HELP!!! my phone is roaming inside my house

HELPPP PLEASE!!! My phone says it's roaming in my house where I usually get very good service. What's happening is that my phone has 3 circles of service then a space then it says 3g with no Verizon thing. I think that it is connected to a third party service like if you were to go to mexico you know how it changes your number while you are there and there's a different carrier it says you are using well I think that's what has happened because it says my phone number is 0000001581 which Is not my number. Also when I try to make a call it says this exactly "Welcome to Verizon Wireless please hold while your call is transferred to a external operator where you should be able to connect your call with a credit card , calling card, or via collect call. PPLEASE HELP PLEASE

Thank you for providing that information PlobusForMayor. I am checking at the area looks great for coverage. Does the phone improve once you power the phone off and back on? Try this http://vz.to/1r5fAnD to see if it restores your 3G. Please keep us posted on the outcome.
CandiceH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Similar Messages

Wireless VoIP roaming - getting an 802.11g phone to roam with CCX / CCKM

Hello,
Our group is facing a pretty difficult issue at the moment, we are trying to deploy a wireless Avaya VoIP phone at one of our sites in Australia.
The site in question is located in Western Australia, which is on the other side of the continent to where our 5508 WLC is (in Sydney), so there is a latency of abouy 60-80ms between the sites. When testing the phone at the Sydney location, we're able to authenticate the phone via a number of methods (802.11x, 802.11x FT) and the phone can roam fine. When testing at the WA location, the 802.11x authentication method drops the call when roaming, and the 802.11x FT authentication method has about 2 seconds of dead air during roaming / reassociation.
The avaya phone supports a few different methods of "fast handoff" - CCKM and OKC - and we've only got the OKC (802.11 version of fast transition) method to work, not CCKM. The phone reports error messages when trying to connect to the network with CCKM enabled - specifically "No CCKM AP's" and "No CCX AP's".
So I have some questions...
1) Is a 60ms latency between sites a dealbreaker for wireless voice usually?
2) The voice engineer is convinced that CCX is disabled on the WLAN. My understanding of CCX (according to online Cisco docco) is that it can't be switched off. Is this the case? I know CCKM can be disabled (in the Layer 2 Authentication options) but can CCX or CCKM be enabled / disabled anywhere else?
3) The voice engineer has a point on one front - if we do a command "show ap ccx rm [APName] status", the command outputs "Beacon Request ..... Disabled." This seems to be related to CCX Location awareness - but even after switching this on in the WLC (both globally and for the WLAN), I cannot get this to enable.
3) We have had some minimal success getting the phone to connect with only CCKM Authentication enabled. The phone could not roam. When we did this, I looked at the Client information in the WLC of this device and the CCX Version read "Not Supported." Does this perhaps mean some kind of CCX compatibility problem?
4) Is there much of a difference between OKC (Fast Transition) and CCKM in terms of roaming time? I.e. are we better off trying to install a WLC at the location rather than getting this work remotely.
We're a bit lost on this. Anyone that's had experience in getting Wireless VoIP phones to roam on a wireless campus before, particularly where the WLC is remote, I'd love to hear from you.
Thanks,
Dave

Hi, thanks Steve. Aironet IE is enabled.
The encryption is news to me. We intially tried WPA2/AES & WPA/TKIP together but had no success at all. We then moved to WPA/TKIP, and we were able to get the phone to connect to the WLAN using the CCKM settings, but it doesn't roam at all & the WLC reported the Clients CCX version was "Not Supported".
I think the phone has CCX version 4. Are you certain that the phone will only support WPA & WPA2 with CCX v5? Just that this sounds a little strange, the phone's documentation claims to support CCKM, but if you're right then there's no way we can secure our phone conversations? In previous testing, we did actually temporarily drop all authentication / encryption and the roaming worked perfectly.
Thanks for your help...

I dropped my iphone and when i picked it up it was working but as soon i got inside the house and turned it on, the screens lights up black then it goes completely white

he;lpp!! i dropped my iphone and face down on the screen andwhen i picked it up it was working and everything , when i got inside the house and checked it the screen goes black then it goes white and stays then shuts off and the same thing happens when you push the home button, plus im still able to recieve and get text messages i just cant see cause the screen.... help me like NOW !!!!!!!! haha i really dont wanna take it to a shop and pay money !!

You can try resetting it: Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). If you are able to see the Apple, then the reset is in progress, and the Home screen will display shortly.
If you are not able to see the Apple, then you are going to need to make a trip to the Apple Store.
Cheers,
GB

Constantly getting Failed SMS messages inside my house.

I have had issues with a couple cell phone making calls inside the walls of my house, but as of last week now I am getting failed SMS messages that say !Message Not Sent constantly, but yet a large chunk of them do go through. I have never had this issue previously.
Is there anything I can do to fix this? Either with the phone, or something I should look for with the house? It's a brand new built house, so I wouldn't think it would have material in the house that stops them.

Sounds like something changed the wireless signal strength at your home. Did a new house get built blocking your reception from the tower? Another structure? Has Verizon been working on the towers in your area? If you had a weak, marginal signal before, even the weather changing could cause problems. I'd call Verizon and see if anything is happening to the network in your area. They can also check to make sure your account is set up properly and that you have the latest PRL on your phone.

IPhone 4s 5.0.1 problem - Signal full but 3G network keeps dissappearing inside the house and showing only 'o'.

I keep having the above problem that annoys me a lot. Although signal is showing at full bar but 3G network is almost always dissappearing inside my house, leaving me with an 'o' symbol. This doesn't happen with the iPhone 3G and my 4 y/o Nokia where the 3G symbol is always there. I've done all, restore firmware to 406, reset network settings, etc. But those don't seem to work.
Any ideas how this happen? Any suggestion is much appreaciated. Thanks.

So I am guesing probably the iPhone signal reception issue came from the iPhone SIM card reader itself not adjusting to the SIM chip.
OK, here is the trimmed micro SIM card comparison:
Hope this helps!

HT1689 i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

i have my daughters iphone 3, i want to use it as an i-pod, but it keeps receiving messages from some her friends is there a way to stop this from happening, please help, my phone is maxed out and would really like the storage for music, thanks

It sounds like it still has her information on it, so it might be efficient to navigate to Settings, then General, then Reset, then Erase All Content and Settings. You can then set up the phone again, using your information. This way the phone will be yours, officially, and her data and information will be removed.

My "Find My iPhone" says on map that my phone is here at my house...but it's not! So...I guess that feature doesn't work?

My "Find My iPhone" says on map that my phone is here at my house...but it's not! So...I guess that "Find my iphone" feature doesn't work? Very frustrating. My iphone volume might be turned off ...does that make a difference if you use the sound locator on the find my iphone?
Tech support INSISTS that the iphone locator on i Cloud is accurate. How can it be? My phone is NOT here!

Jennie
Is your device showing a green or grey dot?
Here is some background on how location services works.
http://support.apple.com/kb/HT1975
Here is what happens if the device is turned off
http://support.apple.com/kb/PH2592?viewlocale=en_US
This linksays if it can't be found it will show the last location for 24 hrs and then it will clear the map.
http://support.apple.com/kb/PH2698?viewlocale=en_US
Mine always works fine... it's say within 25' of where I am.

Help,my phone is in recovery mode and iTunes shows error 17

help,my phone is in recovery mode and iTunes shows error 17

http://lmgtfy.com/?q=iPhone+error+code+17

Why can't i connect to my iphone after updating to 7.1.1? i don't even get the screen that lets me login into my apple account??? plz help my phone was stolen and through help of the police i recovered it and now i can't access my phone

why can't i connect to my iphone after updating to 7.1.1? i don't even get the screen that lets me login into my apple account??? plz help my phone was stolen and through help of the police i recovered it and now i can't access my phone

You must have had find my iPhone on, or it was locked by your phone carrier.
Call your our cell carrier first.
then log on to a computer to iCloud to erase your iPhone.
NOW... You will be able to setup with a backup.

How does Roaming work? Phone stays roaming

Can someone explain how roaming is supposed to work?
I've noticed that the phone starts roaming (probably legitimately) but when I return home where Sprint service is available the phone will stay in roaming until I Turn the Connection off, then back on.
I have a BB Curve 8330 running OS 4.5.0.131 which is the latest supported by Sprint.

Yes, the setting is Automatic.
What I'm asking is why it doesn't come out of roaming when I re-enter the Sprint coverage area.
I want it to roam when necessary since my plan includes roaming. But when it roams the indication is 1x instead of 1xev.
I'm not sure what that means but I suspect it is a less that optimal speed for the Curve.
So, basically, at what point in signal strength should I expect the phone to switch back over to Sprint? Or, once it enters roaming automatically will it stay there until I manually cause it to move back to Sprint by disabling, then enabling the Mobile Network Connection. Or, does this indicate there is a problem with the phone that needs to be serviced?
It seems to me that the preferred network should always be Sprint (for me). So, once Sprint coverage is adequate the phone should revert back to the Sprint network automatically without manual intervention. So, I'm asking if that is true or not and how, if any, way there is to tell why it is not happening.

Plz help my phone E50 is not starting due to softw...

plz help my phone E50 is not starting due to software update it just blinks Screen & go off....
when 2 min. left for completing the update it goes off & now its not starting...
Plz help is it repairable?
Thanks
Usman Khan

I do not know the E50 but this helped people who had similar problems with other phones.
If this fails ..you need to find your nearest Nokia Service centre to re-flash your FW.
http://www.allaboutsymbian.com/support/item/When_everything_goes_horribly_wrong_in_Nokia_Software_Up...

I have a net gear wireless router and a APE working great inside the house, but the wireless signal is weak in the backyard, can I get a net gear extender for the back and it will also send my music to the airport express?

I have a net gear wireless router and a APE working great inside the house, but the wireless signal is weak in the backyard, can I get a net gear extender for the back yard and it will boost our wo
Ireless signal and also send my music to the airport express? Or does the airport express work as a stand alone hub?

Trust me when I say this coming from 20 years of experience.
Get a powered external drive, format it 1 Partition Option: GUID and OS X Extended Journed as the format in Disk Utility.
Download and install Carbon Copy Cloner, clone internal drive to external drive.
Set a schedule to remind you to do it at least once a week, keep it near your charger.
When you plug your charger in, do plug the clone and power the machine up, set the display to sleep only,
CCC will do the rest.
If you want to boot from it, hold the option/alt and select it Startup Manager.
I've seen many TimeMachine and TimeCapsule nightmares and so far haven't seen a problem from anyone using a bootable clone.
It's simple, it's easy, it's more reliable and more powerful than what Apple does and it only takes plugging in a extra cable.
Make as many clones as you want, keep them time seperated, off site etc. etc.
Cables don't have network issues, clones can be verified in seconds merely by booting from them.
Clones protect your productivity, your up in seconds on a clone despite even the hard drive dying.
Software problem? No sweat, boot of the clone and reverse clone your problems away.
If you want to fuss and muss with half implemented TimeMachine and TimeCapsule network headaches then prepare to suffer.
I don't like to suffer, I bought a Mac not to suffer, but it appears you do with TimeMachine and TimeCapsule.
Most commonly used backup methods

Help, my phone says no service, connect to iTunes to restore. I do and it says it cant. now what?

Help, my phone says no service, connect to itunes to restore. i do this and it says i cant restore. now what?

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

3g signal outside house, no signal inside - old house.

I'm in the Chicago area so obviously have coverage. However, as soon as I get inside the house the signal is practically non-existant. It switches between 3G with no bar, and 1x with one bar. The house is old so there shouldn't be any high-tech insulation blocking the signal. Anyone have any ideas?

But it could be interference from old wiring, What about others devices and being in your house

How do I get support help by phone?

How do I get support help by phone?

hi Bob,
You can call Adobe support at 800-833-6187 // or using this link : http://helpx.adobe.com/in/contact.html
Cheers,
Kartikay Sharma

HELP!!! my phone is roaming inside my house

Similar Messages

Maybe you are looking for