HELP!!!.My.ipod.wont.stop.showing.the.apple.logo
My.I.pod.video.wont.stop.showing.the.apple.logo.
Cause.the.ipod.wont.stop.shutting.off.and.turning.on.
Ive.tried.to.reset.it.but.it.wont.work.and.my.computer.cant.recognise.the.iopd.c ause.the.ipod.wont.stop.shutting.off.and.turning.on.
Windows XP
Two things first:
One posting is usually sufficient.
and
Please use spaces instead of periods. It is easier to read and word-wrap with spaces.
Regarding your iPod problem:
Start with The Five R's
Similar Messages
-
I really need help this has happend 5 hours ago and the ipod os still showing the apple logo and the buffering icon below it!
It re booted several times till now.
Need help fast!- I suspect that he went to Settings>General>Reset>Erase all content and settings. For 1G or 2G iPod that can take hours and it will likely stall out if not connected to a charging source.
Try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The connect to computer and try to restore via iTunes.
- Id something is still showing onthe screen, disconnect from computer/charging source and let the battery fully drain. After charging for an hour, Try the reset and restore.
- If you can turn the iPod off, se if placing the iPod in recovery mode and then restore. For recovey mode:
iPhone and iPod touch: Unable to update or restore -
My ipod turns on shows the apple logo, then turn into a white screen until it dies.
I was updating my ipod and it was almost complete, it restarted and the loading bar under the logo stopped. Then the ipod restarted again and now when it turns on it shows the apple logo, then turns into a white screen until it dies. After I charge it again it does the same thing automatically. Ive tried to restart and restore it but it wont work. What do I do? I've tried all the troubleshooting and nothing is helping. The screen is also cracked, this wasnt the cause because it worked fine for 3 months after it was cracked.
See if placing the iPod in DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful that indicates a hardware problem. It could be that the damage started with the drop that also caused the cracked screen and the damage progress to the problem you have now. An example would a cracked that has finally progressed to it causing the problem. -
My iphone will not stop showing the apple logo and rebooting
How can i get my iphone 5 to stop rebooting and actually show my screen. All it does is show the apple logo and then its goes away and the screen stays on but shows nothing. I can triple click to invert colors but that only makes the black screen white. My lock button does not work either so i cannot hard reset
It appears you have a hardware failure. Certainly the lock button has failed. Without that button you cannot reset which is the first thing to try in cases like yours. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
-
My ipod nano wont stop blinking the apple logo!
I have an iPod Nano ( 4th Generation ) & after i take it off of the usb cord when its charging or when im syncing music it just starts flashing the apple logo over & over again , & after a while it blacksout . Any tips on how I can fix it ?
Hi Erika,
Welcome to Apple Support Communities.
It sounds like you have an iPod that isn't starting up normally, which needs to be restored or repaired. The article linked below will provide more information about the issue and walk you through possible resolutions.
iPod only shows an Apple logo and doesn't start up
http://support.apple.com/kb/ts1399
Cheers!
-Jason -
My iPod is continually showing the apple logo and won't turn on?
I've tried resetting but it has made no change and I tried connecting it to iTunes but the laptop couldn't detect it. Any help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod only shows the apple logo, and won't connect to my computer. what do i do?
My ipod touch only shows the apple logo, and i can't connect it to my computer. when i connect it, it doesn't show up in my itunes, or even in my computer. I was updating an app last night, and it wouldnt work, and it shut off.
If it is still charging using the adapter, let it charge for 10min, then connect in recovery mode, explained here:
iOS: Unable to update or restore -
Ipod only showing the apple logo and will not do anything else. 1st GEN
my ipod will only show the apple logo when plugged in to my computer i have a dell running xp but i have tried other computers and it will not do anything but show this symbol. my computer does not recognise that it is plugged in. ive tried the apple support fix-it but it does not do anything period. the buttons do not work when plugged in or not. the only thing it does is light up when plugged in. my other ipod works perfectly no problems so this leads me to believe that its not the computers i have used. just think the ipod has had it
Mine did the same thing last week after trying to update it via wi-fi. I then spent 11 hours Sunday updating my itunes on the laptop then restoring my ipod. Now all it does is beep as if it is just plugged in and flash the white apple logo. It beeps constantly. My computer at first didn't recognize it, then it did but said I needed to unlock it,(since I can't get the home screen up, I can't.) and now it doesn't recognize it at all. I've tried both computers.
-
my ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me
- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and try to restore.
- See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again. -
Can someone please help with my issue listed - My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo. Tried reset option/troubleshoot several times. Also wont show up on computer at all when I plug in to USB.
Any tips are very much appreciated.Place the iPod Touch into DFU mode. This will be similar to what the factory would do to install the iOS onto new iOS devices.
Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
To place your iOS device into DFU mode.
First connect you iOS device to you computer.
Open iTunes if not already open
Now turn off your iOS device using the power swipe.
Press the home and sleep button on your iOS device for 10 seconds.
Release the sleep button but carry on holding down the home button. For another 10 seconds.
Your iOS device should now be on DFU. Click on restore and iTunes will download the latest iOS for your device.
Hopefully that sorts it if not, you will have to go to a service centre or call Apple Care up and get them to collect it and repair it. (replace it) Or go into an Apple Store. -
iPad stops responding, showing the Apple logo only,i tried to place into recovery mode and attempted to restore again but after downloading the software, it brings error in downloading s/w message.can anyone help please.Thanks
http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
Ipod touch wont switch on and constantly only shows the apple logo screen
ipod touch wont switch on and constantly only shows the apple logo screen. Have tried to reset by holding both buttons down but hasnt worked. it also doesnt appear on itunes.
Hvae you tried:
- Reseting the iPod and then try restoreing the iPod
- Placing the iPod in recovory mode and then restoring the iPOd. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Please help me!My Ipod only show the Apple Logo :(
Yesterday,when i use my Ipod,i was reset it,but when the logo Apple show again,it can not go to the Menu so i was plug it to AC Adapter and put it into Disk Mode but when i plug it to my PC ,the Ipod was show the Apple Logo(not in disk mode)So what i need do to restore my IPOD????Please help me!:(
have you tried this
http://docs.info.apple.com/article.html?artnum=61584 -
I made a update to the ios 6 and now its just showing the apple logo and going off to black and repeating tat any help please?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod 2G doesn't turn on. It is out of battery, but when I connect it to my charger it just continues to show the apple logo. It did that for 3hours straight. Please HELP!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Error in Communicating with DCR Server LMS 4.0
I´m receiving this error when I try do add a device in isolated form or by discovery: Error in communicating with DCR Server. DCR Server may be down. Please start the DCR Server and then refresh the page. I am using windows 2008 standard server RC1 S
-
The first sheet coming out is always blank Also how can I have the pages come out 1-9 instead of
first page come out blank I want sheets to come out 1-9 not 9-1
-
How do I download from a portable drive to my new computer?
My hard drive crashed. The geek squad was able to copy the info (including my photoshop elements 3.0 pictures) onto a new portable Hard Drive. I bought a new PC.I have hooked up the portable drive to my new pc, and installed Elements 3.0 on the new P
-
Questiona bout a 15 inch screen for my powerbook g4 867mhz
i checked so many of the g4 powerbook screen's come with LTN152W5-L03 LTN152W4 and mine is a LTN152W3-L01 so i should get the same model..or i can get anyone as long as it's Titanium 15.2 ??? i need help thanks
-
I am messing around with the AVTransmit3 sample, and I'm trying to figure out how to display what I"m transmitting onto a JPanel. I have all the panel stuff worked out so it will add the player/processor visual components properly. The problem I am h