HELP! My MacBook Air does not switch on at all

My MacBook Air does not switch on at all. I press the "switch on" button but nothing happens. The battery is fully charged and the laptop is absolutely new (2 month of rare use). Have no idea what's wrong with it.
Thanks in advance.

Hi Aliyusha,
welcome to the forums. I'm sorry to hear about your computer issues.
Do you get a chime? dose the sleep led turn on or blink? What about the led on the power adapter, that LED on or off?
Apple Portables: Troubleshooting MagSafe adapters
http://support.apple.com/kb/TS1713
Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964

Similar Messages

After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

Have you tried changing the order in Network Preferences pane?
Open System Preferences/Networks/Click the gear symbol under the service list. Select set service order then drag. If your wifi is above the ethernet move the ethernet to the top. Click ok. Click apply (bottom left) and test.
Hope this helps
PJRS

My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.

My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.

Are you testing in the same room as the TC?
Power cycle the TC.. does it show up now?
Has it ever showed up .. ie is this a problem that just started from an existing setup, or has never worked?
Is the TC new? If old how old?
If you continue to have issues.. setup the TC from iMac and preferably using ethernet.
Change the wireless names to SMB compatible ones, short no spaces, pure alphanumeric.
Use WPA2 Personal security only.
Then set the wireless channels manually.. try 11, 6, 1 for 2.4ghz and try 36 or 40 at 5ghz.
Tell us how that goes.

How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software.

How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software. I downloaded open office to my mac to try and save money. It worked well for a while. Now I get this pop-up message that asks me to "Reopen" and when I select the option, nothing happens. I cannot save my documents anymore and I cannot convert them to word. Help!

dwb wrote:
Does OpenOffice output Word documents by default or do you have to select it manually?
You have 17 options to save as in Open Office, one of which is .doc files, yes it needs to be saved manually.
You may be able to default to DOC, but have not tried same.
Since Open Office is 99% same as Word, I use it, or Word, either one. Open Office is a bit less buggy than Word 11'

My macbook air does not start! I press the on key and nothing happens.

my macbook air does not start! I press the on key and nothing happens.
this morning when I took my macAir it would nt start and when I pluged it, there was no light indicating a charge.
I checked the charger on my wife's mcAir and it worked.
I plugged it back to mine and the orange light came.
since a few hours, the plug is on with the orange light on, and still I cannot start the computer. Nothing happens!
help!

Try a SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
This process helps correct these power issues.
Power
The computer doesn't respond to the power button when pressed.
A portable Mac doesn't appear to respond properly when you close or open the lid.
The computer sleeps or shuts down unexpectedly.
The battery does not appear to be charging properly.
The MagSafe power adaptor LED doesn't appear to indicate the correct activity.

My MacBook Air does not have an optical drive. I have a program (Megastar V) which is installed using a CD. Is there a way to use the optical drive on my PC laptop to install this program on my MacBook Air?

MacBook Air does not have an optical drive. There is a program I wish to install on my Air which is an astronomy application called Megastar V. Installation requires the use of a CD. Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
With gratitude,
Otto

Thank you for explaining to me how to do this. I will try it tomorrow and let all of you know how it goes.
Otto

Hello, I have purchased and installed Lightroom 5 on my Mac Desktop. I travel with a MacBook Air and would like to have Lightroom 5 on this device as well. The MacBook Air does not have a CD/DVD slot. How do I get Lightroom 5 on my MacBook Air so I can

Hello, I have purchased and installed Lightroom 5 on my Mac Desktop. I travel with a MacBook Air and would like to have Lightroom 5 on this device as well. The MacBook Air does not have a CD/DVD slot. How do I get Lightroom 5 on my MacBook Air so I can use it while travelling?

Adobe - Lightroom : For Macintosh
Just download and install 5.7.1. Don't worry about earlier versions.
You'll need to enter your serial number to license the software.

MacBook Air does not See a Plantronics Voyager Pro bluetooth headset

My MacBook Air does not "see" my Plantronics Voyager Pro + bluetooth headset as a discoverable bluetooth asset. I have read on Apple and Plantronics forums that these two devices should be compatible, but so far no luck. Anybody have any experience with this situation?

Turns out the Voyager Pro Bluetooth headset failed...exchanging it for a new one and should be GTG. Thanks.

Macbook air does not see iPhone's (4S) wi-fi network

My macbook air does not see the iPhone wi-fi network (I had been using wi-fi tethering for the last year before it suddently stopped working)
Similarly after installing the new operating system USB tethering is no longer possible....
Suggestions?
A.
PS: opertaing system:
Mac OS X Lion 10.7.5 (11G63b)

Try this fix https://discussions.apple.com/thread/4884226 and please post back how it worked. Another MBA user has reported this condition.

HT2801 my macbook air does not see my usb superdrive when i plug it in

my macbook air does not see my useb superdrive when i plug it in any ideas?

I am having the same problem and it is still not coming up supposed to be plug and play and Mac friendly?
Slim Portable USB 2.0 External CD-RW/DVD Combo Drive

HT2644 My MacBook Air does not detect my WiFi

My MacBook Air does not detect my WiFi since I updated it yesterday 29th September 2012. Tried everything. Hardware test shows no trouble found. It detects all networks around me just not mine. Thank you in advance

Troubleshooting Wi-Fi issues

My MacBook Pro shows the "Macintosh HD" icon on the desktop but my MacBook Air does NOT have the icon on it's desktop. Is this normal? If not, how do I remount the MacBook Air disk icon on the desktop?

My MacBook Pro shows the "Macintosh HD" icon on the desktop but my MacBook Air does NOT show the icon on it's desktop. Is this normal? If not, how do I remount the MacBook Air "Macintosh HD" icon on it's desktop?

Is it showing in the Finder?
If so, then this is normal.
Cheers,
GB

My Macbook Air does not have a place to check to allow Handoff in my System Preference (General). I have updated to Yosemite.

Trying to use Handoff. I've read where I need to go to the System Preferences - General - and check to allow Handoff. There is no place to checkmark that. I have updated to Yosemite.

What model (i.e., how old) is your MacBook Air? Note the following from Help for that System Preference screen:
Allow Handoff between this Mac and your iCloud devices
(not available on all computers)
If your Mac supports Handoff, select to turn on Handoff between your Mac and iOS devices set up with iCloud. For more information, see Pick up where you left off with Handoff.

Macbook air does not boot after yosemite update

After latest Yosemite update my Mac book Air is not finishing to reboot, all I see is the white apple on the black screen and the progress bar whch loads slowly and kind of get stuck half the way to the end, and it stays there forever.
I forced to restart with the start hardware key and it does the same. any idea what went wrong and or what can I do next?
thanks

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My macbook air does not start up successfully. when i turn on the power, it just turn blue after the apple logo, how to reboot or repair,.. pls help me what is the buttons command... thanks in advance.

pls help me how to reboot my macbook air,.. because starting it up was not successful. the screen just turns blue after the apple logo appeared.

i know loads of people who have had this problem including me. The Java script update apparently had some virus that has overloaded the start up disk. I took to apple who said i have to have the machine rebuilt but first i have to go to a data recovery company to get back everything that was on it. Data recovery company have quoted me nearly £1000.

HELP! My MacBook Air does not switch on at all

Similar Messages

Maybe you are looking for