Help, my iPod Nano just stopped working
Help I've had my iPod nano 7th generation for about 6 months now. It's always worked fine until one day after charging it, it will no longer turn on. It does get hot when I try to charge it or reboot it (reboot using the home and on/off button together). Can anyone please help?
Hi AliPe!
I have a website that I believe will help you troubleshoot this issue. The website is an iPod troubleshooting assistant, and it can be found right here:
Apple - Support - iPod nano - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/assistant/itunes/
Just follow the troubleshooting steps suggested by that website and you should be on the right track. Take care, and thanks for visiting the Apple Support Communities.
-Braden
Similar Messages
-
my ipod nano just stopped working right after playing a song, any suggestions to get it back working?
Did the battery run out of power? If not, try doing a Reset to "reboot" the iPod
http://support.apple.com/kb/ht1320
(A Reset does NOT erase the iPod.) -
My 6 gen nano just stopped working, but is recognized by iTunes
Although fully charged, my 6th generation nano just stopped working for no apparent reason, but is still recognized by iTunes. It was purchased only 20 days ago and used 3 times. What can be done?
Read the PDF manual: iPod nano (6th generation) - User Guide
-
My IPOD Touch just stop working - I was listening to music and it stop. I cannot power it down or re-start it. The time is correct and that is I can see at the top of the screen of the IPOD along with the battery info
Try resetting:
Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. -
My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it
If you do not find a solution in the iPod nano (6th generation) - User Guide, suggest that you call AppleCare if still under warranty or take a trip to your local Apple Store or AASP.
-
My ipod touch just stopped working! how do you restore?
I was playing a game and my ipod touch just stopped working! How do you restore it , as of now it has a bright white screen and won't power off or even connect to my computer.
Try restoring via iTunes. If necessary. try placing the iPod in recovery mode using one of these programs and then restore:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too -
My ipod classis just stopped working. It is still under warranty and I need to know where the warranty information is so I can get it fixed or replaced?
If you have tried all of the suggestions mentioned under the appropriate section in this Apple support document, you may need to have your iPod serviced or replaced either by Apple or a third party service.
iPod won't turn on
If the iPod is still under Apple's 1 year warranty against manufacturing defects, Apple may swap it out for you at no cost if they don't conclude the issue to be the result of abuse or accidental damage. If you have an Apple Store nearby schedule an appointment with them and show them what you are experiencing.
http://www.apple.com/retail/geniusbar/
B-rock -
Nano just stopped working???
My ipod has just stopped working. I was listening to it this morning and there was more than enough charge in it. I go to turn it on now and nothing, checked to make sure it was not locked and still nothing. Connected it up to the computer and it doesn't even see it as and external device - it's just dead. I only purchased this ipod less than 60 days ago. I did have a weird thing happen about 2 weeks ago as well.......the music stopped and all the pictures were scrambled lines all the graphics on the ipod were gone. I did manage to reset and re sync with my computer that time, but I'm thinking maybe I got a lemon? How do I go about getting this issue resolved? Looking forward to anyones suggestions. BTW I did try to take it back to Walmart where I purchased it and they won't take it back after 10 days what a bunch of crap.
Just got this from some else's question about a dead ipod and this worked...Thanks glad I visited the site.
You may need to reset it. So first thing to try is...
Put the hold switch to the OFF/White position. Now toggle it ON/orange then back off again. Then press and hold both the MENU and center buttons on the iPod and hold them for a good 15 seconds or so. Your iPod should reboot starting with the Apple Logo screen.
If it doesn't work the first time, give it a second or third go. Sometimes it takes a few/several tries.
See this thread as an example of what I mean by needing to try it many times...
http://discussions.apple.com/message.jspa?messageID=5065208
http://www.apple.com/support/ipod/five_rs/
Patrick -
MY USB cable and Ipod Nano has stop working while I was dowloading a CD to from my computer to Itune. Error message is a Unknows Devise. Unable to turn on Ipod nano
Hello hjoan
Check out the article below to troubleshoot issues with your iPod showing up on your computer and in iTunes. It will give you multiple options on troubleshooting the issue.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Regards,
-Norm G. -
my iPod nano has stopped working. It is fully charged. I have tried to reboot and restore, and it still isn't working.
What do you mean it is not working? Does it power on? Is it recognized in iTunes? Need a bit more detail in order to assist you here.
B-rock -
My ipod touch just stopped working
My Ipod 4th generation just stopped working - not turning on
Basics from the manual are restart, reset, restore:
iPod touch User Guide (For iOS 4.3 Software) -
My ipod mini just stopped working
my ipod just stopped working all of a sudden. ive tried charging it and connecting it to my computer but it just wont knock on.
ipod mini Windows 2000william,
See these.
iPod won't turn on.
iPod battery doesn't charge. -
somebody help me!!!!! i have had my ipod touch for less that 2 months and it stopped working. it was working 20 minutes ago but now i cant turn it on or anything. i tried to hold down the home button and the power button and nothing happens. HELP PLEASE!!!!!!!
yes dosent work anymore
-
My ipod nano just stops and now its dead
ipod nano 7th generation just went dead, black screen
Hey there jean-yves1961!
I have a link here for you that can help you troubleshoot this issue:
Apple - Support - iPod nano - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/assistant/itunes/
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
My ipod touch just stopped working, it wont turn on/off or charge.
I was checkin my ipod n it just stopped...It doesnt turn on/off wont charge it doesnt do anything..Any suggestion on how to fix it please?
Those symptoms are covered here:
iPod touch: Hardware troubleshooting
Maybe you are looking for
-
3 Reasons Safari is not my default browser, yet.
Unfortuntately, Chrome is still my preferred browser, regardless of my desire to maintain the Apple ecosystem. Here's why: Prevention and Recovery: I'm on of those shortcut gurus. I use the 'Cmd+W' and 'Cmd+Alt+W' religeously. So there are times wh
-
Cannot sync apps / app icons distorted - if system language is non-English
1. If I select Russian(my native language) as the system language, the Apps section/tab does not appear fully when I click on it. The Apps tab is selected, but it shows the contents of the Summary tab. I cannot sync apps with my iPhone. 2. The icons
-
TV Overscan option is shaded out on nvidia-settings - How to fix it?
I had this problem before already, but I forgot what I did to able to change nvidia-setting overscan option. At the moment it is shaded out so that I can't change it. What can I do? Nevermind... I kind of solved it. I didn't have to do it for this tv
-
Table T1 in Schema A, Synonym T1 in Schema B, View V1 in Schema B.
Hi, There are two schemas Schema A and Schema B Table-> XML_TABLE is in Schema A. If I create a view V1 with the following query: SELECT * FROM XML_TABLE t WHERE XMLEXISTS ( 'declare namespace nmsp ="name:namespace"; fn:collection("oradb:/PUBLIC/Tabl
-
Binary to Voltage Conversion of encoder data on cRio 9073 using FPGA
I am using FPGA with a cRio 9073 to acquire torque and absolute quadrature encoder values. It says in the FPGA instructions that the documentation for the 9073 should include the binary to voltage conversion, but when I looked at the documentation, i