Help! my nano won't turn on!

i tried using my nano the other night, and it wouldnt turn on, which was strange because it was turned off, so ive been looking up how to fix it, and it says to restart it, but it wont do that, and its not the hold thing, im not sure what the problem is, but on the screen, it kind of has a thing where if you angle it, you can read it and it says...
ipod diagnostics
SVC Aug 17 2005
FiveInOne
KeyTest
FlashScan
WheelTest
TouchWheelID
Playback
Linein
Status
...and its listed just like that, so if you can help me, PLEASE do! thanks!
dell   Windows XP  

"To get your iPod out of Diagnostic Mode, you will have to restart it again." taken from The iPod's Diagnostic Mode
Regards
Colin R.

Similar Messages

  • 7th gen iPod nano won't turn on after disconnect.

    7th gen iPod nano won't turn on after disconnect. I loaded some new music, synced and ejected correctly. screen went black on unplug. Waited, did the button trick, didn't work. plugged it back in & it is recognized immediately. restored, resynced & ejected again. same thing-black screen w/ no response. Charged it overnight. ejected, screen then went to language setting. OK for English, eject & back to black on unplug. Switched ports for cable, tried eject thru PC...all resulting in dead nano after unplug. I really don't want to charge into the store & take it out on the poor kid who will catch the brunt of my frustration. anyone have a suggestion?

    Hello Marie,
    I would be concerned too if my iPod nano was not powering on.  I found an article for the 6th generation iPod nano that has steps you can take for an issue like this (the only difference for the 7th generation iPod nano is the steps you will take for the reset. I included the steps to reset a 7th generation iPod nano below):
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    You can find the full article here:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    All the steps apply to the 7th generation except the steps for the reset.  To reset a 7th generation iPod nano, use these steps:
    Press and hold the Sleep/Wake button and the Home button for six seconds, or until the screen goes dark. The Apple logo appears after a few seconds, and then the Home screen. You may need to repeat this step.
    I got these steps from this tutorial, which may also help with your iPod not appearing in iTunes:
    iPod nano not appearing in iTunes
    http://www.apple.com/support/ipodnano/assistant/itunes/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT1322 My nano won't turn on or reset

    My nano wont turn on

    Hi mutanthippy,
    If your iPod nano won't turn on, you may find the following article helpful:
    Apple Support: iPod won't turn on
    http://support.apple.com/kb/TS1383
    Regards,
    - Brenden

  • My iPod nano won't turn on power button stuck down.is this servicable?

    My iPod nano won't turn on power button stuck down.is this serviceable?This is the 6th gen model

    Hi Whackers!
    Here is a link that will help you get support for this product:
    Contact Apple for support and service
    http://support.apple.com/kb/he57
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • IPod nano won't turn on unless i restart it 15 times.

    for some reason my nano won't turn on for whatever reason. it just started doing this one day. it will be charged and it won't turn on unless i restart it like 15 times. and untill the 15th time it will like only restart half way and then finaly it will turn on. but if i leave it for half a day and not listen to it, it will do the same thing. any suggestions?
    1st gen.    

    See this: My iPod won't turn on.

  • TS1372 ipod nano won't turn on, says error 1437

    my ipod nano won't turn on and I've tried restoring it.  received error message 1437 after it tried restoring itself.

    http://support.apple.com/kb/TS1539   Try this.   It seems the error stems from some file errors in Windows.
    Cheers!

  • My ipod nano won't turn on (4th gen)

    My ipod nano won't turn on (4th gen)
    i dropped it out of my car and now it straight won't turn on
    *I've tried doing that "hold the menu and middle button" trick (i don't know if i have been doing it right though)
    Please respond i'm desperate

    Have you tried connecting to iTunes to be restored?  You may need to manually place the iPod into Disk Mode first so that it is recognized by both your Windows OS and iTunes.
    Putting iPod into Disk Mode
    B-rock

  • My ipod nano won't turn on!

    My ipod nano won't turn on. I have tried restarting and resetting it. I have tried plugging it into two different computers and both times it just kept blinking the apple logo. It's not on hold. My warranty is expired. Do I need to get it repaired or replaced, or is there something I can do?

    my ipod nano won't trun off either sometimes.. when that happens i have to hit play and have it play a song for a couple of seconds and then do the thing to turn it off andfthen it turns off.

  • My nano won't turn off, and it is frozen on one screen?

    My nano won't turn off, and it is frozen on one screen?

    Could it be something as simple as the Hold switch got turned on? I would try resetting it. 
    This will work for Nano's generation 1-5.
    Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    Press and hold the Menu and Center (Select) button simultaneously until the  Apple logo appears, about 6-8 seconds. You may need to repeat this step.
    For a 6th Generation:
    Press and hold the Sleep/Wake button and Volume Down button simultaneously for 8-12 seconds or until the Apple logo appears. You may need to repeat this step.
    For a 7th Generation:
    Press and hold the Sleep/Wake button and the Home Button until the screen goes dark. The Apple logo should appear after a few seconds, then the Home screen should appear.
    Source: http://support.apple.com/kb/HT1320

  • Help! Ipod nano won't turn on after disconnecting!

    Okay I've had my Ipod nano for like 3 weeks. I've used it once. It worked fine when I first got it and after my battery ran out I haven't used it for about a week. When I got it back I hooked it up to my computer and updated the stuff on it as well as let it charge. After is says to safely disconnect, I disconnect it but it automatically turns off and won't turn back on. I've tried resetting it and nothing works. I thought the battery was dead but I've left it plugged in (not only USB on my computer but also tried an outlet) and it never completely charged. I've even left it plugged in overnight (well over the 4 hours it's supposed to charge). I have no idea what to do (It also took like at least a full day to completely charge the first time I've had it)

    Tuesday, December 02, 2008 7:23:56 PM
    Okay my iPod wouldn't turn on . (Guess I will be throwing out the box to ship my ipod for warranty replacement)
    at like 11pm dec 1 2008, the ipod was dead, pressing the power button did nothing.
    I thought it was a goner... I even ordered a warranty replacement..
    ipod wouldnt turn on . left it for 24 hours. when I got home from school the next day
    it tried to sync but my playlist did not exist..it even showed the folder in windows
    After trying various USB ports and seeing an Apple Icon, and "connect to power low battery"
    I even requested a warranty replacement... and apparently you throw out the box they send to cancel. I wish I could be courteous and let them know
    So in short
    PROBLEM;
    ==IPOD Won't Power on when you press the power button==
    (FIRST OF ALL , I STRONGLY URGE YOU TO NOT TRY TO OPEN THE IPOD UP,
    you will probably scratch or damage the beautiful iPod .. when it will be perfectly fine 24 hours later...)
    Try:
    RESET, and plug in to itunes and restore..
    SOLUTION:
    http://www.everymac.com/systems/apple/consumerelectronics/ipodfaq/ipod-troubleshooting-wont-turn-on-appear-hung-sad.html
    Official Apple Documentation:
    http://support.apple.com/kb/TS1383?viewlocale=en_US
    I guess my actual story will make you believe that THIS SOLUTION actually works.
    "Let the iPod battery drain
    In rare cases, iPod might get into a state in which it needs to be drained completely before it can be reset. If iPod didn't turn on after you reset it, follow these steps:
    1. Disconnect iPod from all power sources and leave it disconnected for about 24 hours.
    2. Reconnect iPod to the Apple iPod Power Adapter or computer and reset it.
    I even tried the iPod on 2 computers and it was sort of detecting the serial # in Windows
    but mostly freezing up windows.
    4. " Let iPod's battery drain"
    Was the solution for my iPod 3rd generation.
    So now that the problem was fixed, I guess iPod is so terrible after all
    Just don't drop your iPod get it a nice case
    it took from 9pm December 2,2008 to about Dcember 2,2008 6:45pm
    roughly 20 hours.. so this morning when I left I pressed the button and it wouldn't turn on
    I thought maybe the battery was knocked loose but the battery was just so low or something
    To prevent this problem I guess whenever you ipod is low battery, charge it before it gets dangerously low
    As sad as it is to wait like 24 hours without your iPod just to pray that the problem is the battery or something and then it will power on..
    When it actually does power on you would see the apple Icon
    == When it was all said and done==
    I didn't really need to use "restore" option, i think itunes resynced what it needed.
    And thanks to this I upgraded to Itunes 8 .. which I was too lazy to do before
    ==STILL DOESNT WORK?==
    If you bought it less than a year ago... Warranty..
    https://selfsolve.apple.com/GetWarranty.do
    Enter your Serial# and country and it will be located at the back of your iPod under where it says 8GB or whatever (at least for iPod Nano 3rd generation)
    I always like posting solutions, so that someone like me can benefit from it.
    It is my understanding that if you do send in your iPod they don't care about the USB cord or headphones that came with it, so you just ship the iPod itself
    see here for some frequently asked questions.
    http://www.apple.com/support/ipod/service/faq/

  • HELP!  Ipod won't turn on, isn't showing up in iTunes or computer!

    I finally got iTunes 8 to install today (yeah!) and bought some stuff for my new iPod Nano 8GB (previously had a 2GB 2nd Gen) Some games and music videos. Worked beautifully. When I hooked it up to my computer to add one more game before I left (last minute purchase lol) iTunes said a newer version was available for my iPod, did I want it to install. I said yes, and now it won't work. At all. It won't turn on at all, hooked up to my computer or not, it isn't recognized anywhere on my computer. If I uninstall iTunes to re-install, will I lose my library? Will that even help? I can't do the five R's, cuz the thing won't turn on! What happened??? I need help

    brand new ipod less than 2 months old, occasionally it will crash and the apple logo would come up or the songs would skip but as soon as i turned it off and on it would be fine. today i tried to use it but it wouldnt turn on so i assumed it was flat, plugged it in to my speaker dock, nothing, plugged it into 2 computers and nothing, what can i possibly do to fix it?

  • Ipod Nano won't turn on unless plugged in!!!

    Please help! My Ipod nano, purchased just 2 years ago, won't turn on unless plugged in to an external power source, and when plugged in the screen has faint lines across the display and blotches at the sides! It was working perfectly fine until my battery went flat one day and all these problems popped up. Whats the problem and what should I do?

    Hello Exasperatin0n,
    And welcome to Apple Discussions!
    It's likely that your Nano's battery is shot and will need to be replaced. So I would start there and then worry about the display issue. You can choose to Apple repair the Nano, a 3rd party repair company (just do a Google search for iPod Repair and you'll get a number of results), or you can even replace the parts yourself.
    B-rock

  • Nano won't turn on!

    Hi all,
    I have had my nano 8GB for about four, maybe five months now. Its was working great until 48 hours ago when i went to switch it on, and it wouldn't come on. Thinking that the battery may have needed charging, i connected it to my PC but even that didn't make it come on. It seems to have comlpetely crashed and now i can't make it do anything. For a few days before it went down, i kept getting a message that there was a new version of ipod and itunes software to download, but because i'm on dial-up internet and because it was such a large file i didn't download it. Could this be why it has crashed and now won't even turn on? Or does anyone have an idea why this has happened and how to fix it?
    Help is appreciated.
    Many thanks in Advance

    Try these.
    My iPod won't turn on.
    iPod battery doesn't charge.
    My iPod won't wake up.
    Incidentally, the 8GB second gen nano didn't come out until September of this year, so you can't have had it 4 or 5 months.

  • IPod nano won't turn on or be recognized in iTunes or Vista

    We recently upgraded to Windows Vista, so I downloaded iTunes 7.2, then plugged in my ipod which was working fine, then it said it had to be updated, but first I needed to update something in windows vista. So I updated Vista and also looked in the help section for ipod and read this:
    Microsoft has released an update for Windows Vista that addresses a situation where ejecting iPod from Windows Explorer or by using the "Safely Remove Hardware" feature in Windows Vista could corrupt your iPod. Apple recommends Windows Vista customers who own an iPod install this software update. For information on how to install this Microsoft hot fix, refer to the "Update your software" section below. Tip: iPod can always be ejected safely by choosing Eject iPod from the Controls menu within iTunes.
    So, I thought that my ipod would get ruined so I did the "eject ipod" from the control menu in itunes, and after that my ipod never turned on again. What happened, did I do something wrong?
    I did the 5 R's already and it does not turn on. It is not even in my computer (device manager) and its not even being recognized in itunes. It just disappeared and it won't turn on. Please help!!!
    Thanks in advance.
    Dell   Windows Vista  

    I'm having a similar problem with my Ipod (40GB, now discontinued) here's my problem:
    My hard drive would spin up and then down and then up and then it would turn off. Also I would turn it on and flip to a song, it would be OK and then if I went to flip to another one the screen would freeze on me for a few seconds, then it would work then continue doing that until I got it to turn off. It did that for a few days and then the other day I turned it on and it wouldn't take me to my music screen and it came up with an Ipod that was dead and a link under it. It did this for a while and now I can't get it to work either, I turn it on now and it comes up with a folder and the apple support website and when I tired restarting it, the screen would come up with a check mark and say "Disk Mode" at the top and "OK to disconnect" below the check mark, and now Itunes doesn't recognize it and the hard drive spins and it goes on acting like iTunes sees it when in truth it doesn't.
    Hope someone can help!
    Erin

  • IPod Nano won't turn on.

    Good Morning - My Nano has been inactive for approx 6 weeks (left it in the in-laws house). Anyway I got it back today and I am trying to turn it on to update playlists, charge etc but when I connect it to my PC its not recognised by the PC and also it doesn't appear to be charging. I have tried resetting it without any joy. There is absolutely nothing appearing on screen
    I did notice that the apple icon appeared when I first connected it to the PC but nothing since. I have also tried charging it off the mains but still no joy.
    Any ideas??

    Try these.
    My iPod won't turn on.
    iPod battery doesn't charge.
    My iPod won't wake up.

  • Please help iPhone 4S won't turn on!

    Okay so this all happened months ago when ios7 came out. I tried to update my iPhone 4S software straight off of my phone in the settings to ios7 and it wouldn't work. So than I hooked my iphone up to my computer and went on iTunes and tried to update from there manually. Everything was working it said like 95% done updating but than it said this operation can't be done. Now, my iphone won't turn on, it goes to the connect to iTunes screen, but i don't know what to do I tried to connect it to iTunes and it didn't turn on. Please help I need this iphone to turn on!

    Assuming your phone was never jailbroken, try the following:
    Install the latest version of iTunes on your computer if it isn't there already from apple.com/itunes
    Reboot your computer
    Connect the phone to a USB 2 port directly on your computer, not to a USB hub. If it is a desktop or tower computer use a port on the back, not on the front
    Disable your antivirus and firewall
    Launch iTunes
    Connect the USB cable to the computer, but not to the phone
    On the phone hold the HOME and SLEEP buttons for EXACTLY 10 seconds, then release the SLEEP button but continue holding the HOME button - if an Apple logo appeared you held too long; the screen should be black when you release the SLEEP button.
    While still holding the HOME button connect the end of the USB cable to the phone
    Wait until iTunes acknowledges the phone, then release the HOME button.
    The phone should now restore. If it doesn't note the error number and post back.

Maybe you are looking for

  • How do I disable journaling on an external drive that won't mount?

    I'm trying to fix a hard drive that gives me the "Invalid content in journal" error. I've run the latest TechTool and Drive Genius and they say the drive is fine, except for its crippling inability to actually mount. Onyx and Cocktail won't touch it

  • Creation of Purchase order and workflow

    Hi all, I am very new to the srm system. I am working on a classic scenario in which the shopping cart is being saved and approved but i am unable to view the PO in the backend. Can someone provide me guidelines on how to view the PO in the backend a

  • JDBC stored procedure not working in Weblogic 12.1.3

    Hi, We are migrating from WLS 12.1.2 to 12.1.3. We have a JDBC stored procedure which used to work correctly under 12.1.2. I understand that 12.1.2 uses ojdbc5/ojdbc6 jars (11.2.0.x). After migrating to 12.1.3, the stored procedure is not working. We

  • When I sync iPad with Mac my photos are not loaded

    I Recently erased my Mac prior I backed it up to an external drive when I reloaded the information when I sync my Ipad the photos I have on the iPad are not there

  • No folios in viewer

    Our magazin in iTunes Store, there were 2 folios in it. I've submitted the third folio, but waiting for Apple review in-app purchases. But for all this time if you download application in store and open it there no issuses in it and "updating library