HELP MY MAC IS BROKE AND WONT START (unable to find driver ACPI)

Someone please help. I was reinstalling a printer driver and my power cut off while it was installing. now the computer wont start and i get this message below... I read to use the install dvd but my CD drive is broke and wont take cds. I did manage to hook it up to my dads computer with target disk mode so i can access files. his computer is a windows though. i do have a copy of the Leopard install cd saved as a DMG on his computer and a 8gb flash to boot it but i cant format the flash drive to be mac extended journaled GUID from his computer.IS there a program to do this???I dont know what needs to be fixed or where i can get this acpi driver? can anyone help because i dont have any money to get this fix and i need my mac for college which im starting soon.
This is the error message
panic(cpu 0 caller 0x004384FF): "unable to find driver for this platform: \"ACPI\".\n"@/SourceCache/xnu/xnu-1228.12.14/iokit/Kernel/IOPlatformExpert.cpp: 1407
(That is the first line. It goes on to say...)
Debugger called: <panic>
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
(then there are 7 lines that start with 0x2f5d3 followed by)
Backtrace terminated-invalid frame pointer 0
BSD process name corresponding to current thread: Unknown
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 9.7.0: Tue Mar 31 22:52:17 PDT 2009; root:xnu-1228.12.14~1/RELEASE_I386
System uptime in nanoseconds: 180744654
It also says 64bit mode enabled and i thought macs were 32bit.
I also tried resetting the pvram or whatever its called and no luck
Someone please help!!!!

I know this isn't what you really want to hear but I'd recommend taking it in to an authorized repair location or your local Apple Store to get the Superdrive repaired or replaced so you can do an install? I don't believe you will be able load from your Dad's Window's machine. However you might be able to from an external DVD drive.
Also I might recommend getting a UPS so if you have similar issues you will have enough power to do a proper shutdown.
Regards,
Roger

Similar Messages

  • Pease help error message panic cpu 0 caller 0x563ebd Unable to find driver for this platforlease help error message on boot up// panic cpu 0 calller 0x563ebd unable to find driver for this platform

    please help errror message panic cpu 0 caller 0x563ebd Unable to find driver for this platform) i started recieving this message upon booting up with the start up chime after foolishly deleting the Apple USB ethernet host in teh system/extensions folder.I Was hoping this would be a repair for a minor error message i was recieving after a recent itunes update & it has gone from minor error message to system no start.any suggestions,i dont have the original snow leopard OSX install disc but if i get one will this fix the problem or have i destroyed my mac,,please help

    Hello jayparks41
    There are a few things to try and the article below can walk you through them before trying to hunt down a Snow Leopard install disk. I will say that it may come down to reinstall Snow Leopard but also before any troubleshooting, make sure to have a safe copy of your data.
    OS X: About kernel panics
    http://support.apple.com/kb/TS3742
    Mac OS X 10.6: Reinstalling Mac OS X
    http://support.apple.com/kb/PH6606
    Regards,
    -Norm G.

  • Pease help error message panic cpu 0 caller 0x563ebd Unable to find driver for this platform

    please help errror message panic cpu 0 caller 0x563ebd Unable to find driver for this platform) i started recieving this message upon booting up with the start up chime after foolishly deleting the Apple USB ethernet host in teh system/extensions folder.I Was hoping this would be a repair for a minor error message i was recieving after a recent itunes update & it has gone from minor error message to system no start.any suggestions,i dont have the original snow leopard OSX install disc but if i get one will this fix the problem or have i destroyed my mac,,please help

    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode - About
    Safe Mode
    If you can't do that either, then you will probably need to reinstall 10.6.

  • Help....Unable to find driver for this platform

    Hello...after i shut down my macbook after it froze while playing counter strike when i turn it on it get this msg...Unable to find driver for this platform: ACPI....I cant boot it in safe mode...when i put my disc in and repair it doesnt help...When i follow the online text commands and start it up in single user i cant type anything...I dont wana lose all my files...I wasnt running windows on it...I was using the app thats like wine for mac...Thanks...

    I just got my new MBP today and it worked for about
    an hour. Now a get a panic:unable to find driver ACPI
    message. Then: debugger called. Kernel version...
    Restart computer.
    What the? I've tried restarting, holding down the
    opt/cntl/r/p keys, holding down x key, c key, etc.
    Just keeps giving me same mesg, no cursor and no
    comp. access. Any ideas?
    thats what im going through....

  • Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?, Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?

    Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?, Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?

    This is sometimes caused by Bad Blocks on the Hard Drive.
    If 10.7, hold down Command-R at startup, and choose Disk Utility.
    If 10.6 or earlier, boot to the Installer/Utilities DVD, answer only the "what language" question and wait for the MenuBar to be drawn. Choose Disk Utility from the Utilities Menu.
    Select your Hard drive by Make & Model and check the SMART Status (lower right of the right window). Choose "Repair Disk" . This ONLY examines and repairs the Directory area of the drive, but may improve things a bit. If errors cannot be repaired, you may need a stronger tool, or a new drive.

  • My ipod is displying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesnt "see" it even if the computer does.

    "My ipod is displaying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesn't "see" it even if the computer does."
    It worked two days ago fine, for two years, until I installed this newest iTunes update, then for one day it kept on freezing and going to apple logo screen mode, then today it only goes to that screen and wont start up at all.
    I've tried the hold down two buttons hard reset, that doesn't help. I've tried disc mode... but iTunes doesn't "see" it even if the computer does.
    This is a pristine ipod, never exposed to adverse conditions, never dropped, never wet, and it worked perfectly two days ago.
    Can I factory reset it somehow? (considering itunes can't "see" it)
    [Ipod classic 160gb less than two years old.]

    Looks like I might have found the solution on a youtube comment:
    R.O:
    "Plug into you laptop first, whichever set up you use that has iTunes, i know it won't read it, don't even open iTunes as of yet. Do the typical reboot "Menu +Center button at the same time" and hold it, DONT LET IT GO like we were told, when the apple pops up.. KEEP HOLDING IT it will make a new ding sound I've never heard before. and since its hooked to you laptop already an error message pops up and says apple will need to download something to repair your iPod. I when u see that that when i let reboot buttons go. hit ok on the laptop something downloads for like 20 seconds then the iTunes icon hops around when you open it it has a screen with an iPod classic on it and says "Software version blah blah, iTunes will check for an update on such n such date" AND FINALLY there's a "Restore" button. click that and you will be back to square one with your iPod. Renaming , adding all the music on it, but it will work again, finally. "
    I had to do it twice, because my mac froze the first time, but its recognized it now and is downloading the software as we speak...
    Now I've clicked the restore button and it's restoring... I'll post again if its a success, otherwise assume failure.

  • Iphone stuck with apple symbol and wont start up

    i updated my iphone and when it finished and went to reboot it just stays stuck on the apple symbol it constantly reboots and will never connect to my laptop i dont know what to do if anyone can help please do

    Hi,
    Luca224 & Ingo2711. Thanks for bringing this topic. on 29th Nov. I faced the same problem on my iPhone 3GS 32GB Firmware 3.1.2, iPhone stuck with apple symbol and wont start up. I have tried with 10 Seconds Sleep/wake-up button + home button to reset. But didn't work. Did google about an hour with many blogs. Finally I made a call to 3 iPhone care and spent 30 minutes and explained whatever I have done; iPhone customer care asked me to go to nearby iPhone service center in Sydney. BUT BY LUCK CLICKED ON iTUNE AND GOT THE OPTION FOR ONLINE FORUM FOR APPLE iPHONE. Many many thanks to Ingo2711 who has given the solution link and also thanks to Luca224 , who raised the issue. I feel, this is a common problem with iPhones those who using iPhone 3GS 3.1.2...... but try the link http://support.apple.com/kb/HT1808 and thanks to Luca224 & Ingo2711. PLEASE FOLLOW THE INSTRUCTION CAREFULY:
    1. Verify you have iTunes 7.5 or later. Apple recommends using the latest version of iTunes.
    2. Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
    3. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off. _+(in my case - red slider didn't appear, but i pressed the Sleep/Wake button until the iPhone went off, finally it was just off... i was frustrated... tried 3 times with more patience )+_
    4. Press and hold the Home button while reconnecting the USB cable to iPhone. When you reconnect the USB to iPhone, the device should then power on. +_( Do exactly as it says)_+
    Note: If you see the message "Charging... Please Wait" or you see the screen pictured below, let the device charge for at least 10 minutes to ensure the battery has some charge and then start with step 2 again. +_(True ... for me it happened 3 times)_+
    5. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. +_( I was nearly frustrated at my 3rd attempet; my thumb was hurting as I was holding the home button for few minutes..... but finally it worked yahooooooooooooooooo...... suddenly changed my decision.... about going to 3/Apple service center)_+
    6. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message:
    If you don't see the "Connect to iTunes" screen, then disconnect the USB cable from iPhone and repeat steps 3-6.
    Because you must restore iPhone or iPod touch, iTunes will not recover data from the device, but if it was previously synced on the same computer and the same user account, it should restore a backup (if available). See document HT1414, "Updating and Restoring iPhone Software."
    If you are still unable to restore the iPhone using this method, check Apple support for further troubleshooting and/or service options.
    Note: If you sync both an iPhone and an iPod touch to the same computer, make sure you select the correct backup to restore your settings from (don't select an iPhone backup if you have an iPod touch and don't select an iPod touch backup if you have an iPhone).
    **** ( BACKUP FROM YOUR iTUNES : MAC/PC; AS I GOT MY 95% DATA FROM THERE.... GOOD LUCK)******* IF IT WORKS PLEASE POST YOUR EXPERIENCE....*
    THANKS

  • HT6114 i have a mac mini that wont boot up and the screen says unable to find driver for this platform: \ powermac10.2 it also says mac os version not yeet set...how can i fix it

    the mac mini wont boot up it says you need to restart yuor computer and that its unable to find river for platform can i download software free from the internet to fix this

    What OS were you using on the mini before this problem started? If 10.7.8.9, boot to the Recovery Volume (command - R on a restart or hold down the option key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions. Then reinstall the OS.
    OS X Recovery
    OS X Recovery (2)

  • Windows defender is stuck and wont start- H50-50

    windows defender w.app is stuck and wont start, definitions are out of date but
    update failed several times, I've tried to reactivate Windows Defender. to no avail:
    " Windows Defender is Microsoft’s homegrown antivirus solution, which is enabled by default in Windows 8. (Unless your PC vendor disabled it to activate a bundled AV solution by Norton, McAfee and their ilk, that is—as Lenovo often does." I looked on MS downloads and there isnt any defender
    there isnt any also on my pc programs
    I have java 32bits version 8 update 45- lenovo H50-50
    thanks

    Try Windows Defender support for help with that issue: <br />
    http://www.microsoft.com/windows/products/winfamily/defender/support.mspx

  • Error 3194 still presist while restoring ipod touch 4g, just shows apple logo and wont start

    Method 1: i have tried almost everything, 'hosts' file editing (adding and deleting that ip gs.apple.com thing)
    Method 2: redsnow, snowbreeze,ireb (custom ispw and fetching thing)...
    now my ipod is in dead case, it just gives apple logo  and wont start.
    Method 3: TS 3.0 and 1.0 checked, certificate xyz... uncheked from intertnet explorer-> internet option -> advanced -> security
    Method 4: netsh xyz  (comand) in cmd...
    Please Help thank you.
    "Details:
    ipod touch 4g
    ios 6.1 installed (lastly)
    jail broken but deleted cydia from it
    then tried to restore it always gave Error 3194,
    then restored it from its backup file after that it didnt opened or just showed apple logo thats it."
    my itunes on dignostic gives this report,
    Microsoft Windows 7 Business Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP xw4400 Workstation
    iTunes 11.1.1.11
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 001AB71808E6CBD8
    Current user is not an administrator.
    The current local date and time is 2013-11-29 04:19:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce 8400
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.1.11 is currently running.
    iTunesHelper 11.1.1.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {BC8F9388-D244-4F12-92A3-A26318EE6C52}
    Description:    Broadcom NetXtreme Gigabit Ethernet
    IP Address:    192.168.1.102
    Subnet Mask:    255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:    Yes
    DHCP Server:    192.168.1.1
    Lease Obtained:    Fri Nov 29 04:16:55 2013
    Lease Expires:    Fri Nov 29 06:16:55 2013
    DNS Servers:    192.168.1.1
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-11-29 04:18:45.

    lllaass thank u bro, but none worked for me
    i have tried all these methods n above which i mentioned before....
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem
    in the end i went ot market n paid him 1.94$ and he restored it to 6.1.5... and said apple has closed other ios updation except 6.1.5 ...but still thank u soo much learned some new stuff from u...

  • Mac OS Mountain Lion wont start

    Mac OS Mountain Lion wont start. It's just stuck on white screen with spinning gear, once the white screen goes, I get a kernel panic...I suspect this issue has been caused by the recently installed xcode, it was the last program I installed this morning

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    And, remove XCode. If it's needed then be sure you install the current release version for Mountain Lion.

  • HT1349 should i replace the battery if my laptop is 3 years old and wont start up or recieve power ... took it to apple and the guy readjusted my battery and it was fine for two days and same thing happened? thinking of buying a new battery

    should i replace the battery if my laptop is 3 years old and wont start up or recieve power ... took it to apple and the guy readjusted my battery and it was fine for two days and same thing happened? thinking of buying a new battery

    I am bemused and have to ask how one "readjusts" a battery?

  • HT4623 try to update and went black and wont start up again

    try to update my phone now black and wont start up

    Same thing happened to me. I took it to the Apple store and they told me they would be happy to replace the phone for me for $149.
    <Edited by Host>

  • My iphone 3gs is off and wont start up.

    My iphone 3gs is off and wont start up. And when plugg it into the charger it starts up for a minute and shut down. but whithout charger dosnt do anything. Cant restore and it is not a battery problem.

    Sure sounds like faulty battery.
    Open iTunes on computer, connect iPhone to computer, hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the Firmware.

  • IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive?

    IMAC 24" screen went dead. Can I buy a mac compatible monitor and still use the IMAC hard drive - which is still working? I took it to the Apple store and they quoted $500+to replace the monitor. No help as usual. Can I buy a MAC compatible monitor ($189) and use it as a primary monitor? Can I set it up if the screen on the IMAC is dead? Any other solutions?

    The only negative to not having the original drive will be the work needed to reinstall all the apps and reconfigure to your liking. You will also have to decide whether to stay on Lion (which you should update to 10.7.4, BTW) or bite the bullet and take a leap of faith on Mountain Lion.
    In either case, to simplify matters you would do well to concoct a Lion or ML bootable installer on a USB stick. In either case, you need to get the corresponding installer downloaded onto the hard drive and, instead of running it to execute the install, extract the coveted InstallESD.dmg image from which you construct the bootable installer. See here for details: https://discussions.apple.com/message/17782820#17782820  The procedure applies the same to both of the latest cat flavors.

Maybe you are looking for

  • Why do I have multi language versions in other system....

    Hi All, Could you let me know why do I have multi languages versions when I transported the form to other sandbox system. Let me breif my probem. On development system I have one form and since we do not want other languages versions to come into pic

  • Scatter Plot Problems

    I'm fairly new to Numbers, and I'm having difficulty making scatter plots with some of my data. For instance, I want to create a graph of strain versus force, with force on the x-axis and strain on the y-axis. I have my data in 2 rows, and when I sel

  • Tray Extender came out

    I have the HP Officejet Pro 8600 Plus and the tray extender came completely out. I cannot get it to go back in and cannot find any resources online.  Please help!  Thanks in advance. 

  • Oracle Intelligent agent in different oracle home

    Hi All, We have installed new agent (9.2.0.1) in different oracle home, as previous intelligent agent(in main oracle home(9.2.0.5) where database resides) was hanging, after that we are facing a new problem in discovering listener and database in OMS

  • Suddenly my whole project is in 3:4 how can i switch back to 16:9?

    I don't know why or how, but since some minutes my whole project is in 4:3 format. I tried to restore the project to an older version, but the resolution is still 4:3. I have really no time to redo the whole editing, the movie has to be finished toda