Help! my phone hangs up in middle of a call

My phone cuts out in middle of a call.  Either buts call off entirely or one party cannot hear the other.
I have received a replacement phone from Rogers but this phone does the same thing.
My BB Curve 8900 is only 3 months old.  Any ideas?  Need help

If its your original iPhone case that would be the problem.
If the case covers the top of the phone around the earpiece then it will also cover the sensors. Apple moved the sensors in the new phone so most full cover iPhone original cases will not work correctly with the iPhone 3G as it will thinkyou always have your head against the phone and so blanks the screen.
To test, remove phone from case and try it, think you will find it works fine.

Similar Messages

  • Phone falls asleep in middle of a call

    I was in the middle of a call and being asked to press 1 for such and such and the phone just went black even tho the call was still connected. Couldn't do anything to get the screen up and I had to reset. This never happened on my original phone. Anyone else? Any ideas what the problem might be?

    If its your original iPhone case that would be the problem.
    If the case covers the top of the phone around the earpiece then it will also cover the sensors. Apple moved the sensors in the new phone so most full cover iPhone original cases will not work correctly with the iPhone 3G as it will thinkyou always have your head against the phone and so blanks the screen.
    To test, remove phone from case and try it, think you will find it works fine.

  • HELP!!!!!!​!...my phones hangs on 70% reboot even after wiping and reloading OS 7. Touch 9850

    My phone hangs on 70% reboot. I wiped and re installing OS several times.  It says installation sucessful but still hangs when it reboots and get to 70%. please does anyone know what i can do to it. please help me. sugesstions will be kindly appreciated.

    yes you are tight exactly what is happening to  my phone. i have used desktop loader and app loader no  changes still.

  • My phone hanged while downloading new software, now its half way and cant switch it off also, plz help

    My phone hanged while downloading new software, please help, I cant even switch off

    Hello Shreyas79,
    The article linked below provides some useful troubleshooting steps that can help get your iPhone working again.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

    Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

    Hello HaithamOkeely,
    We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • Verizon - Iphone 6 plus - phone app getting hanged while doing 3 way conference call

    I am using VOLTE in IPHONE 6 Plus with IOS 8.1 and when I am trying to do 3 way conference: I called person A and then I add person B, then I see the following issues:
    I press Merge calls and calls are merged but still merge calls & Swap icon is enabled.
    When person A/B hangsup, the phone app is hanged and call is ended but it still shows that phone is ending.
    If I end the call, still the phone app is hanged and it shows it is ending.
    I cannot do any dialing in the phone when phone app is hanged and literally, I have to restart the phone only.
    Any other person cannot call me and it goes to voicemail.
    All the above issues were happening in IOS 8 and IOS 8.0.2 also. I did reset network settings too but it did not help.
    Can someone give an idea for any solution.

        mehulkothari,
    Thank you so much for those details. I want to make sure that you are able to use the feature without any issues. One thing that we might want to check out is that all the people that are a part of the 3 way calling is in the Verizon 4G LTE network. This could cause some issues if they are not. Have you been able to power the device off all the way and also remove the sim card for a good 10-15 seconds? http://vz.to/1EdNNMe  Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • Hi, Suddenly my iphone 3g phone's touchscreen's middle portion has stopped working.

    Hi, Suddenly my iphone 3g phone's touchscreen's middle portion has stopped working. while dialling through keypad or for adding new contact my 789 & Q to P in keypad is not responding my touch (not working). Please help me out in sorting out this problem.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Itunes 7 will not install; it hangs in the middle of "registering"

    I cannot install itunes 7. It hangs in the middle of "registering" and will not proceed any further. Can anyone please help me? I am so frustrated! Thank you very much.

    I spent 6 hours last weekend with this installation problem and came up with a process that seems to work - I've posted it a number of times and no one has said it failed for them. Lots of people have said it worked.
    First go to Control Panel, Add or Remove Programs and uninstall Quicktime and iTunes.
    Next go to the Microsoft web site below and download the Windows Installer Cleanup Utility. Install it, run it, then uninstall Quicktime and iTunes with it, if they appear in the list.
    http://support.microsoft.com/default.aspx?scid=kb;en-us;290301
    Go to apple.com and download the iTunes setup to your hard drive.
    It doesn't hurt to disable or pause your virus scanner before installing, just remember to enable it again when you're done.
    Try installing iTunes. You might still have problems installing iTunes because of QuickTime registry key access errors. If that happens, go to the link below, scroll about half way down and CAREFULLY follow the steps to change both Owner and Permissions on the keys that fail.
    http://discussions.apple.com/thread.jspa?threadID=688433&tstart=0
    NEVER DELETE REGISTRY KEYS MANUALLY USING REGEDIT!
    If this doesn't work, please re-post your problems. The more information we have to work with, the better we can understand the flawed installation process apple uses for iTunes and Quicktime and we can come up with solutions. It seems that the install problems are really with Quicktime rather than iTunes.

  • Problem after faulty update. Phone got disconnected in middle of update!

    Ok, here's my situation. I was updating to the new firmware and in the middle of it doing it'd thing, the cable got pulled out. The phone wouldn't start up any more so I had to do a hard reset. No problem I thought, I only backed up the phone the night before and I use MobileMe so I should be good. Well.... I'm not good. After it did the fresh restore it comes up with the "Set Up Your iPhone" screen. Has my phone number, has the date of my back up, looks fine. By the option "Restore from the back up of:" It has 4 options; My iPhone, My iPhone - Aug 5th 2008 10:08pm, My iPhone - Aug 5, 2008 10:09pm, and My iPhone. Whenver I try to use either of the two backups with the time/date stamps it thinks for a second and I get this error,
    "iTunes could not restore the iPhone (My iPhone) becuase the backup was corrupt or not compatible with the iPhone that is being restored"
    I wouldn't care because MoibleMe saved a lot of info, I just lost a ton of pictures of my 22 month old and some important stuff I had in Notes. The music and movies I can always dump back on myself. As well as the apps.
    Is there anything I can do to get it to see the phone as compatible? Or force it to take the restore? Any help will be GREATLY appreciated!
    (edit) By the way if it helps, the phone is linked to the Dell Dimension 8400, running XP and iTunes 7.7.1.11, but that's the iTunes that just updated tonight for me, not sure what it was at the time of the initial firmware update.
    Message was edited by: Quote the Raven
    Message was edited by: Quote the Raven

    Zigzak solved the rest of my problems from the bad update in this thread:
    http://discussions.apple.com/message.jspa?messageID=8012932#8012932
    Down towards the bottom.
    If anyone else is having similar problems the fix was to "Hard Reset" your phone and set it up as a new iPhone, don't use a back-up. And to completely delete all trace from your computer about that iPhone. Most importantly the Apps. Then redownload them all again after the reset and new phone set-up.

  • HP DeskJet D1660 hangs in the middle of a print job?

    My HP DeskJet D1660 occasionally hangs in the middle of a print job.  No error message appears but the light in the power button is blinking.  I have tried opening the printer queue and deleting the job.  The queue switches from status "printing" to status "deleting" and hangs with the queue never deleting the print job.
    Solutions tried: turning off printer, unplugging printer, unplugging and replugging the USB cable.  None of these clears the queue or restarts the printer.  Restarting the machine also did not unclog the queue initially, however, after a lot of cable unpluging I got it cleared and was able to use the printer again.
    Today It stopped in the middle of a print job again this time with an Excel spreadsheet (the first was printing a web page).  After trying some of the same fixes again but before powering down the computer I somehow got the HP Guided Solution up (I"m not sure what I did to trigger it).  Using this help system I managed to get the queue unclogged and the printer up and running following about ten different steps.
    Why is this problem starting to reoccur.  Is there a permanent fix or will I have to struggle thru the process of stopping and starting the print spooler every time it happens.

    Hi hp_issed & TXGabe,
    I understand that both of your HP Officejet Pro 8600 printers are not able to print correctly and quit in the middle of jobs.
    What is the firmware version of the printer? click here to find out how to retrieve it.
    Which Windows operating system are you running?
    Is the printer connected via USB, ethernet or wireless?
    Is the power to the printer connected directly into a wall outlet or a surge protector?
    Thank you,
    I worked on behalf of HP.

  • Nokia 5610 new phone hang when press enter key; it...

    Anyone facing this problem? I just brought couple of days only, I found the phone hang when i switch ON it and press Enter key after the PIN code. It looks no response and keep displaying on that screen.
    Solved!
    Go to Solution.

    15-Sep-2008 09:25 AM
    merceleong wrote:
    I sent it to reinstalled the software and it looks ok now but, anyone know for new phone, how long the battery will last? My unit found only two days without playing music all the time.
    Just an advise
    On it's first time fully charge and discharge - vice versa for three times. After that don’t drain your battery every day to 10-20% of its charge. You can actually expect battery problems by draining the battery frequently.
    Roughly every 30 charges, deliberately discharge your battery to 10-15%, and fully charge to 100% afterwards.
    This will help maintain the accuracy of the “fuel gauge” on the device (your battery meter or scale). It has nothing to do with the battery memory but helps maintain the accuracy of the device’s percentage of battery charge left.
    Good luck

  • Phone hangs and restarts

    Hi Nokia Support,
    I had purchased Nokia 500 a month ago and the performance is really bad.
    The phone hangs and it just restarts automatically . When I had purchased it, the reception was very poor and when I searched in the nokia support page,  they had asked me to reinstall the software. I had done the reinstallation 3 days back and now I am still facing the restart problem .
    The phone just restarts or hangs. Sometimes I have to take the battery out to force the restart , otherwise the phone just stays in the hanged state.
    Could you please  help me out,
    Regards,
    Subash
    Moderator's notes: Contact details removed. It's not advisable to share your personal information online.

    Hi mssubash,
    Thank you for your post and welcome to the forums!
    We're sorry to hear about all the trouble you've had with your Nokia 500. Try to reset your device by dialling *#7370# followed by your security code (the default security code is 12345, unless you have changed it). This will wipe all data off your phone, so it's best to first backup your data using Nokia Suite. After your phone boots up, restore the backup, but remember to untick settings in the restore prompt box. 
    If the issue persists, we would advise you to visit your local Nokia Care point and let them have a look.
    Let us how you get on,
    Puigchild
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • Phone hangs up on its own minutes into incoming call

    Sometimes when I get a phone call, a few minutes into the conversation my phone hangs up. What's going on? I'm not pressing anything (I don't think), and it does it fairly regularly.
    Thanks for any help!

    I was with verizon for years, great coverage in my area, which due to some military bases is a poor Cell phone area, Wanted my iphone so i switched last week, coverage kinda suks, I do drop calls, I got the phone for wi-fi internet So I'm happy

  • Phone hangs and restarts automatically after sim c...

    phone hangs and restarts automatically after sim change in my lumia 520.
    why is it happening? Can anyone help?

    Teh SIM you put in was that anew or a used SIM? if not new get it replaced for one.
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Phone hangs when receiving calls

    I have a E66 about 6 months old with the latest software (210.21.007) installed. When I receive a call, the phone hangs. All I can do is take the battery out and restart the phone. It happens about every 8th call or so.
    Please help.
    Thanks.

    I just bought an E66 and I am having the exact same problem.  The phone just hangs when I try to receive the call and I have to remove the battery to reset it.
    This happens around every 8th call just like to previous poster, I am also running firmware 210.21.007
    Will really appreciate if someone can give a solution for this as this is very irritating. 

Maybe you are looking for

  • Is it possible to have a scrolling text field in a quiz slide?

    I'm trying to build a quiz, and there is too much text that I need to display for the question. Is there any way to implement a scroll-able text field in a quiz slide?

  • Dual Booting Ubuntu Linux and Windows on a RAID 1 setup

    Hi, I just bought a Lenovo W530 with Windows 7 and two 500GB hard drives in a RAID 1 setup, is there a way for me to install Linux with dual boot while maintaing my RAID 1 setup? Thanks. 

  • Unable to View output in .rtf format

    Hi guys, I am new to BI publisher. I want to view the output in .rtf format When click on view output I am getting an error "Unable to find the published output for this request" and then "No output file exists for request xxxxxxxx" Do we need to app

  • Need Information of cisco WLC 5508 LAG Interface

    HI We have cisco WLC 5508 in our network and right now ,this WLC is connected to two ports of each core switches.Both CORP and GUEST SSID are configured on this WLC. Now we want to segregate the trafffic og GUEST to on core switches from WLC. SO my q

  • Autosave vault won't take serial number

    FCP 7 is second language to me after Avid.  Trying to access a backup of a project.  On opening, I get a box asking for name and serial number. Put it in, I get a message saying that the number is invalid, and then a crash message that Final Cut Expr