed out for a new Flash project?

    I have been trying unsuccessfully to load any MP4 (H.264 encoding), FLV, or F4V files into a brand new project. I've tried importing FLV and F4V files via the Import to Library and Import to Stage menu choices but all result in "One or more files wer

  • Power Map doesn't display in ribbon

    I installed Power Maps Preview and the add-in is active, but it doesn't display in the ribbon. I unistalled the program several times and re-downloaded it, but it still does not work. Many of the discussion threads on this topic contain dead links fo

  • Edit MSS 60.1 iView

    Hi, EP: 6.0 SP14 SAP: 4.70 X200 MSS : 60.1 I need to make a couple of changes to the standard worksets. NWDI is not configured. So can I simply install NWDS and make the required changes to these iViews by importing the PAR files and adjusting them,

  • Missing end sub, but where ?

    Hi, I'm creating a script that will, when a technician send a mail to a client, the affiliated commercial will be put in copy. My code looks like this :  ThisOutlookSession Private Sub Application_ItemSend(ByVal Item As Object, Cancel As Boolean) 'By

  • Disk Space Error Message

    When I try and edit a photo I get an error message that there is not enough disk space. I've deleted all of the unedited versions of my pictures, but still get the same message. I imagine it's due to the size (they are currently 2304 x 1536)I'm impor