HELP!!! My itouch screen is stuck on a white screen :( I tried to rebot but it doesnt work :(
Please help!!! My itouch screen is stuck with a white screen. I tried the rebot, but its still white
Try #2 and 3 in link below. If neither help, contact Apple for service. You most likely have a hardware issue.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Similar Messages
-
the screen for my ipod touch went all white and I already tried to restarted but still doesnt work. What can i do?
Let the battery drain dead, recharge it and test. If it still does not work, restore.
Troubleshooting 101
Some topics covered
-Basic troubleshooting steps
-Hard reset instructions
-Manual restore instructions
-Hardware troubleshooting
-Preventive Maintenance
-Anti-theft & recovery tips
-Battery-saving tips
-Repair options
-Contacting Apple
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
So my Ipod classic starting acting oddly when I docked it recently. I took it off my docking station, which I'd used many times before and have no issues with, and the symbol for "docked" was still hovering over the battery. I didn't think anything of it until I came to dock my Ipod with my laptop and it said that it had to be restored before I could use it again. I restored it but this practically blank screen came up and just keeps flashing "Do not disconnect" and nothing else. What can I do?
Please help
Thank YouTry the following but you likely have a hardware problem:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
In the middle of downloading OS X Yosemite my screen got stuck on plain white....help?
In the middle of downloading OS X Yosemite my screen got stuck on plain white....help?
Hi irelandcashel,
Thanks for the question. If I understand correctly, you were downloading an update and it was interrupted. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iTunes: How to resume interrupted iTunes Store downloads - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
My itouch is stuck on a white screen!!
i dont know what to do, i was charging my itouch. it froze and is now stuck on a white screen. its froze before & ive had to restore it but it wont allow me to restore this time! What should i do?
nadiiiia how u can fix it is hold the home button and the power button together for a long time and it should stop
-
Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch is stuck on a white screen and i did everything hold the home botton and sleep botton togher, but it wont respnd it is just stuck on the white flash scree HELP PLEASE!
- Let the battery fully drain. The charge for an hour and see what happens, Try resetting too:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connct to computer and restore if it shows in iTunes.
- You can try placing the iPod in recovery mode and then trying to restore. See:
iPhone and iPod touch: Unable to update or restore
- Also see:
iPod touch: Hardware troubleshooting
Frequenly the white scree is due to a hardware problem. -
My ipod touch 4th generation got stuck on a white screen while i was trying to use an app, it won't turn off or anything, PLEASE HELP
Let the battery fully drain. After charging for at least an hour try:
iOS: Not responding or does not turn on -
when I open the settings and messages of the iPhone 4s I get stuck in a white screen, what should I do? the keyboard to open there is minute, I can not open the settings in any way.
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray BEFORE doing the reset.
-
McBook Pro Mac OS X 10.7.4 stuck on the white screen on shut down.
I would appreciate help on this.
When choosing to shut down my MacBook Pro it closes everything and then gets stuck on the white screen. Unless I press continuously the on button it just stays there...
Any ideas what the problem might be?Just wanted to add my own insight to this thread. I do have the same issue.
- I'm using a Macbook Pro 2011
- I'm using OSX Lion with full disk encryption (That's FileVault I think)
- I'm using Paralles Desktop Build 7.0.15094
- I'm using alot of different development USB peripherals (routed to a Windows 7 virtual machine)
- The installation of the 10.7.4 might not have completed 100% ... it was also stuck ( can't remember if it was re-booting or if progress bar never reached 100% ) for several hours (I basically let computer do whatever it needed to do overnight, I figure it might have to re-encrypt a large (if not all ) part of the disk ) so the next morning I simply shut it off. -
macbook was frozen, did a hard shut down, when powered up it is stuck on a white screen with a rotating dial
Sounds like the 'white screen of death'.
Try rebooting your phone. Take the battery out for a few minutes then re-insert battery and see what happens. It may take some time to reboot. There have been numerous "fixs" for this problem, but until RIM come up with a definitive answer to stop it happening, then really theres nothing we can do except try some things. The battery pull has been offered on a few forums and some say it worked for them. Worth trying again.
You could always try THIS
but that seems a bit extreme, but may work if the reboot doest. Do you remove the battery whilst its still on? thats how you normally do a reboot. take batt out whilst powers on. Sorry if this doesnt help, but i know theres people all over the net that get this issue. -
My macbook pro is stuck at the white screen at start up...
my mac is a 2011 13 inch macbook pro.
i tried holding command+option+p+r and it kept on playing the chime and it was still stuck on a white screen
please help!!Try a Safe Boot: http://support.apple.com/kb/TS2570
If not use the Recovery: http://support.apple.com/kb/HT4718 -
my macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on. i don't know how to get it to progress past this loading page.
Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you are not using Lion, Mountain Lion, or Mavericks then use the following procedure:
Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
My mac is stuck on a white screen that doesn't have anything on it
My family uses a mac so we each have our own account. When I logged out of mine, the mac went to its white loading screen. Sometimes our mac is a little slow so I thought nothing of it. Two days later, it's still stuck on the white screen. Help!
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Boot stucked on a white screen & gray apple
Hello,
I am using an Imac purchased in 2010, operrating a Maverick OSX system.
Since 2 days, my Imac does not boot and gets stucked on the white screen with a grey appel, and a small grey square sticked to the mouse cursor.
I tryied all tips & tricks suggested by several osx websites (after having disconnected peripherals), I mean:
- reset nvram
- start in safe mode, I checked the hard drive with the disck utility and corrected several permissions; but the reboot gets fixed at the same level
- fsck
- resinstallation of a time machine system backup
- installation of a new version of osx
Noone of those operation helped.
Thinking it was an hardware element which had an impact of the OSX operations, I tryied to boot on the my Windows 7 via Bootcamp, and the Windows OS worked properly on my Imac !
So I really don't know what to do next; do you have an idea ?
Thanks in advance for your help .
NicolasStartup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)
Maybe you are looking for
-
Crystal report XI R2 - ClientDocument java.lang.NoClassDefFoundError
Post Author: Mauro.Garlaschelli CA Forum: JAVA I downloaded Crystal Report XI R2 and i deployed the CrystalReportsSample web application into my Tomcat. When I try to view the example the following error is thrown:javax.servlet.ServletException: com/
-
Performance Problem..DBMS_XMLStore or SQL Loader
Hi All, I have implemented the insertion of data using the following method but it's taking very long. Once XML and XSL files are there in mapped 'Directory_Path'.... BEGIN SELECT directory_name INTO v_directory_name FROM all_directories WHERE owner
-
LV2011, cant check other versions right now. The Connector pane pattern window doesn't mark/show your currently selected pattern. Not a big bug, but i still classify it as such. /Y LabVIEW 8.2 - 2014 "Only dead fish swim downstream" - "My life for Ku
-
Problem installing CS 5.5 Design Premiun InDesign on new computer
In 2011 I successfully installed CS 5.5 Deisgn Premium on my Windows XP machine. Recently I replaced that system with a new Windows 7 machine and have again successfully installed CS 5.5 Design Premiun - with the exception of InDesign. My first insta
-
How to select and print calls only made and receiv...
how to select and print out list of calls made and received for the past year, between myseld and one particular contact