Help my ipods freaking out

Help my ipod is doing weird stuff. It froze for a few hours then turned off. when i tried to turn it back on an apple appeared and then a sad mac. I tired to reset it and put it in disk mode like the website says. It didnt work many times!!! Then a folder icon showed up. Then a sad mac followed by a batterywith (!!!). finally the apple now comes on the screen moves to the right (next song side) then it goes to a menu that says I RAM PASS, press play to continue. I pushed play and it looks like some kind of bios. I ran a test caLLED A2D TEST AND NOW IT WONT STOP TESTING HELP!!

reseting does not work. I press the buttons, Sometimes a sad mac comes sometimes a folder another time a battery when it fels like doing something different the apple moves and i get into the bios. I tried reseting restoring and putting in disk mode for about 30 hours now
I dont know where she won it can u tell from the ipod how old it is?

Similar Messages

HELP- Audio is freaking out in export when it sounds fine/looks fine in Sequence!

My project sounds fine while editing, but once I export, towards the end of my project the audio is freaking out in levels. It will be loud at one point and then quiet at another all in a matter of 20 seconds. I originally had mp3 tracks but I switched all to AIF so I can't seem to find the problem. Please help!

When you swtiched audio formats did you go through compressor or just render in the timeline.
bogiesan

Multiple problems, please help, I am freaking out.

Hey, so I've been waiting to get new ipod since the day the 5th gen was released. So yesterday, I go and I buy a brand new, in box, slate 5th gen off of craigslist. Problem is, I have no reciept, but it is still under warranty.
Now, for the devastating event that took place today:
So, while using the loop and taking a picture, the ipod slipped out of my hand. Luckily, the loop saved its life! Until it fell. The ipod on the ground, face down, with the loop sliding down my arm. The loop had slipped off of the button.
Now, there is a tiny little crack in the top right corner of my screen, and I am horrified to ever use the loop again. The crack does not get in my way too much, but it is just extremely upsetting since I bought it brand new, last night.
Would this be considered a defect, since the loop that came with the ipod, from apple, failed to work to its design? Or is it possible that there is a defect in the loop button? I have an appointment at the genius bar tomorrow, is it even worth going?

I di not understand that happened. I would make an appointment at the Genus Bar of an Apple store and make your case..
Apple Retail Store - Genius Bar

I updated my ipod touch 4 to the ios 6 and it updated but when I turned it back on it was the USB Itunes screen. I plugged it up to Itunes and tried to restore it but it wouldnt work it says its teh erorr code 3194. Please help I am freaking out ASAP

Can anyone help me please I am devastated!

http://osxdaily.com/2010/12/06/error-3194-fix-for-itunes/
Basic troubleshooting steps
- Hard reset instructions
- Manual restore instructions
- Hardware troubleshooting
- Repair options
- Preventive Maintenance
- Battery-saving tips
- Anti-theft & recovery tip
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Help itunes is freaking out my Ipod!

Whats going on everyone? I have a classic ipod model (the first with click wheel) and when I connect to my desktop it decides to disconnect and connect on its own. It does it the most of the time when I turn itunes on I can connect it to any other computer and don't have this problem. I've reinstall itunes and formatted my ipod so any further suggestions would be gladly appreciated.

Whats going on everyone? I have a classic ipod model (the first with click wheel) and when I connect to my desktop it decides to disconnect and connect on its own. It does it the most of the time when I turn itunes on I can connect it to any other computer and don't have this problem. I've reinstall itunes and formatted my ipod so any further suggestions would be gladly appreciated.

Help! G3 freaking out/kernel panic/memory problems

Hi All,
I put some pc 133 512 mb memory in my G3 [which is actually pc 100, but supposedly should work fine] and then it kernel paniced.
Now it mostly seems to recognize memory in the slot closest to the screen. But only 64 and 32 mb sticks.
Plus, it only boots to OS9 which is on a seperate partition to OSX which is where it is supposed to go, even after setting OSX as the startup.
It also always wants the time adjusted- perhaps the battery is flat- I put it all aside for a month after it happened.
Could the 512 MB pc 133 have fried something? It seems very fragile.
Safe start just keeps rebooting, and X on startup is ignored and os 9 starts.
HELP!!!
Any ideas gratefully received,
Wumpsdad

Hey annexit,
Yes I get a lot of donated computers so I have probably 80 or so sticks of RAM around here mostly PC 100 and 133 out of both PCs and Macs. I'm constantly sorting through them and marking them: "Works w/ iMac G3, Kernal panic in iMac G4, Works in tower G4 Sawtooth, not recognized...etc."
..old G3 iMac 500 Mhz with one 128 and one 256 PC133 (probably scammed from a G4 tower when I upgraded that),
Was planning to replace the 128 with a 512 PC100 - I saw the post from spudnuty
If you look here:
http://eshop.macsales.com/shop/apple/memory/iMac/G3450MHz_500MHz_600MHz700MHz
OWC sells a mix of PC 100 and 133 for that machine. They are very good at taking it back if it doesn't work.
Is your G4 Tower still on your net?
running panther, safari crashing and I can't print to the attached printer from the intel laptops wirelessly..
Hmm that should work. I use a MDD G4 Tower as my workhorse and am able to print to it no problem. It's running Leopard now however but I don't remember a problem when it was running Tiger.
Running Panther could be your problem. I was lucky when I bought an iMac G4 for $50 (bad hard drive) in the bottom of the box was a complete set of Tiger CD installers (rare).
Richard
Message was edited by: spudnuty

HELP - xmlParser is freaking out

Hi
i have a wierd problem. I am using dbmx_xmlquery
package to return xml as a clob data type. if I
run the qry in plsql works fine. run same qry using dbms_xmlquery it bombs out.
heres the function:
function fnc_bucketmps (inumBucketId in number) return clob is
qryCtx dbms_xmlquery.ctxHandle;
clbResult clob;
strSql varchar2(1000);
numRunId number(10);
begin
if inumBucketId is null then
return null;
end if;
strSql := '
select
m.mps_id as "@mps_id",
m.mps as "@mps_no",
cursor(
select
p.pattern_id as "@pattern_id",
p.pattern_no as "@pattern_no",
cursor(
select
i.pattern_item_id as "@pattern_item_id",
i.position as "@position",
mo.order_id as "@order_id",
mo.order_no as "@order_no"
from
vw_tbl_pattern_items i,
vw_tbl_orders mo
where
i.pattern_id = p.pattern_id
and i.order_id = mo.order_id
) as "items"
from
vw_tbl_patterns p
where
p.mps_id = m.mps_id
) as "patterns"
from
vw_tbl_runs r,
vw_tbl_mps m
where
r.run_id = :numRunId
and r.run_id = m.run_id ';
qryCtx := dbms_xmlquery.newContext(strSQL);
dbms_xmlquery.setbindvalue(qryCtx, 'numRunId', inumBucketId);
dbms_xmlquery.setRowTag(qryCtx, 'mps');
dbms_xmlquery.setTagCase(qryCtx,1);
clbResult := dbms_xmlquery.getXML(qryCtx);
dbms_xmlquery.closeContext(qryCtx);
return clbResult;
end fnc_bucketmps;
If I call this function I get the following error:
<?xml version = '1.0'?>
<error>oracle.xml.sql.OracleXMLSQLException: ORA-00600: internal error code, arguments: [kokbnp2], [942], [], [], [], [], [], []
</error>
If I paste this query into plsql and run it it works fine.
Whats happening - any help will appreciated !!!!!

When you swtiched audio formats did you go through compressor or just render in the timeline.
bogiesan

HELP!! Freaking out!

Hello All,
My mid-2009 Macbook Pro is giving me fits. Every so often, about once every 2 months, I would be working on my computer and then all of a sudden, the screen would go black (as if it were sleeping) and would not turn back on. I'd have to hold down the power button to manually shut it off, and then do an SMC reset/PRAM reset to get it back on. It would literally turn off in the middle of anything -- word processing, internet, etc. It is EXTREMELY frustrating -- it doesn't turn back on normally, either. I need to do an SMC/PRAM reset to have any hopes of it turning back on, other wise I would turn it on and it would do the grey screen, then turn off again.
Anyway, this has started happening FAR too often (just once is too much!!)). It has happened 3 times in the last 3 days.
Has anyone ever heard of this? The computer goes black (sleep light goes on, not pulsating though) and it does not turn back on unless I do some kind of SMC/PRAM reset. Sometimes when it's trying to come back on it gives me the blue screen, but then just shuts off again. I'm really ****** off, as this computer is less than 8 months old. PLEASE LET ME KNOW IF YOU CAN HELP!!!
Thank you,
Connor

So I finally had time to bring it into the Apple store. Explained everything, they took it for a few days to figure out what was wrong with it, and they decided it was overheating (something I assured them WASN'T happening) and replaced the fans. Low and behold, the same stupid problem occurred again, tonight, just 4 days after I got the computer back. Guess it wasn't the fans, like I told them it wouldn't be because my computer has never felt too hot.
Here's a recap of what happens:
My computer screen goes black. The computer is still "on" as indicated by the sleep light (not pulsating, just bright) being on. I have to manually shut the computer off because it is completely non-responsive. I try to restart the computer and it gets to the grey startup screen, and shuts right off after a quick flash of blue. This happens every time I try to restart my computer when this problem occurs. I let the computer sit entirely shut down for 5-10 minutes, doesn't help. This time it took 45 minutes to get it back on normally. This has happened probably 10-12 times overall now. It is beyond frustrating.
Apple did absolutely nothing to fix the problem. I am going to have to bring it back, but what good will it be if they didn't do anything the first time? Maybe now they'll listen that it is NOT the fans and my computer is NOT overheating when this happens.
If anyone knows what is happening or has any suggestions, please let me know.

HELP ME!!!!! My friend jailbroke my iPhone and i didnt want so i keep getting error 3194! help! im freaking out!

downloadlinks, whatever just help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

"The apple rep. said i could ask you guys and not get in trouble if you do we can explain it was my resposobility."
If that was the case, the Apple Rep could tell you how to do it. So, no one believes that story. Too, no one believes that you friend jailbroke your phone without your permission. Actually, repairing the phone is very easy. Perhaps your friend will do that for you.

HELP! iPod no longer works after update

I've been using my 20gb clickwheel ipod without incident for a year now, my last update had been iTunes 5 and hadn't updated my iPod recently either (why bother..it worked fine?).
I wanted to purchase music from the iTunes music store, but it wouldn't let me unless I upgraded to iTunes 6 and updated my iPod. OK - so I did that- upgraded iTunes to 6.0.1 and updated tghe iPod using the latest updated dated 2005-10-12. Then the horror begins.
On the first attempted synch post update - my iPod screen turned into a folder/exclamation point icon and stopped working. I tried resetting by holding down the center button and menu..it restarted and went back to the same folder/exclamation point icon. No luck.
I've tried restoring it repeatedly and then synching my library back to the now clean and restored iPod and it stops synching at different points and crashes (after 31 songs - crash iTunes - iPod freezes on the "Do not disconnect" screen - strange clicking noise - restore - try again - 58 songs...same... restore ..again...45 songs.. you get the picture).
It worked fine BEFORE the update except I couldn't purchase music. There has been NO change except installing the updates (it hasn't been jostled, dropped or anything). What can I do? The update killed my iPod?!!!! I am at my wits end!!!!!!
-Tory

OK..I've tried many things and my iPod is still hosed after updating. I upgraded my Mac to Tiger. I was told that the there might be some issues with synching using firewire with the new update - so I bought a USB cable and tried synching with that.
I have the same issue as before. I can restore the iPod, but when I start synching my music from Itunes back to the blank, restored iPod - it synches up anywhere from 20-200 songs and then freezes (spinning beach ball on one song halfway synched for an hour - then force quit iTunes - and start all over again: restore, synch, crash).
You know, I got burned by the 1st generation 5gb iPod battery issue, then the headphone jack stopped working on my 2nd generation, now my monochrome clickwheel iPod freaks out after Apple forces me to update so I can get my paid music back (it removed, yes, REMOVED my purchased songs because I was still using an older version of iTunes - when I updated to 6 I got them back - how Microsoft is THAT?).
I am really losing my faith in Apple's ability to make a quality product.I am despondent. If anyone has any advice - I would be most grateful...

My Ipod touch is freaking out!

This just started happening about a week ago...it seems to be ok when you first turn it on, but after a few moments..it freaks out. For instance, my keyboards--with whatever app, beit email or notes or a game..I try to type a letter--it types everything BUT that letter. And none of the erase buttons work to go back. On the Music--I keep trying to go to Playlists and it keeps flipping to Artists and pursues its own songs! Sometimes I don't even have to touch the Ipod--I just get my finger near it and it picks up the button it thinks I'm trying to touch and goes to whereever! It's like its possessed! It will cut in the middle or beginning of a song and go to whatever other song. It's not on shuffle or genious or whatever...I did a full reset by holding down the two buttons, but that only temporary fixes it. I can't type anything on it because it presses its own letters uncontrollably. Please help..this is a brand new Ipod I just got for Christmas. I didn't get it wet, I've been very careful with it. I do not want a refurb! I have lots of stuff on this 32G! :((

Basics from the manual are restart,reset, restore:
http://manuals.info.apple.com/enUS/iPod_touch_3.1_UserGuide.pdf

I dropped my ipod touch 4g(black) on the floor at chipotles(concrete) freaking out!!

ok so i dropped my ipod on concrete and now there is a dent beside the screen on the lower sound button when i use my ipod it has this huge black speckly blob by the dent and everything is extremely white it is possible to use it but very annoying and the left side of the screen if i use an app then it fades slowly if i type or try to do something so i can kinda read the right side of the screen but it is very hard i tried white on black and black on white which helped a bit i could see the screen a itsy bitsy bit better. but i am still extremely dramatized cause it took me half a year to earn it and took half a second to fall out of my coat and break. the screen is not cracked and the only outside appearence is the dent and if you look closely when it is off you can see the blob slightly , the blob kinda looks like well around the edges at least kinda like those oil things in puddles how its rainbowy shiny what ever but please help.also i tried restarting it and every else i can think of.

GOD i did pretty much the same think , idropped mine on a chair nd it dented on the lower volume button and at first there was this crack on the screen like a smurf punched the volume button nd left a crater. After i touched the crack a little bit freaking out, the whole screen went white with a small black spot( like the one on yours, but ALOT smaller) after a little while , like 10 min in my pocket, i could see the top of the screen normally(enough to see the time and date while its locked, but the spot is still there nd the rest of the screen is really white. i can make out things easier on the right side, but everything on the left is bright and distorted as if the loer part of the screen was cut in half nd the left side slid down.
But anyways i dont think we can fix this , ive tried pushing out the dent nd now my ipod just has seisures( the screen flashes like a strobe light as it goes from white and distorted to normal nd back)
Might just hav to pay the $99 for apple to replace/repair it

I AM FREAKING OUT RIGHTNOW I HATE MY FREAKING IPOD

i followed all the steps to put my songs on my ipod so that i could put them on to my new computer. then 1083 of my songs say tehres a problem with their files. but i didnt buy the songs or anything they're from CDs.
and i am freaking out right now because i dont want to put all the songs back on, it took forever to do it the first time

Songs that you ripped from a CD won't sync from an iPod back to a computer. It's not a flaw, it's the way it is. I suppose it's to prevent distribution of music. Anyway, there are quite a few programs that can help you accomplish your goal. I don't know whether you are using Mac or PC but for Mac there is a program called iPodRip and there are similar programs available for PC. Most are freeware or inexpensive shareware programs and the place I would recommend finding them is VersionTracker.com. Let us know how it goes.

Help meeeee.... iTunes is freaking out!

ITunes keeps locking up (spinning beachball) whenever I:
1-try to eject my nano
2-Try to quit iTunes
3-My finder freezes too sometimes
I also cannot add music to my nano without it freaking out: beachball spins for an eternity. I've had tp manually shut down my computer several times. I've had to pull my iPod out when it says "do not disconnect." I tried TP2GO's solution here:
http://discussions.apple.com/message.jspa?messageID=1239525#1239525
But when the screen came up from booting with COMAND S held down, it kept timing out every 5 seconds and I simply did not have a chance to type in /sbin/fsck -fy as I he directed.
Note-
I keep my iTunes music folder on an external. Recently I noticed some songs were not being saved there, so I manually moved them and then i went into iTunes preferences and confirmed that my music was still being saved to that folder. It was....I think.
Ever since, I've had lots of problems.
Can anyone help????
PowerMac G4 DP 1.42, 2 GB DDR, 120/160 GB internal HDs, 250/350 GB external HDs Mac OS X (10.4.6)

Hello. Is there anyone there?

Hi Guys, I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
Alex

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Help my ipods freaking out

Similar Messages

Maybe you are looking for