Help! My mac is not starting up after install of tiger.

Just to let everyone know I'm a young girl and I'm pretty useless with computers.
After having a 'invalid node structure' on my mac and fixing it manually, the volume could not be repaired. So I've erased the Macintosh HD 'i think' after it saying 'resource busy' numerous times. I finally had a destination to install Tiger (before there wasn't one showing up) and I installed. Now the computer has installed successfully and is stuck on the white screen with the apple symbol and the loading circle thing. What do i do to make the computer start?
P.S. I used to have leopard. (but i couldn't find the re-install discs. Also the Macintosh HD is repaired and fine. I'm not sure that the OS x is 10.4.2 I guessed because it was tiger.

Hi there, and a warm welcome to the forums!
Do you know the age of your iMac or the exact model, Tiger won't work on the newer ones, like if it came with Leopard or greater.
Try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If that doesn't work report back please.

Similar Messages

TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?

Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?

How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Logic pro not starting up after install.

Ive tried to install Logic pro twice and both time it will not start up after install. can someone tell me what is the best way to install this program correctly? should i just pay apple more money to install the program for me?

I have exactly the same problem. Whilst 8.0.1 would hang during startup without displaying the splash screen intermittently 8.0.2 crashs every time a few seconds after displaying the splash screen.
Although my computer is almost 6 years old it is perfectly adequate for audio work. I hope this is fixed soon. Unimpressed with the quality control.

Mac book not starting up after update

after installing the latest update on Mountain Lion my Retina MBP dies after trying to boot. any help would be great.

Hopefully you have a backup. Your hard drive may be failing. I'd try a few things:
if you have any peripherals, like mice or keyboards, unplug them and try again.
try a SMC reset Intel-based Macs: Resetting the System Management Controller (SMC)
a safe boot Mac OS X: What is Safe Boot, Safe Mode?
boot to your recovery partition and repair your hard drive and permissions When to Run First Aid in Mountain Lion's Disk Utility - For Dummies
if that doesn't work, try internet recovery OS X: About OS X Recovery
if you can get your computer booted in one of the recovery modes, but it can't be repaired successfully enough to start into the regular boot partition, you may need to erase the drive and start over with a clean installation.
You might be able to get your hard drive to mount in target mode on another mac, which would let you back up any files that you want to save on the drive: OS X Mountain Lion: Transfer files between two computers using target disk mode
if you can't get any of this to work, then the drive quite possibly is failing, and should be replaced.

Web Sharing Not Starting Up After installing PHP

On Mac OS 10.4.9 on a G4 PPowerbook, using O'Reilly's "Learning PHP and MySQL," my Personal Web Sharing will not start up.
I enabled Apache per their instructions and things seemed fine.. Then I i installed PHP with these commands, sudo vi/etc/httpd/httpd.conf , then %s/#LoadModule php/LoadModule php/. Then %x/#AddModule php/AddModule php/. Then <espcape>:wq. Then
vi ~/Sites/test.php
o
<?php phpinfo() ?>
<escape>:wq
First of all, the test query from the book didn't work quite right, but now my Personal Web Sharing won't start up. It says "starting up." forever.
Help. And if you can't tell, I have extremely limited knowledge of Unix and command lines, etc.
What do I do? Assume I know nothing... : )

The first thing to do is read the Apache error log which will give you more detail about what's gone wrong.
<pre class=command>tail /var/log/httpd/error_log</pre>
The other thing to do is run configtest which might also indicate errors in the configuration:
<pre class=command>sudo apachectl configtest</pre>
although it'll probably tell you the same thing as the error log.

Can not start x after installing nvidia 173.14.x drivers [SOLVED]

After installing nvidia-beta (version 173.14.05-5) I am unable to start x. I receive the errors:
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
I have tried the installer directly from nVidia itself and I receive the same results. Any help is appreciated. Thanks.
Last edited by vytalelementz (2008-08-26 16:11:11)

nvidia-utils-beta was installed, also my GPU is listed as supported on nvidia's site.
Here's the whole xorg log file just in case:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux ve1.vytalworld.org 2.6.25-ARCH #1 SMP PREEMPT Fri May 16 14:52:43 CEST 2008 i686
Build Date: 22 May 2008 06:09:07PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 2 13:29:09 2008
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e0900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 147b,1c12 rev a3 class 05,80,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 147b,1c12 rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 147b,1c12 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 147b,1c12 rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 147b,1c12 rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0059 card 147b,1c12 rev a2 class 04,01,00 hdr 00
(II) PCI: 00:06:0: chip 10de,0053 card f47b,1c12 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,0054 card 147b,1c12 rev a3 class 01,01,85 hdr 00
(II) PCI: 00:08:0: chip 10de,0055 card 147b,1c12 rev a3 class 01,01,85 hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 147b,1c12 rev a3 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0291 card 3842,c564 rev a1 class 03,00,00 hdr 00
(II) PCI: 05:07:0: chip 104c,8023 card 147b,1c12 rev 00 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0204 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[b]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xfe900000 - 0xfe9fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:11:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xfe500000 - 0xfe5fffff (0x100000) MX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0xfe400000 - 0xfe4fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00007000 - 0x000070ff (0x100) IX[b]
[1] -1 0 0x00007400 - 0x000074ff (0x100) IX[b]
[2] -1 0 0x00007800 - 0x000078ff (0x100) IX[b]
[3] -1 0 0x00007c00 - 0x00007cff (0x100) IX[b]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xfe700000 - 0xfe7fffff (0x100000) MX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xfe600000 - 0xfe6fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:13:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00008000 - 0x000080ff (0x100) IX[b]
[1] -1 0 0x00008400 - 0x000084ff (0x100) IX[b]
[2] -1 0 0x00008800 - 0x000088ff (0x100) IX[b]
[3] -1 0 0x00008c00 - 0x00008cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfe300000 - 0xfe3fffff (0x100000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xb0000000 - 0xcfffffff (0x20000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(--) PCI:*(1:0:0) nVidia Corporation G71 [GeForce 7900 GT/GTO] rev 161, Mem @ 0xfc000000/24, 0xb0000000/28, 0xfd000000/24, I/O @ 0xac00/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[1] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[2] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[3] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[4] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[5] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[6] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[7] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[12] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[13] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[14] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[15] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[16] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[17] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[18] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[19] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[20] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[21] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[22] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[23] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[24] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[25] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[26] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[27] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[28] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[1] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[2] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[3] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[4] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[5] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[6] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[7] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[12] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[13] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[14] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[15] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[16] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[17] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[18] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[19] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[20] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[21] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[22] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[23] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[24] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[25] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[26] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[27] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[28] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[18] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[29] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[30] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[31] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[32] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[33] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[34] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.05 Mon May 19 00:30:52 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 173.14.05 Mon May 19 00:10:20 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[18] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[29] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[30] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[31] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[32] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[33] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[34] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[23] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[24] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[25] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[26] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[27] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[28] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[29] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[30] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[31] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[32] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[33] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[34] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[35] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[36] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[37] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found

Screensaver does not start automatically after installing ML

I can activate using hot corners but I've tried multiple delay times and it will not start. Must be missing something simple. Not having any issues accessing the same photos/images as on Lion, BTW

Hi Parvez and Ivaylo,
Has any of you used the startup mode setting? I tried using it and set it to always but the application still won't start. Is there anything I'm missing?
My application-j2ee-engine.xml looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
     <provider-name>nexeninc.com</provider-name>
     <fail-over-enable
          mode="disable"/>
     <start-up
          mode="always"/>
</application-j2ee-engine>

Mac will not START UP after software update. Help?

I just updated my 24" iMac to Snow Leopard and also put on the new iLife package. Everything was working fine, Then i tried to get onto the internet using my Bigpond wifi (usb stick) the software started fine and connected to the internet, but in safari no web page would load. so i clicked on the update software/firmware option for the bigpond wifi usb stick and after several minutes realised everything had frozen. nothing would respond.i held the power button down, it shut down. Now it will not power up. just sitting at the first white screen with the apple and rotating line dial. I have tried all of the stup options recommended iner manual and removed/replaced te ram. still no fix.. Can someone please help?

Try starting the Mac with the original DVD that came with the computer, then run disk utility and repair the hard drive also repair permissions. http://support.apple.com/kb/HT1782

Mac mini not starting up after startup sound and activity indicator

hi my mac mini was just working slow, so i restarted it and it doesnt start. it just shows loading indicator after startup sound.WTH
I tried resetting the v-ram/p-ram with command-option-P-R but to no avail. Please help!
thanks in advance !!!!

Hello,
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Mac not starting up after installing Logitech Control Center

Hello,
Since I installed Logitech Control Center I am not able to start my Macbook.
The single mode revealed issues mentionning Logitech classes. The disk tool is not able to repair the disk.
Booting on a snow leopard CD and using Disk Tool from there gives the same results.
Invalid Node Structure is the given message.
Would you have any idea on how I can fix this?
At least is there any way to backup some files? (I didn t succeed to copy/paste files in the Disk Tool)
Thank you in advance for your help!

It likely that DiskWarrior or Drive Genius might repair it.
Other than that, get an external drive, install OSX on it, boot with the Option/alt ket held down, & on 1st boot from the external & putting your info in, avail yourself of the Migration Assistant offer, se how much it can migrate off your internal drive.

Mac won't start up after installing OS X Yosemite

i recently installed OS X Yosemite to my iMac i believe it is a late 2007 I have not been able to use the computer since then. When I start it up the apple logo comes on a load bar comes under it, it fills about halfway then the mac turns itself off. I've tried to safe boot, tried turning and reporting the Mac tried holding alt-command-p-r. So far nothing I do can change the status of my Mac. Please help

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

HELP ME T23 does not boot anymore after installing a Lenovo update. Any idea?

Hi, I installed the updates and later I shut down the laptop as requested. Later that day I wanted to start it again but nothing happend other than the little round green light next to the switch button goes on. The monitor stays black. I removed the batterie and plug (the batterie is dead anyway) but that did not help. I believe my harddrive made noise lately, too. Is that the end?

I was able to eject the dvd by pressing the usb mouse left button while booting. Then put it back in after a reboot
After that selecting the alt-key, i selected the install dvd, and after a while (gray background and spinning weel) it took me again to the installation screen.
Will tell you if it is working in a while...

Could not start IIS after installing SharePoint 2013 Sep CU?

Hi All,
Recently I installed SharePoint 2013 Sep CU. Everything went well; I was able to install it and run the configuration wizard successfully but after that IIS was stopped and was not able to start because WWW Publishing service was stopped.
When I tried to start that service, it gives below error. Event Viewer did not show anything specific. Please guide me on this issue.
Appreciate your help.
Thanks,
Rahul Babar
ASP.NET, C# 4.0, Sharepoint 2007/2010, Infopath 2007/2010 Developer http://sharepoint247.wordpress.com/

Hi Rahul,
Please restart your machine, compare the result.
And please double click on the “World Wide Web Publishing Service”, in the top we can be able to see the “dependency” option, make sure all these dependencies are started.
In general, this issue is caused because The Remote Procedure Call (RPC) Service is not installed. All of the IIS services depend on the RPC Service.
Additionally, if the TCP/IP protocol is not installed, the same symptoms result.
More information, please refer to the links:
http://support.microsoft.com/kb/155768
http://www.dotnetsharepoint.com/2015/01/the-world-wide-web-publishing-service.html
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Macbook pro will not start up after installing anti virus program.

Cannot back up - is there anyway to go back to prior to installation of software (last sunday)? I took this to the apple store yesterday and they told me I must back up my data so I do not lose it but i cannot get it to start up to do so. It started several times yesterday but will not today.
This macbook was purchsed on amazon.com last october in germany and the warranty (per the apple store) started in June when amazon bought this machine from them so nothing is covered. I am a foreign exchange student (from germany) in michigan for the year and really need to get the computer going and am willing to lose my data if I cannot get it to back up.
What steps can I take to either get computer up (is there a "safe" mose like a windows product) or is there anything I can so short of wiping system clean myself?
Please advise and thank you

eww wrote:
Any Windoze user who is not well protected against any viruses that a Mac user could pass on is extremely foolish, and deserves them.
Interesting attitude. Whether they get infected or not is not the point, they will not be very happy to have received it in the first place.
Safe mode will not work. I am not sure what to do from here - can I just wipe out the system and reinstall since I cant get the system to start up in safe OR back up my files??
By "Safe mode will not work" do you mean it crashed in Safe Mode too or do you mean you couldn't get it to go into Safe Mode?
Try pressing Cmd R during boot. This will boot you into Lion Recovery. You might be able to reinstall Lion without affecting your files.
http://support.apple.com/kb/ht1533
You should have your old OS X disk, the one that came with your computer. You can boot from that disk and perhaps copy your files from the hard drive before you try anything else. Recovering files this way is not something I've had to do so I can't give much advice.

Photoshop elements 6 not starting up after install. Any ideas whats wrong?

I Have just installed Photoshop 6 on my new computer, Windows Vista home basic with service pack 1 32-bit os. It installs fine. However, when I click on the icon to start it up nothing happens. Can anyone help me.

Try installing the license-service update:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Install_the_licensing-s ervice

Help! My mac is not starting up after install of tiger.

Similar Messages

Maybe you are looking for