Help! My MacBook Air is dying!!!

It was working fine. All of a sudden it froze. Now it powers up but only to show a small icon folder with a question mark in the center of the screen? What should I do? I have the extended insurance exp in june of this year should I just take it in?

Welcome to the Apple Support Communities
It looks like the hard disk is damaged. Instead of trying to fix it (it's not possible), just take your computer to an Apple Store and you will get it repaired for free. If you have a Late 2010 or later MacBooK Air, the flash storage is soldered onto the logic board, so it's probable that Apple gives you a new computer

Similar Messages

  • Is My MacBook Air Battery Dying?

    In the past couple of weeks I've been noticing that the battery on my MacBook Air (2011 13", purchased in November 2011) is losing power really fast. Even just while I'm surfing, reading the news on my local newspaper's website, I'll look up at the menu bar and the battery has gone down by 2 or 3 percentage points after looking at the website for less than five minutes. And it's not just that website. If I watch a tv show I got from iTunes and go back to my desktop afterwards I've lost anywhere from 20-25% of my battery. I am wondering if this has something to do with Mountain Lion. Before I installed Mountain Lion I could rely on my battery to last all day. I hardly ever had to plug it in, but now I have to plug it in to use it all the time because the battery seems to be dying. The computer is not very old! Is anyone else experiencing this and if so does anyone know what I might be able to do to resolve the problem? (p.s. I installed the MacBook Air firmware thing to allow it to do the whole power nap thing, but when I wake it up from sleep it's usally only 1% lower than when I put it to sleep the night before, so powernap doesn't seem to be draining it as much as just checking email and light websurfing) Help!

    Full Charge Capacity (mAh):          5761
      Health Information:
      Cycle Count:          309
      Condition:          Normal

  • MacBook Air 2010 died after installing Mavericks, happened to anyone else?

    Having installed Mavericks onto my early edition MacBook Air it has totally died.
    - It will no longer charge, in fact the light doesn't come on at all on the Magsafe (tried two different chargers both still charge my MacBook Pro)
    This happened after I turned it off for the first time having installed the new OS.
    Anyone else had their Air turned into a brick by Mavericks?
    I've got a genius bar appointment on Saturday but thought it was worth seeing if anyone else had suffered the same issue. Keen to know if my battery had just reched the end of it's life (although it was still lasting a good number of hours under Moutain Lion) or if Mavericks has caused the issue.
    Thanks!

    The panic was caused by the Yamaha audio device or its software, maybe with help from one or more of the other third-party system modifications you've installed. I suggest you disconnect the device, back up all data, and then remove the software according to the developer's instructions. Reboot and see whether there's an improvement. If there isn't, post your results.

  • Help! Macbook Air lost association with USB Airport hosted Time Machine Backup

    Okay, so my wife's Macbook Air was doing Time Machine backup to USB drive attached to previous generation Airport Extreme...
    We bought a brand new Airport router a couple of weeks ago, I plugged it in and everything went smoothly. Plugged in USN drive that attached to older APE router, and it's still visible on the network. However, ever since we got the new router, the existing backups are not associated with the Macbook Air anymore.
    Yes, I can start over with a new backup file, but I was hoping to use the existing backup (it takes a while to backup wirelessly, and we lose the whole history if we wanted to recover previous versions of files that were backed up—I can't think of anything we'd need right now, but Murphy's Law will probably apply if I go ahead and erase the old and start new).
    I was hoping all I would have to do was drag the old backup file onto the Time Machine icon to re-associate it with this computer, but I can't see any way to tell Time Machine, "hey, here's the backup file you are looking for... it's right here on the same USB drive attached to the new router."
    (Also, before anyone says to make sure I have a backup of the backup, I do. The computer is backed up offsite with Backblaze, too.)
    Perhaps it will be best to just start from scratch with a new Time Machine backup, that just seems like overkill, since there was nothing wrong or corrupt with the existing Time Machine file, I just switched what router it was attached to. Thanks for any advice/enlightenment.

    I guess I have a few comments.
    Apple has an opt out.. they do not support Time Machine backups on older Airport Extreme. Apple have always stated it is unreliable and so refused to support it.. only with Gen6 of the AE have they changed to supporting TM backups.
    From your point of view it should have worked.. it may indeed still work. But the change of network is significant and it will take some work on your part.
    1. I need to know what OS is the MBA running??
    2. Moving a disk from one network location to another, I would strongly recommend a full reset of Time Machine on the computer.
    See A4 here. http://pondini.org/TM/Troubleshooting.html
    3. Pondini in the same reference has some info about inheriting old backups .. slightly different context but it also could help.
    see B5 and B6
    4. It is also possible to move old backups into a new backup.. but this is then going too far.
    I would simply buy a new USB drive.. and keep the old backup drive for a few months until your new one builds up sufficient history to be sure you will not need the old ones.. at that point you can use the old backup drive again after a reformat.
    5. To do the new backup, since wireless is indeed a long and burdensome chore to make that crucial first backup, buy a thunderbolt to ethernet adapter.. assuming your MBA is recent enough. Ethernet is so worthwhile having it is required not optional extra. The cost at $35 is one of the cheapest adapters for a very expensive interface..

  • Need help for MacBook Air, is 64Gb enough?

    So i was thinking, is there enough space in then64Gb macbook air (2011 11'')? Not going to use it for big games just surfing the web (Facebook, YouTube, google), maybe some applications (Angry Birds and stuff) but not much.. Anyone please help, so basically gonna use it to surf the web not a "proffesional use". Thanks

    Yeah, the only reason I would say to get the 128GB MBA is because of the ram. The base model RAM ($999) isn't enough speed considering that you have a solid state drive in your presence.
    In regard to the harddrive alone, I like to keep my harddrive organized, so I find smaller harddrives actually beneficial, since if I'm given the space, I would use it up and let things sit on there I don't use. With 128GB, I keep a LaCie Porsche mini harddrive with me, where I dump all my movie and music files, and what not. I either play those movies straight off there, or I put a couple movies I seriously will watch in the near future. I never think that I will be caught in a disaster situation where I would need 6+ hours of movies in one sitting, so I always keep the inventory I keep on my MBA slim. And if I ever need a movie, I really don't mind attaching the mini ext. harddrive for a few minutes to download that particular movie.

  • Help connecting Macbook Air to network printer

    Hi, i am having trouble connecting a HP OfficeJet 7612 to a Macbook Air running OS X Yosemite 10.10.2 (14C109).
    The printer is connected to the router via Ethernet and the Macbook is connected to the router via Wifi.
    When searching for printers through the HP Utility setup or just by adding a printer it does not show anything in the list of available printers.
    There is an iMac in the office running Yosemite and that found the printer straight away, asked to download additional software and was working in minutes.
    I can add the printer by IP address but i can only print to it. It says at the bottom of the window  "Please note: An IP connection is supported. However, only the print feature will work properly." This is an all-in-one device and we would like to be able to use the scan feature on the Macbook.
    Things i have tried already:
    Uninstalling the driver, printer and software with the HP Uninstaller, this includes a "Reset printing system…"
    Downloading and installing the latest drivers and software from the HP website.
    Repairing Disk Permissions.
    In the printers EWS chaning the Bonjour Highest Priority Service to 9100 Printing.
    Disabling IPv6 on the printer.
    Restarting the router and printer.
    I personally feel it is not a problem with the printer but a problem with Network discovery / Airport settings on the Macbook
    Any help would be really appreciated thanks!

    Network Printer Troubleshooting

  • Help my MacBook Air doesn't open

    Please help me I press my MacBook Air power button  and it doesn't show me the apple logo it show me a file and a planet and after that my screen get dark and it says no bootable disc insert boot disk and press any key please help me the last time   I it opened successfully please help me

    Restart the computer and hold down the "option" key.
    When startup disk selection window opens up select the startup disk.
    Usually it is "Macintosh HD" unless you changed the name.
    You can navigate by using tab key and selecting by pressing the return key.
    Best.

  • HELP ME (Macbook Air + HP printer)

    Im trying to connect a Macbook Air to a HP Deskjet 4480, it seems like its set up ok and it says that everything is working but when I try to print anything, the computer shows that its 'printing' but it doesn't what did I do wrong or what can I do??

    First trick to try--try to print something. When the printer appears in your dock, click on that and bring up the printer window. Stop the attempted printing (erase the thing you were trying to print), go to where it you find lists printers that the computer can see and connect to. Now erase the printer--delete it. Then click on the + sign to add a printer. The computer should find the HP printer. Select it. Now that it's back, try again. See if that works.

  • Help help - my MacBook Air is in sleep mode and not accept my password

    My macbook air is in sleep mode now but i'm not able to open it!!
    the password dialogue would not accept any entries. It just beeped away at every key stroke but took nothing.
    I have not changed my password!

    The box just shakes when I type in the password. it doesn't give me the option to use guest login as I have changed the login setting to single user.

  • Help! MacBook Air Nvidia Graphics 256 uninstall failure to boot up! Help Please!

    Hello, I have a 2011 MacBook air with an Nvidia Graphics Geforce of some sortI was trying to install fallout 1 on the computer, but it said I need to uninstall the Nvidia 256 graphics updatethe thing did not turn on. Status bar on, then says panic on the screen along with the word kernel and a bunch of numbers. Then it says to restart computer everytime I turn it on. It says things like "panic", ( 4 potential arts on stack), kernel version: Darwin kernel version 10.8.0, and debugger called Panic. Is there any possible way to turn it back on? Tried plugging in the reinstall drive and holding down D, nothing, holding down C with reinstall drive, nothing. I need to know how to boot it back up without reinstalling  Mac OS! Thanks!

    Hello, I have a 2011 MacBook air with an Nvidia Graphics Geforce of some sortI was trying to install fallout 1 on the computer, but it said I need to uninstall the Nvidia 256 graphics updatethe thing did not turn on. Status bar on, then says panic on the screen along with the word kernel and a bunch of numbers. Then it says to restart computer everytime I turn it on. It says things like "panic", ( 4 potential arts on stack), kernel version: Darwin kernel version 10.8.0, and debugger called Panic. Is there any possible way to turn it back on? Tried plugging in the reinstall drive and holding down D, nothing, holding down C with reinstall drive, nothing. I need to know how to boot it back up without reinstalling  Mac OS! Thanks!

  • Help! MacBook Air with Cinema Display or iMac?

    I've recently been getting much more into Photography, and I would like to do more editing. The only problem is that I'm finding the screen size of my 11" MacBook Air a little too small for it. It's fast enough, but it has quite a small screen, not a lot of storage space....
    So my question is, would it be better to add an Apple Cinema Display to it (not necessarily one of the latest ones, I don't mind the older 20" or 23" Aluminium models), or should I get myself an iMac?
    I am a student so obviously I will be doing word processing and internet browsing quite frequently, but in all honest my MacBook Air does not move from my desk that much. Any advice would be appreciated! Is having a MacBook in addition to an iMac being greedy?
    Thanks!

    I'm currently sitting in my office using my MBP and looking at a 24" Samsung display. At home I replaced my 4 year old iMac with a 2 year old 13" MBP which is connected to a similar display. That should be tell you all you need to know! 

  • Help connecting MacBook Air to Printer

    I'm trying to connect to friend's printer (HP8600) - software installed on my MacBook Air, but midway into "reading" the doc, I get the message "Printer is not responding."  Printer works fine on friend's PC. Suggestions?

    Hello Rebecca Nordeman,
    Thanks for the question. I understand that you are experiencing issues with a printer connected to your MacBook Air. The following resource may provide a solution:
    Troubleshooting printer issues in OS X - Apple Support
    http://support.apple.com/en-us/HT203343
    Cheers,
    Matt M.

  • Help with MacBook Air

    I play airline manager on facebook, i bought a macbook air and now i am unable to play, is there a way that i can adjust the settings so that ican play?

    Are you speaking of this?
    http://itunes.apple.com/us/app/airtycoon-airline-management/id313478124?mt=8
    It is an iOS application, and will not play on a Mac (MacOS).

  • HELP MY MACBOOK AIR IS BROKEN!!!

    I have the first version macbook air, and for the past year, the battery said "condition: replace now," so I have been keeping the charger plugged in 24/7. Otherwise, my laptop dies in less than a minute. Is there any way to fix the laptop (maybe replace the battery?), if so, how?

    Yeah, try replacing the battery. Start here: MacBook Air - Batteries & Power - Apple Support.

  • Help re MacBook air memory

    Hi so I'm buying a MacBook air 13" Newest model with 128gb. Straight to the point I want it for basic internet, email, some YouTube but mainly I want to store my iTunes library on it, so I can get rid of my 8 year old windows desktop. I have around 1000 songs. On my iPhone i Don't think that it's above 10gb. I will be storing all of my documents and videos on an external hard drive. Do you think that it will be suitable or am I going to have to fork out for the 256gb model? Opinions would be great. Thank you.

    I use a 120 GB SSD. OS X including pre-installed software will occupy not more than 15 GBs. Allow about 15-20 GBs of free space for OS X. Allow another 10 GBs for third-party software. That totals around 45 GBs leaving you with about 75 GBs for everything else.
    You may want to disable Time Machine snapshots to conserve space:
    Open the Terminal in the Utilities folder and enter or paste the appropriate command line. Press RETURN and enter your admin password when prompted. It will not be echoed.
    To turn them ON: sudo tmutil enablelocal
    To turn them OFF: sudo tmutil disablelocal
    Note that turning them OFF will also delete all existing snapshots.

Maybe you are looking for

  • Error while running Hello world from Tutorial

    Hi , I am facing a strange problem while running Hello world from tutorial. The page expires after running for half an hour and the log in the Jdeveloper is [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.] C:\Jdev\jdevbin\jd

  • Internal hard drive/repair: SMART status; Disk Utility, Tech Tool & More

    machine: 12" PowerBook 1.5 GHz PowerPC G4 (Aluminium) with 80GB internal HD internal hard drive (original): Hitachi Travelstar 5K100 series HTS541080G9AT00 hard drive firmware: MB4AA5AJ ATA version: 6 ATA standard: ATA/ATAPI-6 T13 1410D revision 3a I

  • How to reduce redo space wait

    os:x86_64 x86_64 x86_64 GNU/Linux oracle:9.2.0.6 running : Data guard Problem : Redo space wait is very high Init.ora paramaeters *.background_dump_dest='/u01/app/oracle/admin/PBPR01/bdump' *.compatible='9.2.0' *.control_files='/s410/oradata/PBPR01/c

  • Which login manager? [SOLVED]

    I have discovered that I was unable to startxfce4 as a user because I did not install a login manager yet. Would you reccomend xorg-xdm or sLim? Why? Last edited by Blake Gideon (2009-09-18 21:03:21)

  • Printing-Why is printed pic cropped smaller than actual pic?

    Regardless of paper size/print size selected, every pic I select to print seems to zoom in and cut off the edge when printing. Looks like I zoomed in for the print but I did not. Any help on how to get the print to match what I see on the screen? Tha