Help!!!! My Nano only loads on the F drive, not recognized by Itunes
I have 2 ipods that have always worked with my itunes. I recently updated and have Itunes 7.0 and now my itunes won't recognize my nano. I have tried signing out of the itunes account, re-starting my computer and trying different USB ports but it still won't recognize it. It opens a file folder on the F drive instead.....any one know what's up and how to fix this?
Thanks!
Perhaps this will help:
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
Hope it does. Good luck.
Similar Messages
-
For some reason my IPod nano 7th generation is not recognized by ITunes. It has recognized it up until today. I have followed every step that is provided for troubleshooting and nothing is working. Does anyone have any suggestions?
Hello sipsy12,
Thanks for using Apple Support Communities.
For more information, take a look at:
iPod nano not appearing in iTunes
http://www.apple.com/support/ipodnano/assistant/itunes/
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Have a nice day,
Mario -
My ipod, when pluged into the computer, is not recognized by itunes.
When i plug in my ipod, it wont show up under devices in itunes, but it is showing up under devices in my computer. A message pops up saying "do you want to scan and fix your ipod". I close that message. Then couple minutes later i get another window message, that says "Autoplay" and there is a bar that says "searching for content..." I close that message also. When i disconnect my ipod, in itunes it says "The ipod cannot be synced. The required folder cannot be found." i hit the okay button, because its my only option. When the message is up, the ipod shows up in the devices section of itunes. One night i plugged in my ipod, and it got to a point where it was recognized in itunes, but it the top middle bar of itunes, it said " varifying ipod" the next morning i woke up, it was still saying that.
Do the iPod Disk Diagnostic, as posted by tt2, it wont fix your problem, but help in troubleshooting.
Have a nice day! -
I have 2 ipod touches. One of the syncs with itunes just fine. The other isnt recognized by itunes. I reset the ipod to factory settings,and uninstalled and reinstalled itunes, still no recognition.
- Do you have the latest version of iTunes on the computer? iOS 6 requires 10.5 or later. The current is 10.6.3
- Have you tried a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- You could try placing the iPod in Recovery Mode and restore the iPod. However, if you can't restore the iPod or use this program to get the iPod out of recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode
you will lose use of the iPod.
- An appointment at the Genius Bar of an Apple store might be in order. -
itunes wont recognize iphone 3g after downloading ios5
If you uninstalled and reinstalled iTunes, did you follow the steps in this support document http://support.apple.com/kb/HT1923 exactly. Check and make sure. If you did, then try this support document to get the phone into the Recovery mode. It may take more than one try. http://support.apple.com/kb/HT1808
-
reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano -
I created a photo album on my iPhone 4s - edited photos etc. but I cannot figure out how to transfer it to my pc (using Windows 8). The only folder in the iphone drive is the one which has the Camera roll photos Help please - I really need the photos!
The camera roll is not part of the sync process at all.
You should be importing these photos to your computer regularly as you would with any digital camera. Youc an organize them on your computer and sync the to the iphone if you wish.
The photos sync from the computer to the iphone is one way.
The iphone mirrors the selected content of the computer to which it is synced. -
Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it? I fear it may be stuck in some sort of reset loop which is stopping itunes from recognizing it. How do I go about the process of sending it in to apple if I cannot find a fix? Thank you in advance, it is greatly appreciated!!
- See if placing the iPod in Recovery mode will allow a restore.
- If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
- Then time for an appointment at the Genius Bar of an Apples store. -
Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
Please help me.I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
You asked what I meant about saving the installer on your PC.
When you go to the iTunes download page:
http://www.apple.com/itunes/download/
And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts. -
Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.
See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
Clinton -
My ipod nano is not recognized in itunes on my computer, when it has in the past. How do I fix this problem?
I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple. -
I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?
I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple. -
I have a 6th gen ipod nano that is not recognized by itunes on my PC (Windows 7). I get an error that it 'could not be identified properly'. I have tried all tips on the apple site to correct the problem, including unistalling and reinstalling itunes twice. Nothing works. Has anyone tried something that worked that is not part of the Apple support page (http://support.apple.com/kb/TS3218)? Thank you in advance for any help!
gltg wrote:
Running Windows XP professional SP3 and itunes 10.2.
I have followed every troubleshooting page on the apple support site yet my ipod nano 6th gen is not recognized by itunes
I have spent 3 days messing with my pc and have made no real progress.
Then it's time to call Apple tech support while you are still under warranty. Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273) -
my ipod touch (generation 4) is not recognized by itunes. I've each time to reinstall itunes, it works few days and suddenly not without reason-only was is reinstallation-reset of ipod doesn't change something.does someone can help me please?
Wow the customer service is even worse. Does Apple want me to go around jailbreaking my iPod now so I can use something that actually recognizes my product?
-
Nano is not recognized by Itunes or Ipod loader
i have a 2gb black nano and it is not recognized by my home pc or work pc (running windows xp) by either itunes or ipod loader.
after browsing through some topics, i found a way to enable disk mode, this allowed my nano to be recognized by ipod loader. i proceeded to do a factory restore to this running the november version of ipod loader and it displays "do not disconnect" forever. so i restart it manually by select + menu, then find out that it is still not recognized by itunes or ipod loader. realizing that disk mode allowed ipod loader to work, i tried disk mode on itunes and it recognizes it! so basically, my question boils down to...
Should itunes and ipod loader automatically recognize the nano once its plugged in while it is in normal mode? or do i need to keep enabling disk mode to update through itunes and loader? how many people have this same behavior running xp? Thx!Wow I'm surprised this is such a common problem... So for those who can't connect with itunes and iloader: does disk mode work for you? Hit the center button and play button simultaneously after you reset it (right when the apple logo first appears) to enable disk mode... For me, this works all the time when connecting, but I don't think this is normal since i used to be able to connect in normal mode... maybe someday apple will realize we don't all have Macs...
Maybe you are looking for
-
I have a solution for the Administrator Error
Hi all, I have also been having serious problems with the message "An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator". I have found a SOLUTION that has worked for
-
Windows Loose Content on Drag after 10.4.6 update on quicksilver
Ever since the 10.4.6 update i've had a problem where when I open a new window, doesn't matter what it is, and drag it or scroll in it the contents of the window Disappear and are replaced with whatever was behind it. I have to hit expose to fix it s
-
Hi All, I have a report that shows 'sales count' vs 'jurisdiction' on a pie chart. If there is only one jurisdiction, the chart size is considerably larger than when it has two or more jurisdiction. The same does not happen for other reports with the
-
Itunes 7.0.2 problem - error 2330
Guys, I have a big issue as I can't install i-tunes on my PC. Here is the message I have: ERROR CODE 2330. Could you please help ?... Thanks,
-
Hello, I am new to reading binary files and have had a lot of help creating this simple read binary vi. There is header information (# of channels, sampling rate etc) on the sample files\ which no matter what I do, I cannot read it. I would really ap