HELP my nano froze!

I plugged in my nano to add some songs, and it just froze. It's frozen and on 'hold'. When I flip hold off and on nothing happens, and I cannot turn it off and on using the Play/Pause button either! Does anyone know what to do?

Hold menu and select until you see the apple logo. This should reset it.

Similar Messages

  • Help please...my ipod nano froze

    My Nano froze (2gb,2nd Gen)...i tried turning it off but it doesnt work...when i plug it into my computer itunes doesnt recognize it!
    help..its not even going dark..the light is on
    its completely frozen help lol

    Thank you!!! Pressing the menu and middle button
    together did the job in a few seconds!!! I have spent
    1/2 hr online here trying to figure out what was
    wrong and how to fix it!!Thanx again!!!
    In the future it would probable prove useful to consult your very fine manual:
    http://manuals.info.apple.com/en/iPodshuffle_FeaturesGuide.pdf

  • Help! Nano Frozen!  Hold is off but lock is still showing!

    I plugged my Nano in through a USB cord to my computer to update the iPod. There was no reaction to the iPod when I started iTunes. I took the iPod off the plug and it froze. Please help.
    iPod Nano - Black    

    Try resetting your iPod:
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
    *Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.

  • IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

    IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

    iPod not recognized in 'My Computer' and in iTunes for Windows

  • Nano froze up need help please

    i went to my stopwatch and before i salected the timer it froze up please help. i realy need help becouse my light stays on and the back of my ipod is heating up.

    Let me explain the do not disconnect screen:
    Ejecting your iPod via iTunes depends on what setting your iPod is on for.
    Connect your iPod. Go into Edit> preferences> iPod. See what setting your iPod is on; "automatic" or "manual".
    Automatic
    If you aren't restoring, or updating your iPod, iTunes should automatically eject your iPod from iTunes. If it doesn't, then right-click the name of your iPod in iTunes, and make sure that the "enable for disk use" is un-checked.
    Manual
    If you need to eject your iPod from iTunes if the setting is "manual", click the little arrow that's next to the name of your iPod in the left source list in iTunes.
    Also, the other simple manual way to disconnect your iPod, without opening up iTunes, is:
    Look at the bottom-right corner of your screen, and there's the system tray icons there. If the "Safely Remove Hardware" icon is there, click on it, select your iPod, and click "stop".
    Any more questions? I hope this helped you.
    ~~Kylene

  • Help, My Nano is Dead

    I was working out last night and sweat got on my nano and froze it. At first the screen froze, then it had the dead battery logo on the screen, then the apple logo appeared. All without me touching it at all. Then I tried to plug it in to my computer. Nothing happened. I tried to reset the nano. All that happened was the apple logo disappeared. I kept trying it and the screen would light up and then go away. This happened a few times. Since the last time the screen temporarily lit up, it has been dead ever since. I plug it in and nothing happens. I can't do any of the steps the website suggests. Am I completely screwed? Someone please help. Oh by the way, I bought this as a refurbished model.
    Dell   Windows XP  

    seems to me that your poor poor nano died becuase the sweat caused a short somewhere inside. Where did the sweat land?
    btw welcome to the forums

  • Help my nano say it's corrupt

    i was up dating my dads nano with some new songs, when a message came up saying new sortware up dates!! So i down loaded it. then i sync his itunes. removed the nano correctly tried playing his new stuff on the nano and everything froze. it wont turn off or on cant be found on the pc but is showing in device manager as working ok.

    Try resetting the iPod.
    5Rs
    5Rs Tutorials
    Also, check these out:
    iPod in My Computer but not iTunes
    iPod Not in My Computer or iTunes
    Check the Device Manager
    Windows Laptop Doesn't Recognize iPod Over
    USB
    I hope this helps!
    thanks i got this off another site and it did work after a few try's
    Try this it worked for me:
    Flick the hold swith (on the top of the nano) to on (orange showing) then off (white showing)
    Press and hold down the centre button and menu for 10 seconds
    You should see a black screen then the apple logo
    This is a software reset All your songs should still be there and the ipod should work
    If this fails you can restore the whole ipod, however this will remove all songs and revert you to the default settings.
    To do this plug in the ipod and select restore in itunes

  • My Ipod Nano FROZE!! And I can't get it to turn off!!

    Ok, so it isn't MY Ipod Nano. I bought it for my younger sister. But I told her to give it to me if she had any troubles, and I am lost now. She gave it to me and the thing is FROZE!! I didn't know Ipods could freeze! How do you fix that? I push all of the buttons but it doesn't even make the clicking sound.
    I seriously need help.

    I looked at a different topic and I found out how to
    fix it. Thank you for your help anyway! ^.^ All I
    had to do was hold the Menu and the Center button for
    10 seconds. ^.^
    Isn't that what I told you?
    "...press and hold Menu and center buttons simultaeously for 6 or more seconds. That should RESET it..."
    However, it really doesn't matter, the problem is solved for now.
    For future reference, the wonderful manual[*] on page 45 actually recommends the following:
    To reset iPod nano:
    1 Toggle the Hold switch on and off (set it to Hold, and then turn it off again).
    2 Press and hold the Center and Menu buttons for at least 6 seconds, until the Apple logo appears.
    [*] http://manuals.info.apple.com/en/iPodnano_FeaturesGuide.pdf

  • Pleae help ipod Nano wont update, error message driving me insane!!!!

    I have a 2nd gen ipod nano which after originally connecting to itunes was fine, has now decided to not update and not even allow me to restore. I keep getting message that I need to type in administration password. The other message says unknown error .
    If you can make sense of this please help.
    thanks
    Mac Mini   Mac OS X (10.3.9)  

    I am having a similiar problem... I could not transfer all of my songs due to an "error -69". Anyone know what this might mean?
    I'm very frustrated!!

  • Help with Nano not working

    Help!!! My Nano was fully charged and I let it sit for longer than a week. When I went back to the Nano, the battery was gone. I attached it to my Mac and the apple logo appeared and disappeared. It would not power on. The Nano turned on after 20 minutes, but it was cycling through the choices. Then the Nano shut off. When the Nano is on, it is not being recognized by my Mac. My 5G iPod works fine on the usb cable.

    See these.
    iPod doesn't appear in iTunes or on the Mac desktop.
    iPod does not appear in iPod Updater or iTunes in Mac OS X.
    iPod appears on the Mac OS X desktop but not in iTunes.

  • Please help, iPod Nano and iTunes issues

    1. I can't update my iPod Product Red. I've downloaded the update, and when I click "update" in iTunes, it just sits there for hours saying its updating
    2. The first time I start windows, connect my iPod Nano and then start iTunes (or even the other way around, start itunes then connect ipod), my nano doesn't show up in itunes. I need to restart the service after plugging in the nano every single time!
    3. I cant restore my iPod Nano either, the same problem with the updating my ipod, the progress screen just goes back and forth for hours without doing anything, infact my nano just seems like it looses synch during both an update and a restore, because the do not disconnect message on the screen goes away once either update or restore process is started.
    Please help! This is my first ipod purchase and so far it is really disappointing me and frustrating, thanks
    -Alex

    1. I can't update my iPod Product Red. I've downloaded the update, and when I click "update" in iTunes, it just sits there for hours saying its updating
    2. The first time I start windows, connect my iPod Nano and then start iTunes (or even the other way around, start itunes then connect ipod), my nano doesn't show up in itunes. I need to restart the service after plugging in the nano every single time!
    3. I cant restore my iPod Nano either, the same problem with the updating my ipod, the progress screen just goes back and forth for hours without doing anything, infact my nano just seems like it looses synch during both an update and a restore, because the do not disconnect message on the screen goes away once either update or restore process is started.
    with that particular set of symptoms, first check on the possibility described in the following document:
    iTunes for Windows: iTunes 7 doesn't recognize iPod

  • WHAT NOW?? My Ipod Nano froze.

    My ipod froze completely and I am unable to do anything with, other than watch it as the battery goes dead. I would much rather listen to my music now instead of having to wait. Could anyone help me? This has happened before.

    Try Resetting your iPod. Hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display. Have a look at these links for more information:
    iPod isn't responding it appears to be frozen
    iPod stops responding or will not waken from sleep

  • HELP my iPod froze and wont turn back on!!!

    my ipod froze and when i reset it the screen just went black and now nothing will work. please help, thanks.

    You could try plugging it into power - not pc

  • Help! Nano is black and wont reset!!!

    I had my ipod nano in an iradio it was playing fine, then just went black.  It will not reset and my computer will not recognize it.  I then put my husbands nano on same iradio and after about 10 minutes did same thing.  What happenened, HELP?

    How did you try and reset the Nano?  Does this particular dock listed your Nanos as being compatible with your particular iPods?
    Did you connect each of these iPods back to your PC and iTunes and left sit for at least 30 minutes to see if they show any signs of life after that?
    B-rock

  • HELP! nano frozen in lock mode

    Hi there,
    While listening to my nano yesterday, as always I put it on hold to save power, and I accidentally dropped it on the floor face-down. Since then, the click wheel has been frozen in lock mode and is unresponsive. I have tried toggling the hold button back and forth many times, as well as trying to restart my ipod, in addition to letting it play until the point the battery dies and then connecting it to power (I read this may help?), all to no avail.
    Are there any ideas as to how to solve this problem? Will this problem just stop on its own?
    Please help! Thanks in advance.

    Update: I just went upstairs to try the hold switch again, and I had this thought: this whole problem started when I dropped my iPod while it was on hold, so why can't I drop it again? So I smacked it (when I say smack, I really mean a little harder than a tap) a couple times on a hard surface and guess what? It works again! I'm sure this didn't solve the problem long-term and that I will need to get it repaired in the near future, but for now my problem is solved! I'm kind of afraid to touch the hold button now, though.
    I might still send it in for repair just to avoid this happening again in the future, but only if it happens again in the next couple days/weeks.

Maybe you are looking for

  • Earmarked funds - Express document "Update was terminated" error

    Hi, When i create a contract(RECN), a earmarked funds document getting created and it updates the table KBLK with single primary key BELNR. I see in the Tcode OK60, the number range assinged is '05' - 0200000000 to 0299999999. KBLK table has entries

  • Problems with Zen Mi

    Hello, i?m from Spain. Sorry for my english, it'ss very bad. I bougth a Zen micro and when i turn on or unlock the mp3, the buttons "play / pause", "back" and "submenu" dont work well. I have put the sound ("click") when you press any button but thes

  • Regarding upload GL balance in LSMW?

    Hi experts, i want to upload Gl balances through standard LSMW direct input menthod. i have to upload 1000 items with one header, due to Client rule  i can upload item only upto 949 and check the (sum of debits = sum of credits) if there is any diffe

  • How can I hide what I write in Java Script

    If I write a script, I offer it to many one to use it, but I don't want to anyone to see what I write in the script, how can I do?

  • Premiere Pro Reinstallation Issues

    I've recently uploaded Premiere Pro CC to my Mac. After battling with playback issues and the constant quitting and retrying to the program, I decided to reboot and to uninstall Premiere Pro in hopes that I can reinstall it. I try to reinstall the pr